Related
I am not able to connect my Galaxy S2 via Kies.
It always throwing error
"Reconnect the device in Samsung Kies(PC Studio ) mode. Current connection mode not supported by Kies".
Are you guys able to connect?
Am I doing anything wrong?
Also I am not able to find download location for Kies(mini) for MAC. Its mentioned in Samsung website but no download location.
You have to disable the USB Debug option from your phone.
Settings -> Applications -> Development -> Untick the USB debugging option.
Hope it works fine for your.
Note: If you are trying to upgrade your phones firmware i'll definitely go to the Galaxy S II Android Development section and check the [ROM + Guide]Official i9100XWKDD/KE1/KE2 download for Odin Flash and Root Guide POST.
Regards,
Sebastian Moreno
Thanks , able to connect now.
not working for me
Hi I have the same problem. Debugging is off.
I also tried to connect with sd card removed but no luck.
Do you guys have any suggestion?
I read on internet but found no other tropubleshoot.
It seems there is a problem with MTP drivers not being installed.
I rebooted phone, computer.
I use Windows XP.
Any idea?
Thanks in advance!
Cuz80 said:
Hi I have the same problem. Debugging is off.
I also tried to connect with sd card removed but no luck.
Do you guys have any suggestion?
I read on internet but found no other tropubleshoot.
It seems there is a problem with MTP drivers not being installed.
I rebooted phone, computer.
I use Windows XP.
Any idea?
Thanks in advance!
Click to expand...
Click to collapse
Try to turn debugging on, and then turn it off. That helped me.
....in device manager the diag drivers and the port show up fine. I can connect with Odin in recovery and connect through ADB. I have another Tab (same model) and connects fine. Kies is installed and activated modem in diag screen and toggled. I uninstalled the drivers, wiped it back to factory and reinstalled the drivers and tried to connect again, but no luck. I can also read the sd card as well. Any ideas?
Reading some more...
....in other posts similar (which have no conclusions) it appears net.cdma.configurable.mode is set to "-1" and needs to be set to "1". Anyone know how this can be done?
a little more history into this issue; it happened after an meid repair and after I rebooted tab, were it once connected....it never did again. Anyone? Any clues or have i figured out a way to permanently turn this tab into a wifi only model?
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can't find a solution nowhere.
I have the same problem, been trying to search online for few days, can't find the solutions.
Sammguy said:
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can find a solution nowhere.
Click to expand...
Click to collapse
bryanling said:
I have the same problem, been trying to search online for few days, can't find the solutions.
Click to expand...
Click to collapse
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
shaggy_kobain said:
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
Click to expand...
Click to collapse
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
bryanling said:
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
Click to expand...
Click to collapse
Enable developer mode (tap on settings, about and then tap on the build number 7 times to enable developer mode).
Then back to settings, developer options and turn on usb debugging.
Sent from my Note 3 via Tapatalk
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Sammguy said:
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Click to expand...
Click to collapse
Did you disable the mtp application?
drewcam888 said:
Did you disable the mtp application?
Click to expand...
Click to collapse
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Sammguy said:
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Click to expand...
Click to collapse
I too am having this issue... it is quite frustrating. I rooted using towel root and that worked fine up until the beginning of September then USB was gone gone gone!. I was thinking of just doing a factory-restore of my phone, but I am not sure that is possible with having Towel rooted my phone. I just don't know what steps to take. Any help would be greatly appreciated!
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
It takes two to tango; how do you know the problem is not the PC?
Older versions of stock software actually put the phone in Airplane Mode when you were using USB 3.0, and had an inactivity timer or something that would turn the USB link off after a while. That didn't happen if you were operating on a USB 2.0 link.
So, if your PC has any non-USB 3.0 ports (the connector will not be blue) you could try using a USB 2.0 port.
Sometimes intermittent behavior is caused by bad cabling or a damaged connector, so a second thing to try is using a replacement cable and/or alternate ports. (Don't buy bargain basement eBay $2 cables btw - you will get what you pay for)
good luck
nancyvf8 said:
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
Click to expand...
Click to collapse
Is this a phone that you flashed a custom rom, rooted, or unlocked the bootloader?
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Same Problem
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
I am having The same problem with Samsung S5 900F and Windows 7
Alejandro R said:
I am having The same problem with Samsung S5 900F and Windows 7
Click to expand...
Click to collapse
Same problem my phone is already with android Lolipop I think this have something to do
Alejandro R said:
Same problem my phone is already with android Lolipop I think this have something to do
Click to expand...
Click to collapse
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
screem_3 said:
+1 i think it might be due to the android 5
Would really appreciate if any expert can let us know for sure
Click to expand...
Click to collapse
me too I need the phone working with LTE 700/1700 bands
Me too... Any Solution for that ?
SM-G900F NOT WORK ON DM+MODEM+ADB
maybe a solution
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
He's right! turn on CP Logging then do it and it worked... The only problem I did face which could have been something different was when I used the app Samsung PHONE INFO and tried to get to the service menu it would come up blank, after disabling CP and back to MTP + ADB it came up again.
Also, I am on G900V with their newest firmware OE1 and there is no option for CP Logging anymore, it automatically detects it like it did in KitKat. (Just a side note)
I had faced the same issue
Booted into recovery and enabled CP logging. it works perfect
Quick Question
screem_3 said:
Hi Everyone
i am trying to enable the LTE Band 41 in my G900F HK version.
the phone is Running stock, Rooted android 5 BOA3 ★ DevBase by ALEXNDR
when i go to the usb setting and change it from MTP + ADB to RNDIS + DM + Modem mode, My PC will remove the phone as MTP and that is it, i mean its like my phone is not plugged in. i have looked everywhere for a solution but could not get anything related to the phone not shown in my device manger.
Also i have set the USB Debugging on, but its not helping.
I have plugged the phone to 2 laptop win7 & win8, as well to the mac running Virtual Win 7.
If i downgrade to stock rooted 4.4.2 and put the phone in RNDIS, my win 7 PC will have no problem in detecting the phone and install the rndis driver.
please help
Thank you
Click to expand...
Click to collapse
Hey, just a quick question, i'm currently attempting to do the same procedure on my Ulefone future, and i'm having a tough time finding a way to access the hidden advanced usb settings menu.. Now, saying that i'm a neophyte with the higher end of android tinkering would be an insult to neophytes everywhere. I am utter clueless when it comes to this stuff.. My phone has been rooted and every pre-requisite has been met, i simply cannot find the code for accessing this blasted hidden menu, please let me know how you accessed your usb setting menu.. I would appreciate you and love you, platonicly, forever.
thaaaaaaaaaaaaaaaaaanx.. it's working 100%
Acquarius7 said:
Sorry the intrusion, i had the same problem and i had fixed it by rebooting the system in recovery and enabling cp logging, after that i was stuck in cdc serial and solved installing keis, Hope I help you guys
Click to expand...
Click to collapse
I would like to thank you so much for this solution. I spent a lot of time trying to find a solution for Samsung S4 beeing not recongnized by the PC in DM + MODEM + ADB mode and you gave me the solution. Thank you.
Hi,
dont know if here is the correct section, if isnt tell me.
i have a samsung galaxy s7 edge that the screen does not work (its black) but the touchscreen still alive, now the problem is that i have some data i want to backup but i cant unlock the phone beacuse i dont know if im using a wrong password or something else... i can think of some solutions, but i dont know if they are possible.
1) download some apps to screen mirroring the phone on my pc: the usb debugging mode is not enabled.
2) enter into recovery mode and use the adb: the pc recognize the phone but when i tried to use the commands adb shell,push,pull... reponse with "error: closed" msg, i think its because usb debugging mode is not enabled.
3) clone the memory of the phone and install it on some emulator or another phone???
4) i have another s7 edge, change the screen until i backup the data???
Someone can help me or give me some tips? i dont know what to do now, im googling a lot and anything works, all because USB DEBUGGING isnt enabled, perhaps if i can enable it using the adb without unlock the phone (remember i dont know if im using the correct password i need some tries).
Thank you,
Cheers.