Hello I've got problem with my galaxy s4 i9505
So if i want to flash something via odin it's writes complete(write) operation failed.
My device is currently rooted I've install CWM mod somehow even odin said its failed so thats realy wired. At first i just wanted to update android from 4.4.2 or 4.4.4 i dont remember to latest official 5.0.1 and it failed and device are bricked. I've Don't know what to do so i flashed CWM and fortunately it works. Couple days later I've installed Resurrection Remix rom on android 6.0.1 and ti works quite well. Currently I'm running some s6 port rom on android 5.1.1 and there are some issues propably because I've don't install recommended modem & bootloader(current modem is i9505xxugne5) because i just can't. Tried to use another odin versions usb ports/cables and another pc's/windows versions. Any ideas how to get this work. I haven't any problems with odin on my previous phone galaxy s2 plus. Sorry for bad English and Thanks very much for help
Which file is giving the error in Odin? Have you tried different version of Odin, USB cables, and USB ports?
@audit13, he did mention trying all of the above mentioned.
@xOwczarek, do you have the Samsung drivers installed? And if you do, did you install the separately or with Kies?
First I've installed drivers and it don't work then kies and same.
Sent from my GT-I9505 using XDA Free mobile app
did you deactivate kies before starting and remember to run odin as admin ?
And are you using the original cable or have tried with the original cable?
Yes I've use orginal cable. And tried others.
Sent from my GT-I9505 using XDA Free mobile app
xOwczarek said:
Yes I've use orginal cable. And tried others.
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
You may be able to use the app FlashFire to flash an official stock rom directly from the phone. You could also flash a modem and bootloader with that app, but the problem is that it will only work while on a stock rom.
My suggestion is: Try and flash a stock rom using that app, and so, your modem and bootloader will be probably updated too. Then try to, either root, or flash a custom recovery back. I recommend TWRP for the recovery.
Rooting first then recovery
Or
Recovery first and then root
They both work.
GDReaper said:
@audit13, he did mention trying all of the above.
Click to expand...
Click to collapse
My apologies to @xOwczarek for not reading more carefully
Thank you for bringing it to my attention. I'm embarrassed but this error needed to be pointed out
Does the Odin error always occur after trying to write a certain file? What about using heimdall (http://glassechidna.com.au/heimdall/) to flash the firmware?
The stock rom came from sammobile.com? What bootloader is on the phone?
Nevermind i've used another pc and it pass! I've used this firmware: http://www.sammobile.com/firmwares/download/44775/I9505XXUHOB7_I9505XEOHOB3_XEO/
and orginal cable.
Thanks everyone for help
Related
I've always used Teamepic root and then flashed my rom, that didn't work with the S4, at least for me.... I couldn't get into recovery.
So I tried many other ways, every way I have found on the internet and if it's not one thing it's another. SSU will either say binary not available or when I am installing from recovery (cfroot) it says install aborted. I've flashed to the stock rom so many times since yesterday I'm about to go nuts, but nothing will get this phone rooted, please help!
April
aprilx said:
I've always used Teamepic root and then flashed my rom, that didn't work with the S4, at least for me.... I couldn't get into recovery.
So I tried many other ways, every way I have found on the internet and if it's not one thing it's another. SSU will either say binary not available or when I am installing from recovery (cfroot) it says install aborted. I've flashed to the stock rom so many times since yesterday I'm about to go nuts, but nothing will get this phone rooted, please help!
April
Click to expand...
Click to collapse
What firmware are you on? Mf9, mja, ect...
I am on mf9
What version of Odin are you using?
Sent from my SPH-L720 using xda app-developers app
I had two. One was an older one so I updated and tried a few times earlier. 3.195 I believe Im not home to check at the moment.
aprilx said:
I had two. One was an older one so I updated and tried a few times earlier. 3.195 I believe Im not home to check at the moment.
Click to expand...
Click to collapse
Easiest way to root.Use odin to flash the tar file of agats kernel. http://forum.xda-developers.com/showthread.php?t=2260536
This kernel has a script that will root for you. After that reboot and your rooted.you still will have to odin a recovery to flash a rom but this is the best way . Any time you need help pm me
Sent from my SPH-L720 using Tapatalk
shizkoff777 said:
Easiest way to root.Use odin to flash the tar file of agats kernel. http://forum.xda-developers.com/showthread.php?t=2260536
This kernel has a script that will root for you. After that reboot and your rooted.you still will have to odin a recovery to flash a rom but this is the best way . Any time you need help pm me
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Thanks
Do I have to wipe the phone again and reinstall the stock firmware first?
I was installing a custom ROM onto my ATT GS4 with little experience and It ended up soft bricking my device. I was running MF3 firmware before I tried installing the custom ROM. I was trying to install the Gummi ROM with the custom ROM app and now my phone is soft bricked and will not fully boot. I have tried flashing many things and tried Kies and nothing will work. I don't even have a recovery. I have tried flashing MF3 stock to it and it still won't work.
JustSoHyper said:
I was installing a custom ROM onto my ATT GS4 with little experience and It ended up soft bricking my device. I was running MF3 firmware before I tried installing the custom ROM. I was trying to install the Gummi ROM with the custom ROM app and now my phone is soft bricked and will not fully boot. I have tried flashing many things and tried Kies and nothing will work. I don't even have a recovery. I have tried flashing MF3 stock to it and it still won't work.
Click to expand...
Click to collapse
ODIN the MF3 firmware and then use Safestrap. Use the search function to find info and threads about it. And make sure you do a lot of reading so you know what to do. Good luck.
scott14719 said:
ODIN the MF3 firmware and then use Safestrap. Use the search function to find info and threads about it. And make sure you do a lot of reading so you know what to do. Good luck.
Click to expand...
Click to collapse
I've tried installing MF3 firmware but it always fails at the very end with the "FAIL! (Auth)" message
JustSoHyper said:
I've tried installing MF3 firmware but it always fails at the very end with the "FAIL! (Auth)" message
Click to expand...
Click to collapse
Do you know what firmware you were on before you tried to flash a custom recovery? Flash that firmware with odin.
Sent from my Nexus 5
jd1639 said:
Do you know what firmware you were on before you tried to flash a custom recovery? Flash that firmware with odin.
Sent from my Nexus 5
Click to expand...
Click to collapse
It still won't work... :/
JustSoHyper said:
It still won't work... :/
Click to expand...
Click to collapse
Usually it's a usb port/cable issue. Use the value that came with your device and use the usb ports on the back of the pc. Make sure they're usb 2.0 not 3.0
Sent from my Nexus 5
jd1639 said:
Do you know what firmware you were on before you tried to flash a custom recovery? Flash that firmware with odin.
Sent from my Nexus 5
Click to expand...
Click to collapse
I was on 4.3 when i tried installing the custom ROM
JustSoHyper said:
I was on 4.3 when i tried installing the custom ROM
Click to expand...
Click to collapse
Try the mk2 tar file in Odin then.
Sent from my Nexus 5
jd1639 said:
Usually it's a usb port/cable issue. Use the value that came with your device and use the usb ports on the back of the pc. Make sure they're usb 2.0 not 3.0
Sent from my Nexus 5
Click to expand...
Click to collapse
I've tried all of my ports and i don't have the original cable :/
jd1639 said:
Try the mk2 tar file in Odin then.
Sent from my Nexus 5
Click to expand...
Click to collapse
Where can i find that mk2 tar file And btw im on an ATT gs4 so it's and SGH-I337.
JustSoHyper said:
Where can i find that mk2 tar file And btw im on an ATT gs4 so it's and SGH-I337.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
Click to expand...
Click to collapse
IT WORKED! Idk if I could ever thank you enough! I have spent 3 months trying to get it to work! You're a life saver!!!!
Hi guys, I'm new to this forum but have read many things on it and have gotten lots of help, but this question NEEDS a new thread!
I have been using my International Galaxy Note 3 (9005) for about 9 months, I bought it from Kogan in Australia and just recently I decided to root it using CF-Auto Root and then flash X-Note build 18.
A couple of days ago I decided that I didn't like X-Note that much so I tried and flashed Omega Rom. That all worked fine but I didn't really like any of the custom Roms and I just wanted to go back to stock.
So I download (for the first time) the newly released KitKat Australian SM-N9005 Firmware from SamMobile and tried to flash it through Odin straight over Clockwork mod recovery and over the Omega Rom that I currently had installed. When it finished it said that it had failed and something about the Ext4 not being valid, I was shocked (his had never happened to me before with Odin).
I no longer could boot into recovery and the phone said to plug it into Samsung Kies 3 and do an emergency recovery, So i plugged it in and it said that the device was not recognized, and it would not show up in the device list within the emergency recovery window.
So I did a lot of Googleing and came to the conclusion that It was probably the N9005 Australian Rom not being compatible. So after all of these errors and such I booted back into download mode and tried to install one of the other Kitkat Official firmwares that had worked fine before.
It installed just fine and Odin said reset and I unplugged it. but when it booted for the first time I was getting boot loops continually and when and now as I just start to go through the setup process the interface lags and it flashes black a few times and says I have no Sim card in (Which I DO!) and it restarts several times and IS ALL OVER THE PLACE!
It also takes about ten seconds or more after pushing the power button in to get the display to display again and it is unusable and behaving all weird.
The first few times I flash the stock firmware on it through Odin, it remembered my wallpaper, which is really weird seeing I factory reset it!
My best guess is that Flashing it through Odin and and factory reseting it is just not completely clearing it/wiping it and the system is all messed up and stuff is left over.
I don't no WHAT to do!!!! I can't even use it and it's driving me crazy can somebody, please help me!!!!
Thank you!
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
Look in to omega rom which version of android base it's used, flash same version of stock rom, may not available for Australian but u can flash other countries stock rom, try this & good luck.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Hi why would I have to flash the same android base as omega and what actually is Android Base?
Also will this fix it and how do I check the android base?
Thanks
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
If omega rom has higher bootloader version, it will not allow to downgrade if Australia stock firmware version is lower, to find out of version u must look at omega rom u flashed.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, but I was able to flash the Poland Kitkat Rom and another one but I still have the problems above, flashing Roms is not the problem?
Bro poland xeo has still OLD d3 version which release in may, try to flash LATTEST BTU UK ROM
Sent from my SM-N9005 using XDA Free mobile app
Should I try a 'Mega Wipe' to completely format it? - http://forum.xda-developers.com/showthread.php?t=2501577
And I was just reading something about no signal and IMEI, I have no signal and it says no sim card, does that mean I've lost my IMEI forever??
When I was installing x-note I thought EFS backup meant a CMR full backup
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
jdomadia said:
As long as I know Dr.ketan tools & utility is for SM-N 900 3g version note3, but u can read more & do it as you want.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Yes the original was, but this script is modified for the n9005 like the guys says in the link.
Will this mega wipe fix my phone??
I don't know about mega wipe, if I will be in your place before making case complicated I would prefer to flash LATTEST STOCK ROM.
Sent from my SM-N9005 using XDA Free mobile app
same problem if you find any solutions plz share
I will reply if I find a solution my friend and Visa Versa if you do too.
PLEASE! other users of XDA can you help me and 'hosamkrm'. I will happily donate some money to the helper and give him a big thanks!
Dear friends, I need your help.
I dicide to install custom ROM (Omega 38) to my device. But I made it over stock Android 4.3, I forgot to update to 4.4.2. So now id does not work/ I can only turn on Odin Mode.
But all Stock ROMs I tried to flash does not want to flash to my device. Installation stops at the beginning.After NAND Write! the error Complete (Write) operation FAILed! appears. I can do nothing. Please, help to solve that. How to flash stock ROM?
Flash the nb1 tar file in Odin. You can find it in the general forum
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar file in Odin. You can find it in the general forum
Click to expand...
Click to collapse
I already tried that, but result is the same.
I had version MJ6, but I cannot find it.
Paul-Maestro said:
I already tried that, but result is the same.
I had version MJ6, but I cannot find it.
Click to expand...
Click to collapse
So you have an i337m? Get the Odin file from sammobile.com
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
So you have an i337m? Get the Odin file from sammobile.com
Click to expand...
Click to collapse
No, I have i337 AT&T, but I have problems with flashing ROMs, and I do not know the reason.
I downloaded already 12 ROMs, but only one flashed good, but still without result. I can see onle screen with "Galaxy S4"
It seems to me tha this version is suitable for me http://forum.xda-developers.com/showpost.php?p=46804713&postcount=2 but is was deleted from filehost
Make sure you have kies and the correct odin version. Maybe use another computer or reinstall windows on your computer and start from the clean slate if desperate. I have experienced that. It happens when your computer has some problems.
Omega ROM isn't made for AT&T variant S4.
If you did not flash a kernel compatible for AT&T after you flash the rom then you will not be able to boot up into the system.
Go back to your custom recovery, and install a ROM that's specifically made for AT&T like Golden Eye and so on then it should boot up fine. Also make sure you do a wipe before you install the Rom.
Peeps.
I want to reflash my note 3 back to stock to sell it on but I am having problems.
I downloaded the stock rom from sammoblie , installed odin and followed all instructions and it always fails at installing installing the hidden part of the rom ( whatever that is ).
I have tried different USB ports and different USB cables as well as different UK stock ROMs and still not luck.
Can anyone advise.
Thanks
Sent from my XT1572 using Tapatalk
deejayburnout said:
Peeps.
I want to reflash my note 3 back to stock to sell it on but I am having problems.
I downloaded the stock rom from sammoblie , installed odin and followed all instructions and it always fails at installing installing the hidden part of the rom ( whatever that is ).
I have tried different USB ports and different USB cables as well as different UK stock ROMs and still not luck.
Can anyone advise.
Thanks
Sent from my XT1572 using Tapatalk
Click to expand...
Click to collapse
Download Phone INFO Samsung, and post screenshots.
Will do so tonight when i get home from work.
Sent from my XT1572 using Tapatalk
I am unable to install this app as my device will not load. As it has partially flashed the stock rom, I no longer have the ability to load anything.
Sent from my XT1572 using Tapatalk
Managed to get it to flash stock rom. Turns out that it was a bad download of the rom from sammoblie. Re downloaded the file and flashed and worked 1st time.
Sent from my XT1572 using Tapatalk