So I purchased a used note 3 ( N900A )
I just switch to straight talk. So I had a full size sim and cut it down to fit my note 3 . When I try to go into my apn setting it says insert a sim or something like that.
I know the sims registering , to the phone I can read stuff from it.
So has any one went down the road I am . Is my sim locked or something like that.
Also there is an app called "Sim App." it will first say icc-id and give what looks like about 15-16 numbers then click ok it reads imei check sum gives 4 digits next reads random number gives 8 numbers.
then asks for an unlock code . If entered wrong it will say you have X amount of trys lefts.
Does this have anything to do with why my sim card is not registering to the phone?
Do any sim card works in the phone? Does your sim card work in other phones? Was the phone tested with a sim card before purchase? Was the phone locked to AT&T?
audit13 said:
Do any sim card works in the phone? Does your sim card work in other phones? Was the phone tested with a sim card before purchase? Was the phone locked to AT&T?
Click to expand...
Click to collapse
Yes if I switch the card to the other phone . It works.
Im not sure if this matters the orginal phone was a throw away`alcatel. Its not a smart phone.
Are you using the SIM card in another phone that also uses a micro sim? Does the note 3 recognize any SIM cards?
audit13 said:
Are you using the SIM card in another phone that also uses a micro sim? Does the note 3 recognize any SIM cards?
Click to expand...
Click to collapse
I only have this one sim .
The note is reading the sim card with certain aps . You know how if you up power up a phone , missing a sim it will say so if you pull down the top banner usually with a message like insert sim. When you pull down the top banner it doesn't say that . There is no warning about missing a sim . So it recognizes it has one . I can read stuff off the sim card when i open certain aps that are meant to access sim cards but when I go to change APN setting it will say insert sim card to access network settings.
Without another sim card to try in the phone, it could be the way the sim card was cut or there is something wrong with the phone.
Is the phone sim unlocked? Did you try a sim card in the phone before buying it?
audit13 said:
Without another sim card to try in the phone, it could be the way the sim card was cut or there is something wrong with the phone.
Is the phone sim unlocked? Did you try a sim card in the phone before buying it?
Click to expand...
Click to collapse
I dont think the phones sim is unlocked.
No I didnt try a sim . It was from a family member so Im not to worried. The sim card works in my throw away straight talk phone.
How do you unlock the phones sim?
BTW thank you for your help.
In order to determine if the phone is sim unlocked, power off the phone, insert a sim from another carrier, and power up the phone. If phone asks for a network unlock code, the phone is not sim unlocked and you will need to get an unlock code.
Was the Note 3 n900a from AT&T?
Related
i just recived my unlock code from tmobile and i want to test the code and see if it unlocks my phone.
where can i get a foriegn sim card?
is there a website? or can i unlock it without a foreign sim card?
again, i have my code
also, lets say, i am in germany.........
and i get a sim card from over there.........can people still call my US number? or will that change?
is this legit?
http://www.oneroam.com
you dont need a foriegn sim card,
all you need is an "unsupported" sim card... any non Tmobile sim would work
once you have it in the phone and power on you will get a message like
"Please input unlock code"
punch in the code, then it will "find" the network the sim is attached to... so if you use an at&t sim card it will register to the att network in about 30 secs
.....
so mainly is
1. use an unsupported sim card
2. enter unlock code
3. verify it connects to the unsupported network (at&t since those sim;s are easy to get)
4. put your normal simcard back
schizox said:
you dont need a foriegn sim card,
all you need is an "unsupported" sim card... any non Tmobile sim would work
once you have it in the phone and power on you will get a message like
"Please input unlock code"
punch in the code, then it will "find" the network the sim is attached to... so if you use an at&t sim card it will register to the att network in about 30 secs
.....
so mainly is
1. use an unsupported sim card
2. enter unlock code
3. verify it connects to the unsupported network (at&t since those sim;s are easy to get)
4. put your normal simcard back
Click to expand...
Click to collapse
got ya, thank you for your fast reply, i thought i could do it that way, but just wanted to be sure.
"
also, lets say, i am in germany.........
and i get a sim card from over there.........can people still call my US number? or will that change?"
the number is tied to the sim
if you put in a sim card from another operator you get a new number
and people can't call the number of your old sim
even if you get a dual-Sim holder and have 2 sim in the device granted it support it
most places the rules apply that if other people call your USA number
while you're outside
they only pay for calling you in USA
and you pay for directing the call from USA to what ever country
you're presently in
if this is fine by you you don't even need to unlock it as tmobile would have
roaming agreement in many countries in the world but at a high cost of cause
Good Day,
I got an unlock code from mobileincanada.com but I don't have another carrier sim card to force it to ask me to sim unlock the phone.
Is there anyway to enter the sim unlock code on the X10 with putting a different sim card in?
Thanks
why not use one of your friends sim card?
Where are you located? You can easily go to a phone shop and they will lend you a sim so you can do your unlock.
Ok, so i was explaining to my lil sister about sim cards, and as i was saying how only Verizon worldphones had sims, i realized that you could, in theory, put a Verizon 4g sim into a 3g worldphone, and.... what would it do? I'm a little hazy on how exactly Sim cards work, but would it be possible to artificially "create" a 4g phone using a 4g Verizon sim?
EDIT: ok, since there are no answers, i realize this is a noobish question, but does the sim card contain the actual 3g/4g/whatever radios, or does it just "enable" them?
The sim card contains the customer account information, so once you lock the signal verizon knows how to properly bill you for your usage.
4G sim cards are different than 3G sim cards although they are in the same format. You can't just swap your Droid 2 Global Sim card and expect to work in your Droid 3 or vice versa becuase the ESN is what is tied to your number, the sim card is just there for roaming purposes (i may be wrong on that one), but i know that even on the global phones, you must have the sim card inserted in the phone to be able to get service with verizon.
The 4G sim card works more like a REAL (GSM) simcard you can swap your sim card into another 4G device and your number will transfer.
Here is another difference, the same sim card on global devices can be reused like you can go to your account and transfer your phone to another account without the need for another sim card. The 4G sim cards become invalid once they are deactivated and you will require a new blank sim card in case you want to activate your phone number again (this usually happens when you switch from a 4G device to a 3G, then move back up to a 4G device), they work much like most GSM sim cards work.
So in sumary, the 4G sim cards works more like a real sim card.
I have N4 from T-Mobile, but I decided to give it to my mother. Since she had standard SIM, we went to her provider and they cut it into micro SIM. But when I insert this new micro SIM card into phone, it isn't recognized. It shows there is no SIM card at all. My card works. Is this a know problem? How can it be fixed?
Terepin said:
I have N4 from T-Mobile, but I decided to give it to my mother. Since she had standard SIM, we went to her provider and they cut it into micro SIM. But when I insert this new micro SIM card into phone, it isn't recognized. It shows there is no SIM card at all. My card works. Is this a know problem? How can it be fixed?
Click to expand...
Click to collapse
Cutting isn't perfect, especially with older SIMs... It is entirely possible to render the SIM unusable by cutting it, granted it usually works, especially with newer SIMs, but not always. Verify the contacts match up by comparing to your SIM and if it does then the most likely cause is the cutting ruined the SIM and you will need to contact her provider for a new SIM. There is no known issue with using a cut SIM other than this.
Terepin said:
I have N4 from T-Mobile, but I decided to give it to my mother. Since she had standard SIM, we went to her provider and they cut it into micro SIM. But when I insert this new micro SIM card into phone, it isn't recognized. It shows there is no SIM card at all. My card works. Is this a know problem? How can it be fixed?
Click to expand...
Click to collapse
The Nexus 4 doesn't like cut sims. Although they can work, many users have issues.
Hi there,
So, My dad just bought this beast. first impression is really amazing. So, To get started, I cutted down my sim card into micro-sim and Inserted it in yureka. after booting, It shows no sim card. When I search for networks and Click on any network for registration, It says "Your sim card does not support on this connection" something like that. I have checked the sim and it is working in other smartphones.
Just in case, I have cm11 in it. Not updated yet. any help would be appreciated. Sorry, If i posted in wrong section
EDIT: CHECK THE ATTACHMENT. Sim slot looks different as compared to others. I am from india.
Test the sim to both slots and see if one of them working. And if no slot works out, then try other micro sim to test sim working. If that too not working,means slot are not functioning. Need hardware replacement or whatever you can get.
Well, I already tried in both of them. Not sure about other micro sims.