Ok guys. Got my nvidea sheild tv box today. 16gb model. Am trying to root, but laptop doesn't seem to connect via usb at all. No usb noise like anything else I connect. Perhaps something to do with drivers I installed when I had my Amazon fire tv box? Any help? I've enabled developer and usb debug. Am I missing something obvious?
Edit - sorted out now.
Followed a really good video guide!
Related
Hi all, fortunately I have my motorola Atrix but I have a problem when playing videos by hdmi to TV, connect the phone and it started the implementation of video on TV but nothing comes out, it is as if not detected, know if I have to do something special on the phone to work this out??
Thanks and regards
Do you select the webtop or media setting once you plug it in? If so, and you aren't getting anything, then your unit might be defective.
Sent from my Nexus One using XDA Premium App
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
josete_chaco said:
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
Click to expand...
Click to collapse
When you plug in the HDMI cable, a pop-up should appear on the phone asking to start the HD Entertainment Center. That's the only way to get video-out onto the TV. If this isn't popping up and you haven't done anything to modify your phone software, then your device my have a problem.
ok thanks for the help, the only modification I've done is to make the root software, nothing else has that something to do?
I have only tested on a old TV, I'll try another to see if that is the problem, my TV is the first that came with hdmi at best can that be right?
Greetings
My Atrix had something wrong with it's HDMI, I had to return it and get a new one. When I plugged it in to a TV the phone would act properly (the pop-up menu would appear, and the controls would be present when the media center was selected) but I wouldn't see anything but snow on my TV. I also tried a HDMI computer monitor to the same effect. I lastly went to the ATT store and tried a dock, same problem.
Interesting to know that it was more than just mine.
Oh, mine was stock, not rooted yet.
-Tom
Hi all, ultimately the problem is not the phone, I tested a friend's TV and it works perfectly, when you connect me jump hd window center and all good, so I have a problem with my TV.
If someone happens just as well try it on another TV in case.
Thanks for the tips and greetings.
Does anyone know if there is any type of compatability with controllers of any sort or any gamepads with the mini-usb port on the Kindle Fire? I know this is mainly meant for syncing with a pc, but wondering if this is at all possible or not. Am aware that bluetooth is not available at this time, hoping for an update to bluetooth in the future without actually disassembling the Fire, but oh well. I'm wanting to use some type of keyboard or controller/gamepad so that I can play Onlive, and also perhaps for a few emulators that I have also.
jtb224 said:
Does anyone know if there is any type of compatability with controllers of any sort or any gamepads with the mini-usb port on the Kindle Fire? I know this is mainly meant for syncing with a pc, but wondering if this is at all possible or not. Am aware that bluetooth is not available at this time, hoping for an update to bluetooth in the future without actually disassembling the Fire, but oh well. I'm wanting to use some type of keyboard or controller/gamepad so that I can play Onlive, and also perhaps for a few emulators that I have also.
Click to expand...
Click to collapse
I would be suprised if it had the usb drivers necessary to do this.
What do you mean by BT. Have they confirmed that BT is in the fire?
The Kindle Fire does have bluetooth capability in it, so far as I am aware. But, the original KF kernel does not support it, and Amazon hasn't made any announcements as to the support of it in the future. And you mentioned something about the drivers, is there a way to push a usb driver update through the Fire through ADB, as mine is rooted still? I read through another thread earlier about disassemblying and reverse engineering the bluetooth capabilities, I'm just simply trying to figure out if possible to use the mini usb cable to hook up to a simple gamepad. Though the usb driver does throw a wrench in the process.
Hey all, I just got an A500, rooted it, flashed bootloader, recovery, custom ROM, all is good. One issue, I did not see anything on point in the Q&A section on this. I have a standard HDMI cable hooked between my laptop and second monitor. I did get a micro HDMI adapter. I pulled the cable from the laptop and plugged it into the tablet. Black screen on the monitor, although the orientation on the tablet does switch. When I pull the cable out of the tablet I do get a "check signal cable" message across the monitor, so it does seem to be "connecting". I've searched every setting on the tablet, there doesn't seem to be anything else I need to do on it. Am I missing something? The monitor is a Samsung SyncMaster 940BW, fwiw. Any guidance would be appreciated.
wbexpress said:
Hey all, I just got an A500, rooted it, flashed bootloader, recovery, custom ROM, all is good. One issue, I did not see anything on point in the Q&A section on this. I have a standard HDMI cable hooked between my laptop and second monitor. I did get a micro HDMI adapter. I pulled the cable from the laptop and plugged it into the tablet. Black screen on the monitor, although the orientation on the tablet does switch. When I pull the cable out of the tablet I do get a "check signal cable" message across the monitor, so it does seem to be "connecting". I've searched every setting on the tablet, there doesn't seem to be anything else I need to do on it. Am I missing something? The monitor is a Samsung SyncMaster 940BW, fwiw. Any guidance would be appreciated.
Click to expand...
Click to collapse
Which ROM are you using for your tablet? ICS or JB? I have a Sony Bravia and when using ICS ROM, everything worked fine. But for the JB, only video but no sounds on the TV, only sound from tablet. It's a known issue for JB ROM. Is this the first time that you use the HDMI from tablet to TV? If yes, I suggest you check the TV's manual for set up option for HDMI. For my Sony TV, I had to use the remote control to select the input option every time I connect the tablet to TV.
taodan said:
Which ROM are you using for your tablet? ICS or JB? I have a Sony Bravia and when using ICS ROM, everything worked fine. But for the JB, only video but no sounds on the TV, only sound from tablet. It's a known issue for JB ROM. Is this the first time that you use the HDMI from tablet to TV? If yes, I suggest you check the TV's manual for set up option for HDMI. For my Sony TV, I had to use the remote control to select the input option every time I connect the tablet to TV.
Click to expand...
Click to collapse
PJ Sports 10/27, yes, JB. Sorry, I did not make it clear that I am trying to plug it into my 2nd monitor, not a TV. So, effectively it's a direct path from the tablet to the monitor. Does that help to clarify?
Oh my i've just done a stupid thing.
I try to install shield tv controller driver on my PC. But i selected the wrong driver.
Now it shows the controller as unknown device when connect and even shield tv don't recognize it.
If anyone knows how to solve this, please help me :crying::crying:.
P/s the charging light is still showing.
The controller shouldn't get bricked unless you somehow managed to install the wrong firmware. Have you tried diagnostic apps like USB Device Info?
LokiJr_ said:
Oh my i've just done a stupid thing.
I try to install shield tv controller driver on my PC. But i selected the wrong driver.
Now it shows the controller as unknown device when connect and even shield tv don't recognize it.
If anyone knows how to solve this, please help me :crying::crying:.
P/s the charging light is still showing.
Click to expand...
Click to collapse
You can use micro usb connect controller with shield tv. and check the connection
Hi, I am new to using a Firestick. I was fortunate to have a friend that gave me one. I know my Firestick is rooted to get what it needs. I am assuming that rooted means Jailbroke. If I am wrong please let me know. I am having a problem with my Firestick in the form of this, I bought an Amazon Ethernet Adapter for Amazon Fire TV Devices. When I try to connect to the Firestick I cannot get it to work. I see the Firestick on my router’s information page, however, I cannot get it to use the ethernet connection. I am sure the unit is working without the Ethernet Adapter because I saw it work on Wi-Fi. I searched for some information and I found this article. It makes me think, is there something else that needs to be done to the unit before it will work? Any help or advice appreciated. Thanks