Related
Compiled from FCC information and Wikipedia for two of the Moto E LTE models:
FCC ID IHDT56QC8 (XT1528) -
This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, and 13, with channels up to 20 MHz in bandwidth.
FCC ID IHDT56QC7 (XT1527) -
This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, 12, 17, 25, 26, and 41, with channels up to 20 MHz in bandwidth.
From Wikipedia:
2 = 1900Mhz (PCS)
4 = 1700Mhz (AWS)
5 = 850 (Cellular?)
12 = 700 a
13 = 700 c
17 = 700 b
25 = 1900 g
26 = 850 (SMR?)
41 = 2500 (old WiMax)
So, the Verizon model (1528) will technically support LTE on AT&T and T-Mobile bands 2 & 4. It has all three Verizon LTE bands (obviously) - 2, 4, 13. You would be missing LTE on AT&T band 17 and LTE on T-Mobile band 12.
The other model (1527) will support LTE on AT&T in 2, 4, and 17. Will support Sprint on 2, 25, 26, and 41. Will support T-Mobile on 2, 4, and 12. Technically it might also support Verizon on 2 and 4. (Verizon is currently using 4 as part of XLTE in certain markets, and I don't know if think are running LTE on 2 at all. )
It appears that the 1527 model is the better one to get for band coverage, unless you want Verizon LTE on band 13.
Found a third model. From FCC docs:
FCC ID: IHDT56QC1.
This mobile device is also equipped with an LTE transceiver. This LTE transceiver supports high-speed wireless data communications within LTE Bands 2, 4, 5, 7, 12, and 17, with channels up to 20 MHz in bandwidth.
This particular variant will work on LTE on AT&T in bands 2, 4, and 17. It will work on LTE on T-Mobile in 2, 4, and 12. It will work on Verizon's LTE on 2 and 4, but is missing Verizon's core band 13 (700c). Not sure which provider is using it with on band 5 (850). This model apparently (compared to QC7) is missing the Sprint LTE bands completely (25, 26, 41).
acadiel said:
Not sure which provider is using it with on band 5 (850).
Click to expand...
Click to collapse
AT&T uses LTE band 5 in certain rural areas
Does the Verizon XT1528 support GSM bands?
All postpaid Verizon 4g lte have UNLOCKED GSM bind if I am correct. Has Verizon been able to block GSM bands in the Moto E 2015?
I have been trying to figure this for last couple of days.
Thanks
Yes Verizon Moto e 2015 Comes international unlock for GSM/CDMA Sim.
samratunlock said:
Yes Verizon Moto e 2015 Comes international unlock for GSM/CDMA Sim.
Click to expand...
Click to collapse
the Verizon Moto E 2015, sadly ISN'T internationally unlocked, i currently have two and they won't connect to my GSM netwrok . I'd assume this is also the case for domestic USA networks
i also having verizon model
works with indian gsm carrier.
wow!!! this is the break-through i've been waiting for, how did you get the device to work on a gsm carrier?
interkaiser said:
wow!!! this is the break-through i've been waiting for, how did you get the device to work on a gsm carrier?
Click to expand...
Click to collapse
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
samratunlock said:
i also having verizon model
works with indian gsm carrier.
Click to expand...
Click to collapse
This intrigues me as well. Airtel, the most popular carrier in India, runs GSM 1800,900 UMTS 2100 LTE 40 (2300). The VZW Moto E according to the RF Exposure Report on the FCC for IHDT56QC8 says that the Moto E only supports CDMA 1900,850 GSM 1900,850 UMTS 1900,1700,850 LTE 2 (1900), 4 (1700), 5 (850), 13 (750). That would mean that there is no way that a VZW Moto E would run on Airtel. Does the phone support more bands than are listed in the FCC filing or did you do something else like flash a different baseband?
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
It worked!!!!!!!!!!!!!! thank you so much
Click to expand...
Click to collapse
XT1528
interkaiser said:
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
It worked!!!!!!!!!!!!!! thank you so much
Click to expand...
Click to collapse
Hi guys. Help. I am in Ukraine, I bought XT1528 put "4G Switcher" GSM but I have not earned. What will advise?
Click to expand...
Click to collapse
LTE/CDMA to GSM/WCDMA Sim card
Thanks for the advice, It worked with app "4G LTE Switch", BUT the sim card is still not recognizable, I mean it says Sim card is not from Verizon. Luckily the phone and the SIM card are working now. Thanks again my friend
JasonPro11 said:
I got the VZW Moto E working on a AT&T GoPhone SIM. The phone complains that it isn’t a VZW sim and there isn’t an option to switch to GSM is the settings menu. Though you can definitely adjust that setting elsewhere (no rooting involved). Just install this app "4G LTE Switch" . All the app does is spawn an activity that is actually in the Android Settings app that normally is only accessible by a special code in the dialer. Motorola has removed that special code, so you have to get at it this way. This app is hardly the only one to do the same thing. You could do the same thing from APEX launcher by selecting the right activity to spawn in the Android Settings app.
Once you’re into the Phone Info menu, just scroll down to “Set preferred network type” and choose LTE/GSM. Once I did that, the phone connected to AT&T LTE. I was able to place a call as well. I also saw it drop to H+, so I know UMTS was working as well. If you reboot the phone though, it will revert to “LTE/CDMA” mode and you will again have to change it back to “LTE/GSM”.
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
---------- Post added at 06:46 AM ---------- Previous post was at 06:20 AM ----------
This intrigues me as well. Airtel, the most popular carrier in India, runs GSM 1800,900 UMTS 2100 LTE 40 (2300). The VZW Moto E according to the RF Exposure Report on the FCC for IHDT56QC8 says that the Moto E only supports CDMA 1900,850 GSM 1900,850 UMTS 1900,1700,850 LTE 2 (1900), 4 (1700), 5 (850), 13 (750). That would mean that there is no way that a VZW Moto E would run on Airtel. Does the phone support more bands than are listed in the FCC filing or did you do something else like flash a different baseband?
Click to expand...
Click to collapse
Will the boost variant work on net10 byop at&t towers
Sent from my N800 using XDA Free mobile app
If I unlock this phone,
Will calls and Sms work fine over 3G/2G networks?
For example: Tmobile or AT&T.
JasonPro11 said:
A STRONG WORD OF CAUTION... There is a menu in the upper right hand corner of the phone info screen. In that menu is an option to "Set Radio Band". In there, you will be presented with two options. Choosing either option will limit the bands your phone will use at a given time. It will not open up more bands for you to use. By default, your phone's baseband (the processor that controls the radio) will select bands automatically without restrictions. Once you make a selection from this menu, YOU CAN NEVER GO BACK TO AUTOMATIC MODE. (Never say never... you can just reflash the baseband to reset it... but you don't want to have to do this) A factory reset doesn't fix this because this setting is made in the phone's baseband and not within Android OS. Bottom line, don't get curious and use the "Set Radio Band" option. I made this mistake with a Moto X and was finally able to fix it by reflashing the baseband.
Click to expand...
Click to collapse
Appreciate the warning, but there is a simple workaround I just accidentally did this and the radio was disabled, but if you set 'LTE/GSM' in the app, and then go into normal 'settings -> Wireless & Networks -> More -> Cellular networks -> Network Operators -> Choose Automatically' will bring back auto selection.
reliance cdma dat working
samratunlock said:
i also having verizon model
works with indian gsm carrier.[/QU
Sir, Let me confirm that Moto E2 verizon model works on indian CDMA like Reliance with EVDO data
and Wifi . Please enlight me with clear details on Reliance CDMA data.[/SIZE]
Click to expand...
Click to collapse
SURESH1770 said:
samratunlock said:
i also having verizon model
works with indian gsm carrier.[/QU
Sir, Let me confirm that Moto E2 verizon model works on indian CDMA like Reliance with EVDO data
and Wifi . Please enlight me with clear details on Reliance CDMA data.[/SIZE]
Click to expand...
Click to collapse
One silly question Reliace cdma with 3g data.. where is it available?
Is it there in Andhra Pradesh or Tamil nadu or karnataka?
Click to expand...
Click to collapse
Harish_Kumar said:
SURESH1770 said:
One silly question Reliace cdma with 3g data.. where is it available?
Is it there in Andhra Pradesh or Tamil nadu or karnataka?
Click to expand...
Click to collapse
RELIANCE CDMA EVDO DATA available in Tamilnadu. not 3g..
pls let me confirm work wifi hotspot with data
Click to expand...
Click to collapse
I was wondering if you were able to find a solution for the settings to stick after each reboot??
Thanks in advance
unlocking my bootloader please help
heres the strain of numbers if gave me or can someone email me i need help with unlocking my bootloader and rooting
9900054517528400#5441313034304258365900585431353238000000#9D541D95274C5C9106ACBCBB74377E3150881F95#924C6908000000000000000000000000
Dial *#*#4636#*#* on the dial pad, on the top right menu select the option to Select band on the next screen, select Band 6. I am constantly locked on Band 4, after making this change and my internet speeds has jumped significantly.
Please be advised, that you need reboot your phone and it might take about 15 minutes to sync your new settings to VZW servers after you make this change.
Let me know, if this helped anyone else.
I tried this and idk if it helped lol
I know Band 4 is XLTE, but what's Band 6?
Sent from my Nexus 6P using Tapatalk
In the selection band, you dont have Band 4. You need to select Band 6 from the list.
How do you see what band you're currently on?
Use LTE Discovery app.
It says it changed to band 6 but LTE discovery shows band 4 even after a reboot
It is supposed to Show Band 4 on LTE Discovery. That is good. Now do a speed test and see improvements.
no improvement here. same ping and upload speed. dropped 6Mbps on download speed.
how to i change back since there's no option for band 4 in the settings?
If you selected Band 6 in that Menu, that should connect u to Band 4 or Band 13 on Verizon. Open LTE discovery app and see which band you are connected on now.
But if you want to revert back to your previous settings.. You can do a network reset from the backup & menu option under settings.
I don't have any issues with VoLTE or speeds on Verizon.
This worked, very good! I was experiencing slow speeds, especially upload speeds and this fixed it!
First want to put it out there that you do this at your own risk
I love that T-mobile has Band 12 LTE coverage but for me the data speeds on Band 12 are horrifically slow, so I prefer my phone to be on Band 4 LTE (at least while at work).
I used to do this change all the time on my S6/Edge and the steps are vary similar to do them on the S7(slightly more involved).
To start with, if you mess with bands, it can(and probably will) affect some sort of your service
So to change network bands you have to enter the service menu. To do this, go to the phone dialer and enter
*#2263#
Once here you will see a screen saying ServiceMode followed by various options
To turn off Band 12 choose LTE Band Preference (#4 on the list).
Then hit next page until you see Band 12 and deselect it (this will remove the * from next to it).
Once that is done, in the top right you'll see where it says "More" select this and choose "Back" - do this until you get back to the main page
Now back at the "Main Menu" choose "Apply Band Configuration" (option 7) and you're done.
Once you exit the menu(by hitting either home or the back phone key) you'll lose signal for a second while the phone switches the bands around.
To revert back to normal, enter service menue *#2263#, choose "Select All Bands"(Option6) and then Choose "Apply Band Configuration" and you're back to normal
Hope this helps someone
EDITed the info above so that you can turn off just Band 12 and keep calling features
Updated the instructions, figured out how to make the phone stick to Band 4 and still retain ability to make/receive calls
Oh Ya band 12 is terribly slow. At least when compared to band 4. Band 4 is wideband at 20x20 20mhz bandwidth while band 12 is 5mhz bandwidth. It's just barely enough.
I was wondering why my speeds suck since I've upgraded to a new phone guessing this is why
Do you have any approximations of the speed difference between the bands, like with speedtest or something?
I didn't notice any difference in speed with my tests was really hoping for better. I'm only getting about 15-20mbps now I was getting between 60-80 about 3 months ago
Ishmael89 said:
Do you have any approximations of the speed difference between the bands, like with speedtest or something?
Click to expand...
Click to collapse
I'll get some later tonight - something is going on with LTE around my work and Band 4 and Band 12 are both acting up
I cant access *#2263# menu on my galaxy s7 edge exynos version
My phone can't connect to my current carrier LTE band. I have done some research and my carrier LTE Band is 17. The problem is that when I try to find how to enable it, it only appears solutions for previous models such as M9 or M8. Is there a way to enable LTE band 17 in this phone? (Also, my knowledge in this matter is low, but I my phone is rooted)
Look here
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
I have a Nokia X6. I put two SIMs into it, both show 4G.
I have some problem to connect data or mobile internet. Grammen phone provider.
I was ready to purchase one, however, was curious if this would work on t-mobile. If so, would the Wi-Fi calling work?
Did you already checked if your 4g network band compatible with your phone?
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
Android One TA-1099 or TA-1103?
For TA-1099
Network 900MHz, 1800MHz, 850MHz, 1900MHz, 800MHz, 2GHz, Band 38, Band 39, Band 40, Band 41 (2555-2575 MHZ, 2575-2635 MHZ, 2635-2655 MHZ), Band 1, Band 3, 1.9GHz, I , II, V, VIII
Data Service LTE Cat. 4, 150Mbps DL/50Mbps UL
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
brunonemer said:
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
Click to expand...
Click to collapse
TA-1103 LTE Band 1, 3, 5, 7, 8, 28, 34, 38, 39, 40, 41
https://imgur.com/a/SqSj1Tg
https://imgur.com/a/oDBAiOe
https://imgur.com/a/QAnFBVG
https://imgur.com/a/glcUhMc
https://imgur.com/a/SXYMKfM
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
So, have you solved your problem?
If the ROM of your phone is "CN" you could try to flash the phone to the global ROM 2_29(WW) or wait for a new update of the firmware. You haven't noticed the firmware's version. Have the phone got any updates?
I just returned the phone and got an LG G7 instead. The X6 that I was using also had a problem with Bluetooth as I was never able to turn it on.
Manually switch the preferred network type.
I am using the latest Stock Android version on Nokia 8 and struggled with this issue too. I tried everything I could possibly do.
The simplest answer is to go into network settings and select 2G, give it a minute to find it. Do it for 3G too. Give it a minute to find it. Then 4G, same thing. Finally select 4G as preferred network type and that should do it.
It looks like the default preferred network type is 3G from the factory.
guys i cant even access my mobile data connection can anyone tell how access it
thanks
By salah