I need to know if someone of you already enter or found out how to change the Qualcomm settings in XT1575
i already did everything to turn on my radio but nothing works.
Turn on your radio?
Yep, my phone shows in service state, voice: radio off data: radio off.
lafester said:
Turn on your radio?
Click to expand...
Click to collapse
Voice and data: radio off
Call your provider
lafester said:
Call your provider
Click to expand...
Click to collapse
and if already try 4 different simcard ?
Could this be IMEI fault?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cpagallardo said:
and if already try 4 different simcard ?
Could this be IMEI fault?
Click to expand...
Click to collapse
Restore your efs backup
Google~Android said:
Restore your efs backup
Click to expand...
Click to collapse
you know... i have a little problem with that... i have no backup.
I bought it, with a local dealer who bought it on ebay, i ask my money back but...
Google~Android said:
Restore your efs backup
Click to expand...
Click to collapse
did i still need to restore my EFS Backup?
this is what *#06# shows:
Looks like it's ok, no null or 00000
Good IMEI so... what´s going on?
The OP needs to clearer about their query.
From a fully off state perform the following.
1) Press and hold power + vol down
2) continue holding until you're at the bootloader menu
3) vol down to bp tools
4) power to select
5) you'll have to manually configure the drivers, but it should be obvious which entry is what in device mgr
You now have a diag port and can use a software like cdma workshop to change settings.
Note, if you don't know what you're doing here, stay out. It's possible to put the phone in a state where you'll have no mobile connectivity.
gpz1100 said:
The OP needs to clearer about their query.
From a fully off state perform the following.
1) Press and hold power + vol down
2) continue holding until you're at the bootloader menu
3) vol down to bp tools
4) power to select
5) you'll have to manually configure the drivers, but it should be obvious which entry is what in device mgr
You now have a diag port and can use a software like cdma workshop to change settings.
Note, if you don't know what you're doing here, stay out. It's possible to put the phone in a state where you'll have no mobile connectivity.
Click to expand...
Click to collapse
I´m going to try it... what else can i do whit this brick anyway... Thanks!
You have a working/activated sim inside? Sim is tied to an active account?
Has the radio ever worked correctly? What was done just before it stopped working?
gpz1100 said:
You have a working/activated sim inside? Sim is tied to an active account?
Has the radio ever worked correctly? What was done just before it stopped working?
Click to expand...
Click to collapse
Q#1: yes it´s an activated sim card installed and not tied to an active account.
Q#2: The guy i purchased told me that radio just stop working after MM update.
Right now im doing a NV items backup.
Already try to launch from Terminal:
su
am start com.motorola.android.settings.modemdebug
Root/System/app
HiddenMenuLigh.apk
but nothing works.
I'd reflash the entire system firmware, factory reset, then try again. If still no go, then get with your seller about a refund as something is damaged and/or corrupted.
gpz1100 said:
I'd reflash the entire system firmware, factory reset, then try again. If still no go, then get with your seller about a refund as something is damaged and/or corrupted.
Click to expand...
Click to collapse
Already did, Full wipe via TWRP, then full restore via Fastboot.
my seller already told me no refunds when i ask a my money back.
well thanks anyway.
cpagallardo said:
Already did, Full wipe via TWRP, then full restore via Fastboot.
my seller already told me no refunds when i ask a my money back.
well thanks anyway.
Click to expand...
Click to collapse
Paid with paypal right? Do a dispute.
gpz1100 said:
Paid with paypal right? Do a dispute.
Click to expand...
Click to collapse
In fact i purchased it to a local seller, so i have no way to contact the seller to ask for refund, its a seller in facebook.
So... i have to put some more attention next time i purchase a cellphone.
gpz1100 said:
Paid with paypal right? Do a dispute.
Click to expand...
Click to collapse
What if i restore an EFS Backup from another XT1575??
Do you think that could help?
Related
Download and Install LG United Mobile Driver
Download and Install LG Mobile Support Tool
Boot your phone into download mode:
Put your G2 into download mode by switching it off, hold the Volume up button and insert the usb cable into the phone; wait for the drivers to finish loading if doing it for the first time.
Start the LG Mobile Support Tool and click on Options -> Upgrade Recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It should now download the firmware (about 2gb) and flash it - this may take some time.
This is needed if you stuck in a bootloop after the flash is done:
Factory reset (this wipe your data and sdcard):
1. Turn the phone off.
2. Press and hold the Power and Volume down button.
3. When the LG logo pops up let go for a second and press the combo again.
4. You'll be prompted to press the Power button 3 times to wipe the device.
I would hate to have to use this, but wow what a good find. Thanks for contributing.
Sent from my LG-D800 using Tapatalk 4
Just got my g2. About to root install twrp etc. This is exactly what I was looking for. Thanks for posting.
Sent from my LG-D801 using XDA Premium 4 mobile app
For anyone putting in dashes with the imei number, dont it wont work with em.
Just wanted to notify that this method made my 32gb D802 a 16 gb one!
karstensson said:
Just wanted to notify that this method made my 32gb D802 a 16 gb one!
Click to expand...
Click to collapse
I used this method last night and it didnt mess with the storage at all. They don't even have a 16gb G2 so who knows. Also are you sure you are not mistaken cause this method doesnt wipe data.
x714x said:
I used this method last night and it didnt mess with the storage at all. They don't even have a 16gb G2 so who knows. Also are you sure you are not mistaken cause this method doesnt wipe data.
Click to expand...
Click to collapse
I know it does'nt wipe data, but it reflashes recovery, and in my case something went wrong. But Lg DO sell D802 as a 16 gb model!
Can anyone using this method please post results. Just wondering if there is more success with this method as opposed to the other method. Thanks.
Saved my bacon today!
karstensson said:
Just wanted to notify that this method made my 32gb D802 a 16 gb one!
Click to expand...
Click to collapse
I don't understand how could this be, you downloaded the specific firmware for your device (using your serial number)...
Can't you just try to flash it again ?
Noam23 said:
I don't understand how could this be, you downloaded the specific firmware for your device (using your serial number)...
Can't you just try to flash it again ?
Click to expand...
Click to collapse
I have reflashed it 5 times The problem was that it asked for some kind of password the first time (not the pin). So I did a factory reset. Now even TWRP says that my storage is 10.66 gb :/
karstensson said:
I have reflashed it 5 times The problem was that it asked for some kind of password the first time (not the pin). So I did a factory reset. Now even TWRP says that my storage is 10.66 gb :/
Click to expand...
Click to collapse
Which password exactly ? when ? in the process of flashing ? the OP mentions no stage in which you need to give password...
What are you going to do now ? your device is not rooted, so you can replace it under warranty, no ?
Noam23 said:
Which password exactly ? when ? in the process of flashing ? the OP mentions no stage in which you need to give password...
What are you going to do now ? your device is not rooted, so you can replace it under warranty, no ?
Click to expand...
Click to collapse
It did not say what the password was for, just asked for it. It came up after the phone had booted, but before i could see the lockscreen. I will wait a couple of weeks, to check if someone else gets the same problem, or if it is fixable. Otherwise i will hand it in on the warranty since there are not traces of root.
karstensson said:
It did not say what the password was for, just asked for it. It came up after the phone had booted, but before i could see the lockscreen. I will wait a couple of weeks, to check if someone else gets the same problem, or if it is fixable. Otherwise i will hand it in on the warranty since there are not traces of root.
Click to expand...
Click to collapse
Why should a password appear at that stage ???
If you went through all of the flash process successfully, booted successfully and only then did a factory reset (when you saw that password), I see no reason to blame the factory reset that you did. This is something to do with the flash process. Maybe this is kind of a punishment that LG unleash on those who use this process ? seriously, why on earth would anyone try to flash his LG2, if it wasn't to get rid of root ? I also don't understand how the password went away after you did hard-reset, since the device was "hard-reset" when you did that flash. You said that you re-flashed about 5 times, did that password appear after each of those 5 times ?
karstensson said:
Just wanted to notify that this method made my 32gb D802 a 16 gb one!
Click to expand...
Click to collapse
Same issue here.
I also got the question after I used the software to enter my encryptionkey. Wich I didnt have.
So I had to hardreset from the recoverymenu (volume down + pwr), then I suddenly had 10.77GB left instead of 26.77GB or something similar.
Annoys me pretty darn much at the time beeing!
I did use my IMEI, not my serialnumber and model. I'll try to use the serial and model this time around, and see if there are any differences at all in doing so.
And yes, it does say 32GB on the back. So we're not mistaken it for a 16GB-model
And it does say that the model is the 32GB when I check the hardware-info on the android itself.
Maybe this has something to do with me using the adbcommand for mounting storage incorrectly?
I thought however it would be reset when I used the LG Mobile Support Tool to hardreset everything though.
Will this work with the AT&T model D800?
Also does this remove all traces of root to the point where you get your warranty back?
what was the solution to this...
Does this work with the TMO versions?
The windows application keeps getting a Windows error and closing shortly after the process begins. Any tips?
I would prob stay away from this if i was anyone else....Because it must be messing people phones up and changing the storage capacity
How to fix "Not registered to Network" problem 19505
terminator1983 said:
How to fix "Not registered to Network" problem 19505
Click to expand...
Click to collapse
Make sure you are in a good signal area..
Go into settings/wireless&networks/more/mobile networks/network operators
... and scan, once it has found the available networks select the one you want then use your back button to close everything down. Hopefully this will do the trick.
SSThing said:
Make sure you are in a good signal area..
Go into settings/wireless&networks/more/mobile networks/network operators
... and scan, once it has found the available networks select the one you want then use your back button to close everything down. Hopefully this will do the trick.
Click to expand...
Click to collapse
I have tried everything like this i have even flashed modems and stock firmwares with odin but the problem is still there.Its not that i am not getting any signals i can call and send & receive text sometimes but most of the time its showing emergency call or not registered to network and problem is not with the sim i have used it with another phone and its working just fine.
terminator1983 said:
I have tried everything like this i have even flashed modems and stock firmwares with odin but the problem is still there.Its not that i am not getting any signals i can call and send & receive text sometimes but most of the time its showing emergency call or not registered to network and problem is not with the sim i have used it with another phone and its working just fine.
Click to expand...
Click to collapse
I'm with the same problem like you can see on this post
http://forum.xda-developers.com/showthread.php?t=2636759
But my model is i9500
I am thinking of trying re-partitioning with pit file via odin have u tried it on ur device ???
duard said:
I'm with the same problem like you can see on this post
http://forum.xda-developers.com/showthread.php?t=2636759
But my model is i9500
Click to expand...
Click to collapse
terminator1983 said:
I am thinking of trying re-partitioning with pit file via odin have u tried it on ur device ???
Click to expand...
Click to collapse
No, I not try repartition yet
duard said:
No, I not try repartition yet
Click to expand...
Click to collapse
I tried that too still stuck with the same problem "Not registered to Network".
duard said:
No, I not try repartition yet
Click to expand...
Click to collapse
One thing else that i have noticed in the stock recovery that its showing
Manual Mode
Applying Multi CSC ....
Are u seeing the same in stock recovery
terminator1983 said:
One thing else that i have noticed in the stock recovery that its showing
Manual Mode
Applying Multi CSC ....
Are u seeing the same in stock recovery
Click to expand...
Click to collapse
Where I can see that ?
Pressing *#12580*369#
I see this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
duard said:
Where I can see that ?
Pressing *#12580*369#
I see this
View attachment 2560859
Click to expand...
Click to collapse
i am seeing that in the stock recovery
power off the phone and Hold volume up,power and home key to enter to recovery mod.
IMEI Repair
terminator1983 said:
How to fix "Not registered to Network" problem 19505
Click to expand...
Click to collapse
try IMEI Repair even if you have your correct imei
eagleouss said:
try IMEI Repair even if you have your correct imei
Click to expand...
Click to collapse
How can i repair imei and yes once when i installed CM 11 on my phone imei,serial no and basband all became unknown than i flashed a stock firmware and they came back.
IMEI Repair
terminator1983 said:
How can i repair imei and yes once when i installed CM 11 on my phone imei,serial no and basband all became unknown than i flashed a stock firmware and they came back.
Click to expand...
Click to collapse
if you have your EFS file backup you can restore it, if you dont have it you must use z3x-box to restore imei to your phone or do a paid imei restore ( exemple : http://www.sammobile.com/unlock/)
eagleouss said:
if you have your EFS file backup you can restore it, if you dont have it you must use z3x-box to restore imei to your phone or do a paid imei restore ( exemple : http://www.sammobile.com/unlock/)
Click to expand...
Click to collapse
i have backup but its of when I got the imei and serial no after flashing the stock firmware don't have backup of earlier efs folder.
bump ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a Nexus 4 in front of me with a diagonal crack from top left to bottom right corners of the screen.
The touch screen only responds on the upper half of the phone.
I have been tasked with getting the images, videos, music etc. from this phone, however as I am unable to unlock the phone I am finding it pretty difficult!
Is there any way to get the data from the phone using either software or hardware hacks?
I know there are a lot of very knowledgeable people on this forum, any information is appreciated, even if I have to open up the phone and start cutting wires!
Thank you,
- Pano
Yes there is quite a single way to do it using ADB on your computer. Do you have that set up?
Sent from my Nexus 4 using XDA Free mobile app
fredcorp6 said:
using ADB
Click to expand...
Click to collapse
I've not got that set up no, are you talking about This?
OK I installed ADB and Fastboot.
I downloaded the custom Nexus 4 recovery from Clockwork Mod.
Booted the phone into Fastboot mode
Found the phone with ADB, tried to run the recover image... the phones LOCK STATE is LOCKED
How do I get past this!?
- Pano
EDIT:
It seems your bootloader is locked. NRT will unlock it but it will wipe your data. And a locked bootloader won't allow ADB (correct me if i'm wrong)
Try doing a factory reset through Recovery, it should get rid of the lock screen and allow you to transfer stuff through USB. I never tried to so i'm not sure will it work
Mashed_Potatoes said:
Try doing a factory reset through Recovery
Click to expand...
Click to collapse
Sure this won't wipe any data :fingers-crossed:
I'll have a look into it, thanks
- Pano
Panomosh said:
Sure this won't wipe any data :fingers-crossed:
I'll have a look into it, thanks
- Pano
Click to expand...
Click to collapse
##
Hi.
Is the device still under guarantee?
If not, you maybe can open the device and get the storage out of it, if there's no other way. First try it with this program, if you give up and there's no other way, (sorry to say this) you must do that.
Or try this:
Connect your phone to the charger
Reboot it
And start in safe mode (somehow, if you're able to do.)
...or replace the screen!
I'm so sorry for you, that something like that happened.
I hope you to manage to rescue your data somehow.
I also know the bitter feeling of data loss ;(
I hope this helped.
OK just to keep all updated and in case anyone ever uses this post in the future to help them...
I have tried everything, nothing worked as it either involved use of the touch screen at some point, or required me to have previously turned USB DEBUGGING on... I have come up with a new solution :
Using the ADB I will unlock the phone using the command
Code:
fastboot oem unlock
This will WIPE all the data from the phone, however it will allow me to finally install a custom recovery mod.
I am then going to find a way to connect the phone to the computer, clone the internal memory to a virtual hard drive and then use some recovery software to get back all the data that was "erased" when I unlocked the oem
Hopefully :fingers-crossed:....
I'll keep the thread updated
- Pano
▲Important Information before Continueing!
Panomosh said:
OK just to keep all updated and in case anyone ever uses this post in the future to help them...
I have tried everything, nothing worked as it either involved use of the touch screen at some point, or required me to have previously turned USB DEBUGGING on... I have come up with a new solution :
Using the ADB I will unlock the phone using the command
Code:
fastboot oem unlock
This will WIPE all the data from the phone, however it will allow me to finally install a custom recovery mod.
I am then going to find a way to connect the phone to the computer, clone the internal memory to a virtual hard drive and then use some recovery software to get back all the data that was "erased" when I unlocked the oem
Hopefully :fingers-crossed:....
I'll keep the thread updated
- Pano
Click to expand...
Click to collapse
This will only work, if the Computer has FULL ACCESS to the file system.
The best Data-Recovery Program is IsoBuster by Peter van Hoove.
...and also, it's not just normal deleting but WIPING, so recovery chance is very low.
...Nexus 4 ALWAYS makes god-damn' problems: RedLight of Death, No MicroSD, Data Loss because of Google's Locked Bootloader.
My Advice The Next time you buy a Device with Android - Unlock the bootloader to avoid further problems.
I hope you to fix all problems. All the best / Have a nice day
Tested on PLK-L01 from Germany.
Download the following file:
http://rootjunkysdl.com/getdownload.php?file=Huawei%20P8%20Lite/Huawei%20Product%20ID%20Generator.exe
Insert you IMEI1 and choose "HUAWEI Y300-0000" as model.
Copy the product ID.
On the following picture it is in german, but on the page it is described in english which information you have to enter.
Enter the information on following page: http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
You have to login via Facebook to get the code and it only works with facebook.
Every Facebook account can unlock two devices every six months.
You will get the unlock code marked red.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you tried also to flash something? (Root or xposed)
Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?
Aurevo said:
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?
Click to expand...
Click to collapse
Actually I've seen only that one, dunno if it would work. I'm like that my order is "waiting for stock" so other can try for me. XD
Worked for me
Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01
philipcraig said:
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01
Click to expand...
Click to collapse
Try the tutorial on gizdev!
haasgo said:
Try the tutorial on gizdev!
Click to expand...
Click to collapse
Is it useful to try it without an recovery image available? Some other user tried it and is in a bootloop now without the possibility to recover.
I also slashed beta-supersu, using the Chinese twrp. I didn't reboot in between flashing twrp and supersu. Maybe I should have.
Thanks!
Works perfect for me
What to do with the unlock code? I mean where to enter it?
Using your tip, I made this http://androidmtk.com/unlock-bootloader-of-huawei-honor-7
rahul964 said:
Using your tip, I made this http://androidxda.com/unlock-bootloader-of-huawei-honor-7
Click to expand...
Click to collapse
I get stuck on the step 10: after I fill everything out, it says "Sorry, you must use a phone account to submit this application."
I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.
philipcraig said:
I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.
Click to expand...
Click to collapse
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?
pappapishu said:
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?
Click to expand...
Click to collapse
Yes, and yes.
philipcraig said:
Yes, and yes.
Click to expand...
Click to collapse
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17
pappapishu said:
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17
Click to expand...
Click to collapse
Yes. Though mine seemed even more complex. I couldn't boot into the bootloader that way.
What I found is that via some combination of volume/power keys and having power plugged in or not, I finally:
* did a boot into safe-mode
* discovered I was rooted
* used to to install ROM manager
* rebooted, out of safe mode
* ran ROM manager
* rebooted to bootloader
And then did what dukey said.
strange i have tried to log using facebook button but it keeps sending me the '"Sorry, you must use a phone account to submit this application."'
any ideas?
Hi,
I got stuck when posting my numbers with the following answer:
We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks.
Click to expand...
Click to collapse
Has anybody else got stuck here or knows how to get around it?
I have not received an answer to the mail I sent them yesterday - I hope somebody replies at all
lippl
The .exe linked in the first post is not required to determine the product ID. It can be determined using universal code *#*#1357946#*#* (which returns an 8-digit code as expected)
Further, the .exe linked in the first post does not get a clean bill of health at VirusTotal - nothing definitive but not clean. Anyone planning to use it to generate an unlock code should use reasonable caution, sandbox the application or (better) run it on a disposable VM.
Hello,
Back in August of 2015 I bought a FreedomPop Samsung Galaxy S4 which I used with FreedomPop up until just recently when I signed up with RingPlus, ported my old FreedomPop number to my R+ account and then deactivated my FreedomPop account. OK, so.. my problem is is that now I can't use R+ because it requires me to update my PRL, but I can't. I get this error: "The PRL update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service. Error: Connection Error (6)"
Now, in the past when I was trying to root my phone I really screwed things up and ended up having to install new Firmware. You can find more information about that here: http://forum.xda-developers.com/galaxy-s4-sprint/help/caught-boot-loop-rooting-t3304144
Any help would be greatly appreciated, especially since my phone is practically useless at the moment.
-Chuck
Try dialing ###72786#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Try dialing ###72786#
Click to expand...
Click to collapse
When I tried that, the number disappeared when I added the last #. And it still won't let me update the PRL.
I think I know why that didn't work. I'm suppose to dial ##72786#, not ###72786#. I'm assuming you meant for me to reprovision my phone?
Anyway, I did that and seemed to be working fine, but then when I tried to update the PRL it, took me to hands free activation. Same when I tried to update my profile as well. How do I go about avoiding this?
I could really use some help here please.
Chuck38 said:
I could really use some help here please.
Click to expand...
Click to collapse
With what? If it updated profile and PRL them you are done. You only have to do this about once a month, not every day.
Alright. I should probably contact Ringplus directly about my other problem here.
Sorry for bothering you and thanks for the help.
Chuck38 said:
Alright. I should probably contact Ringplus directly about my other problem here.
Sorry for bothering you and thanks for the help.
Click to expand...
Click to collapse
Sorry, I missed that. I recommend Odining TWRP and then flashing the SuperSU zip in recovery for rooting.
bilgerryan said:
Sorry, I missed that. I recommend Odining TWRP and then flashing the SuperSU zip in recovery for rooting.
Click to expand...
Click to collapse
How would I go about Odining TWRP?
I've only used Odin to re-install my Firmware.
Chuck38 said:
How would I go about Odining TWRP?
I've only used Odin to re-install my Firmware.
Click to expand...
Click to collapse
Download TWRP and run it in the PDA slot.. Make sure to uncheck Auto Reboot.
bilgerryan said:
Download TWRP and run it in the PDA slot.. Make sure to uncheck Auto Reboot.
Click to expand...
Click to collapse
Alright. TWRP has been installed, as well as SuperUS. Just checked with Root Checker and my phone has been properly rooted.
However.. the problem still persists. I still am unable to get RingPlus to work with my phone. Perhaps because I can't update the PRL, it keeps taking me to hands free activation, or perhaps there's something else going on. I will see if I can contact RingPlus and see if they know what's wrong.
Thank-you for your assistance, I will report back if I get this figured out.