Database Users

Eonon Android 5.1.1 bluetooth issues & canbus issues

hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane

I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr

zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues

I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?

I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk

Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.

The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?

Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.

Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers

android 8.1 head unit - xonrich branded

Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload

Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal

ric69 said:
Hello, I have all those problem too with android 8.1 and also :
5 - cannot find accessibility settings to approved some apps like maps navigation or any app required to accept service (error service google play)
6 - brightness app is always automatic at boot (even if I untick auto)
I'm starting to think it's a bad deal
Click to expand...
Click to collapse
me too ... i am sorry to hear you are having the same issues ... i do feel if i could access the factory settings i could probably fix most issues
is your unit also xonrich?
i was wondering if it is possible to flash 7.1 software on to the unit as it is so so much better to use
the manual they send does not match the 8.1 software it is for 7.1 as ive had both units maybe if we could lay our hands on an 8.1 based manual this would help ?

Yes it's bad story, my unit has no name :laugh: I posted here this morning :
https://forum.xda-developers.com/an...units/8227l-android-unit-8-1-chinese-t3905535
It's incredible to not find any combination to reboot into recovery, I tried all I think
The only acces is MCU Update but without any update ... it's difficult
I have instructions.pdf in system, but there is nothing very important

Mine loses qualizer settings if o turn of car or if i change volume

I am sorry to hear your issues . Maybe this brand unit is not ready for Android 8.1. I am owning ATOTO A6 Pro. It works great even though it is Android 6.0.

Mine is same through seicane website

I found a you tube video
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel

Radio
Mgchata said:
Watch "how to enter into the factory settings Android 8.1 Car DVD GPS radio player" on YouTube
Go to YouTube and type in what is in qoutes. Pomah is the channel
Click to expand...
Click to collapse
I also own an Xonrich unit and the only problem I have is that when the radio tuner is working, the audios of other applications, for example radar announcers, do not sound, but if I turn off the tuner or put another audio source, including internet radio, TuneIn for example, these radar announcements are perfectly heard. The only thing they don't hear is with the radio tuner working.
I could not find the appropriate configuration to achieve it.
regards

Help and additional problems
sebwillcocks said:
Firstly hello i am new to the forum
i have been searching the web about this ever since i purchased my android head unit (about a week ago) as i have issues i cant seem to get my head around.
The unit is branded up as XONRICH (CHINESE UNIT) its running oreo 8.1
i previously had the same unit in my other car with no issues how ever was running 7.1 android - the settings seem alot more accessible on the 7.1
so here are my issues if anyone could shed some light on this
1- The time when i set to automatic it is one hour fast even when set to time zone london
2 - the canbus keep forgetting the head unit and not working to turn on and off with key ,reverse cam loss and steering controls - all works again after reset - i here you can set canbus to 0 or faint to amend ?
3 i cant access factory settings to play with any of the above as it is not even listed in the menu ..
4. i can not seem to change the boot logo to a personalized upload
Click to expand...
Click to collapse
Hi.
I also have some issues with the time on the unit being one hour fast, but after it's been on for a minute or two and GPS is fixed the time changes to the correct time.
Where did you buy your canbus for the unit? I have a Volvo V70 '04 which I want the steering wheel buttons to work with.
I'm also having trouble with the Bluetooth option missing in the settings list. Its only possible to pair the unit with Bluetooth trough the phone pair function on the unit. I really want to pair my OBD2 adapter to my unit but am unable to do so when there is no Bluetooth menu.
Is there a possible way to add this function to the unit trough a software upgrade or such?

BMW E8x E9x CIC PX6 Android 10,25" trouble with bluetooth, idrive, display ect.

Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri

Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri

Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!

Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314

Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.

same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)

GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri

AUTOPUMPKIN AA0495B issues with some bluetooth devices

NOTE: I tried to post a fully detailed write-up of my issues, with screenshots and links, but because I'm a new member the forum won't let me post this with those URL's in the post. Since there's no way to upload and attach images, I'm happy to provide all of this via alternative means, or update the post with the original links if an admin is willing to remove this restriction from my account (I promise I'm not a spammer of any kind)
Hi all,
First time poster here with some unique issues (at least for me) with one of the newer Android stereo units. (AA0495B)
I've already contacted AUTOPUMPKIN customer support and they were absolutely no help in solving this; I've also done my own testing and tinkering but haven't been able to get anything working so I'm hoping someone here with more knowledge of these Android units can help.
Late last year I got an AUTOPUMPKIN Android 9.0 unit (AA0495B) for my track car; the main reason I got it was to run my track timer apps directly from my car instead of having to run it from my phone in a dash mount as most do; the specific app I use is Harry's Laptimer. Now obviously this app was programmed with phone use in mind, but after a bit of doing I was able to get it working completely on the Android stereo unit, so my questions aren't around that app, but rather some secondary hardware related issues using the unit. Overall this stereo unit has been great and free of any major issues like ones I've seen on other XDA posts about other Android stereo units. The app works, connects to my GoPro over WiFi flawlessly, and records track sessions and syncs to video perfectly. My issue is that the HLT app also supports connecting to other kinds of devices via bluetooth for additional data capture, such as the XGPS160 for obtaining more accurate GPS lap data (The 160 captures GPS coordinates at 10Hz rather than the 1Hz of the AA0495B and most Android phones) and I'm having issues getting the stereo unit to connect to the XGPS160 device.
There are several problems in getting this to work, but to keep things simple I'll start with the first problem and then work down layer by layer as each issues is solved; hopefully, if we can get it to work, this thread can serve as a guide for others to get this stereo unit to connect to this and other GPS devices.
PROBLEM #1 - Getting the AA0495B unit to pair and connect to the XGPS160 over bluetooth
So obviously the first step is to get the XGPS160 connected to the head unit over BT. The instructions for this are fairly straightforward and in the XGPS160 manual which I followed. The AA0495B unit has its own custom UI for managing connections to bluetooth devices rather than using the native OS bluetooth menu. The native OS bluetooth menu can be found in the system menu, however when attempting to use it to pair to devices, no devices are detected. If we instead use the main menu Bluetooth button to open the custom BT interface and then hit the search button to scan for devices, the XGPS160 shows up when ready for pairing, so we know the BT radio is picking it up at least. I then click on the name of XGPS160 and press the Connect button to pair the device. After a few moments, the device name now shows as an "available device" meaning it is paired to the unit (at least in theory). We can then click on the name and click the Connect button again to attempt to connect the device. This is where it stops, as it never shows as being connected. For comparison, the UI does show blue "connected" icons when the stereo is connected to my Galaxy S9. It appears this custom BT UI will only show the blue symbols when the connected device is a phone; I also have an OBDII dongle paired and it will never show as connected from this screen, however apps like Torque Pro are able to make the stereo unit connect to it and pull OBD data from the car. I was hoping that maybe this was a case of this custom UI simply not showing that the device was connected when it actually is, like the OBDII device. I attempted to run the "Bluetooth GPS" helper app to see if I could get it to connect; however the XGPS160 doesn't even show up in the list of available devices, whereas the "OBDII" dongle is listed even though it's not currently connected. Presumably this menu is pulled from the OS's list of paired devices, so if I had to guess, perhaps the XGPS160 isn't really paired even though the Pumpkin custom BT UI shows it as paired?
In contrast, I was able to connect the XGPS160 to my Galaxy S9, update its firmware via the phone app, and install and run the helper apps to pull data from it, so there aren't any problems in the device itself, but appears to be an issue with the stereo unit.
Here are the About Machine details from the unit for reference:
Builder Number: 201907091031
Kernel Version:
4.4.167
#44 Mon 07 1 10:07:31 CST 2019
uboot-06 28 2019-18:00:06_M11 1024x600
MCU Version: CSN2_06252019_163051
CPU and Memory size:
64-bit 8-core Cortex-A53 1.5GHz
4GB TC:29C TGT:29C F0:1200M F1:816M
Model & Hardware: PX5
Android Version: 9
So with all that, does anyone have recommendations on next steps? I'm a software engineer by background (though not in smart devices) so I shouldn't have trouble performing any troubleshooting steps necessary.
thanks!

Figured out the issue
Circling back to update this one for anyone else who comes across this issue. Here's the response I got from Autopumpkin support
"After checked with our engineer,sorry to tell you that our headunit cannot connect to SkyPro XGPS160.the reason is car stereo Bluetooth is equivalent to a Bluetooth headset and it can only be connected passively.sorry about this."
So yeh, seems they cheaped out on the bluetooth module and that's the problem. Now if only I could find a way to disable it and use a USB bluetooth dongle I have instead.

I also have the problem with a Kingbaets K1+ Android 8.1
Unfortunately, it is only possible to establish the Bluetooth connections up to Android 6.0.
Later Android versions have a "castrated" Bluetooth interface.
My consequence was that I bought an OWNICE C500+ with Android 6.0.
With this device, Bluetooth hardware can pair with PIN input.
It works perfectly.
Dealers at aliexpress

Hizpo 3C (Roco K706) Root and General Help

I picked up a Hizpo 3C from Aliexpress for my Honda Accord. Seemed like a nice little package with the custom bezel etc.
I am having a few issues with it, the most annoying being the Bluetooth not working as I had to remove my factory Nav/Tech info screen to put this in and was replacing that with the BT OBD II scanner and running Torque Pro on the head unit.
In short it will connect to my phone via BT just fine, but it either can't find, or finds and won't connect to the OBD II scanner nor my Radar detector. (If anyone can help specifically with this I can go into the details)
The BT issue and the fact that I cannot change anything on the main screen. I tried running Nova Launcher and setting it to default but the head unit just changes it back to the factory crap. This led me to start looking on this forum for rooting / rom options.
So the name given on the sales ad page is Hizpo 3C, but from what I can tell from CPUz is that it is a "Roco K706". I have tried searching here and really anywhere on the internet and didn't find anything about these nor the build numbers. Attached are images from my CPUz that I am hoping you may be able to shed some light on what I am working with and what options I may have to trouble shoot and/or root to change launcher, uninstall the bloat apps etc.
I would also like some help with how I could go about ensuring there is no preinstalled spyware/malware etc. before I start adding more than just google play.
And an explanation on the "faked" android versions I see mine say 11, but has API 29 , and if I double tap the "Android 11" in setting it then brings up a full screen that only displays "Android 10" which I thought was funny.
Check for preinstalled malware
Bluetooth Issues
Change Loader screen

Bump

Did you ever figure this out? I have the same unit with the same issue.

Nope. Nope as you can see no replies here and after months of back and froth with the company they keep trying to have me do the same upgrade after I tell them its done. They say I can get a replacement but I have to send them EVERYTHING back to get another unit. Which now I don't think I want to do because you are moving closer to confirming my fears I would pay for that and get a new or refurb unit that will have the same problem. I am considering trying to return the whole thing for a refund.

Hi there, I think I just ordered the same unit. Did you reach anything regarding that unit?

Try update. Seller send me:
The system firmware link：
https://jitusystemfirmwaer1105.oss-eu-central-1.aliyuncs.com/update.zip
The MCU document link：
https://jitu321077708mcu1105.oss-eu-central-1.aliyuncs.com/mcu.bin

1.Download the two firmware from the two link in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.

4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.

7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.

After entering 114477 factory settings and clicking OK, general settings - system settings - about vehicle machines - click the version number continuously to open the developer mode

4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.

Not exactly related to the problems mentioned in this topic, but I bought a similar unit from Hizpo and one thing that drives me crazy is an annoying high-pitched noise coming from the speakers that makes my ears bleed. I ruled out all external factors (external interference, grounding issues etc.) and there seems to be no way to fix this. Do your units suffer from this as well or is mine just defective?

First connect to a power source at home.
If all ok then try to connect through a noise filter in auto

Vėžys said:
First connect to a power source at home.
If all ok then try to connect through a noise filter in auto
Click to expand...
Click to collapse
random question, I have a roco (k706) android 12 Api 31, I bought it 2 months ago and I was wondering if there are any updates, or who I contact to get them.
Currently I have:
Firmware: QF001.20220920.205721
MCU: QF01.V01.60.20220929.002121
Or it will be that before sending them they load the firmware and the newest MCU.
My problem is that when I connect the wifi it closes Android auto or Carplay and if I connect them again it disconnects me from the wifi.
And in case I need to activate Carletter, to whom do I have to send the QR to activate it again?

chesterrdk said:
atsitiktinis klausimas, turiu roco (k706) android 12 Api 31, nusipirkau pries 2 menesius ir galvojau, ar yra atnaujinimu, ar su kuo susisiekti, kad juos gautu.
Šiuo metu turiu:
Programinė įranga: QF001.20220920.205721
MCU: QF01.V01.60.20220929.002121
Arba bus taip, kad prieš juos išsiųsdami jie įkelia programinę-aparatinę įrangą ir naujausią MCU.
Mano problema yra ta, kad kai prijungiu „WiFi“, jis uždaro „Android auto“ arba „Carplay“, o jei vėl juos prijungiu, mane atjungia nuo „WiFi“.
O jei reikia suaktyvinti Carletter, kam turiu siųsti QR, kad vėl suaktyvinčiau?
Click to expand...
Click to collapse
chesterrdk said:
random question, I have a roco (k706) android 12 Api 31, I bought it 2 months ago and I was wondering if there are any updates, or who I contact to get them.
Currently I have:
Firmware: QF001.20220920.205721
MCU: QF01.V01.60.20220929.002121
Or it will be that before sending them they load the firmware and the newest MCU.
My problem is that when I connect the wifi it closes Android auto or Carplay and if I connect them again it disconnects me from the wifi.
And in case I need to activate Carletter, to whom do I have to send the QR to activate it again?
Click to expand...
Click to collapse
I sent the QR code to the seller and it activated Carletter.
Android auto works the same way. But I don't use it

Vėžys said:
I sent the QR code to the seller and it activated Carletter.
Android auto works the same way. But I don't use it
Click to expand...
Click to collapse
I bought this second-hand stereo from a car that was being sold for parts, do you think it would be possible that if I do the update and my carletter is deactivated, could you help me by sending my QR to activate it? I have to have the car connected to the internet while they do it I guess.

chesterrdk said:
I bought this second-hand stereo from a car that was being sold for parts, do you think it would be possible that if I do the update and my carletter is deactivated, could you help me by sending my QR to activate it? I have to have the car connected to the internet while they do it I guess.
Click to expand...
Click to collapse
I can try to write to the seller, but I do not promise whether he will activate

chesterrdk said:
random question, I have a roco (k706) android 12 Api 31, I bought it 2 months ago and I was wondering if there are any updates, or who I contact to get them.
Currently I have:
Firmware: QF001.20220920.205721
MCU: QF01.V01.60.20220929.002121
Click to expand...
Click to collapse
Hi, could you send me that firmware?
And does anyone know the password fpr the factory reset?? Its not the usual 0000,8888,123456 nor my google password.

Another problem: how can i connect the head unit to my PC to use ADB? The head unit has 2 USB-A connectors. I tried an USB-A to USB-A Cable without success. Also i can´t see the usb connection dialouge on the head unit because the status bar doesn´t show any notifications...
What i wanted to do with ADB: i want to use Nova Launcher on my head unit but it can´t access the OEM "apps" like FM radio or DSP. Tasker says it nees "permission.manage_activity_stacks" to start those apps. So i will try to give nova launcher this permission over ADB. Or does anyone have another suggestion to solve this problem?
Best regards

blue_one said:
Another problem: how can i connect the head unit to my PC to use ADB? The head unit has 2 USB-A connectors. I tried an USB-A to USB-A Cable without success. Also i can´t see the usb connection dialouge on the head unit because the status bar doesn´t show any notifications...
What i wanted to do with ADB: i want to use Nova Launcher on my head unit but it can´t access the OEM "apps" like FM radio or DSP. Tasker says it nees "permission.manage_activity_stacks" to start those apps. So i will try to give nova launcher this permission over ADB. Or does anyone have another suggestion to solve this problem?
Best regards
Click to expand...
Click to collapse
Connect ADB via Wifi, but must first enable developer option