Related
Check this link and follow the instruction for unlocking the bootloader- http://www.modaco.com/forums/topic/...your-honor-8-official-and-unofficial-methods/
For rooting your phone, download the latest version from the link provided, boot your phone into recovery mode (make sure you have TWRP installed) and flash the zip. Enjoy! https://download.chainfire.eu/696/supersu/
this phone is so new that there's barely anyone talking about it here on xda, so since there's no responses i'm mostly wondering how many people actually tried this and if anyone experienced any issues.
either way, thnx a lot for your work meraj99. i'm actually backing up my phone to unlock the bootloader and then root it as i'm writing this, so i'm pretty excited to finally get root
JimZiii said:
this phone is so new that there's barely anyone talking about it here on xda, so since there's no responses i'm mostly wondering how many people actually tried this and if anyone experienced any issues.
either way, thnx a lot for your work meraj99. i'm actually backing up my phone to unlock the bootloader and then root it as i'm writing this, so i'm pretty excited to finally get root
Click to expand...
Click to collapse
Don't download that version of SuperSU I had issues with it, my device boot looped, you need a forced systemless version
https://www.androidfilehost.com/?fid=24591000424939898
And also if you can please upload a backup of your system please I had to use an outdated rom from modaco to restore my device
JEANRIVERA said:
Don't download that version of SuperSU I had issues with it, my device boot looped, you need a forced systemless version
https://www.androidfilehost.com/?fid=24591000424939898
And also if you can please upload a backup of your system please I had to use an outdated rom from modaco to restore my device
Click to expand...
Click to collapse
I used this guide on my L09 and it worked without problems.
http://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946/page1
Sent from my HUAWEI VIE-L29 using XDA Labs
You can get an account with 4 credits for free via DC-Unlocks facebook page, you need 20 friends though. If you don't have facebook then you can get it for 1 usd from their android app.
The purchase is In-app and uses googles payment system so you can use the spare change from opinion rewards too.
m4ds3n said:
You can get an account with 4 credits for free via DC-Unlocks facebook page, you need 20 friends though. If you don't have facebook then you can get it for 1 usd from their android app.
The purchase is In-app and uses googles payment system so you can use the spare change from opinion rewards too.
Click to expand...
Click to collapse
What are you talking about? lol
Tikerz said:
What are you talking about? lol
Click to expand...
Click to collapse
To unlock your phone via DC-unlocker, you need four credits. I just mentioned how you could get them for cheaper than buying them via their program.
m4ds3n said:
To unlock your phone via DC-unlocker, you need four credits. I just mentioned how you could get them for cheaper than buying them via their program.
Click to expand...
Click to collapse
But are you mentioning this as someone who had "verified" success in this method? Sorry but pyramid schemed non dev focused sources are a bit schetchy, especially given the lack of dev due to the new phone and the other decampment issues going on currently
*mj13* said:
But are you mentioning this as someone who had "verified" success in this method? Sorry but pyramid schemed non dev focused sources are a bit schetchy, especially given the lack of dev due to the new phone and the other decampment issues going on currently
Click to expand...
Click to collapse
I understand your concern, both of the facebook page and the app is run by dc-unlocker themselves. If you look at their webpage you'll find links to both of them.
Personnaly the unofficial methode worked good for me because de Huawei club's website was broken for the captcha. I payed 0.99€ and got the Bootloader unlock code !
meraj99 said:
Check this link and follow the instruction for unlocking the bootloader- http://www.modaco.com/forums/topic/...your-honor-8-official-and-unofficial-methods/
For rooting your phone, download the latest version from the link provided, boot your phone into recovery mode (make sure you have TWRP installed) and flash the zip. Enjoy! https://download.chainfire.eu/696/supersu/
Click to expand...
Click to collapse
I run DriverSetup.exe (Huawei driver pack from https://files.dc-unlocker.com/share.html?v=share/88D4A98C154D4E19AF9D4A1EF09BA620), but nothing happens, and DC Unlocker doesnt find Honor 8.
What could be the problem?
Shyciii said:
I run DriverSetup.exe (Huawei driver pack from https://files.dc-unlocker.com/share.html?v=share/88D4A98C154D4E19AF9D4A1EF09BA620), but nothing happens, and DC Unlocker doesnt find Honor 8.
What could be the problem?
Click to expand...
Click to collapse
Did u do this?
On your phone, enter Manufacturer Mode - open the dialer and enter?**#*#2846579#*#*. In the app that then opens,?*select Project Menu -> Background settings -> USB ports settings -> Manufacturer Mode.
Sent from my HUAWEI VIE-L29 using XDA Labs
Mostar088 said:
Did u do this?
On your phone, enter Manufacturer Mode - open the dialer and enter?**#*#2846579#*#*. In the app that then opens,?*select Project Menu -> Background settings -> USB ports settings -> Manufacturer Mode.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Yes, sure, but cannot find my phone.
Shyciii said:
Yes, sure, but cannot find my phone.
Click to expand...
Click to collapse
I finally successfully unlocked, TWRP'd, and rooted this morning.
I believe I had to also swipe down the notification shade and tap Files where it says USB Charging.
guitardedhero said:
I finally successfully unlocked, TWRP'd, and rooted this morning.
I believe I had to also swipe down the notification shade and tap Files where it says USB Charging.
Click to expand...
Click to collapse
I try other usb port, other computer, but DC-Unlocker show doesnt found phone
Show Android Device in Other Device in the device manager.
Shyciii said:
I try other usb port, other computer, but DC-Unlocker show doesnt found phone
Show Android Device in Other Device in the device manager.
Click to expand...
Click to collapse
Did you check your USB notification to ensure that it was not used for charging only? Before and after the Manufacture Mode, tap Files in the USB notification, and then select in DC-Unlocker:
Huawei Phones and Auto Select
Also, I had made both $0.99 purchases within the DC-Unlocker Android app which gave me a User and Password in an email that I was able to input into the Server section of the Windows DC-Unlocker app under Unlock which may have helped.
Once the device is found in the lower left, choose Read Bootloader Code and DO NOT select Unlock in the upper right. Paste the Bootloader Code at the end of your "fastboot oem unlock xxxxxxxxxxxxxxx"
guitardedhero said:
Did you check your USB notification to ensure that it was not used for charging only? Before and after the Manufacture Mode, tap Files in the USB notification, and then select in DC-Unlocker:
Huawei Phones and Auto Select
Also, I had made both $0.99 purchases within the DC-Unlocker Android app which gave me a User and Password in an email that I was able to input into the Server section of the Windows DC-Unlocker app under Unlock which may have helped.
Once the device is found in the lower left, choose Read Bootloader Code and DO NOT select Unlock in the upper right. Paste the Bootloader Code at the end of your "fastboot oem unlock xxxxxxxxxxxxxxx"
Click to expand...
Click to collapse
Problem solved. I installed Huawei driver pack, then its not enough. I installed HiSuite (android device manager+driver), then the DC-Unlocker working fine, found my phone, and get code. Thx for your help.
Is there a root method for that L04 version?
jkbane said:
Is there a root method for that L04 version?
Click to expand...
Click to collapse
No one tested it yet.
jkbane said:
Is there a root method for that L04 version?
Click to expand...
Click to collapse
PalakMi said:
No one tested it yet.
Click to expand...
Click to collapse
You can use the twrp for L09 and flash SuperSU 2.76 after unlocking bootloader. It works. I just had issues trying to backup a ROM.
I just bought this phone from Cricket, and the first thing I do is unlock the dev menu and look at dev options. Imagine my surprise when I see an option to unlock the bootloader! YMMV: select on, enter your pattern/password (if needed), then accept the terms. When I get back to my computer I'll see what kind of trouble I can cause...
MAC10M1 said:
I just bought this phone from Cricket, and the first thing I do is unlock the dev menu and look at dev options. Imagine my surprise when I see an option to unlock the bootloader! YMMV: select on, enter your pattern/password (if needed), then accept the terms. When I get back to my computer I'll see what kind of trouble I can cause...
Click to expand...
Click to collapse
So what's the Update, was you able to do anything (root or custom recovery… etc)?
Sent from my Google Pixel using XDA Labs
adeptustech said:
So what's the Update, was you able to do anything (root or custom recoveryâ?¦ etc)?
Click to expand...
Click to collapse
I have done the same thing with my boot loader. Unfortunately I have no idea how to do anything else with it
Do you think if I side loaded the TWRP I would be okay? I'm not sure how I would reverse it if it didnt work.
kireflow90 said:
Do you think if I side loaded the TWRP I would be okay? I'm not sure how I would reverse it if it didnt work.
Click to expand...
Click to collapse
We would have to figure out how to back up the original recovery. You could also try the fastboot boot command. That's pretty much a sure way to boot a recovery without messing things up but it has to be in .IMG format to try it.
By any chance has anyone tried the root permission setting found in engineering mode under settings? Dial *#*#2637643#*#* in your dialer to access it
Asadullah said:
We would have to figure out how to back up the original recovery. You could also try the fastboot boot command. That's pretty much a sure way to boot a recovery without messing things up but it has to be in .IMG format to try it.
By any chance has anyone tried the root permission setting found in engineering mode under settings? Dial *#*#2637643#*#* in your dialer to access it
Click to expand...
Click to collapse
I didn't even know about that menu. I turned it on the. Turned it off lol
kireflow90 said:
I didn't even know about that menu. I turned it on the. Turned it off lol
Click to expand...
Click to collapse
I don't think it does anything I did find a way to turn off ota updates though
has anyone tried root genius?
kireflow90 said:
has anyone tried root genius?
Click to expand...
Click to collapse
I will if you link me to it and it's free.
On a side note for any potential developers there are several open source projects to read write to the Qualcomm devices on github I'll link em after work. And I have the Qualcomm signing keys they use if that'll help
Asadullah said:
I will if you link me to it and it's free.
On a side note for any potential developers there are several open source projects to read write to the Qualcomm devices on github I'll link em after work. And I have the Qualcomm signing keys they use if that'll help
Click to expand...
Click to collapse
http://rootgenius.com/
kireflow90 said:
http://rootgenius.com/
Click to expand...
Click to collapse
It doesn't work
How did you unlock the bootloader? What do I need to do? I think I can find a way to root of my bootloader is unlocked. And also I am working on porting Ubuntu touch (and maybe tizen) to this device
https://forum.xda-developers.com/idol-4s/how-to/6055u-root-method-t3598947
Heres a link to the thread that goes over rooting the 60555u. Its kind of simple if you have some patience, and on page 5 i made a short guide on what i did to get it working. Check it out and get your phone rooted.
Do you think there might be a root for Alcatel idol 5 cricket?
Is the cricket idol 5 in sugar? If so, the same could pry be done that was done to the idol 4
alcatel idol 4 (6055u) carrier cricket
hi sir need help after unlock phone call not working LTE internet work
fazzy2010 said:
hi sir need help after unlock phone call not working LTE internet work
Click to expand...
Click to collapse
What software you running? I'm on 6055U with Cricket as well. I'm using CricketRom
Does anyone find a working method with this model ?
I have tried different ones but none is working, even downgraded the firmware to the oldest one I could find.
Be aware that a certain method will not work with every model, even the same model it may work with certain builds only.
Samsung continues update security patches to fix loopholes that people are using to bypass FRP, so when posting a working method, please be specific: what model and build you did bypass successfully.
Since no one has the solution, I search and find this method.
The firmware must be downgraded to PH3. Current firmware is QA4. This is for US firmware; other regions with the same version might not work.
This method use Talk Back to open Chrome, then download Google Account Manager, Quick Shortcut Maker, then ES File Explorer.
You need Samsung and Google accounts to use this method . When TalkBack is ON, double tap to open, use two fingers to roll up and down.
https://www.youtube.com/watch?v=xtVHzM_wc0k
Beut said:
Be aware that a certain method will not work with every model, even the same model it may work with certain builds only.
Samsung continues update security patches to fix loopholes that people are using to bypass FRP, so when posting a working method, please be specific: what model and build you did bypass successfully.
Since no one has the solution, I search and find this method.
The firmware must be downgraded to PH3. Current firmware is QA4. This is for US firmware; other regions with the same version might not work.
This method use Talk Back to open Chrome, then download Google Account Manager, Quick Shortcut Maker, then ES File Explorer.
You need Samsung and Google accounts to use this method . When TalkBack is ON, double tap to open, use two fingers to roll up and down.
https://www.youtube.com/watch?v=xtVHzM_wc0k
Click to expand...
Click to collapse
Can you tell me where to find that version? I'm assuming that I need to flash it with Odin. Is that right?
https://samsung-firmware.org/downlo...0, Wi-Fi)/9z98/XAR/T280XXU0APH3/T280XAR0APH3/
This is the version works with TalkBack method. Make sure you are familiar with the touchscreen when Talkback in on, which requires double tap and two fingers to roll up and down. As usual, you always flash firmware with Odin.
There's is a simpler way to bypass FRP on this device.
No need for a Samsung account or to downgrade account manager.
1. To activate accessibility mode just press HOME key 3 times.
2. Follow the tutorial until Chrome browser is opened and the Galaxy apps site is opened.
3. Type Browser in the search field and download Samsung Internet browser and install it.
4. Open the browser once installed and search for QuickShortcutMaker. Download it.
5. Tap the Bookmark icon top right in the browser, cancel the pop up then select HISTORY then DOWNLOAD HISTORY.
6. Install and run QuickShortcutMaker then follow the rest of the tutorial.
today i got same model tablet in frp and i was trying to remove it from z3x box but it was saying that adb shold be on for this action.....then i was having another dongle for samsung wich is called BST dongle so i treid it on and the frp was gone just a single click
zadi khan said:
today i got same model tablet in frp and i was trying to remove it from z3x box but it was saying that adb shold be on for this action.....then i was having another dongle for samsung wich is called BST dongle so i treid it on and the frp was gone just a single click
Click to expand...
Click to collapse
Seems like a very expensive solution for something you can do for zero money. You can buy an SM-T280 on eBay for less.
ashyx said:
There's is a simpler way to bypass FRP on this device.
No need for a Samsung account or to downgrade account manager.
1. To activate accessibility mode just press HOME key 3 times.
2. Follow the tutorial until Chrome browser is opened and the Galaxy apps site is opened.
3. Type Browser in the search field and download Samsung Internet browser and install it.
4. Open the browser once installed and search for QuickShortcutMaker. Download it.
5. Tap the Bookmark icon top right in the browser, cancel the pop up then select HISTORY then DOWNLOAD HISTORY.
6. Install and run QuickShortcutMaker then follow the rest of the tutorial.
Click to expand...
Click to collapse
Chrome doesnt open anymore due to security reasons. is there any chance to bypass the FRP lock ?
xapobilo said:
Chrome doesnt open anymore due to security reasons. is there any chance to bypass the FRP lock ?
Click to expand...
Click to collapse
Just downgrade to earlier firmware.
ashyx said:
Just downgrade to earlier firmware.
Click to expand...
Click to collapse
Thanks for your quick reply which gives me the hope to fix the problem. With the informations i've found i am now a bit confused and not 100% sure if i am going the right way. Please correct me if I am wrong.
I assume i would need to download the T280XXU0APH3_T280XAR0APH3_HOME.tar.md5 with almost 2GB, then mount it to Odin AP slot, then run it and it is it?
xapobilo said:
Thanks for your quick reply which gives me the hope to fix the problem. With the informations i've found i am now a bit confused and not 100% sure if i am going the right way. Please correct me if I am wrong.
I assume i would need to download the T280XXU0APH3_T280XAR0APH3_HOME.tar.md5 with almost 2GB, then mount it to Odin AP slot, then run it and it is it?
Click to expand...
Click to collapse
That's correct.
re help on sm-t280.
i guys how are you?
my sons messed around in their tab and my wife forgot wich mail she had created for the tab and now...zip...cant use tab for schooll.
can you guys help me...just flashed to old firm and sttill cant unlock.
xapobilo said:
Thanks for your quick reply which gives me the hope to fix the problem. With the informations i've found i am now a bit confused and not 100% sure if i am going the right way. Please correct me if I am wrong.
I assume i would need to download the T280XXU0APH3_T280XAR0APH3_HOME.tar.md5 with almost 2GB, then mount it to Odin AP slot, then run it and it is it?
Click to expand...
Click to collapse
kalisamurai said:
i guys how are you?
my sons messed around in their tab and my wife forgot wich mail she had created for the tab and now...zip...cant use tab for schooll.
can you guys help me...just flashed to old firm and sttill cant unlock.
Click to expand...
Click to collapse
Press HOME button 3 times at the first page of setting to turn TALK BACK or Voice Assistant ON, then watch the video.
Draw the L to turn on global setting then follow steps to get the Chrome browser. You may to try the L many times.
You have to tell what you did, otherwise nobody has no idea how to help you. Many users did not follow steps properly, that's reason they failed.
This bypass FRP is a piece of cake if you do it properly.
I have the SM-T580 tablet and FRP is on. Downloaded android 6.1 (US) and manage to flash it but it did give me an notice about "PIT" but flashed 100% in odin. Tried to follow your video but as soon as I click on Chrome it says for security reasons I can't access it.
RenVilo said:
I have the SM-T580 tablet and FRP is on. Downloaded android 6.1 (US) and manage to flash it but it did give me an notice about "PIT" but flashed 100% in odin. Tried to follow your video but as soon as I click on Chrome it says for security reasons I can't access it.
Click to expand...
Click to collapse
If you are able to downgrade to Android 6, then it's not impossible to unlock FRP.
Here is alternative way and faster:
-Download Quick Shortcut Maker 2.4 and Google Account Manager 6 , then save them in your SD card.
-Use Assist to open Google Search page, then type My File
- You should see your SD card, open the two needed apps and install them.
- The rest is the same as other method.
I'm hoping this method is still viable, the downgrade method. I recently came into some samsung tablets that were crytpo erased but are still frp locked. Hoping to salvage them. I tried a method for auto enabling adb, involved downloading a firmware and then using this tool to remake the firmware which was supposed to 'auto enable adb' didn't work for me. I tried obviously just flashing the firmware and that was successful however, still frp locked. I couldn't find the exact firmware mentioned above. Is there a way to see what firmware i'm on from a locked device? I haven't figured out how myself if there is. Open to any suggestion at this point. Looking over this lot of 30 + tablets
killerskincanoe said:
I'm hoping this method is still viable, the downgrade method. I recently came into some samsung tablets that were crytpo erased but are still frp locked. Hoping to salvage them. I tried a method for auto enabling adb, involved downloading a firmware and then using this tool to remake the firmware which was supposed to 'auto enable adb' didn't work for me. I tried obviously just flashing the firmware and that was successful however, still frp locked. I couldn't find the exact firmware mentioned above. Is there a way to see what firmware i'm on from a locked device? I haven't figured out how myself if there is. Open to any suggestion at this point. Looking over this lot of 30 + tablets
Click to expand...
Click to collapse
It will always be viable because Samsung don't bother updating this device.
However there is any easier way that doesn't require messing about downgrading.
You will need the combo boot image though or an adb enabled boot image.
ashyx said:
It will always be viable because Samsung don't bother updating this device.
However there is any easier way that doesn't require messing about downgrading.
You will need the combo boot image though or an adb enabled boot image.
Click to expand...
Click to collapse
Hello, glad to see your reply. And you seem to be talking about exactly the method I tried.
I followed this guide here
I used this firmware T280XXU0APC5_T280XAR0APC5_HOME.tar
I used the tool and made the adb enabled file to flash
flashed with odin, it was successful, however, i am unable to access the device via adb after flash...
perhaps there is a step i'm missing?
---------- Post added at 07:54 AM ---------- Previous post was at 07:38 AM ----------
killerskincanoe said:
perhaps there is a step i'm missing?
Click to expand...
Click to collapse
After flashing the adb enabled firmware and the device reboots and i plug back into the PC, it just shows up under {Portable Devices} as Galaxy Tab A (2016) I do have the Samsung drivers installed.
ashyx said:
You will need the combo boot image though or an adb enabled boot image.
Click to expand...
Click to collapse
Willing and able to give the combo image you are talking about a try if you can point me in the right direction.
@ashyx Still looking for that combo image. I'm a little apprehensive to download some thing's i've found when looking. Any chance you can suggest one you know works? Thanks in advance.
killerskincanoe said:
@ashyx Still looking for that combo image. I'm a little apprehensive to download some thing's i've found when looking. Any chance you can suggest one you know works? Thanks in advance.
Click to expand...
Click to collapse
I'll come back to you once I've checked.
Alright so I was bored and started poking around trying to find a way to get the MSL. Well after a couple hours of trail and error, I got it! Here's how.
You will need: ADB, ADB Drivers, and a rooted device.
Plug in your phone into your computer.
Run the following (in CMD) :
1: adb shell
2: su
3: am start com.sec.hiddenmenu/.Program_Edit
It should open a menu with your MSL at the bottom. Hope this helped!
I have tested this on Android 5.0.1 and Android 6.0.
Poebat said:
Alright so I was bored and started poking around trying to find a way to get the MSL. Well after a couple hours of trail and error, I got it! Here's how.
You will need: ADB, ADB Drivers, and a rooted device.
Plug in your phone into your computer.
Run the following (in CMD) :
1: adb shell
2: su
3: am start com.sec.hiddenmenu/.Program_Edit
It should open a menu with your MSL at the bottom. Hope this helped!
I have tested this on Android 5.0.1 and Android 6.0.
Click to expand...
Click to collapse
Can I achieve sim unlock on 6.0.1 after having this msl code? Or why do I need the msl code
jazzdglass said:
Can I achieve sim unlock on 6.0.1 after having this msl code? Or why do I need the msl code
Click to expand...
Click to collapse
You need the MSL to edit APNs, enable / disable bands of LTE, etc. Not sure if you can SIM unlock on 6.0.1. I have heard that people have had success unlocking their devices with the MSL code on 5.0
Poebat said:
You need the MSL to edit APNs, enable / disable bands of LTE, etc. Not sure if you can SIM unlock on 6.0.1. I have heard that people have had success unlocking their devices with the MSL code on 5.0
Click to expand...
Click to collapse
You know how to? I might give it a try
jazzdglass said:
You know how to? I might give it a try
Click to expand...
Click to collapse
Sim unlock? No but look through the forums. Also look on the sprint s6 forums too... If your contract is up just do a UUIC unlock under system update. That should sim unlock your phone.
Poebat said:
Sim unlock? No but look through the forums. Also look on the sprint s6 forums too... If your contract is up just do a UUIC unlock under system update. That should sim unlock your phone.
Click to expand...
Click to collapse
Hey @Poebat, how do we do the UUIC unlock under system update? Every time I press it I get the hands free activation window popping up. I bought this SM-G900P used and unlocked from a Canadian retailer to use here in Canada. I worked fine with my Canadian carrier sim card until I did a factory reset and now it's apparently relocked. I called Sprint and they said there is a region lock on the phone (after giving them the IMEI number) and refuse to help or unlock the phone again unless I set up a Sprint account...
Any help is greatly appreciated.
Shipwreck65 said:
Hey @Poebat, how do we do the UUIC unlock under system update? Every time I press it I get the hands free activation window popping up. I bought this SM-G900P used and unlocked from a Canadian retailer to use here in Canada. I worked fine with my Canadian carrier sim card until I did a factory reset and now it's apparently relocked. I called Sprint and they said there is a region lock on the phone (after giving them the IMEI number) and refuse to help or unlock the phone again unless I set up a Sprint account...
Any help is greatly appreciated.
Click to expand...
Click to collapse
I would take it to your carrier and ask them to unlock it. After that I would create a TWRP backup just in case.
As for the UUIC lock, you need to have the phone activated on sprint unfortunately.
Poebat said:
I would take it to your carrier and ask them to unlock it. After that I would create a TWRP backup just in case.
As for the UUIC lock, you need to have the phone activated on sprint unfortunately.
Click to expand...
Click to collapse
Thanks for the quick reply @Poebat. If I can't fix the issue by 3PM EST today I will be seeing if my carrier can unlock it LOL. I do have a NAND back up from TWRP from when the phone was actually working with my carriers SIM and want to try and flash that back to the phone, but need some help before I try it. Would you be able to possibly look at the thread I posted with what I'm trying to do and see if you might be able to help?
Thanks in advance if you can. The thread is here:
https://forum.xda-developers.com/galaxy-s5/general/question-creating-twrp-flashable-file-t3647355
Shipwreck65 said:
Thanks for the quick reply @Poebat. If I can't fix the issue by 3PM EST today I will be seeing if my carrier can unlock it LOL. I do have a NAND back up from TWRP from when the phone was actually working with my carriers SIM and want to try and flash that back to the phone, but need some help before I try it. Would you be able to possibly look at the thread I posted with what I'm trying to do and see if you might be able to help?
Thanks in advance if you can. The thread is here:
https://forum.xda-developers.com/galaxy-s5/general/question-creating-twrp-flashable-file-t3647355
Click to expand...
Click to collapse
I've tried to make a flashable backup before... I spent awhile trying to get it to work but in the end I failed. So I don't know how to help you there. You mentioned that you got an error when you tried to restore that backup. What was the error?
Poebat said:
I've tried to make a flashable backup before... I spent awhile trying to get it to work but in the end I failed. So I don't know how to help you there. You mentioned that you got an error when you tried to restore that backup. What was the error?
Click to expand...
Click to collapse
It was the dreaded "extractTarFork() process ended with ERROR=255" LOL. A lot of people have had it apparently but in all the threads I read on here no one had solved it yet. So I thought I would try the way I mentioned in my linked post.
Hey @Poebat I'm gonna get my MSL number here, but just need to know first... When connecting to the phone with adb should the phone be in download mode or just turned on and connected?
Shipwreck65 said:
Hey @Poebat I'm gonna get my MSL number here, but just need to know first... When connecting to the phone with adb should the phone be in download mode or just turned on and connected?
Click to expand...
Click to collapse
Turned on and connected. Make sure adb debugging is enabled in settings. Download mode is something completely different btw
Poebat said:
Turned on and connected. Make sure adb debugging is enabled in settings. Download mode is something completely different btw
Click to expand...
Click to collapse
Sweet baby Jeebuz I'm in!!!!!!!!!!!!!! LMAO thanks a million @Poebat!!!! Got my MSL code (that's the one at the bottom that's named Service Programming Code right?) I was also able to edit my phone number from 000-000-1989 to my correct number as well.... Do you happen to know if the AKEY thing at the top is used for unlocking the phone and if so do you know how I might get the AKEY code?
Thanks a million again for getting me this far....
Shipwreck65 said:
Sweet baby Jeebuz I'm in!!!!!!!!!!!!!! LMAO thanks a million @Poebat!!!! Got my MSL code (that's the one at the bottom that's named Service Programming Code right?) I was also able to edit my phone number from 000-000-1989 to my correct number as well.... Do you happen to know if the AKEY thing at the top is used for unlocking the phone and if so do you know how I might get the AKEY code?
Thanks a million again for getting me this far....
Click to expand...
Click to collapse
Not sure what the akey is. Sorry
No-Root Needed
Poebat said:
Alright so I was bored and started poking around trying to find a way to get the MSL. Well after a couple hours of trail and error, I got it! Here's how.
You will need: ADB, ADB Drivers, and a rooted device.
Plug in your phone into your computer.
Run the following (in CMD) :
1: adb shell
2: su
3: am start com.sec.hiddenmenu/.Program_Edit
It should open a menu with your MSL at the bottom. Hope this helped!
I have tested this on Android 5.0.1 and Android 6.0.
Click to expand...
Click to collapse
No root needed / Also works for other manufactures not just Samsung (test on Samsung and LG):
adb shell
logcat
open dialer ##3424#
enter any 6 numbers press ok
disconnect usb from phone
"scroll up and look for MSL activity in logcat it will list your MSL code"
deshaney said:
No root needed / Also works for other manufactures not just Samsung (test on Samsung and LG):
adb shell
logcat
open dialer ##3424#
enter any 6 numbers press ok
disconnect usb from phone
"scroll up and look for MSL activity in logcat it will list your MSL code"
Click to expand...
Click to collapse
Good to know.
How do you root an android device ?
Kpwgf143 said:
How do you root an android device ?
Click to expand...
Click to collapse
Google it
msl
Poebat said:
Alright so I was bored and started poking around trying to find a way to get the MSL. Well after a couple hours of trail and error, I got it! Here's how.
You will need: ADB, ADB Drivers, and a rooted device.
Plug in your phone into your computer.
Run the following (in CMD) :
1: adb shell
2: su
3: am start com.sec.hiddenmenu/.Program_Edit
It should open a menu with your MSL at the bottom. Hope this helped!
I have tested this on Android 5.0.1 and Android 6.0.
Click to expand...
Click to collapse
(Thanx alot..so is the Service programming code the actual msl?)
jlgreen36 said:
(Thanx alot..so is the Service programming code the actual msl?)
Click to expand...
Click to collapse
They are the same thing.
Hi everyone, I just want to share this tutorial for someone like me (NEWBIE, NOOB, BEGINNER, ZERO KNOWLEDGE).
ALL CREDITS TO THE RIGHTFUL OWNER.
PRE-REQUISITES
- Laptop
- Applications, .img files (https://mega.nz/file/igphSCTD#OybJo9t1zwvJ0bdbAcN2BCqxWXAfHdhk3JFB4_5xkVc)
- Your Nubia Phone
ENSURE THAT:
- You installed the application and driver (Minimal ADB and Fastboot & the driver from your Nubia phone).
- You updated your OS in the latest version.
- You UNLOCK the developer option (setting>>about phone>>tap 7x the build number) and you switch ON the OEM unlocking & USB Debugging.
- You approved the RSA request in your RM5G
NUBIA RED MAGIC 5G UNLOCK BOOTLOADER
1. Connect your Nubia in laptop, in your laptop, open Minimal ADB and Fastboot and type the following:
a. adb reboot bootloader
b. fastboot oem nubia_unlock NUBIA_NX659J
c. fastboot flash recovery recovery-TWRP-3.4.1B-0324-NUBIA_REDMAGIC_5G-CN-wzsx150.img
d. fastboot flash vbmeta vbmeta_BL_skip.img
e. fastboot flash modem NON-HLOS.bin
f. fastboot flash parameter parameter.img
2. Go to your RM5G, select reboot to recovery
3. It will reboot in TWRP twice, in the 2nd reboot it will stay in TWRP, change the language to English and select the keep read only.
4. Go to WIPE option, then select FORMAT DATA, type yes
5. Press home button, then go to REBOOT, select REBOOT to RECOVERY
NUBIA RED MAGIC 5G ROOTING PROCEDURE
6. Go to ADVANCED, below there are list, select INSTALL ROOT.
7. Reboot your RM5G.
At first, my RM5G restart twice, I was afraid that it was bootloop, the 3rd boots, it booted up and its rooted already.
Also, when I first registered my Finger Print, it’s malfunctioning, so I just deleted the OLD FP , register NEW FP and it works like a charm.
Now, I managed to flash the wonderful kernel of @mslezak.
Credits:
@mslezak - for his tutorial,
files we used in this thread https://forum.xda-developers.com/nu...how-to-unlock-bootloader-redmagic-5g-t4081743
And kernel in this thread: https://forum.xda-developers.com/nu...od-kernel-red-magic-5g-simply-source-t4112811
Ibr ALnaQbi - for his video tutorial
And to all who made it successful.
Great job bro !
Note for those that don't know how to enable developer options - go to settings, about phone, click build number 7x. It should take you right to the Developer Options menu. Nice clear concise guide by the way! Glad someone wrote a simpler one than the one I wrote initially, only so many hours in the day.
mslezak said:
Note for those that don't know how to enable developer options - go to settings, about phone, click build number 7x. It should take you right to the Developer Options menu. Nice clear concise guide by the way! Glad someone wrote a simpler one than the one I wrote initially, only so many hours in the day.
Click to expand...
Click to collapse
Thanks for mentioning the dev. option. All credit to all of you guys who made this possible.
I've been trying for days to download the MEGA zip, but no matter what I do it always stays on 0% and gives me an error. I tried on different browsers, on different computers, and using the desktop app, I even tried with the mobile app with no luck. Could someone please share a mirror or another link, please?
Nevermind, I was finally able to download the file, my solution was to use chrome instead of firefox and close every window except the mega one... I left it like that for a couple of hours and it finally downloaded it.
Possibly a stupid question, but are there any downsides to this other than the risk of bricking?
samussamus1 said:
Possibly a stupid question, but are there any downsides to this other than the risk of bricking?
Click to expand...
Click to collapse
If you follow the tutorial, there will be no problem even soft brick.
luis7654 said:
Nevermind, I was finally able to download the file, my solution was to use chrome instead of firefox and close every window except the mega one... I left it like that for a couple of hours and it finally downloaded it.
Click to expand...
Click to collapse
Its a normal troubleshooting, if its not working to other browser, try another one, great to hear that you managed, happy rooting.
CaLix25 said:
If you follow the tutorial, there will be no problem even soft brick.
Click to expand...
Click to collapse
Thanks but this isn't what I meant, I was thinking more so of apps not working due to root detection. Banking apps or others?
-
Sam
samussamus1 said:
Thanks but this isn't what I meant, I was thinking more so of apps not working due to root detection. Banking apps or others?
-
Sam
Click to expand...
Click to collapse
You can hide the Magisk (setting/select the apps/then hide magisk) so it will not detect that you are rooted.
CaLix25 said:
You can hide the Magisk (setting/select the apps/then hide magisk) so it will not detect that you are rooted.
Click to expand...
Click to collapse
Brilliant, thank you!
-
Sam
Hi,
2 questions. First of all, does this method work for all of the 5G phones? As in the European version etc. And second of all, will the phone brick if you update it via OTA, or do we need to do this method every time?
Noahesbjerg said:
Hi,
2 questions. First of all, does this method work for all of the 5G phones? As in the European version etc. And second of all, will the phone brick if you update it via OTA, or do we need to do this method every time?
Click to expand...
Click to collapse
Hi,
1. Yes its applicable for all version.
2. Yes it will brick your phone when updating via OTA
you can take a screen for hide magisk for app (Root) because I can't find it.
and still no solution to recover the fingerprint reader? thank you
cyberpunkfw1983 said:
you can take a screen for hide magisk for app (Root) because I can't find it.
and still no solution to recover the fingerprint reader? thank you
Click to expand...
Click to collapse
Hi, see attached. You have to rename the Magisk after selecting in pic. # 1.
You can find the FP calibration procedure here in XDA.
Ty ?
Hi Guys, first of all thanks for awesome tutorial. Got it rooted and enjoying the perks. However, some issues do exist. 1. The phone has detected a new update v4.09. Will the root be deactivated if I update the system? Second question, my banking app is detecting the root and does not want to start. I did set magisk manager to hide it from the app and restarted the phone even, but no luck the app still sees the root. Any solution for it? Thanks all
hello I would like to know how to put it back original? bootloader, Root ... thank you
Zigi86 said:
Hi Guys, first of all thanks for awesome tutorial. Got it rooted and enjoying the perks. However, some issues do exist. 1. The phone has detected a new update v4.09. Will the root be deactivated if I update the system? Second question, my banking app is detecting the root and does not want to start. I did set magisk manager to hide it from the app and restarted the phone even, but no luck the app still sees the root. Any solution for it? Thanks all
Click to expand...
Click to collapse
1. If you updated your RM5G before rooting, its bug, ignore it.
2. Mine is working as i showed in the photo above (ANB)