Hi I hope someone could help me with this problem I have for 3 weeks.
My Zenfone 5 is in 5.0 Lollipop (3.24.40.87). After updating from kitkat, I lost my Baseband and my IMEI.
Now I have an Idea, because I've checked the /config and /factory paritions(can be viewed if you mount them via terminal) and they have the folder called Telephony and has modembinary.fls files in it. I think it has the Baseband files in it. It would be great if someone could share their /config(mmcblk0p3) and /factory(mmcblk0p5) partitions so I could test if the backups can fix it. Don't worry, I don't need you IMEI, once it works, I will try to find a way to rewrite my own IMEI over yours and if I don't, I will mess up my baseband back so I won't keep your IMEI and just buy a new motherboard. And also, please tell me what version of firmware that you have so I could go down or up to what you have and possible test it on my phone.
Any help is much appreciated. The backup should come from a Working Zenfone 5 and has a baseband. not from a phone that has the same problem as mine.
Hello,
There can be a way to solve your problem
(this solution also can be useful for any other broken systems)
ZENFONE 5 (T00F, T00J) ONLY!
Required downloads:
Jelly Bean Firmware
Intel USB Drivers
ADB+Fastboot
Offline Update Image Script
Steps:
Install the Intel USB Drivers
Rename the Jelly Bean Firmware file, changing the extension from .raw to .zip
Create a directory for all the files (e.g.: C:\zenfone)
Extract the contents of the Jelly Bean Firmware and ADB+Fastboot on the directory you just created
Copy the file of Offline Update Image Script (sec_offline_update_image.cmd) to the same directory
Shutdown your phone and start in droidboot mode (Power + Vol. Up)
Plug the USB
Assert that your device is connected, check by running the command fastboot devices on a Command Prompt
Go to the directory you created before and run the file sec_offline_update_image.cmd as administrator
When your device reboot again into bootloader, check if there was no errors (the userdata erase error can be ignored with no problems). If there was any error, I recommend you to go back and check if you done all steps correctly. If not, just use the volume buttons to select the option 'Reboot' and activate it by pressing the Power key
After this is done, you can upgrade to KitKat or Lollipop via recovery, just download the update from Asus site and sideload it via ADB.
Thanks!
dgadelha said:
Hello,
There can be a way to solve your problem
(this solution also can be useful for any other broken systems)
ZENFONE 5 (T00F, T00J) ONLY!
Required downloads:
Jelly Bean Firmware
Intel USB Drivers
ADB+Fastboot
Offline Update Image Script
Steps:
Install the Intel USB Drivers
Rename the Jelly Bean Firmware file, changing the extension from .raw to .zip
Create a directory for all the files (e.g.: C:\zenfone)
Extract the contents of the Jelly Bean Firmware and ADB+Fastboot on the directory you just created
Copy the file of Offline Update Image Script (sec_offline_update_image.cmd) to the same directory
Shutdown your phone and start in droidboot mode (Power + Vol. Up)
Plug the USB
Assert that your device is connected, check by running the command fastboot devices on a Command Prompt
Go to the directory you created before and run the file sec_offline_update_image.cmd as administrator
When your device reboot again into bootloader, check if there was no errors (the userdata erase error can be ignored with no problems). If there was any error, I recommend you to go back and check if you done all steps correctly. If not, just use the volume buttons to select the option 'Reboot' and activate it by pressing the Power key
After this is done, you can upgrade to KitKat or Lollipop via recovery, just download the update from Asus site and sideload it via ADB.
Thanks!
Click to expand...
Click to collapse
Just like to ask if the .raw file has all of the paritions including the /config and /factory partitions since that is messed up on my phone. I will try this tho. Thanks!
NostalgiaZ said:
Just like to ask if the .raw file has all of the paritions including the /config and /factory partitions since that is messed up on my phone. I will try this tho. Thanks!
Click to expand...
Click to collapse
Just try it.
dgadelha said:
Just try it.
Click to expand...
Click to collapse
Will do. Thanks. I will give feedback after doing so.
I have problem with my imei, but my ZF5 have a baseband, and this method don't work for me.
dgadelha said:
Hello,
There can be a way to solve your problem
(this solution also can be useful for any other broken systems)
ZENFONE 5 (T00F, T00J) ONLY!
Required downloads:
Jelly Bean Firmware
Intel USB Drivers
ADB+Fastboot
Offline Update Image Script
Steps:
Install the Intel USB Drivers
Rename the Jelly Bean Firmware file, changing the extension from .raw to .zip
Create a directory for all the files (e.g.: C:\zenfone)
Extract the contents of the Jelly Bean Firmware and ADB+Fastboot on the directory you just created
Copy the file of Offline Update Image Script (sec_offline_update_image.cmd) to the same directory
Shutdown your phone and start in droidboot mode (Power + Vol. Up)
Plug the USB
Assert that your device is connected, check by running the command fastboot devices on a Command Prompt
Go to the directory you created before and run the file sec_offline_update_image.cmd as administrator
When your device reboot again into bootloader, check if there was no errors (the userdata erase error can be ignored with no problems). If there was any error, I recommend you to go back and check if you done all steps correctly. If not, just use the volume buttons to select the option 'Reboot' and activate it by pressing the Power key
After this is done, you can upgrade to KitKat or Lollipop via recovery, just download the update from Asus site and sideload it via ADB.
Thanks!
Click to expand...
Click to collapse
wait may i give some question your method will go back to jellybean right ? and if you want to go from custom ROM to Stock ROM kitkat or lollipop must via this step right ? ( i'm asking this because my step doesn't use this ........ well quite simpler but hard if you don't understand :silly: and i know it's a little bit late )
RevanEphys said:
wait may i give some question your method will go back to jellybean right ? and if you want to go from custom ROM to Stock ROM kitkat or lollipop must via this step right ? ( i'm asking this because my step doesn't use this ........ well quite simpler but hard if you don't understand :silly: and i know it's a little bit late )
Click to expand...
Click to collapse
This will go back to Jelly Bean. But you can update to kitkat after following this guide.
dgadelha said:
This will go back to Jelly Bean. But you can update to kitkat after following this guide.
Click to expand...
Click to collapse
I was using step from this ( www.windroidica.in/2015/07/how-to-revert-back-to-stock.html?m=1 ) website it shown how to go back to stock rom from custom ROM and it's work for me ( there's a little bit of changes ... i don't know if they fix it yet .... you should install 3.23.40.60 instead of 3.23.40.52 for lollipop ( adb sideload ) , for kitkat just follow the step
RevanEphys said:
I was using step from this ( www.windroidica.in/2015/07/how-to-revert-back-to-stock.html?m=1 ) website it shown how to go back to stock rom from custom ROM and it's work for me ( there's a little bit of changes ... i don't know if they fix it yet .... you should install 3.23.40.60 instead of 3.23.40.52 for lollipop ( adb sideload ) , for kitkat just follow the step
Click to expand...
Click to collapse
Will this fix the random freeze n reboot issue?
Damin81 said:
Will this fix the random freeze n reboot issue?
Click to expand...
Click to collapse
so far i've been back to stock rom twice after done with custom ROM twice too and when i'm at stock ROM nothing happend just like first you buy it maybe like after factory reset
RevanEphys said:
so far i've been back to stock rom twice after done with custom ROM twice too and when i'm at stock ROM nothing happend just like first you buy it maybe like after factory reset
Click to expand...
Click to collapse
Well i reverted from custom rom to stock KK using steps in the tutorial you referred to but my phone still hangs randomly and then reboots
Damin81 said:
Well i reverted from custom rom to stock KK using steps in the tutorial you referred to but my phone still hangs randomly and then reboots
Click to expand...
Click to collapse
Are You Using A500CG , A501CG , A502CG ( This One Less Seen but i know it exist ) or A500KL ? Because Mine A500CG and Never Got Any Random Freeze or Reboot
RevanEphys said:
Are You Using A500CG , A501CG , A502CG ( This One Less Seen but i know it exist ) or A500KL ? Because Mine A500CG and Never Got Any Random Freeze or Reboot
Click to expand...
Click to collapse
Mine is A501CG.So in conclusion is there any fix for my zenfone 5 model?
Damin81 said:
Mine is A501CG.So in conclusion is there any fix for my zenfone 5 model?
Click to expand...
Click to collapse
Oh Wait I think i see What's wrong .... when you relock the bootloader you put
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg.bin
Command Exact Like That Right ?
Because it's for a500cg not a501cg if you want to lock the bootloader you should look for a501cg on the internet , because the website doesn't give the lock bootloader file for a501cg ....sorry
RevanEphys said:
Oh Wait I think i see What's wrong .... when you relock the bootloader you put
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg.bin
Command Exact Like That Right ?
Click to expand...
Click to collapse
Well yes.I get it now i am flashing wrong bootloader files.May be that is the reason why even after going back to stock kk firmware random boots didn't go away
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
RevanEphys said:
Oh Wait I think i see What's wrong .... when you relock the bootloader you put
fastboot flash dnx dnx_fwr_ctp_a500cg.bin
fastboot flash ifwi ifwi_ctp_a500cg.bin
Command Exact Like That Right ?
Because it's for a500cg not a501cg if you want to lock the bootloader you should look for a501cg on the internet , because the website doesn't give the lock bootloader file for a501cg ....sorry
Click to expand...
Click to collapse
Can u find those files for me.I am quite sure i will flash the wrong stuff again?
Damin81 said:
Well yes.I get it now i am flashing wrong bootloader files.May be that is the reason why even after going back to stock kk firmware random boots didn't go away
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
Can u find those files for me.I am quite sure i will flash the wrong stuff again?
Click to expand...
Click to collapse
i'm still searching ...... well you could by using search engine ( Google , Bing and such )
RevanEphys said:
i'm still searching ...... well you could by using search engine ( Google , Bing and such )
Click to expand...
Click to collapse
Well i am doing that but i would really really appreciate some help.
Damin81 said:
Well i am doing that but i would really really appreciate some help.
Click to expand...
Click to collapse
I've Been Searching it's really Hard to Find ( all of them always a500cg ) but you may always asking the website for more because mine a500cg and it's really hard to do it
RevanEphys said:
I've Been Searching it's really Hard to Find ( all of them always a500cg ) but you may always asking the website for more because mine a500cg and it's really hard to do it
Click to expand...
Click to collapse
I am searching too but didn't come across any ac501cg files.It is really frustrating
Related
I messed up my Yoga 2 1050 by trying to load an unlocked boot image from here (http://forum.xda-developers.com/thi...-tab-2-unlocking-daaa-deee-daaa-dooo-t3241260), I have tried using the Phone flash tool with the correct file but it fails at 50%, here is the log attached if anyone can help.
When I first power on a message EFILINK ERROR(image -start-partition 596This partition does not appear to contain a boot image shows up.
Thanks
corasman said:
I messed up my Yoga 2 1050 by trying to load an unlocked boot image from here (http://forum.xda-developers.com/thi...-tab-2-unlocking-daaa-deee-daaa-dooo-t3241260), I have tried using the Phone flash tool with the correct file but it fails at 50%, here is the log attached if anyone can help.
When I first power on a message EFILINK ERROR(image -start-partition 596This partition does not appear to contain a boot image shows up.
Thanks
Click to expand...
Click to collapse
so you got your un-repairable tab back from lenovo
as a reminder, when you attempted to unlock the bootloader instead of the correct fastboot flash ESP 1050f-esp-patched you did a fastboot flash boot 1050f-esp-patched so instead of flashing you ESP partition you flashed the boot one with a (incompatible) ESP image, resulting, of course, in a bricked tab (as now the boot partition contains no valid image to be booted)
as advised, what you did to fix is fine (ie flashing back a stock rom), but you must use this Intel Phone Flash Tool (uninstall your existing one then install the new one) because the one you are using will not complete to flash a lollipop stock rom
Thanks ionioni
I did as you said, removed the old phone flash and installed the "lite" version.
I have run the new one and unfortunately it failed, it seems when the command for 25 second sleep is issued the tablet is taken out of fastboot as the screen shows the android system recovery page then.
I have enclosed the log file.
corasman said:
Thanks ionioni
I did as you said, removed the old phone flash and installed the "lite" version.
I have run the new one and unfortunately it failed, it seems when the command for 25 second sleep is issued the tablet is taken out of fastboot as the screen shows the android system recovery page then.
I have enclosed the log file.
Click to expand...
Click to collapse
when installed the new intel phone tool you must leave the dnx driver checked, install also the other file intelandroiddrv....exe, reboot and try again
if still not working try to flash a kitkat rom (have you restored the bios somehow?)
ionioni said:
when installed the new intel phone tool you must leave the dnx driver checked, install also the other file intelandroiddrv....exe, reboot and try again
if still not working try to flash a kitkat rom (have you restored the bios somehow?)
Click to expand...
Click to collapse
O.K. I'll do as you say
No I have not touched the bios
corasman said:
O.K. I'll do as you say
No I have not touched the bios
Click to expand...
Click to collapse
yeah, i read both logs and you should focus on (re)installing the Phone Flash Tool and drivers (first uninstall the existing and the drivers related and reboot)
ionioni said:
yeah, i read both logs and you should focus on (re)installing the Phone Flash Tool and drivers (first uninstall the existing and the drivers related and reboot)
Click to expand...
Click to collapse
Thank you for your help ionioni, it seems that I have really messed this one up.
I'll try again in the morning and see if I have better luck then.
corasman said:
Thank you for your help ionioni, it seems that I have really messed this one up.
I'll try again in the morning and see if I have better luck then.
Click to expand...
Click to collapse
it's not that hard, come on...
1. uninstall the existing Phone Flash Tool(nvm that you already installed the new one) and the drivers associated from Add/Remove programs and reboot
2. install the new Intel Phone Flash tool and the driver from the zip file linked (unplug the tab from usb before installing), to be sure also install at the end the DnX driver attached (this step is normally not needed as it should be automatically installed when the new Intel Phone Flash tool installation is run)
3. flash using the lollipop stock rom (the one you used so far with (L) at end is ok)
10 minutes for all these operations
I can confirm that information. Today I was installing new rom, and have problem with uploading data. I've installed newer version of Phone Flash Tool LITE instead of classic PFT, and DNx driver and it works good for me
O.K you talked me into it.
Just to be different I tried to do it on my Daughters laptop,and it still failed, it just seems to take it out of fastboot within a second or two of starting.
corasman said:
I tried to do it on my Daughters laptop,and it still failed, it just seems to take it out of fastboot within a second or two of starting.
Click to expand...
Click to collapse
if it fails again, attach the log from the Intel Phone Flash Tool and also detail what is the tab doing during these operations
O.K
I have fresh installed the "lite" tool and all the drivers including the DnX one.
The yoga is put into fastboot by pressing volume up and down together while powering on, this shows fastboot starting,then connect to laptop(tried on two different ones)start "lite" tool and load XML (also tried starting tool before connecting Yoga) file from same folder as files are in, press start to flash and within a second or two the screen on the Yoga change to the Android System Recovery screen and thats how it stays.
The attached log is from my Daughters Laptop.
corasman said:
O.K
I have fresh installed the "lite" tool and all the drivers including the DnX one.
The yoga is put into fastboot by pressing volume up and down together while powering on, this shows fastboot starting,then connect to laptop(tried on two different ones)start "lite" tool and load XML (also tried starting tool before connecting Yoga) file from same folder as files are in, press start to flash and within a second or two the screen on the Yoga change to the Android System Recovery screen and thats how it stays.
The attached log is from my Daughters Laptop.
Click to expand...
Click to collapse
try and start your tab in normal fastboot mode (from the recovery console select 'reboot to bootloader' or use from power off the combo keys Pwr & Vol+ or Pwr & vol- one of these two should bring you to the Fastboot/Droidboot menu) and from there tell me what the ifwi entry says... BLADE_21....
ionioni said:
try and start your tab in normal fastboot mode (from the recovery console select 'reboot to bootloader' or use from power off the combo keys Pwr & Vol+ or Pwr & vol- one of these two should bring you to the Fastboot/Droidboot menu) and from there tell me what the ifwi entry says... BLADE_21....
Click to expand...
Click to collapse
BOOTLOADER VERSION -
IFWI VERSION- Blade_21.86c.004.R23.1504091154 FFD8_IA32_R
SIGNING - ?
SECURE_BOOT - ?
E: No valid installer medium found
corasman said:
BOOTLOADER VERSION -
IFWI VERSION- Blade_21.86c.004.R23.1504091154 FFD8_IA32_R
SIGNING - ?
SECURE_BOOT - ?
E: No valid installer medium found
Click to expand...
Click to collapse
ok, somehow your bios is (still) a kitkat version (sure you didn't restored the bios using the restore bios tool? or lenovo did? nvm anyways)
you need to flash the kitkat stock rom, use this one (you can use the already installed lite flashing tool, no need to reinstall anything, just download and extract the stock rom and flash from dnx mode). after that remember to configure your region code and then you can update to lollipop using OTA's (don't flash the lollipop rom as this is only to be used after you have already updated to lollipop using OTA's and you need a fresh lollipop over your existing one)
ionioni said:
ok, somehow your bios is (still) a kitkat version (sure you didn't restored the bios using the restore bios tool? or lenovo did? nvm anyways)
you need to flash the kitkat stock rom, use this one (you can use the already installed lite flashing tool, no need to reinstall anything, just download and extract the stock rom and flash from dnx mode). after that remember to configure your region code and then you can update to lollipop using OTA's (don't flash the lollipop rom as this is only to be used after you have already updated to lollipop using OTA's and you need a fresh lollipop over your existing one)
Click to expand...
Click to collapse
I will do that, the download seems very slow though at the moment, I'll let you know how it goes.
corasman said:
I will do that, the download seems very slow though at the moment, I'll let you know how it goes.
Click to expand...
Click to collapse
will be fine, you had a kitkat bios and everything choked right from the start (remember that the bios must match the rom you re/install, so for eg if you have kitkat on your tab don't flash a lollipop rom or the other way around, as this will not upgrade/downgrade the bios too and you will get unexpected behavior or bricks, to upgrade to lollipop from kitkat use ota's and after you are on lollipop you can flash a lollipop stock rom if needed sometime)
I now have Droidboot Provision OS
with selection of
Reboot
RebootDroidboot
Recovery
SPupdate
Power off
which do I choose
corasman said:
I now have Droidboot Provision OS
with selection of
Reboot
RebootDroidboot
Recovery
SPupdate
Power off
which do I choose
Click to expand...
Click to collapse
what were the steps you performed? normally that one is the screen that the tab is showing during the flashing yet you must see some activity on the Intel Flash Tool log window and in the bottom of your tab screen. if you see it the it's ok and just wait for it to finish, if not then you must start your tab in DnX mode (screen saying "Fastboot starting...") then load flash.xml from the extracted kitkat stock rom in Intel Phone Flash Tool and "Start flashing"
ionioni said:
what were the steps you performed?
you must start your tab in DnX mode (screen saying "Fastboot starting...") then load flash.xml from the extracted kitkat stock rom in Intel Phone Flash Tool and "Start flashing"
Click to expand...
Click to collapse
Something has worked
I am now at a screen to set the Language and region ,but it will not move on.
I have an Asus zenfone 5 which was bricked and for some reason sideloading from the adb stopped after installing 54% of the firmware so I decided to go for cynogenmod, which was sucessfully flashed. I now want the old stock android back and dont know what to do. If i use ADB again after 54% it will just stop and I tried using TWRP too but it said wrong version and all.
I want to know if i can use ODin to flash my device and if yes then how?. Also in odin im required of an md5 file which i dont know where to get. I have a lollipop firmware and please tell if i need more than that or not.
ODIN is only for Samsung phones.
Follow this guide to go back to Stock: http://forum.xda-developers.com/showpost.php?p=65367132&postcount=2
dgadelha said:
ODIN is only for Samsung phones.
Follow this guide to go back to Stock: http://forum.xda-developers.com/showpost.php?p=65367132&postcount=2
Click to expand...
Click to collapse
Thanks for the info. I haven't checked it how it will go but at the end I still have to sideload my lollipop update right. That it the problem here since adb always stops at as I reach 54% of the installation. Is there any other way to update to lollipop and the end when your guide finishes?
And thank you for replying
zaris47 said:
Thanks for the info. I haven't checked it how it will go but at the end I still have to sideload my lollipop update right. That it the problem here since adb always stops at as I reach 54% of the installation. Is there any other way to update to lollipop and the end when your guide finishes?
And thank you for replying
Click to expand...
Click to collapse
Yes. Just download 3.23.40.60 firmware, extract recovery.img from the firmware .zip, boot to Droidboot, flash the recovery.img, reboot to recovery, then sideload the firmware. That's it.
i have the same problem in a501 cg
dgadelha said:
Yes. Just download 3.23.40.60 firmware, extract recovery.img from the firmware .zip, boot to Droidboot, flash the recovery.img, reboot to recovery, then sideload the firmware. That's it.
Click to expand...
Click to collapse
my installation also stops at 54% and i can't go back to droidboot mode. phone always reboots at recovery mode. what can i do??? please help me.
foysal105 said:
my installation also stops at 54% and i can't go back to droidboot mode. phone always reboots at recovery mode. what can i do??? please help me.
Click to expand...
Click to collapse
I had the same issues but I resolved it
U must have the latest adb tools
U must have recovery image of .52 not .60 (lollipop )
.60 firmware ,
First flash the fastboot from .60 firmware ( It will be droidboot)
Then flash the recovery (.52 recovery )
Reboot into recovery then sideload the .60 firmware ( in case the sideload fails try to relock bootloader then sideload the firmware .)
After that u can manually update to .78 and .87 fimwares respectively . @zaris47 try this as I mentioned and plz google for the files .
i was using .78 and now can't get back to droidboot of .78 (lollipop)
Boomshiva said:
I had the same issues but I resolved it
U must have the latest adb tools
U must have recovery image of .52 not .60 (lollipop )
.60 firmware ,
First flash the fastboot from .60 firmware ( It will be droidboot)
Then flash the recovery (.52 recovery )
Reboot into recovery then sideload the .60 firmware ( in case the sideload fails try to relock bootloader then sideload the firmware .)
After that u can manually update to .78 and .87 fimwares respectively . @zaris47 try this as I mentioned and plz google for the files .
Click to expand...
Click to collapse
as i can't get back to droidboot mode, how can i flash the recovery of .52?? is it possible to flash from recovery mode of .78 ??
Try flashing RAW firmware....its the easiest and safest way to do...
Somewhere around the threads, there is a windows cmd prompt based script created by dgadelha(or tank0412, i forgot ?) which allows u to flash the rom in just a single click......try to search it...I'll post the link if i got that post...
Also,note that RAW fw for A500CG also works for A501CG,but only via this script ,not Asus flash tool apllication(only works for a500cg)...
thanks for the advice, lokking forward for your next post
prathmesh pande said:
Try flashing RAW firmware....its the easiest and safest way to do...
Somewhere around the threads, there is a windows cmd prompt based script created by dgadelha(or tank0412, i forgot ��) which allows u to flash the rom in just a single click......try to search it...I'll post the link if i got that post...
Also,note that RAW fw for A500CG also works for A501CG,but only via this script ,not Asus flash tool apllication(only works for a500cg)...
Click to expand...
Click to collapse
thank u so much. i found the asus flash tools, but can't find the raw file for a501cg. i will now search according to ur advice. if u find the link then please post it asap. thanx in advance.
foysal105 said:
thank u so much. i found the asus flash tools, but can't find the raw file for a501cg. i will now search according to ur advice. if u find the link then please post it asap. thanx in advance.
Click to expand...
Click to collapse
There is no RAW fw specifically for a501cg and aft doesnt work with a501cg...
however , raw firmware for a500cg works for a501cg too.....use this guide http://forum.xda-developers.com/showpost.php?p=65367132&postcount=2
Credits to dgadelha
some changes to be made hin the guide:-
Extract the contents too from the raw file to the same folder and also keep the raw file with it...
try running the command file "NOT" as administrator...
hope it helps
Sorry for the late reply, so i did ask all of you suggested and im stuck at dgadelha.
The adb wasn't taking the sideload even though i flashed the recovery and droidboot.
Recently I unlocked the bootloader on my ZF5 to flash a modded cm 13 ROM, but after that I found out that the camera stopped working. I know somehow it is happening because I unlocked the bootloader incorrectly. I searched many solutions but any of them corrected the problem. When I open any camera app, all I see is a black image. Some one please help me with this. Thx.
The only fix...
Dude, i have that problem too. No custom rom can fix our camera as we have Zen5(A500CG/A501CG) with different hardware models. Most of the zen5 devices work fine after unlocking bootloader but my friend....our cameras won't work if we unlock bootloader. I have tried each and every methods to unlock and each and every custom rom available over the net but no luck. Camera remains black/dark/blank. The only solution is to revert back to stock OS. Start flashing with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip, otherwise the camera won't work in stock too.
If u want to stay on custom rom(as im doing right now, i love CM), then install pixelmaster camera from play store, turn ON flash, set focus to INFINITY.......the camera will be blank but at least it will capture images.
a8962383 said:
Dude, i have that problem too. No custom rom can fix our camera as we have Zen5(A500CG/A501CG) with different hardware models. Most of the zen5 devices works fine after unlocking bootloader but my friend....our cameras won't work if we unlock bootloader. I have tried each and every methods to unlock and each and every custom rom available over the net but no luck. Camera remains black/dark/blank. The only solution is to revert back to stock OS. Start flashing with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip, otherwise the camera won't work in stock too.
If u want to stay on custom rom(as im doing right now, i love CM), then install pixelmaster camera from play store, turn ON flash, set focus to INFINITY.......the camera will be blank but at least it will capture images.
Click to expand...
Click to collapse
Do you know a guide to go back to stock rom and relock the bootloader?
soares7vinicius said:
Do you know a guide to go back to stock rom and relock the bootloader?
Click to expand...
Click to collapse
The proper way to revert back to stock is as below:
1. Download ADB folder and extract: https://drive.google.com/file/d/0B-Fin8UxrD6PUmN6SkVPMXR3UTA/view
2. Download UL-ASUS_T00F-WW-2.21.40.30-user.zip(for WW model only ) and copy to ADB folder: http://dlcdnet.asus.com/pub/ASUS/Ze...ser.zip?_ga=1.182320871.1398112610.1460908265
3. If you have other than WW model, please search and download the UL-ASUS_T00F-WW-2.21.40.30-user.zip here: https://www.asus.com/id/support/Download/39/1/0/2/96nqlxHp1VKV4Rdz/32/
4. Extract the fastboot.img, boot.img, and recovery.img files from the downloaded rom/zip file and copy to ADB folder
5. Reboot your device to bootloader. Turn off device > press volume up+power button together > after asus logo appears, release power but keep vol up pressed > you are in bootloader mode. Go to ADB folder and open command window(CMD) there by pressing shift+right mouse click
6. Run this commands,
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot...
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Now select recovery from the fastboot menu and wait for reboot to recovery
8. In the recovery select wipe/factory reset data, this may take some time
9. Then select wipe cache
10. Then select apply update from ADB
11. Run this command,
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
12. Let it be installed. It will take around 10mins, then reboot system.
13. You will find kitkat is installed.
14. Download UL-ASUS_T00F-WW-2.22.40.54-user.zip, UL-ASUS_T00F-WW-3.24.40.78-user.zip, UL-ASUS_T00F-WW-3.24.40.87-user.zip from this link for your model: https://www.asus.com/id/support/Download/39/1/0/2/96nqlxHp1VKV4Rdz/32/
15. Copy the UL-ASUS_T00F-WW-2.22.40.54-user.zip file into your SDCard/internal storage, then disconnect usb cable. Your phone will detect an update and proceed with the update.
16. Do step 15 for other two files as well. Please follow the sequence of the files, otherwise the update will fail.
17. Enjoy stock lollipop on your zen 5.
Hope it helps.
a8962383 said:
The proper way to revert back to stock is as below:
1. Download ADB folder and extract:
2. Download UL-ASUS_T00F-WW-2.21.40.30-user.zip(for WW model only ) and copy to ADB folder:
3. If you have other than WW model, please search and download the UL-ASUS_T00F-WW-2.21.40.30-user.zip here:
4. Extract the fastboot.img, boot.img, and recovery.img files from the downloaded rom/zip file and copy to ADB folder
5. Reboot your device to bootloader. Turn off device > press volume up+power button together > after asus logo appears, release power but keep vol up pressed > you are in bootloader mode. Go to ADB folder and open command window(CMD) there by pressing shift+right mouse click
6. Run this commands,
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot...
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Now select recovery from the fastboot menu and wait for reboot to recovery
8. In the recovery select wipe/factory reset data, this may take some time
9. Then select wipe cache
10. Then select apply update from ADB
11. Run this command,
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
12. Let it be installed. It will take around 10mins, then reboot system.
13. You will find kitkat is installed.
14. Download UL-ASUS_T00F-WW-2.22.40.54-user.zip, UL-ASUS_T00F-WW-3.24.40.78-user.zip, UL-ASUS_T00F-WW-3.24.40.87-user.zip from this link for your model:
15. Copy the UL-ASUS_T00F-WW-2.22.40.54-user.zip file into your SDCard/internal storage, then disconnect usb cable. Your phone will detect an update and proceed with the update.
16. Do step 15 for other two files as well. Please follow the sequence of the files, otherwise the update will fail.
17. Enjoy stock lollipop on your zen 5.
Hope it helps.
Click to expand...
Click to collapse
Thanks! I'll try it. But after that the bootloader will be relocked?
soares7vinicius said:
Thanks! I'll try it. But after that the bootloader will be relocked?
Click to expand...
Click to collapse
yes, it will be locked.
a8962383 said:
yes, it will be locked.
Click to expand...
Click to collapse
After doing step 6, I can't boot into recovery. What's wrong?
soares7vinicius said:
After doing step 6, I can't boot into recovery. What's wrong?
Click to expand...
Click to collapse
when u reboot into recovery, u will see an android logo with "!" sign. Now, press.......Power + Vol Down + Vol UP sequentially at a time.
a8962383 said:
when u reboot into recovery, u will see an android logo with "!" sign. Now, press.......Power + Vol Down + Vol UP sequentially at a time.
Click to expand...
Click to collapse
Thanks, but I found another problem, when i sideload this package to recovery it shows that i need to upgrade to newest 4.3 image first. What package is that?
Edit: Forget it, it worked! Thanks!
soares7vinicius said:
Thanks, but I found another problem, when i sideload this package to recovery it shows that i need to upgrade to newest 4.3 image first. What package is that?
Click to expand...
Click to collapse
If the firmware flashing is successful, just follow the steps. Don't read or worry about anything in the console. Please follow the firmware up-gradation version as I mentioned, otherwise it will fail.
Btw, did you check the how many cores online with your kernel from kernel adiutor?
If you use hotplug as governor, camera won't start and you need 4 of 4 cores.
soares7vinicius said:
Recently I unlocked the bootloader on my ZF5 to flash a modded cm 13 ROM, but after that I found out that the camera stopped working. I know somehow it is happening because I unlocked the bootloader incorrectly. I searched many solutions but any of them corrected the problem. When I open any camera app, all I see is a black image. Some one please help me with this. Thx.
Click to expand...
Click to collapse
Delete
a8962383 said:
Dude, i have that problem too. No custom rom can fix our camera as we have Zen5(A500CG/A501CG) with different hardware models. Most of the zen5 devices work fine after unlocking bootloader but my friend....our cameras won't work if we unlock bootloader. I have tried each and every methods to unlock and each and every custom rom available over the net but no luck. Camera remains black/dark/blank. The only solution is to revert back to stock OS. Start flashing with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip, otherwise the camera won't work in stock too.
If u want to stay on custom rom(as im doing right now, i love CM), then install pixelmaster camera from play store, turn ON flash, set focus to INFINITY.......the camera will be blank but at least it will capture images.
Click to expand...
Click to collapse
Man, so this is a error on a Drive ?!
So, why the mans can put the Asus camera on the roms, or, can fix this ?
I think this is a driver error and can be solved ?
JulianoJr said:
Man, so this is a error on a Drive ?!
So, why the mans can put the Asus camera on the roms, or, can fix this ?
I think this is a driver error and can be solved ?
Click to expand...
Click to collapse
It's not a driver error. Many developers have already ported Asus Pixelmaster camera with their ROMs and with proper drivers as well. The main problem is, there are few Zen5 devices which use camera api in a different manner like mine. Cyanogenmod source doesn't have it's api calls as per these certain devices needed. As most of the custom ROMs are based on CM, so none of them could make camera working. It's basically a firmware issue which is still unresolved.
So we can't use any roms :c
JulianoJr said:
So we can't use any roms :c
Click to expand...
Click to collapse
lolz.....no bro, we can't. If u really want to use custom ROM, then install Pixelmaster camera and use with this settings:
Go to settings>Resolution to 8MP>focus to infinity>turn on flash>Optimization ON>Anti-shake Auto>Image quality FINE.
This setting will at least capture images but the screen will be black. After taking the first image, u will see the camera screen but with very low light/brightness. It won't help much though. Honestly, I have tried all the custom ROMs over the net.If u want, u can. Good luck.
This thread will be for the Canadian version of ZE552KL, and will be updated with specific info relevant to Z012DC model found in Canada (Canada Computers, Staples, other retailers). It has WW SKU number.
It took me a while and some searching to figure all steps out. I also modified Asus N and M firmware to remove version checks. Without this step - i was stuck with error 7 in TWRP. The only difference between Z012D and Z012DC seems to be in Fastboot and ADB drivers, TWRP recovery, system images seem to work well so far.
Steps:
1. Download Fastboot and ADB Drivers. For me usb driver on ZE552KL Asus download page didn't work. Select "Only install driver", you do not need to update your drivers via DRP.
Fastboot driver (for Vendor VID_18D1&PID_D00D): http://drivers.drp.su/Telephone/Hua...03.00/Huawei-FORCED-Allx64-2.00.03.00-drp.exe
ADB Driver (for VID_18D1&PID_D002): http://drivers.drp.su/Telephone/Leshcat/WinAll/Leshcat-WinAll-drp.exe
2. Save the following files on your External SD Card:
Modified M image UL-ASUS_Z012D-WW-13.20.10.152-user.zip
Modified N image UL-ASUS_Z012D-WW-14.2015.1701.8-user.zip
SuperSU - latest version from here
no-verity-opt-encrypt-5-1.zip. Give thanks to @kaffeine1 , without him - we would all be stuck with black screens
3. Save ADB and Fastboot files on your computer, and extract; give thanks to @snowwolf725
4. Download newer recovery (TWRP 3.1.0) from here
5. Unlock bootloader via unofficial unlock method; give thanks to @snowwolf725
6. Get into fastboot by turning off the phone, and pressing volume up + power. Install recovery that you downloaded in step #4:
Code:
fastboot flash recovery twrp-3.1.0-0-Z012D.img
7. Follow the steps this guide by @kaffeine1 . Skip the steps of downloading Nougat and Marshmallow firmware from Asus site, as you have already downloaded and saved both firmwares in Step #2 . Also skip the last step - do not reboot into Nougat, but go back to fastboot mode.
8. Root Nougat - follow steps under #2 here:
https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
How to update to the latest version of OS:
1. Go to Asus Site, download latest WW image UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip
2. Extract UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip\META-INF\com\google\android\updater_script , edit, remove first two lines, and put back into the zip file (e.g. using 7zip)
3. Extract from above zip file boot.img , and flash it via: fastboot flash boot boot.img
4. Flash recovery: fastboot flash recovery twrp-3.1.0-0-Z012D.img
5. Reboot into recovery, and flash:
- Firmware that you modified in #2
- no-verity-opt-encrypt-5.1.zip
- Latest SuperSU
- Rooted.zip (from step #8 above)
6. Reboot mobile, and enjoy new version!
Phone info as purchased:
Model Number: ASUS_Z012DC
Android version: 6.0.1
Baseband version: M3.10.42-Libra_080001
Build number: MMB29P.WW_Phone-13.20.10.152-20161222
Manufacture date (on the box): January 2017
Latest version - UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip
Model Number: ASUS_Z012DC
Android version: 7.0
Baseband version: M3.10.47-Libra_080001
Build number: NRD90M.WW_Phone-14.2020.1703.28-20170410
Special thanks to:
- @jcadduono for TWRP recovery
- @snowwolf725 for guide unlock bootloader
- @kaffeine1 for guide how to upgrade to N from M
Reserved for future use
can i follow this step for ZE520KL ?
I got my self a canadian vertion ZE552KL, but i can´t seem to fully unlock the boot loader, it goes onto fastboot, but it does not allow me to flash anything it gives a permision denied .
when i tried to flash fw from sdcard gives a error: the the sku is "WW_" and mine is ""
have you came across this problem.
how can it be solved?
thanks
lastremnant said:
can i follow this step for ZE520KL ?
Click to expand...
Click to collapse
no, I do not think so. these are different phones.
DilipRB said:
I got my self a canadian vertion ZE552KL, but i can´t seem to fully unlock the boot loader, it goes onto fastboot, but it does not allow me to flash anything it gives a permision denied .
when i tried to flash fw from sdcard gives a error: the the sku is "WW_" and mine is ""
have you came across this problem.
how can it be solved?
thanks
Click to expand...
Click to collapse
try first flashing 6.0.1 firmware from asus site and then modified 7.0 firmware. if the error is when flashing 6.0 fw - try modified 6.0. and do paste specific rrror.
anterus said:
no, I do not think so. these are different phones.
Click to expand...
Click to collapse
nevermind sir, it worked for me
Strange things do happen!!!
anterus said:
try first flashing 6.0.1 firmware from asus site and then modified 7.0 firmware. if the error is when flashing 6.0 fw - try modified 6.0. and do paste specific rrror.
Click to expand...
Click to collapse
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????
DilipRB said:
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????
Click to expand...
Click to collapse
backup those zips, open with winrar or another app. open meta-inf/android/google/updater-script with notepad++ try deleting from ifelse until ) );
save and let winrar save new update
lastremnant said:
backup those zips, open with winrar or another app. open meta-inf/android/google/updater-script with notepad++ try deleting from ifelse until ) );
save and let winrar save new update
Click to expand...
Click to collapse
Tryed that, and got footer error...
seems that to modifying the script file and then recompresing will change the compretion check algorithem. giving a footer error.
i should try pakaging the apk again...
there was a program to do so but i cant recall which...
thks
DilipRB said:
Tryed that, and got footer error...
seems that to modifying the script file and then recompresing will change the compretion check algorithem. giving a footer error.
i should try pakaging the apk again...
there was a program to do so but i cant recall which...
thks
Click to expand...
Click to collapse
i found it ...
apktool from :
https://forum.xda-developers.com/showthread.php?t=1989533
Sorry this was for apks... but i guess same principle aplies... when i can i shall try and post the outcome
DilipRB said:
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????
Click to expand...
Click to collapse
I noticed that in some cases TWRP doesn't "stick", and gets overridden by default bootloader. Specific check is essentially useless - just to prevent flash of improper image. Just remove the check in the new FW, or use modified FW that has the check removed. I think in your case you can just re-flash TWRP since your bootloader is unlocked?
I tryed several TWRP 3.02 and 3.10 if a boot imge ... if entered bootloader with volum key + power it says all ok but booting never happens... if i enter bootloader trough adb it stucks until i disconnect and reconnect usb cable. when trying to flash. fast boot returns error not have permision and side load error secttion 7 on UL modified or else footer w
error after passing check. i shall try modiffying UL 13.20.10 and see what happens
DilipRB said:
I tryed several TWRP 3.02 and 3.10 if a boot imge ... if entered bootloader with volum key + power it says all ok but booting never happens... if i enter bootloader trough adb it stucks until i disconnect and reconnect usb cable. when trying to flash. fast boot returns error not have permision and side load error secttion 7 on UL modified or else footer w
error after passing check. i shall try modiffying UL 13.20.10 and see what happens
Click to expand...
Click to collapse
flash modified images through twrp - with links in OP
Well my wife liked the phone so much, that she "kindly requested" me to gift it to her... now she is the proud owner of a canadian vertion of ZE552KL and i got myself a ZS570KL
thanks a lot for all your help.
P.D. : i think she was not happy with the time i was spending with the device.
I know this is going to sound super dumb, but the unofficial bootloader unlock still triggers the bootup message and voids the warranty, right?
This might be even dumber... But my guess is that the official app to unlock boot loader, does more than unlock,
My guess is that it also register with asus mobile, the fact that for your device has been unlocked...
DilipRB said:
This might be even dumber... But my guess is that the official app to unlock boot loader, does more than unlock,
My guess is that it also register with asus mobile, the fact that for your device has been unlocked...
Click to expand...
Click to collapse
That's what some manufacturers do, like Motorola and HTC. But from back when I unlocked the BL on my Zenfone 2 Laser, I remember that all it did (as far as I could tell) was unlock the bootloader and set a flag in the bootloader that made it say it was unlocked that couldn't be reversed. No need for fancy registration systems when you can just boot up the phone and take a look.
What was modified in your N-image firmware file? There is now a newer version that I'd like to install. Can you provide an updated modified file for version WW-14.2020.1703.28 or give the steps needed to modify it myself?
Jarrick said:
What was modified in your N-image firmware file? There is now a newer version that I'd like to install. Can you provide an updated modified file for version WW-14.2020.1703.28 or give the steps needed to modify it myself?
Click to expand...
Click to collapse
Updated OP with instructions regarding how to upgrade to the latest version of N - just tested steps myself. Should be applicable to all future versions of N posted on Asus site. Enjoy!
Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked/UnLocked
2. Stock Recovery/TWRP. it works with TWRP, still i suggest you use stock one. Download stock recovery for BND from here
https://mega.nz/#!KixHHCKJ!4hw_lHQGYa_0BJ79lou4m34Fmi23wBctbbvdSCyvCYE
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations
Dr.Anshuman said:
Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked (I've not tried on UnLocked bootloaders)
2. Stock Recovery (I've not tried on TWRP). Download stock recovery for BND from here
https://mega.nz/#!nyY1QRpR!gp5k4nqkQUfktrD2B5Qb1OhhAXmO5Mi2aaMPz8CD8Ts
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations
Click to expand...
Click to collapse
How come you got the stock image of bnd al-10?
Asder.mko said:
How come you got the stock image of bnd al-10?
Click to expand...
Click to collapse
Its Unofficial.
Dr.Anshuman said:
Its Unofficial.
Click to expand...
Click to collapse
That doesn't matter if it works. I'm having unlocked bootloader.
Let me check and confirm whether it works or not on unlocked device.
Dr.Anshuman said:
Hello All, this guide will help to unbrick or back to stock firmware on Indian Variants BND-L22 and BND-AL10C675
Dont try it on other variant otherwise you will fail to install and may loose your IMEI number.
Do it on your own risk. I will not be responsible for any damage to your phone.
I am not a developer so i cant help you much if this update process fails.
PreRequisites :
1. Bootloader Locked/ReLocked (I've not tried on UnLocked bootloaders)
2. Stock Recovery (I've not tried on TWRP). Download stock recovery for BND from here
https://mega.nz/#!nyY1QRpR!gp5k4nqkQUfktrD2B5Qb1OhhAXmO5Mi2aaMPz8CD8Ts
3. SD card (at least 5gb free memory)
Preparations :
1. Backup your data
2. if you are on twrp, just flash Stock recovery via Fastboot or MT
command ' fastboot flash recovery recovery.img '
3. Lock/relock your bootloader ( you may test it on unloacked bootloader)
command ' fastboot oem relock (unlock code) '
4. download this tar. gz file, extract it and Copy 'dload' folder on your SD card, put SD card in your phone
https://mega.nz/#!SuwDUTCJ!iaBnYIbLlMggGId_COuu-xY9pZ2Tec66si5PEcEhovM
This is full Stock Rom not just an OTA update.
5. charge your phone to at least 50%
Steps :
1. switch off your phone and wait for 10 secs
2. press vol.up + vol.down + power keys simultaneously
3. keep keys pressing for few seconds and your phone will boot into automatic update package installer.
4. wait till updating/installing done. If process is stucked at 99%, dont worry just wait for few mins.
5. after updating package done, your phone will boot into stock system. congratulations
Click to expand...
Click to collapse
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion
trixter127 said:
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion
Click to expand...
Click to collapse
hiiiiiiii dear....pls tell me .....this is official indian Rom for honor 7x ..........and does it contains preinstalled gapps.......
trixter127 said:
If you have a twrp already why bother to install drivers and go for ADB you can just flash the recovery.img from twrp .It works too .just a suggestion
Click to expand...
Click to collapse
yes, but when it comes to complete stock, i prefer fastboot commands.
gouravbharat2014 said:
hiiiiiiii dear....pls tell me .....this is official indian Rom for honor 7x ..........and does it contains preinstalled gapps.......
Click to expand...
Click to collapse
this is a complete Firmware including gApps.
Dr.Anshuman said:
yes, but when it comes to complete stock, i prefer fastboot commands.
Click to expand...
Click to collapse
Well, thanks for the post
Dr.Anshuman said:
this is a complete Firmware including gApps.
Click to expand...
Click to collapse
thanks a ton.........
Hi !
It work on BND-L21C432 ?
Thanks !
Thanks
Awesome it worked
saifuddin.slatewala said:
Awesome it worked
Click to expand...
Click to collapse
Model? Ota working?
DaRkLinK_35 said:
Hi !
It work on BND-L21C432 ?
Thanks !
Click to expand...
Click to collapse
This is only for L22 and AL10C675, dont try it on other versions.
Dr.Anshuman said:
This is only for L22 and AL10C675, dont try it on other versions.
Click to expand...
Click to collapse
Ok thanks for you reply !
Username.php said:
Model? Ota working?
Click to expand...
Click to collapse
honor 7x model: BND-AL10
can we use this method to roll back the faceunlock update as its having annoying touch problems? (Indian Version)
Yes it will rollback to earlier version one without face lock
saifuddin.slatewala said:
Yes it will rollback to earlier version one without face lock
Click to expand...
Click to collapse
thanks, do i need to factory reset or just flash this file on top of faceunlock from recovery?
also after this flashing, can we still get OTA updates as normal?
Thank you so much mate. I am back on stock ROM and I did get Oreo ota today just because of you.