Database Users

Working! How to root Tablet Z 10.4.B.0.577 [for UNLOCKED BOOTLOADER only]

Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at: http://download.chainfire.eu/351/
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
[Files uploaded again, change 001.boot.zip to boot.zip.001 and do the same to 002 unzip]

This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot

pangiotis24 said:
This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot
Click to expand...
Click to collapse
For Locked bootloader, the only working method atm is here http://forum.xda-developers.com/showthread.php?t=2588442, the files needed for all XTZ models ( 351,321,311,312) are there now

Unlock/Root/Relock BL
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?

Attached files ?
Xyam said:
Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at:
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
Click to expand...
Click to collapse
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.

Installing SuperSU
Xyam said:
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
.
Click to expand...
Click to collapse
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.

TheRealAlexei said:
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.
Click to expand...
Click to collapse
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?

Vaggelis AsKyE said:
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?
Click to expand...
Click to collapse
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly

TheRealAlexei said:
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly
Click to expand...
Click to collapse
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!

Vaggelis AsKyE said:
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!
Click to expand...
Click to collapse
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data

TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??

TheRealAlexei said:
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.
Click to expand...
Click to collapse
Sorry just realized that XDA did not allow .001 and .002. Please download them again, change 001.boot.zip to boot.zip.001 and do the same to 002 to unzip. Alternatively you can download CM10.2 and extract the boot.img from the zip.

Vaggelis AsKyE said:
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??
Click to expand...
Click to collapse
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"

Vaggelis AsKyE said:
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?
Click to expand...
Click to collapse
i was thinking the same idea. but will only do that if i have a hardware issue and need repair at sony repair center

[/COLOR]
Xyam said:
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"
Click to expand...
Click to collapse
I chose shut down from the menu and the bar is loading. After a while tablet freezes and after 10-15 seconds tablet goes off

ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?

Mr0czny said:
ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?
Click to expand...
Click to collapse
if u flash boot.img with flashtool u will get custom recovery (CWM) installed!!!

Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help

strung3 said:
Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help
Click to expand...
Click to collapse
Hello,
At this guide u flash boot.img from CM10.2 ROM (Step 3). At the end you have to reflash the new firmware so the boot, kernel etc change, because if u stay with CM10.2 u will get bootloops!!

Vaggelis AsKyE said:
If you unlock bootloader you can't use music info download and Bravia engine also. Although, I unlocked my bootloader and I followed your guide rooting successfully my Xperia Tablet Z SGP311 with .577 firmware. I used the latest flashtool to unlock the bootloader!!
When I finished all the process of rooting the music info didn't work so I tried to relock the bootloader with flashtool!! I did and guess what!! I have root with locked bootloader, stock firmware and working music info download!!!
You can make a guide that everyone with his own ftf can root his device just unlocking and locking the bootloader!!
The process must be done strictly with flashtool cause it keeps the keys for the relock!!!
Click to expand...
Click to collapse
Question: if you unlock the bootloader with Sony tools do you loose the music download info and the Bravia engine ????????

Zenfone A501CG Camera not found / Black Screen

Hi guys, do you find other methods to fix this problem? I didn't nothing, just the phone updated itself and camera started to say "not found" with black screen.
I tried to back in stock rom WW-2.21.40.30 (possible fix method), now it don't says nothing but the screen still remains black, when i change to front camera it crashes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Picture is not me, just found in google with same problem.
Asus update did this and i can't send my phone to them, so my camera is gone?

Blak3n said:
Hi guys, do you find other methods to fix this problem? I didn't nothing, just the phone updated itself and camera started to say "not found" with black screen.
I tried to back in stock rom WW-2.21.40.30 (possible fix method), now it don't says nothing but the screen still remains black, when i change to front camera it crashes.
Picture is not me, just found in google with same problem.
Asus update did this and i can't send my phone to them, so my camera is gone?
Click to expand...
Click to collapse
Is your phone rooted?
it's happen to me too, my camera gone blank/missing/not found
for me it's happen after i install TWRP, doesn't matter what TWRP version i install,
but it's can be fix.
drive.google.com/folderview?id=0B5XJj7Sujx-DWmhoY1N4UzNsblE&usp=sharing (its my first time posting so i can't post url copy it to browser)
This is the fix data on my google drive, it's for to use with WW-3.24.40.87
the problem is if you got TWRP installed, after fixing you got your camera back but you lose the TWRP.

Downgrade to KK 2.22.40.54 and follow this, http://forum.xda-developers.com/zenfone-5/general/asus-zenfone-5-root-ww-2-22-40-54-4-4-2-t3128704 or this for non-Linux, https://github.com/sigo/asus-zenfone-5-root/blob/master/README.md#usage-for-other-systems

jephimax said:
Downgrade to KK 2.22.40.54 and follow this, http://forum.xda-developers.com/zenfone-5/general/asus-zenfone-5-root-ww-2-22-40-54-4-4-2-t3128704 or this for non-Linux, https://github.com/sigo/asus-zenfone-5-root/blob/master/README.md#usage-for-other-systems
Click to expand...
Click to collapse
Thanks but i tried and nothing changed

FairuzOnn said:
Is your phone rooted?
it's happen to me too, my camera gone blank/missing/not found
for me it's happen after i install TWRP, doesn't matter what TWRP version i install,
but it's can be fix.
drive.google.com/folderview?id=0B5XJj7Sujx-DWmhoY1N4UzNsblE&usp=sharing (its my first time posting so i can't post url copy it to browser)
This is the fix data on my google drive, it's for to use with WW-3.24.40.87
the problem is if you got TWRP installed, after fixing you got your camera back but you lose the TWRP.
Click to expand...
Click to collapse
Thanks for write your first post to solve my problem
Story of my asus: the phone was working properly, once it fell and the glass broke so I waited for the new glass and when I repaired it, the camera was not working anymore. I tried to reconnect and everything but nothing, the only cause can be an update before or after as has happened to many.
I'll try your method as last chance on software issue because i never flashed in .87, if it doesn't works i'll buy a new camera and lets see. I tried every software fix in the web, maybe it really broke when it fell.

It happens when u unlock ur bootloader
@Blak3n.........I had this issue several times. It's nothing serious and happens when u unlock ur bootloader to flash any custom recovery. This is the only fix if you face the "NO CAMERA" issue for unocking.
Please follow the below instructions:
1. TURN OFF the device
2. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. You must start with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip to get ur camera working. download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
5. extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. then go to recovery by selecting from the menu
8. in the recovery, select wipe data/factory reset
9. select wipe cache partition
10. select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. after successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Reboot ur device. Your camera should work.
14. Now upgrade to lollipop following the version I mention sequentially. Otherwise it will fail. Just copy them to ur SD card and disconnect USB cable. your phone will automatically detect the update. no need to flash anything in fastboot.
>> UL-ASUS_T00F-WW-2.21.40.30-user
>> UL-ASUS_T00F-WW-2.22.40.54-user
>> UL-ASUS_T00F-WW-3.24.40.78-user
>> UL-ASUS_T00F-WW-3.24.40.87-user
15. if it works hit thanks
I did a lot of research on it but no luck. there few Zen5 devices where u can't unlock the bootloader. I'm also a victim. For better understanding: http://forum.xda-developers.com/showpost.php?p=66307220&postcount=16
Good luck.

a8962383 said:
@Blak3n.........I had this issue several times. It's nothing serious and happens when u unlock ur bootloader to flash any custom recovery. This is the only fix if you face the "NO CAMERA" issue for unocking.
Please follow the below instructions:
1. TURN OFF the device
2. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. You must start with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip to get ur camera working. download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
5. extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. then go to recovery by selecting from the menu
8. in the recovery, select wipe data/factory reset
9. select wipe cache partition
10. select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. after successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Reboot ur device. Your camera should work.
14. Now upgrade to lollipop following the version I mention sequentially. Otherwise it will fail. Just copy them to ur SD card and disconnect USB cable. your phone will automatically detect the update. no need to flash anything in fastboot.
>> UL-ASUS_T00F-WW-2.21.40.30-user
>> UL-ASUS_T00F-WW-2.22.40.54-user
>> UL-ASUS_T00F-WW-3.24.40.78-user
>> UL-ASUS_T00F-WW-3.24.40.87-user
15. if it works hit thanks
I did a lot of research on it but no luck. there few Zen5 devices where u can't unlock the bootloader. I'm also a victim. For better understanding: http://forum.xda-developers.com/showpost.php?p=66307220&postcount=16
Good luck.
Click to expand...
Click to collapse
I know, right? Why TF does A**-US need to do s#!t like mess-up the motherboards of every 5th ZenFone 5, WTF. I'm stuck in these suckly stock ROMs while others are enjoying the feature-rich environment of the custom ROM community. Well, done A**-US. If I wanted "unhackable", I'd buy an iPhone.

cnswico said:
I know, right? Why TF does A**-US need to do s#!t like mess-up the motherboards of every 5th ZenFone 5, WTF. I'm stuck in these suckly stock ROMs while others are enjoying the feature-rich environment of the custom ROM community. Well, done A**-US. If I wanted "unhackable", I'd buy an iPhone.
Click to expand...
Click to collapse
You can flash custom rom but can't ensure your camera will be working as before. I have no camera issue but to me, taking snap is less important and I'm using RR rom with the camera bug. I'm fine with that. The camera is black/dark but it captures photos at least.

a8962383 said:
You can flash custom rom but can't ensure your camera will be working as before. I have no camera issue but to me, taking snap is less important and I'm using RR rom with the camera bug. I'm fine with that. The camera is black/dark but it captures photos at least.
Click to expand...
Click to collapse
Naw. mine doesn't lose its camera when the bootloader is unlocked. I'm one of the owners of a ZenFone 5 that freezes/hangs then restarts randomly. Those are the only issues that affect the ZF5 users with their defective motherboards.

cnswico said:
Naw. mine doesn't lose its camera when the bootloader is unlocked. I'm one of the owners of a ZenFone 5 that freezes/hangs then restarts randomly. Those are the only issues that affect the ZF5 users with their defective motherboards.
Click to expand...
Click to collapse
Bro, there are no defects on the motherboard. It's because of the unlocked bootloader. If you want to unlock it properly, then check it out: http://forum.xda-developers.com/showthread.php?t=3389883
Sent from my ASUS_T00F using XDA-Developers mobile app

a8962383 said:
Bro, there are no defects on the motherboard. It's because of the unlocked bootloader. If you want to unlock it properly, then check it out: http://forum.xda-developers.com/showthread.php?t=3389883
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
A'right, mate! I'll give this a shot. I'll notify you via your post regarding the results.

a8962383 said:
Bro, there are no defects on the motherboard. It's because of the unlocked bootloader. If you want to unlock it properly, then check it out: http://forum.xda-developers.com/showthread.php?t=3389883
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Well, still it doesn't work. I've tried every single method regarding that here on XDA. I've even tried those from EDA, Windroidica, and InfoBros. They all don't work.
The only method that managed to make a difference is ozank's automated script. It didn't completely stop the freezes, but I noticed that the reboots are a whole lot less frequent:
NO METHOD/OTHER METHODS - freezes about every 3 minutes. A few seconds when using any app.
ozank's AUTO-SCRIPT - freezes about every 20 - 30 minutes ONLY WHEN USING APPS. Haven't encountered the freezes when the device is on standby or daydream mode.

cnswico said:
Well, still it doesn't work. I've tried every single method regarding that here on XDA. I've even tried those from EDA, Windroidica, and InfoBros. They all don't work.
Click to expand...
Click to collapse
It's been 10days for me. no freeze/reboot so far.

a8962383 said:
It's been 10days for me. no freeze/reboot so far.
Click to expand...
Click to collapse
I'm glad to hear that some have managed to fix it. But as for me, and maybe some others, we'll just have to lay in the dust until a savior picks us up. (no religion, okay? )
Either that, or I'm switching phones.

CM 13.1
Hi.. I flashed CM 13.1 latest stable build on asus Zenfone 5 (T00F). I am facing the same camera issue. Is there any fix for this camera Issue other than Downgrade?Is there any change that can be done to system/framework/bspcapability.jar in order to make it work?
Thanks in advance.

Blak3n said:
Hi guys, do you find other methods to fix this problem? I didn't nothing, just the phone updated itself and camera started to say "not found" with black screen.
I tried to back in stock rom WW-2.21.40.30 (possible fix method), now it don't says nothing but the screen still remains black, when i change to front camera it crashes.
Picture is not me, just found in google with same problem.
Asus update did this and i can't send my phone to them, so my camera is gone?
Click to expand...
Click to collapse
Dear all;
I find a solution for this error..
İf you have only black screen from back camera and th front camera has been stopped error pls read this steps..
1.. download ZenfoneAssist
I cant give you a link for zenfone assist because of the site rules (10 posts). but you can google zenfoneassist. and download from XDA..
2.Run as administrator..
3. RELOCK YoUR BOOTLOADER. wait a little minute while the ifwi and dnx files has been downloading..
4.Program says you what will you do. open droidboot menu and pls wait.
5. phone will restart and you will use your camera immediatly..
For more questions pls write me "[email protected]"
PS: the program is quotation but I tried and worked my camera..
Sorry for my english..

a8962383 said:
@Blak3n.........I had this issue several times. It's nothing serious and happens when u unlock ur bootloader to flash any custom recovery. This is the only fix if you face the "NO CAMERA" issue for unocking.
Please follow the below instructions:
1. TURN OFF the device
2. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. You must start with this version UL-ASUS_T00F-WW-2.21.40.30-user.zip to get ur camera working. download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
5. extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. then go to recovery by selecting from the menu
8. in the recovery, select wipe data/factory reset
9. select wipe cache partition
10. select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. after successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Reboot ur device. Your camera should work.
Click to expand...
Click to collapse
I did this (more specifically "asus-zenfone.com/2015/08/how-to-fix-unfortunetely-camera-not-found-zenfone.html") and returned to stock room UL-ASUS_T00F-WW-2.21.40.30 And the camera still does not work.
Has anyone found any other solution?

niquelfer said:
I did this (more specifically "asus-zenfone.com/2015/08/how-to-fix-unfortunetely-camera-not-found-zenfone.html") and returned to stock room UL-ASUS_T00F-WW-2.21.40.30 And the camera still does not work.
Has anyone found any other solution?
Click to expand...
Click to collapse
The URL you have given, won't work. It didn't work for me as well. Seems like you didn't try my steps but you are quoting me. Would please try/retry the steps again and report it here?

a8962383 said:
The URL you have given, won't work. It didn't work for me as well. Seems like you didn't try my steps but you are quoting me. Would please try/retry the steps again and report it here?
Click to expand...
Click to collapse
Okay, I tried your steps. The problem remains the same.
This time I used the fastboot.img, boot.img, recovery.img files from the room as you suggested in step 5 and not the same files from de url.

niquelfer said:
Okay, I tried your steps. The problem remains the same.
This time I used the fastboot.img, boot.img, recovery.img files from the room as you suggested in step 5 and not the same files from de url.
Click to expand...
Click to collapse
Did you somehow kept your bootloader unlocked? There are few devices (mine as well) where the camera doesn't work if you unlock bootloader. If you port any custom ROM, you have to sacrifice your camera and vice-versa. Please relock the bootloader with a signed boot.img, fastboot.img, and recovery.img.

[Guide] Flash Stock Rom Asus Zenfone 2 ZE551ML

Hey Guys. This guide will help you if
1. If Using Custom Rom and want to revert to latest stock rom.
2. If Stock Rom got corrupted or became laggy.
3. You want to reinstall stock rom.
Warning:
1. Method 1 require unlocked bootloader. If you want to unlock then go Here . Method 2 doesn't. Don't worry.
2. This will clean your phone just like new phone.
3. First read the post twice carefully then proceed.
4. ALL .bat FILES TO BE RUN IN FASTBOOT MODE ONLY, IF YOU DON'T KNOW ABOUT FASTBOOT MODE THEN GOOGLE "HOW TO GET FASTBOOT MODE IN ASUS ZENFONE 2
5. I may change name of files in folder. Use common sense to identify them.
Pre-requisites:
1. Charge your phone atleast 60%.
2. Backup any important data you might not wanna loose to either sd card or usb drive or pc.
3. Copy the rom zip in the sd card of your phone. (The one with size in GB)
4. Android USB Driver should be installed already, if it is not then install all drivers in the "Drivers Folder".
5. Enable USB Debugging.
For that go to "Settings" ,Scroll to bottom goto "about", goto "Software Information", tap "Build number" upto 7 times or till it
says "You are a developer now". Then go to "Settings" you will find "Developer Options", open it and enable "USB Debugging"
4. Common sense, patience.
Download Link:
For Method 1
Click here Android Filehost
Download these folders: TWRP, STOCK RECOVERY, STOCK ROM, DRIVERS
For Method 2
https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966
Procedure:
METHOD 1​Step 1. Flash TWRP recovery if not installed by using "TWRP.bat" (Given in twrp folder) in fastboot mode or bootloader mode whatever you call it.
Step 2. Go to Twrp recovery then choose "wipe" then choose "Advance wipe" and tick everything except "SD card or external sd card". then swipe to wipe.
Step 3. Go to fastboot/bootloader mode and flash stock recovery running appropriate .bat file. It is given in "Stock Recovery" folder.
Step 4. When the command executes from the above step, Go to "recovery" by pressing volume down button, then press "power" button.
Step 5. You will see a dead android logo. Nothing else. Then go to stock recovery options.
If you don't know how then use following methods
Method 1:
When you see a dead android bot with an error press and hold power button, then (while holding power button) quickly press Vol up and release and then release power button..
Method 2:
Go to fastboot mode. Connect your device and open command prompt there. Then Type
Code:
fastboot erase cache
Step 6: You should see stock recovery options. Then choose "Update from sd card" and select the rom zip you pasted in SD card.
(If you don't have sd card, then paste rom in internal memory and don't tick "internal storage" in twrp in step 2) But micro
sd is preferable.
Step 7: Wait. Your phone may take 20-30 or more minutes. So leave it on charging.
METHOD 2​Step 1: Download and Install all drivers given in download folder. Download RAW firmware for your phone. See above in download links.
Step 2: Install "ASUS FLASH TOOL"
Step 3: Go to fastboot/bootloader mode on your phone. Run asus flash tool, select your phone model and browse for the raw firmware. Check wipe all data. And start the process.
Step 4: Wait for program to say successful. If it takes more than 30 minutes. Disconnect your phone and check phone if rom installed or not.
If this process does not work. Then switch methods.
If you have any questions, problems .. Just Comment it.
Every Suggestion welcomed. Also you can join telegram group to get help and help others.
MOD EDIT: LINK REMOVED
If the guide works for you or you want to thank me for development of tools then you can donate me via
Paypal paypal.me/KapilTapsi (You can donate any amount, It will be of great help)
FAQ
1. Having problems with device connection? like waiting for device.
Sol. Make sure you have enabled USB Debugging (Not applicable for BL Unlocking and TWRP Flashing)
Uninstall all drivers previously installed on computer(every driver of any device)
Reboot your computer. And then install all drivers given in the driver folder.
If the problem persists, try different computer and different usb cable.
2. Facing permission denied in fastboot mode or while running script files.
Sol. Try disabling your lock screen security to none.
File Credits:
1. RealYoti

Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Sent from my ASUS_Z00A using Tapatalk

kenbo111 said:
Would it not be easier to get the stock raw image and just flash it with the asus flash tool?
Click to expand...
Click to collapse
Thanks for suggestion. But the reasons​ are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.

Kapil Tapsi said:
Thanks for suggestion. But the reasons​ are
First thing is stock raw image of latest version is very difficult to find.
Second thing sometime asus flash tool stops responding. So you have to wait again for 30 minutes. Also it doesn't show progress sometimes.
Click to expand...
Click to collapse
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk

kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Click to expand...
Click to collapse
It is a guide only. Users are free to choose from where to download. Thats it. I only shared my collection.

E: footer wrong
E: footer wrong
Installation aborted
I need your help!
I follow the instructions in Method 1 but the device give me this error message when I try to update via SD-card...
May I know whats the solution?
Rom used: Fastboot Rom WW-4.21.40.327
Thank you very much!

kenbo111 said:
No offense meant. But the entire collection of raw files are here: https://forum.xda-developers.com/showthread.php?t=3448966
As long as you have the correct drivers (which you need for your process too) the AFT will get the job done in one easy step.
Sent from my ASUS_Z00A using Tapatalk
Click to expand...
Click to collapse
Thanks, finally got it

Hey...when I get to part 6 I get this Error >>
footer is wrong
signature verification failed
installation aborted

Hey..I also Tried Flashing with the method 2 it was installing but i got an error after

Man, this thread saved my ass. thank you for all your time all!

I have the Asus Zenfone 2 ZE551ML with sound issues, (it's only when the phone rings that the speaker works) and I put it into recovery mode to wipe cache/data, but it got stuck while doing that and I forced it off. But now, it's stuck at the Asus Boot logo with the rotating icon underneath.
Please help!!!!

Hello, my 551ml has stock LP, it's rooted with bootloader unlocked and Xposed installed. If I want to install the latest MM with through the raw flashing tool, should I install the MM bootloader first or it is included into the raw file? Thank

just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks

stevegtrlmk said:
just trying to revert back to locked bootloader and stock recovery once I have wiped all data with twrp and go to bootloader how do I actually flash stock rom noob thanks
Click to expand...
Click to collapse
use asus flash tool

damn my asus flash tool says error flashing image failure.... (remote not allowed to flash this partion)
ow btw i already bricked it cause it only does boot fastboot lol no more android
how do i flash it back again i need to send the phone back to amazon by 18/05 lol i mean i can just send it back and say also that it wouldnt boot cause i tried to reset it to get my touchscreen to work but yeah lol dont want them to refuse my retour

No way to simple flash the stock rom through/keeping twrp in the device, like I do with other Custom Roms?

Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?

euphrodil said:
Ok. humm, in AFT, it recognize my phone. (there is no OS on it), i choose the good model, i choose the good firmware, but i got this error in a box
"Can't open file 'SERIALNUMBER_frp_request_server_log.txt' (error 5:denied access)" i can only press OK
and now the button under "state" is red and under description, it's " check the detected serial number failure (not found the device of "SERIALNUMBER") "
you understand the i've replace the real serial number by SERIALNUMBER in those lines.
Anyone ever had this problem?
Click to expand...
Click to collapse
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk

Kapil Tapsi said:
Try manual flashing then. Not the aft flashing
Sent from my MI MAX 2 using Tapatalk
Click to expand...
Click to collapse
Ok thanks, i'll look for a thread that explain this.

euphrodil said:
Ok thanks, i'll look for a thread that explain this.
Click to expand...
Click to collapse
did you find any?
i want to remove the lineageos and install latest stock LP but i have no clue how to do it

[GUIDE] All-In-One noob friendly guide for xperia X (Root/Bootloader/Rom)

[UPDATE]: USE THIS ONLY FOR NOUGAT 7 OR 7.1! THERE IS A DIFFERENT GUIDE FOR ANDROID OREO!
https://forum.xda-developers.com/xperia-x/how-to/root-xperia-x-f5122-android-n-34-2-2-47-t3594502 (Written by YasuHamed, not me!)
If you are not interested in android Oreo, or you want to go back to Nougat, this guide is still valid! [End of Update]
This is a guide for newbies or for people that are simply confused. If you have any questions, you can always ask me, and I will reply. but please make sure you haven't made mistakes and do not ask about things that are already stated here. Let's go!
BEFORE DOING ANYTHING, NOTES
-make sure you have installed ADB : https://forum.xda-developers.com/showthread.php?t=2588979
-make sure ADB can read your phone with the correct drivers installed. If you have trouble with that, read "DRIVERS" section
!It is absolutely necessary to install the drivers correctly!
-Backup your stuff if you have any, you will need to delete everything from the phone
-Enable USB debugging
-Note: some of these instructions apply to Windows OS only!
-Note: links to downloads have been shortcutted as much possible to make it easier for you!
-Find some stock roms here! https://forum.xda-developers.com/xperia-x/how-to/sonyx-f5121-downgrade-8-0-0-to-7-1-1-to-t3754986
(Credit: HEKER510)
-Warning: you will lose your warranty!
-I am not responsible for any damage done to your device.
BACKUP DRM KEYS (OR WORKAROUND)
You may want to unlock your bootloader. If you unlock it without backing up the DRM keys, you will lose them. I did that mistake and I regret it. If you already did, there is an alternative solution, skip to step 8.
1) If you are running android 7 nougat, you will need to downgrade to MM. If you are running MM, skip to step 7.
2) You will need to wipe everything before rolling back, so if you have any data back it up
3) Download any stock MM 6.0.1 firmware for the xperia X. You can find one here : https://mega.nz/#!1xRj2CYS Decryption key: !qBVi7yky8AL84eUF3bpTTGQ2YmN0ePCjc-eSDZGIZCI
Watch out: if you have the dual SIM model, F5122, you need to download accordingly!
For more firmwares, check "BEFORE DOING ANYTHING"
4) Download the latest flashtool: http://www.flashtool.net/downloads.php
Upon installation, tick on fastboot, flashmode drivers! If it didn't ask you, go to the installation folder and run Flashtool-drivers.exe. Please read "DRIVERS" section!
5) Flash the .tft file
How to flash?
0. Go to "C:\Users\[Your PC Name]\.flashTool\firmwares" , and put your firmware .ftf file in there!
1. Open Flashtool and click on the lightning bolt icon (first one from the left)
2. In the prompt, choose flashmode.
3. Under firmware, click on the version you put (It should probably only be one option)
4. Under wipe , tick everything. Under the others, do not make any changes.
5. Click "Flash"
6. When the popup appears, connect your device. It needs to be powered off, and connected while you are holding the
"volume down" button.
7. Wait for it to finish.
8. Done. Boot up the device, it might take some time to open so don't worry.
Click to expand...
Click to collapse
6)If your phone bootloops, try flashing again or a different firmware and make sure you followed the steps correctly.
7) Once your phone successfully boots android MM, use Dirtycow to get your DRM keys out: https://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
8) If you unlocked the bootloader before backing up your keys, you can use DRM kernel fix. You can get it here: https://forum.xda-developers.com/xperia-x/development/kernel-drm-fix-nougat-t3530849 Before using it check out the custom rom that includes this fix and other things.
UNLOCK BOOTLOADER
This is relatively easy and you can follow official sony instructions to do it.
1) Go to your phone settings, developer options, and enable OEM unlock
"But there is no developer options!" -Go to the bottom of your settings, system, about phone, and tap multile times on "Build Number", also at the bottom.
Click to expand...
Click to collapse
2) If you haven't already , install ADB fastboot and configure drivers (Link on top )
3) Follow the steps on the Sony website to get your unlock code: https://developer.sonymobile.com/unlockbootloader/email-verification/
4) After unlocking, a warning message on boot is normal!
INSTALL RECOVERY
Installing TWRP on your xperia X is very important, since you can flash zips and img files so easily, plus wipe, backup and other features.
1) Download the TWRP .img file: https://androidfilehost.com/?w=files&flid=197369 (Credit: eagleeyetom )
2) Make sure you have USB debugging enabled
3) Open your downloaded twrp folder
4) Run CMD in that folder (shift + right click inside the folder, Open CMD here )
5) Connect your Xperia X to your PC
6) Type these lines:
adb reboot bootloader
fastboot flash recovery recovery.img [where recovery.img is your twrp file name]
fastboot reboot
7) If no errors, twrp is now installed. Once your phone boots , turn it off,. To access TWRP recovery hold power button and volume down button until the TWRP menu appears.
STOCK ROM, ROOT
If you just want to root and not interested in additional features and tweaks, you can simply flash SU through TWRP to get your phone rooted.
Note: Current best stock ROM available: 7.1.1 (252) - better features than older ver, and good battery life.
0) Install your desired stock firmware using the exact same previous instructions, (under DRM section) with flashtool.
1) Download SuperSu
Or magisk, using YasuHamed guide mentioned on top, but I have not tested with anything other than Oreo 8.0
Use magisk if you want more stability / root features (like hide root from apps, modules )
2) copy it anywhere on your phone
3) Run TWRP
4) Tap on install
4) Flash the file
5) Reboot, you are now rooted
6) Insert your DRM keys if you have them
Custom ROMS
After unlocking the bootloader and installing TWRP this is the best way to go in order to get full root, tweaks.
https://forum.xda-developers.com/xperia-x/development/rom-xperia-x-pexorom-v1-0-0-f5122-f5121-t3590552
^ This is a very good custom ROM made by prmk74. You can see its features in his thread.
1) Download the rom and copy it to your phone
2) Run TWRP
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
3) Tap install, find your downloaded file and execute
note: It is recommended to wipe dalvik, cache, data ( your storage partition doesn't need to be wiped)
4) Follow on-screen instructions, do not stop the booting after finishing the installation, it will take some time
5) Insert your DRM keys if you have them
6) For those who lost their keys: Now the functions like vivid image mode are working properly.
DRIVERS
For Windows 8/8.1/10 users, how to solve driver problems:
1) Press the Windows key + R together and in the ‘Run’ box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
B) Now you can install the Flashtool drivers. Go to the flashtool install location and run the drivers.exe again, check fastboot and flashmode
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
TO CONCLUDE:
This is what you may want to do to get the most out of your new xperia x:
1) Backup DRM
2) Unlock BL
3) Install TWRP
4) Flash Persian (or a different rom) through TWRP (And subscribe to the thread so you receive updates)
5) Restore DRM
Notes:
None of the links, tools are of my work, I'm just writing a guide for my fellow XX owners

^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users\[user-name]\.flashTool\mydevices

max26292 said:
^^ this guide is so really good :3. I post flash script for someone dont know how to find it ^^
unzip it in this position.
C:\Users[user-name]\.flashTool\mydevices
Click to expand...
Click to collapse
Thanks!

Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.

brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
These USB drivers are very annoying to work with. I got mine to finally work using a program called ADB driver installer. http://adbdriver.com/downloads/ Choose automated installation and try what I said. I believe it should fix your problem, after installing the drivers reboot and flash again.
Other than that, I have to ask are you 1000% sure you used the exact commands?
I saw another thread someone mistook
"flash recovery recovery.img" for "flash recovery.img"
"recovery" should be included before the recovery file name

brianx87 said:
Thanks for this, I need some help!
All was fine until I tried flashing the recovery, comes back "partition unknown" error. I was unable to bring the device up under an adb device only as a fastboot device.
34.0.A.1.264_R3A firmware.
Different official sony driver (Sony bootloader guide driver didn't work)
Device now hangs on the Sony logo after boot messgae warning "OEM bootloader unlocked, device not trusted," any help would be appreciated.
Click to expand...
Click to collapse
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something

the part of restoring DRM is skipped,
please xplain

YasuHamed said:
the part of restoring DRM is skipped,
please xplain
Click to expand...
Click to collapse
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad

FoxTheLegend said:
Why didn't the sony guide work? It worked for me. Just so you know, the "device cant be trusted" message is appearing on everyones' phones after unlocking the bootloader, it's not a problem or something
Click to expand...
Click to collapse
Ok I figured out what I did wrong and was able to amend another issue I edited out of this post.

brianx87 said:
Ok I figured outwhat I did wrong (able to boot into the os and warning message no longer an issue ) and the issue I am now facing is that twrp is hanging on the boot screen. Is this version of twrp built to a specific version of android?
Click to expand...
Click to collapse
What do you mean hanging? the twrp logo frozen?

FoxTheLegend said:
What do you mean hanging? the twrp logo frozen?
Click to expand...
Click to collapse
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.

brianx87 said:
Working now, used a previous version of twrp by mistake. Using latest build works fine now, have to wait to get home from work to proceed with the rest, annoying procedures this stuff but your guide is great.
Click to expand...
Click to collapse
Thanks, Im glad to it works now

FoxTheLegend said:
I know, as I said there is room for improvement. The reason I did not include it is because I never did it myself, so I don't want to write something wrong or something that could lead to problems. I write something only if I am 100% sure. If anyone of you is kind to offer that piece so the guide is complete I will be glad
Click to expand...
Click to collapse
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?

YasuHamed said:
thank you for the answer sir
i am unable to find any twrp that work for my F5122, it always bricks and i have to reset.
is there any twrp recovery image that works correctly with f5122?
Click to expand...
Click to collapse
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you

FoxTheLegend said:
Hmm.. Did you try the one from the poison thread? I myself have still the old version installed (not 3 or 3.1) if I find it on my pc I will share it with you
Click to expand...
Click to collapse
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
Code:
fastboot boot twrp.img
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all

YasuHamed said:
I have to modified kernel
all i want is to boot it via fastboot command
for example i have the rooted kernel SU installed (but battery drain is high) so i what wana do is flashing kernel with all securities OFF and then with twrp image i will do
i will boot the X in to twrp and i will flash SUPERSU via twrp.
thanks all
Click to expand...
Click to collapse
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem

FoxTheLegend said:
I see, but don't you want to figure out why it's not working normally? Noone has reported a similar problem
Click to expand...
Click to collapse
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.

YasuHamed said:
since there is no offcial twrp for X out yes and only DORA (XA) is available) even XA don't work for X
so either twrp 2.8, 3.0 or 3.1 any should just boot in order to let us flash superSU.
Click to expand...
Click to collapse
=-= try to use this command fastboot flash recovery [your_recovery_name].img
I use f5122 and flash successfull twrp 3.0.2 and 3.1. with this, i flash some kernel and rom without any problem.

Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!

brianx87 said:
Everything is working good for me now, the only issue now is restoring the DRM keys, has anyone found a credible source for doing this on this device?
How can I be sure I have a full root? I can't seem to be able to uninstall some of the bloatware only disable it!
Click to expand...
Click to collapse
Well titanium backup can assure you but I don't see why you wouldn't have full root... You need an app uninstaller to uninstall bloatware, it can't be done through the settings you know that right

Unable to Boot TWRP in Recovery mode, bootloop issues

Hello guys, I'm a beginner in this flashing stuff. I have watched youtube over a guy flashing Android 10 on his Samsung note 3. I carefully took his steps and i make sure that my model is compatible with said ROM, Mine is Samsung note 3 lte (N9005), Snapdragon. The issues that i am currently having is on flashing TWRP on my Samsung Note 3, because it won't boot on recovery mode despite i press the exact button as the Video describe, it just boots in recovery and then restarted on the same logo boot repeatedly. I have tried flashing LineAgeOs using the tutorial provided by LineAgeOs team and again, i make sure that the rom is fully compatible and still end up same result. Please help me on this issue. Thank you very much for giving your time reading my problems

Please describe your issue again with more details.

From you're post, it seems as though you are having issues with TWRP. Below I will give you a full tutorial on how to get TWRP up and running for your specific device. Do give this a go, as I have done the research for your specific model, and it should work just fine.
First things first, unlock your devices bootloader. You may not have done this correctly, so if it is possbile to boot into android, then try this:
How to unlock Bootloader on Samsung Galaxy Note 3 | Softstribe
Unlocking bootloader in Samsung Note 3 made easy and you can simply enable developers mode where you can perform OEM unlock.
softstribe.com
If you're bootloader is already unlocked, then proceed.
Now that the bootloader in unlocked, we need to install TWRP for your specific device. Your device is the N9005, which is the international snapdragon model. It's codename is hlte, or hlte*. For TWRP, it is also categorised as the Europe/American model (hltexx).
For flashing TWRP correctly to a samsung device, we will need odin. Odin is a flashing software for samsung devices.
Download Odin.zip from here:
Samsung Odin - Root Android download page for one click root
Samsung odin download - Root android and oneclickroot for flash / install custom ROM with one click root method
odindownload.com
(Download the latest version (v13.4.1 at the time of writing this)
Now, extract Odin.
Once we have Odin downloaded, we will need to install the correct usb drivers for Samsung phones.
Download the file below, then extract the zip and run the installer:
Samsung_USB_Driver_v1.7.31.0
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Now that odin and the drivers are ready, we need the actual twrp image which we need to flash to our device.
Here is the link, download the latest .img.tar file (3.6.1_9-0 at the time of writing):
Download TWRP for hlte
Download TWRP Open Recovery for hlte
dl.twrp.me
Do not download the normal .img file, as that cannot be flashed via odin.
Now that we're past the prerequisites, we need to actually flash twrp to your device. To begin, we must put your note 3 into download mode. To enter download mode, power off your phone completely and then press Power+Home+Vol Down at the same time and keep these three buttons pressed until your phone shows a "download mode, do not power off target!!!" screen, you can follow this video tutorial below:
Now that we are in download mode on the device, we need to get back to our computer and configure odin to flash twrp. First things first, open odin. Now, connect your phone to the computer. You should see a little "COM-" show up in one of the empty boxes in the top row under the word "ID:COM". This is good, it means that your pc successfully recognises your device.
Now, go to the options tab on the left side, makse sure that repartition is UNCHECKED. Now, click on the "AP" button, and navigate to and select the TWRP.img.tar file that you downloaded earlier. After you have selected it, click on start at the bottom right. Now it will begin to flash twrp, which should not take long. Make sure that you do not disconnect the device while flashing, wait for the phone to complete. Once it is done, the phone will reboot.
Now, just remove the battery, then put it back in. To enter TWRP recovery, keep Power+Home+Vol Up pressed, then once you see the samsung boot logo upon the phone powering on, let go of power, but keep home and volume up pressed.
Congrats! You've just flashed TWRP to your device, amazing!
Now you can go and look for custom roms to flash to your device. Since your model is the N9005, look for hlte/hlte* roms, don't use any roms if they don't support the hlte/hlte* variant.

Alright, now since you have mentioned that you want to use lineage os, here's a guide for that too.
So currently, it is recommended to use android 11 lineage os nightly builds as they are stable and official, so they should not have any bugs. So unfortunately, I cannot recommend installing lineage os android 10, as you had originally wanted, though the installation process for that will be somewhat similar. It is still not recommended to use old or unofficial builds due to bugs and lack of security updates.
First, we need to download lineage os for this device onto our pc, here's the link to the latest nightly build:
https://mirrorbits.lineageos.org/full/hlte/20220319/lineage-18.1-20220319-nightly-hlte-signed.zip
Next we need to download a GApps package for google play functionality. OpenGApps is recommended as it is open source, secure and reliable, usually with no bugs. I recommend using the nano package instead of pico if your device can handle it (your's can handle it just fine), as it contains google play functionality, and some extra google features which cannot be downloaded from google play. Here is the link to the nano package for your device (only for android 11 roms):
https://sourceforge.net/projects/opengapps/files/arm/20220215/open_gapps-arm-11.0-nano-20220215.zip/download?use_mirror=udomain&r=&use_mirror=autoselect
Now, if you want to get your device play protect certified, you will also need to download magisk for rooting, and magisk modules (so that you can download netflix and use banking apps etc.), but that is something you can do later on, and you can find any tutorial online for this.
Once the download is complete, move the lineage and opengapps .zip files to an sd card and insert it into the phone. Enter TWRP, go to wipe and click on Advanced. From here, wipe System+Data+Cache+Dalvik/ART Cache. Your files such as photos and media will not be wiped.
Next, go back to the TWRP main menu and select install. Click the select storage button at the bottom left and click on Micro SD Card. Now, click on the lineage os zip file, then click on the Add Zips to Queue button and select the opengapps zip file, then click install. This will take some time, do not interrupt it. Once it is complete, you can reboot the phone. The first reboot will take some time, and the first boot may be slow, after setting up your device, make sure to reboot it at least once.
Congrats, you've just installed a custom rom with google play functionality via TWRP!
Unfortunately, sometimes there are issues. If you still cannot get into lineage os despite waiting at least 10 minutes on the boot screen, then follow these steps below:
The lineage team says that booting issues may be due to incompatible recoveries, this means that we will have to use lineageos's own recovery to flash the rom.
For this, download the lineage os recovery.img from here:
https://mirrorbits.lineageos.org/recovery/hlte/20220319/lineage-18.1-20220319-recovery-hlte.img
Now copy this image file to your sd card and insert it into the phone.
Enter TWRP. First of all, click on wipe, then click on advanced and select System+Data+Cache+Dalvik/ART Cache and wipe. Now, go back to the main menu and click install. At the bottom right or left, there will be a button to "Install Image". Click on that button, and select the lineage recovery zip file and install it. Now go back to the main menu and click on the reboot button, then click on reboot to recovery.
Now you will boot into the lineage os recovery, from here you can install lineage os and the gapps zip files. Here is a tutorial:
This tutorial is for a oneplus phone, but it will be the same process on your samsung device.
Once it is complete, you can restart the device. If you would like TWRP back after flashing, just follow the steps from my first post and use odin to flash the twrp file again. I recommend that after installing lineage os, flash twrp again, as twrp recovery is much better than lineage recovery, and you dont need lineage recovery after installing lineage os.

If I helped you out, please mark my post as the solution, Thanks!

PhotonIce said:
If I helped you out, please mark my post as the solution, Thanks!
Click to expand...
Click to collapse
I did exactly with all your instructions. The end result is still the same that it won't boot TWRP after flashing, I don't really understand what the heck is wrong with my Samsung Note 3 Hlte. However i did try again with Lineageos Recovery, heck same thing too! This is really frustracting man, it just restarted itself and goes into normal boot.

LeEpic69 said:
I did exactly with all your instructions. The end result is still the same that it won't boot TWRP after flashing, I don't really understand what the heck is wrong with my Samsung Note 3 Hlte. However i did try again with Lineageos Recovery, heck same thing too! This is really frustracting man, it just restarted itself and goes into normal boot.
Click to expand...
Click to collapse
Did you follow my instructions from the beginning, using the files I linked, instead of your own?
How did you even try lineage recovery if you can't boot into TWRP? You need to boot into TWRP to flash lineage recovery..
HECK, how did you even flash lineage os if you can't boot into twrp???
Please answer these questions, as it is literally impossbile to do what your doing without entering twrp.
Just follow my instructions step by step, using only the files I linked, then tell us what happens.
I think your problem is that you aren't even entering recovery mode. You need to keep Power+Home+Volume Up pressed, then once the samsung logo appears, wait for 2 seconds and let go of power, without letting go of home or volume up. Now keep home and volume up pressed, eventually you will boot into twrp.
If you can't get into twrp, it means that you didn't flash it correctly, in which case make sure that your bootloader is unlocked.
It is also possible that your devices buttons or broken or something, in that case, download platform tools from here:
https://magiskupdate.com/wp-content/uploads/2021/12/platform-tools_r31.0.3-windows.zip/
Next, download and install adb and fastboot drivers from here:
Download in progress... - My USB Drivers
Preparing your download... Please wait...! Facing issues downloading the file or the download link is broken? You can report us here.
myusbdrivers.com
Install the drivers, then reboot. After that, extract platform tools and open the folder. Note the location of the folder (e.g. C:\Users\Name\Downloads\platform-tools). Now open a command prompt window (cmd), then type:
cd location of platform tools folder here
e.g.
cd C:\Users\Name\Downloads\platform-tools
Now, boot your phone into download mode (power+home+vol down), then connect it to the pc. Type:
adb reboot recovery
and
fastboot reboot recovery
This will force your device to boot into recovery, if your device still doesn't boot into twrp, then you have incorrectly flashed twrp to your device. If that's the case, please carefully follow my instructions from the first post, using my linked files only.

PhotonIce said:
Did you follow my instructions from the beginning, using the files I linked, instead of your own?
How did you even try lineage recovery if you can't boot into TWRP? You need to boot into TWRP to flash lineage recovery..
HECK, how did you even flash lineage os if you can't boot into twrp???
Please answer these questions, as it is literally impossbile to do what your doing without entering twrp.
Just follow my instructions step by step, using only the files I linked, then tell us what happens.
I think your problem is that you aren't even entering recovery mode. You need to keep Power+Home+Volume Up pressed, then once the samsung logo appears, wait for 2 seconds and let go of power, without letting go of home or volume up. Now keep home and volume up pressed, eventually you will boot into twrp.
If you can't get into twrp, it means that you didn't flash it correctly, in which case make sure that your bootloader is unlocked.
It is also possible that your devices buttons or broken or something, in that case, download platform tools from here:
https://magiskupdate.com/wp-content/uploads/2021/12/platform-tools_r31.0.3-windows.zip/
Next, download and install adb and fastboot drivers from here:
Download in progress... - My USB Drivers
Preparing your download... Please wait...! Facing issues downloading the file or the download link is broken? You can report us here.
myusbdrivers.com
Install the drivers, then reboot. After that, extract platform tools and open the folder. Note the location of the folder (e.g. C:\Users\Name\Downloads\platform-tools). Now open a command prompt window (cmd), then type:
cd location of platform tools folder here
e.g.
cd C:\Users\Name\Downloads\platform-tools
Now, boot your phone into download mode (power+home+vol down), then connect it to the pc. Type:
adb reboot recovery
and
fastboot reboot recovery
This will force your device to boot into recovery, if your device still doesn't boot into twrp, then you have incorrectly flashed twrp to your device. If that's the case, please carefully follow my instructions from the first post, using my linked files only.
Click to expand...
Click to collapse
I did follow your instructions using your own files that you provided for me. I did press Power + Home + volume up exactly as you told me to and let go of power button and keep pressing Volume up and Home, It just won't boot correctly into Twrp and restarted itself. There is alternative than using TWRP which is Lineageos Recovery os, i flashed that on my Samsung Note 3 HLTE, but it also don't work as well. However the link you sent to me right now is broken. Mind sending new one?

i forgot to mention one thing, i already unlocked the bootloader on Devs setting by turning on USB Debugging. There is no saying about bootloader option. I'm 100% sure i am doing it correctly. I downloaded literally everything from you and did as the instruction told. Even when i keep pressing Home + Volume up, it goes into bootloop without any successful attempt into booting twrp correctly and once i let go of Home + volume up button will boot my Samsung note 3 hlte into Normal boot and work as normal.

there should be an oem unlocking option in developer options. you need to select that, then reboot into downlaod mode and confirm to unlock your bootloader. To check it if it is unlocked, boot into download mode and send a picture of the text which it shows at the top right here on this forum and ill be able to confirm it for you.

N9005 does not have a locked bootloader .
Check its actually a N9005

PhotonIce said:
there should be an oem unlocking option in developer options. you need to select that, then reboot into downlaod mode and confirm to unlock your bootloader. To check it if it is unlocked, boot into download mode and send a picture of the text which it shows at the top right here on this forum and ill be able to confirm it for you.
Click to expand...
Click to collapse
You can see the video for the devs option, there is only usb debugging, i turn it off so that you can notice it and turn it back on in the video. You can try look at the download mode picture too. Let me know if i am doing anything wrong. Anyways the SDK Platform tool link you sent me is broken bro, i haven't try that solution yet.

JJEgan said:
N9005 does not have a locked bootloader .
Check its actually a N9005
Click to expand...
Click to collapse
It is N9005 my bro, I checked the spec with CPUZ and also reFlashed with Stock ROM N9005 with same Country region just for sure and it works fine. After i flash the stock rom, it can boot into recovery mode with no issues. However, with TWRP... It just won't work... I don't know why...

Will an older TWRP 2.8.70 etc flash , it could then upgrade TWRP .

JJEgan said:
Will an older TWRP 2.8.70 etc flash , it could then upgrade TWRP .
Click to expand...
Click to collapse
I'll try flashing Old twrp version and soon update about it.

Okay. it seem to be work out. But i realised that my Samsung note 3 hlte lcd screen is not original... So is this the reason why i can't flash custom rom? Or is there any alternative that may help me flash any good custom rom other than stock?

LeEpic69 said:
Okay. it seem to be work out. But i realised that my Samsung note 3 hlte lcd screen is not original... So is this the reason why i can't flash custom rom? Or is there any alternative that may help me flash any good custom rom other than stock?
Click to expand...
Click to collapse
Changed parts doesnt affect the installation of a custom rom. What issue are you encountering, you said that it worked out..? Just use twrp to wipe system+data+cache+dalvik, then flash acustom rom which is compatible with the hlte

PhotonIce said:
Changed parts doesnt affect the installation of a custom rom. What issue are you encountering, you said that it worked out..? Just use twrp to wipe system+data+cache+dalvik, then flash acustom rom which is compatible with the hlte
Click to expand...
Click to collapse
Twrp 2.8.70 is too old to read modern custom rom, it seem that i can't flash Lineageos 18.1 at all. That's what i mean, although Android 7.1 Lineageos seem to work out on my samsung note 3 hlte

flash 2.8.70, then install a 3.3x image via twrp's "install image" option in the install menu