Related
Hey,
I've tried to flash my lg g2 d802 with CM 11 with TWRP recovery
after 5 minutes is says : "fail"
I selected reboot system the phone stuck on the lg logo and the phone won't boot
then I've wipe everything
tried to boot the phone the phone won't boot
then i read a thread on XDA : http://forum.xda-developers.com/showthread.php?t=2451696
via "terminal command" method and the phone won't boot
then I booted the phone into download mode and downloaded kdz file then i tried to use the flash-tool and I have the "lg drivers" and also "lg-mobile support tool"
then the flash-tool is not responding :/
so what i can do ?
and should I wait for kitkat official update or flash rom ?
and if I want to flash rom which one is better for lg g2 d802 ?
Well did you make a backup b4 you tried flashing the rom to restore it if anything were 2 go wrong ? Its most likely it flashed partially but it wiped your original rom thats why u couldnt boot . if you can still boot into recovery mode try flashing a diffrent rom if you have any downloaded
Hellfire and liquidsmooth are best 4.4 roms...
Try installing these roms..
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
collller said:
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
Click to expand...
Click to collapse
First double check that you can enter recovery. Hold the power button until the phone completely shuts down. Wait 5 seconds. Then hold power + volume down until it vibrates and LG logo shows up. Release both buttons. Then press them again quickly and hold them. You will enter recovery. Or the phone my offer to do a factory reset which btw won't happen since it will go to recovery by pressing the power button 2 more times. If you have TWRP then you are good. Install ADB on your PC and the LG drivers. When you have ADB, Download (check everything) related to JB and KK. Reboot the PC. Connect your phone with the cable. The PC will not recognize the phone. You have to use a little trick in the device manager first:
Press the windows key + pause/break and click on device manager. Right click on the faulty device with the yellow exclamation mark and hit properties then update driver. Click on the second option then from the list search for ADB or ADB device or something along those lines. Select the LG driver and hit OK. Unplug the phone. The phone must be in recovery still. Inside recovery hit advanced and look for ADB sideload. Check both checkboxes on what to wipe. If you don't already have a rom you want to flash, then use this one. It is a very stable and fast one and I only recommend it because I had the same issue as you and it worked for me. Download that rom and rename the zip file to rom.zip and copy it to the location where your adb.exe file is. You will also need the KK baseband modem otherwise auto rotation won't work. Search for it on the D802 dev thread. Now on your PC, open a command prompt inside the directory you copied the rom.zip (shift + right click) and hit "open command prompt here". Type in:
adb devices (this will ensure that your connection with the phone is alive. If you see some weird string then it works. That is the name of the phone btw)
adb sideload rom.zip
Click to expand...
Click to collapse
Installation will now begin. You are saved.
Of course all the above only applies if you have acces to recovery. But I wonder how could you screw that one up. It's literally a simple apk installation and a 1 button solves everything app. If you don't have recovery you can still try to save your phone with download mode. Here is a link that maybe helps but I havent tested it
And one last thing: Don't use Flashtool.
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
collller said:
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
Click to expand...
Click to collapse
I have the same problem as you, my PC don't recognize the phone.
try resetting it with combo keys
Guys plz help
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Same problem here only download mode is working and it gives error when I am trying to install tot LAF retrieveGPT() Failed. is there any solution for it?
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
raptorddd said:
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
Click to expand...
Click to collapse
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
devil ££ sama said:
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
Click to expand...
Click to collapse
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
devil ££ sama said:
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
Click to expand...
Click to collapse
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
raptorddd said:
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
Click to expand...
Click to collapse
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
devil ££ sama said:
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
Click to expand...
Click to collapse
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
raptorddd said:
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
Click to expand...
Click to collapse
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
devil ££ sama said:
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
Click to expand...
Click to collapse
post your question here explan in detail all you did and where are you now , i hope you get help here.. then when fix post back with the fix.
http://forum.xda-developers.com/showthread.php?t=2432476
huzaifaas said:
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Click to expand...
Click to collapse
Have the same issue on D802 G2 here. How'd you solve it?
hi guys , i have f320k , i got the lolipop kdz for my device but the flash tool 2014 wont work , lg flash tool detetcts the phone in download mode , i tried many things but it just wont work , the flash tool says ''connection to server failed , try in a moment'' or it stucks at 2% and fails , please give me a solutution? or if theres any method by which i can convert kdz into .tot please?
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
diegz said:
Hello, today i tried to flash from recovery this lollipop zip: http://forum.xda-developers.com/lg-g2/development-d802/rom-stock-30d-flashable-zip-t3070383 and flashed immediately TWRP also.
Now when i boot up the device I get a critical demigod error screen from which I can enter Download mode.
So i tried to install v30a .kdzwith flashtool but the installation fails...
Any suggestions? D:
I can only get to download mode, the phone is correctly recognized from the pc and LG Mobile Support Tools sees the device but with SW OPTIMUSG3 1.4.1 (the rom i had when I flashed Lollipop)!
Click to expand...
Click to collapse
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
OverClockeD_GR said:
tried lg flash tool? what error you get it stops 2%?
can you reboot recovery with keys or some kind of adb reboot recovery?
Click to expand...
Click to collapse
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
diegz said:
Thanks for the reply!
It stops at 2% and i get the error in the image.
I tried with 30a, 20h and 20f :/
It's a pain mainly because it's my only phone!
Click to expand...
Click to collapse
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
OverClockeD_GR said:
ye i had this problem when tried to kdz from optimusg3...cause phone recognized not as d802 i think.. i flashed a stock rom zip format throught recovery and after i was able to flash kdz..
can you try this
http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
if you enter recovery mode somehow then its easy just flash a stock rom
or just flash a rom with tot methode
Click to expand...
Click to collapse
I can only go to download mode and the adb seems to not recognize the device from there
diegz said:
I can only go to download mode and the adb seems to not recognize the device from there
Click to expand...
Click to collapse
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
casual_kikoo said:
As said above, you should try .tot method; I was like you, .kdz didn"t work, but .tot method works perfectly. You'll be on 4.2.2, 'cause .tot method only support 4.2.2 version of android on D802, but you can upgrade after with .zip rom or re-try .kdz method.
Check second part of this tutorial : http://forum.xda-developers.com/showthread.php?t=2432476 ( "2015 (updated with pictures) TOT method" ).
Yeah, final thing: if, after .tot method you're stuck in bootloop, factory reset your phone (power off, then volum down + power key, wait for LG logo, release buttons, then volum down + power key again, and your phone should work like a charm). Let us know if it work!
Click to expand...
Click to collapse
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
diegz said:
Trying the tot method...
But can't even do the factory reset cause as soon as the LG logo appears I get the critical error!
Click to expand...
Click to collapse
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
OverClockeD_GR said:
do tot methot and it wil work follow this instructions get the tot files and the right dll i copy paste from a guy that had optimus and worked like this on him
"My problem was the infamous 2% bug with the KDZ. I think reason for this is the wrong device ID set in the 'build.prop' by the G3 rom for the G2. The flash tool expects a G2 but sees a G3.
I did not find a workaround for this BUT there is one for the TOT method. You will need:
- LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.1 2.3.exe (version does not matter)
- Setup_LGFlashTool_1.8.1.1023.exe - for flashing of a TOT
- LGUP_8974.dll - this is needed for the flash tool to accept all TOTs
- the right TOT for your device
Please google these, I just checked and found them all. You can also find instructions for them.
Install drivers and LGFlashTool then start it.
Start smartphone in download mode by holding the volume up key while plugging USB in PC. Phone must be off.
Wait for the device recognition then change COM port of the new device in Windows device manager to something between 41-56 so that the flash tool can find the phone. In the model config window of the flash tool select the 'manual mode' then enter the path to the downloaded LGUP_8974.dll in 'DLL' and the path to your TOT file in 'S/W'. Set 'Action mode' to 'BOARD DL' then press 'OK'.
Your phone should be shown on selected COM port. Now you can press Start (the arrow).
Click to expand...
Click to collapse
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
diegz said:
Ok downloaded all the files except the .tot. I found THIS but they are .exe :/ should i change the file type once downloaded? (I'm downloading v10a)
Thanks for the help guys!
Click to expand...
Click to collapse
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
casual_kikoo said:
No, do not rename file; it's .exe BUT when you'll double-click on it, it gonna launch winrar automatically; I was "scared" too, but it works pretty good don't worry. (Sorry I'm late, but I'm french, and there is jetlag between you and me...)
Click to expand...
Click to collapse
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
diegz said:
Ok guys! The TOT method worked Then I flashed v30a kdz and it works perfectly!
As you said the problem was that flashtool didn't recognise the G2 (probably it saw it as G3) so it keeps stopping at 2%.
Thank you all for the help :highfive:
Ps no jetlag I'm from Italy ;p
Click to expand...
Click to collapse
My mistake ! Happy for you!
@diegz, what variant of LG G2 do you have? International? I'm planning to flash the 30A 32gb Italy variant on my G2 international. Just want a quick reference before I flash. Sorry for the OT.
@happiness4u i'm on 16gb D802! It's a great update if you ask me
diegz said:
@happiness4u i'm on 16gb D802! It's a great update if you ask me
Click to expand...
Click to collapse
Thanks for the heads up. Gonna try this out in a moment. +1 added.
I have a new and unique problem with my set Ls980 (LG G2). I dig down all xda and other forums from last week. But no use till now. So i need some good help from experts . Ok here is the situation . I have Lg g2 ls980 (sprint) i rooted it to flash some LP custom rom in it. i installed RECURRECTION REMIX LOLLIPOP ROM in it successfully along with it's gapps. After reboot i got my phone in boot loop. now the current situation is that
1- I have nothing on my phone everything wiped out. no rom backup or anything else on my phone memory.
2- I have stock recovery (pictures attached).
3- I have broken download mode. ( so i can't attach my phone to lg flash tool) picture attached.
4- I am stuck on boot loop with cm11 M5 ( last rom installed using adb sideload option from stock rom)
5- No fastboot mode.
Please guide me to recover my soft bricked phone.
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
ceza1380 said:
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
Click to expand...
Click to collapse
How can i try tot method without going to download mode ? as i said phone only have stock recovery , Yes there is an option in stock recovery "Apply update from ADB" by selecting that i can run adb sideload commands. And i can flash any zip rom from that option . I tried several rom's using this option but installation aborted in middle .
Does device manager in Windows recognize your device? In Tot method you do port settings to flash kdz. Also you can give it a try for LG pc suite.