Related
My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk
Looks like a Dev ROM to me. Your bootloader is unlocked?
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone
caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.
Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Write you soon. PC crashed
I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"
HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts
goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore
http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406
Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.
Okay, so :- :crying::crying::crying::crying:
I was on nougat and went to downgrade and followed ALL instruction apart from one - which was something I missed with translate until i visited the htc page for the tenth time trying to fix this.
:silly: :crying: ----- I didnt change default location whilst running nougat -----:silly: :crying:
I flashed the c432 oem file, and I have tried to update to b151, b150 and b161 all through the update.app method. to no avail.
I have tried flashing everything manually through adb pushing AND fastboot after using the extractor and everything works EXCEPT the system.img. I am faced with an error telling me it has failed, 'unable to mount /system' - - - This message comes through regardless of what I do and im panicking
PLEASE HELP I AM SO STUCK
thank you in advance for any suppport
What P9 lite you have?
Johnny TDN said:
What P9 lite you have?
Click to expand...
Click to collapse
I have the vns-L31 however ive just opened dc unlocker and its showing my model as 21
i can access fastboot and rescue mode as well as twrp although when flashing im faced with the /system error
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Chisetdel31260 said:
It is written, on htcmania, using c432oeminfo and b130.
so,
Code bootloader
Twrp meticulus.
Install c432oeminfo.zip, power off
Restart dload c432b130.
Click to expand...
Click to collapse
i will try that, although ill get errors when flashing the zip - not only that but I cant get to meticulus once its flashed - possibly the system error?
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
what do you mean when you say code bootloader? what should i do there? anything im missing?
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
Yes, I noticed that from time to time, in bootloader mode, it is written unlocked, but as the device bootloop (bug) I believe it too. so
I retype systematically the bootloader code to open.
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
If you have your bootloader unlocked (if you don,t have it, unlock it) and flash TWRP. After that, flash B130 for your VNS-L31. Done.
Unlock yor Bootloader again. And try flashing again.
Have hade the same problem. My bootloader showed unlocked, but he was not.
Ron
raihanbam said:
what do you mean when you say code bootloader? what should i do there? anything im missing?
Click to expand...
Click to collapse
i have followed all of these and notw its stuck on your device is booting.....
i flashed the rom with recovery so now ill try the dload method again, i assume ill have to flash the second zip with recovery?
Chisetdel31260 said:
Restart, bootloader code,
Twrp Meticulous, went a wipe, xxxx everything except external storage, installs c432oeminfo.zip, dload c432b130.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
raihanbam said:
i am now stuck with your device is booting - cant access fastboot or recovery at all - doesnt show up in adb or fastboot either
Click to expand...
Click to collapse
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
no matter what I do I'm stuck with the device is booting screen I even let the battery drain to try that way-I'm so screwed
RonPo said:
Shut down your device. Press the switch off for 10 secounds.
When the phone is off, swith on and same time with vol + without usb-kabel, and otherwise try it with usb-kabel.
When you stock recovery starts. You can try a factoryreset.
When you Revolution recovery starts flash oem.info again and perform the dload methode with your right MM UPDATE.APP.
Ron
Click to expand...
Click to collapse
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
raihanbam said:
okay so I got to the erecovery screen, it only gives the option to dl the latest version and fails along with reboot and shutdown - no wipe
Click to expand...
Click to collapse
OK. Go to bootloader and flash:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
extract this files with: Huawei Update Extractor from your Original UPDATE.APP
system.img is loading in steps and need much time.
Ron
Hi guys, i have the same problem after doing some ****, flashed stock rom from lineageos 14 and a lot of things that i'm trying now to unbrick my phone... i cant enter to the erecovery with the 3 buttons method, wathever i do, and i dont have any idea on how to unbrick my phone... I hope someone could help me
i upgraded my p9 lite to nougat via unofficial method using firmware finder app and when it finshed i found many apps not exist anymore
and the build number bwcame nrd 90m test-keys
now i want to back to marshmallow but i can not i tried every possiple method but i still cant
i unlocked the boatloader but cannt install twrp
can anyone help me please
Did you try the revolution twrp for nougat? You should flash that one, install the oemfile and dload a marshmallow file, after that go into recovery and hard reset your phone. This should get you back to marshmallow.
Or not to go down to MM. If you are always in nougat, But installs HWdataFull that suits you.
Install recoverynougat b9, MOUNT data, install HwDataFull, reboot bootloader, install recovery stock nougat. Reboot recovery and factory rest. Reboot.
Kodalinium said:
Did you try the revolution twrp for nougat? You should flash that one, install the oemfile and dload a marshmallow file, after that go into recovery and hard reset your phone. This should get you back to marshmallow.
Click to expand...
Click to collapse
thanks for reply but i cant install the revolution twrp for nougat when i instsll it it says remote: command not allowed
Chisetdel31260 said:
Or not to go down to MM. If you are always in nougat, But installs HWdataFull that suits you.
Install recoverynougat b9, MOUNT data, install HwDataFull, reboot bootloader, install recovery stock nougat. Reboot recovery and factory rest. Reboot.
Click to expand...
Click to collapse
i cant install the recovery this is the problem
anamedo7mdy said:
i cant install the recovery this is the problem
Click to expand...
Click to collapse
What recovery twrp installed you?
What version vns-Lxxcxxxbxxx have you?
Which nougat version you installed cxxxB33X?
Have you still nougat installed?
Chisetdel31260 said:
What recovery twrp installed you?
What version vns-Lxxcxxxbxxx have you?
Which nougat version you installed cxxxB33X?
Have you still nougat installed?
Click to expand...
Click to collapse
the recovery i tryed is Revolution Recovery Android Nougat {15-12-16} Beta .9
vns-l31
build number:nrd 90m test-keys
nougat version i installed was c02bxxx it was via ota
i still nougat instslled and want to roll back to marshmallow or install another complete nougat
anamedo7mdy said:
the recovery i tryed is Revolution Recovery Android Nougat {15-12-16} Beta .9
vns-l31
build number:nrd 90m test-keys
nougat version i installed was c02bxxx it was via ota
i still nougat instslled and want to roll back to marshmallow or install another complete nougat
Click to expand...
Click to collapse
How did you install OTA ?
You have installed L31c02b327, with firmware finder.
Fastboot works?
Kcetin20 said:
How did you install OTA ?
Click to expand...
Click to collapse
i used app called firmware finder and i changed the proxy in the network to local host and the port to 8080 then the app send the update to ota and i download it and run it
Chisetdel31260 said:
You have installed L31c02b327, with firmware finder.
Fastboot works?
Click to expand...
Click to collapse
yes it works
anamedo7mdy said:
yes it works
Click to expand...
Click to collapse
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.
Chisetdel31260 said:
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.[/QUOT]
cant enable oem unlocking
Click to expand...
Click to collapse
Chisetdel31260 said:
Your phone starts on nougat, go to setup, allow debugging usb, and verify that unlocking oem is enabled.
Lite adb and fastboot to pc and write fastboot flash recovery recovery.img
Connected to the usb cable.
Hisuite will start, do not close it, reduce it.
On phone supported volume - and power, it will go to fastboot mode.
To the pc click ok. Do not fastboot reboot.
Unplugged the cable and pressed volume + and power, the Huawei logo does not lose volume + only power as you lose it.
Click to expand...
Click to collapse
cant enable oem unlock
https://forum.xda-developers.com/attachment.php?attachmentid=4041632&stc=1&d=1487113827
ROLLBACK
Chisetdel31260 said:
You can not go a option developers?
Do you have the bootloader code?
Click to expand...
Click to collapse
i can go developer options but cannot enable oem
yes i have the code
https://forum.xda-developers.com/attachment.php?attachmentid=4041635&stc=1&d=1487114260
anamedo7mdy said:
i can go developer options but cannot enable oem
yes i have the code
https://forum.xda-developers.com/attachment.php?attachmentid=4041635&stc=1&d=1487114260
Click to expand...
Click to collapse
http://m.huawei.com/frmobile/consumer/support/downloads/index.htm
ROOLBACK VNS-l31 Dload
http://download-c.huawei.com/download/downloadCenter?downloadId=93786&version=373420&siteCode=fr
and
dload firmware full c432b160
loock l31c02 no full firmware just ota http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=vns-l31c02&firmware_page=0
Chisetdel31260 said:
http://m.huawei.com/frmobile/consumer/support/downloads/index.htm
ROOLBACK VNS-l31 Dload
http://download-c.huawei.com/download/downloadCenter?downloadId=93786&version=373420&siteCode=fr
and
dload firmware full c432b160
loock l31c02 no full firmware just ota http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=vns-l31c02&firmware_page=0
Click to expand...
Click to collapse
when i roolback it stuck on 5% and cant complete
anamedo7mdy said:
i used app called firmware finder and i changed the proxy in the network to local host and the port to 8080 then the app send the update to ota and i download it and run it
Click to expand...
Click to collapse
I can't find the local host and port in the app in my phone....isn't it on firmware finder ? or somewhere else ?
Guys I'm really lost trying to upgrade to Android 6 or even 7.
I know I must upgrade to at least EMUI 4.0
I know I am rooted.
I'm unsure if I have unlocked my boot loader.
How do I easily change Country Codes? Do I even need to do it?
I think if someone can assist with these early steps, then I can proceed alone to install new ROMs etc.
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
amageek said:
C636 is for South East / South Asian regions...
To check whether you've unlocked your bootloader or not, just boot into the fastboot mode... To do that, shut down your device completely then connect your device to your laptop / PC holding the volume down button. Once you enter into fastboot mode, there a Message will be displayed under the Android Logo. You can confirm whether your bootloader is locked or not.
If your only goal is to get Marshmallow, then you can search for firmware and then manually upgrade using the dload method.
First, you download the required firmware (gradually up to Marshmallow), then you extract the update.zip to get UPDATE.APP file (usually 2.3GB+). Then you copy the UPDATE.APP file into a folder named dload. You must then copy this dload folder to the root of Internal Memory and you can update your Android through Updater.
Here's the link to Marshmallow C636B540
Click to expand...
Click to collapse
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
aussie_boi said:
Okay, yes all that is cool. Further info I have now managed to instal TWRP 2.8.7. So I will try to now install c636B540.
Click to expand...
Click to collapse
try installing TWRP v. 3.1.1... That's the latest TWRP and compatible with Marshmallow...
I'm not an English native speaker, so I won't write in perfect English, hope it is understandable.
The questions are in the bottom of the post.
-
So, I recently bought an Huawei P10 Lite. I'm new to the Huawei scene but I modded some Samsung phones some years ago.
When I booted up my Huawei for the first time, I saw the "TIM" (a telephone operator in Italy, I don't know how you call it, but it's similar to T-Mobile, Verizon, Vodafone etc.) bootanimation.
I was afraid that my P10 Lite would be full of bloatwares, but it wasn't.
So, thanks to this, I have 10GB left, 12GB occupied by installed applications and games, and 10GB occupied by the system.
The only problem with the branded version of this smartphone is that I have a custom bootanimation, which is very slow and runs on a very low framerate, and I have to wait extra months when a new patch/version is released.
Also, I can't understand why the system occupies 10GB, it's too much for me.
So, since yesterday, I searched for solutions and found some answers.
The first one is rooting, but I don't like that. I often do some things on rooted devices which lead me to brick them.
Another solution I found is using "Firmware Finder". I opened it and he recognized my phone as a "WAS-LX1AC55B176" (WAS-LX1A / Build 176), which is the actual version installed on my device. So I tried to install the newest version (Build 187 not Full OTA) via Proxy (he failed) and via DNS. Using the DNS method, I waited 10 minutes and got the 300mb downloaded. The only problem is that it asked me to download more and more patches until I reached the Patch 11 with 3,68GB download, then I gave up.
Now I'm considering to try the WAS-LX1AC432B191 (European) version in Full OTA (I'm going to try the 300mb one, too) but I don't know if there are any differences between C55 and C432 (Yes, I know that one is branded and one is not, but I mean differences like Single or Dual SIM etc.).
At the moment, my phone is Single-SIM and it has 4/32GB of RAM/ROM.
-
So here are the problems:
- Do I lose all my data with a OTA update via Firmware Finder DNS?
- Do I brick my device if I do an OTA update via Firmware Finder DNS switching from C55 to C432?
- Does the C432 version work only with Dual-SIM or 3/32GB or 4/64GB devices?
- What C432 build190 do I have to download? There are 3 OTAs (103343, 103344, 103459) and 1 Full OTA (103460).
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
foliaje said:
mister if you want debrand your device from c55 to c432, you need:
all files are in the forum
unlock bootloader(please copy code to safe place, and all data required).
download oeminfo c432 ss or ds and b182(ds) and b183(ss)
twrp
adb drivers(install in c
-----------------------------------------------------
download serviceRom and extract, insert a sdcard on your laptop and create a dload folder. Open the rom downloaded until dload, copy update.app + all was folders.
now with the device, poweroff and conect to laptop:
frp: enable oem unlock(go to about phone), press several times to developer settings, then go to developer settings and scrol until oem unlock and enable(yes or yes).
- fastboot: vol- + power
- cmd(cd c:/adb): fastboot oem unlock your code, press yes and config device
- twrp: fastboot flash recovery recovery.img, finished type fastboot reboot(plus vol +) until you go to huawei erecovery, poweroff and unplug, press vol+ and power.
- in twrp: make a backup only oeminfo(copy yes or yes to safe place) on your sdcard, copy/replace the downloaded oeminfo to twrp backed up folder and press restore. poweroff
- dload: press vol +/- and power untill update starts.
Click to expand...
Click to collapse
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Step by step video to fix your bricked P10 Lite
This video is made to help everyone to successfully fix your Bricked Huawei P10 Lite
Follow the below youtube video link clearly to unbrick your Huawei
https://youtu.be/0vDgDXePAR4
Cheers.....
zYoshi said:
Thanks for replying, but I don't want to root my device, guess I have to wait until Oreo comes out. When it does, I'll root my device and take the risk to update it (for me, it's very risky, I'm not that good in rooting "new" devices.
Click to expand...
Click to collapse
root is unnecesary when you want debrand the device
foliaje said:
root is unnecesary when you want debrand the device
Click to expand...
Click to collapse
But don't I need root to access TWRP and all that type of things?
zYoshi said:
But don't I need root to access TWRP and all that type of things?
Click to expand...
Click to collapse
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option ?????
foliaje said:
yoshi with root user you can do things that with a normal user can't, such as uninstall system apps.
with twrp you can back/restore/wipe/flash etc.... obviously debrand or not, util oreo update but you need wait until huawei and your operator decide relase
twrp=huawei no good option
Click to expand...
Click to collapse
You don't understand.
I don't want to loose my warranty only because I can't wait, so I'll root my device when the warranty will expire (so, in 2020).