So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions
ketchup539 said:
So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions
Click to expand...
Click to collapse
Normally it does not matter what baseband do you flash(thats only my opinion,when im false then sorry).my phone is mixed:the cusrom that im using based on DXLE1 a asia one and my baseband is XXLE1 a german one,the only thing on my phone is the language,its englisch but only the normal settings etc. all apps and etc. are in german and i have never problems.try an version from this thread to test.i think that you have a brandet phone,its a prepaid pack right?
http://forum.xda-developers.com/showthread.php?t=1465800
CALIBAN666 said:
Normally it does not matter what baseband do you flash(thats only my opinion,when im false then sorry).my phone is mixed:the cusrom that im using based on DXLE1 a asia one and my baseband is XXLE1 a german one,the only thing on my phone is the language,its englisch but only the normal settings etc. all apps and etc. are in german and i have never problems.try an version from this thread to test.i think that you have a brandet phone,its a prepaid pack right?
http://forum.xda-developers.com/showthread.php?t=1465800
Click to expand...
Click to collapse
You're from Cologne! How cool. I'll check out that link, and yes, my phone is a prepaid carrier branded one. However I haven't read anything about roms for it because it's only sold in New Zealand and there are probably only like 10,000 of them out there.
Thanks!
Don't suppose you have a flashable version of your DOKK baseband I could download? I made the stupid mistake of flashing my phone with an international version after I bricked it and didn't make a backup. Now it's not showing the XT network anymore.
Telecom Nz Galaxy Y Stock Rom
ketchup539 said:
So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions
Click to expand...
Click to collapse
Hey Ketchup,
I also have the Telecom NZ galaxy y and have experienced the same issue regarding the camera, and the accelerometer is also out by 90 degrees. However I did not make a backup of the stock rom
Can you please please please upload your copy of the stock rom so that I can download it? It would be very much appreciated as right now my phone is nearly unusable :crying:
Thanks very much
glendinningds
glendinningds said:
Hey Ketchup,
I also have the Telecom NZ galaxy y and have experienced the same issue regarding the camera, and the accelerometer is also out by 90 degrees. However I did not make a backup of the stock rom
Can you please please please upload your copy of the stock rom so that I can download it? It would be very much appreciated as right now my phone is nearly unusable :crying:
Thanks very much
glendinningds
Click to expand...
Click to collapse
Same. How do you solve these?
Sent from my Galaxy Y (S5360T) running Jelly Blast V3
My god, finally a person with my phone who understands, what important wondering is what file controls the autorotation in the roms and can it be replaced with the stocks version?
Sent from my GT-S5360T using xda app-developers app
I gave up on xda's roms that they offer cos they all have the same auto rotation issue... Gaaaaaaahhhhh!!!!!
Sent from my GT-S5360T using xda app-developers app
Starweaver1 emailed me a link to a site where you can download the ODIN files for the original Telecom firmware. There has also been a revised firmware version released in September(?) of 2012 that features an updated lockscreen similar to the galaxy s3's. I might upload it here soon if you guys want.
Hi all,
I recently bought a Galaxy S4 337M that was rooted and loaded with a custom ROM. I decided to go back to stock so went to sammobile.net and got the latest rogers firmware for my galaxy S4 (which they said was 4.3).
I loaded with ODIN, all went well, rebooted stock, but the max signal icon I can get now is 4G (even though I used speedtest and am getting close to LTE download speeds I think). Any idea why my LTE is gone ? Did I download the wrong ROM ?
I also noticed that none of the APN settings were there and no rogers apps were installed either. Makes me wonder if it was indeed a stock rogers rom after all.
Another strange thing is that it shows me a bell canada navigator update is available in the google play store, yet its not even on my phone. Regardless, even if its a Bell ROM by some chance, Bell Canada has LTE as well, so I am confused.
Btw I used the standard ltemobile APN settings that I always use on all my phones to get LTE (that always work)....
Any help or suggestions would be really appreciated, thanks so much !!!
My iPhone shows LTE using the same SIM...
PS. If I do need to get an original Rogers ROM, is sammmobile not the best place lol ? Any other places to go??
captiv123 said:
Hi all,
I recently bought a Galaxy S4 337M that was rooted and loaded with a custom ROM. I decided to go back to stock so went to sammobile.net and got the latest rogers firmware for my galaxy S4 (which they said was 4.3).
I loaded with ODIN, all went well, rebooted stock, but the max signal icon I can get now is 4G (even though I used speedtest and am getting close to LTE download speeds I think). Any idea why my LTE is gone ? Did I download the wrong ROM ?
I also noticed that none of the APN settings were there and no rogers apps were installed either. Makes me wonder if it was indeed a stock rogers rom after all.
Another strange thing is that it shows me a bell canada navigator update is available in the google play store, yet its not even on my phone. Regardless, even if its a Bell ROM by some chance, Bell Canada has LTE as well, so I am confused.
Btw I used the standard ltemobile APN settings that I always use on all my phones to get LTE (that always work)....
Any help or suggestions would be really appreciated, thanks so much !!!
My iPhone shows LTE using the same SIM...
PS. If I do need to get an original Rogers ROM, is sammmobile not the best place lol ? Any other places to go??
Click to expand...
Click to collapse
I believe that all I337M uses that same firmware but you need a CSC changer to make it change to your carrier as they don't release the specific ones with the carrier apps.
Search "Samsung CSC" in the play store and you should get one.
Thanks for the reply.
Seems I need root - which I deleted when doing a factory restore.
The strange thing is that it was supposed to be a rogers based firmware that I downloaded and flashed.
Maybe something went wrong in the flash.
Will try again.
And check out the CSC
i have a bell i337m and i have the same issue when flashing from a "custom rom to stock" and i have to flash the firmware using odin a second time and than i get my LTE icon enstead of the 4G icon, sounds weird and i can't explain why it takes 2 flashes to get it to show up proper, but it does.
i also have the problem with missing phone vendor apps, the second flash also makes these show up too.
also another thing i noted about my phone is if i don't root and install recovery to wipe, odin will dirty flash my roms, even though odin is supposed to wipe it isn't.
i've tested this to no ends, the results are 100% the same everytime.
Amb669 said:
i have a bell i337m and i have the same issue when flashing from a "custom rom to stock" and i have to flash the firmware using odin a second time and than i get my LTE icon enstead of the 4G icon, sounds weird and i can't explain why it takes 2 flashes to get it to show up proper, but it does.
i also have the problem with missing phone vendor apps, the second flash also makes these show up too.
also another thing i noted about my phone is if i don't root and install recovery to wipe, odin will dirty flash my roms, even though odin is supposed to wipe it isn't.
i've tested this to no ends, the results are 100% the same everytime.
Click to expand...
Click to collapse
After flashing the stock Rom, go back into stock recovery and wipe data and cache, then reboot that should fix it. To fix your csc issue there is a way to do it by dialling a number on your dialpad which includes your imei number then you choose a specific code. Search for it, google
Sent from my SGH-I337M using XDA Premium 4 mobile app
Thanks so much for the replies and help.
I wiped the rom just for fun and rebooted and noticed that its actuality a BELL ROM (all stock BELL apps etc), but when I entered my rogers APN settings it still only showed H+, maybe due to network differences. It's frustrating because I specifically selected a Rogers S4 ROM from Sammobile.net. Any idea where I can get a stock rogers ROM for s4? Also do you think this may have affected my 4G/LTE issue ??
Either way, I will definitely flash the correct ROM twice, and then go back into stock recovery to to wipe data and cache.
Thanks again for all your help
captiv123 said:
Thanks so much for the replies and help.
I wiped the rom just for fun and rebooted and noticed that its actuality a BELL ROM (all stock BELL apps etc), but when I entered my rogers APN settings it still only showed H+, maybe due to network differences. It's frustrating because I specifically selected a Rogers S4 ROM from Sammobile.net. Any idea where I can get a stock rogers ROM for s4? Also do you think this may have affected my 4G/LTE issue ??
Either way, I will definitely flash the correct ROM twice, and then go back into stock recovery to to wipe data and cache.
Thanks again for all your help
Click to expand...
Click to collapse
follow this guide, http://www.droidviews.com/how-to-change-csc-in-samsung-galaxy-phones/ real easy, itll put you back to a rogers rom, all the firmwares on sammobile are BELL ROMS. you have to change the CSC yourself.
THAT WORKED
Thanks so much !!!
Hi community I got my SGs4 from China and it is i9505 but came with i337 bootloader and Baseband,TW 4.3MK2
I got this from the phoen info app:
GENERAL INFO
Phone model:GT-i9505
Device type:jflteatt
Product Name:jflteuc
FIRMWARE INFO
Bootloader version: I337UCUEMK2
Baseban version: I337UCUEMK2
PDA version: I9505ZHUEMK2/i337UCUEMJ6
CSC version: i9500ZSUEMJ6
OS INFO
Build number: JSS15J.I9505ZHUEMK2(I337UCUEMJ6)
I want to know what firmware can I flash( because I want to update to 4.4.2 but dont know the right firmware),is my bootloader locked,can TWRP be install or do i need SS? and anything you can add will be appreciated
Well I think this info is important if you need more just ask me,if you need my build.prop I´ll upload ,looks like a hybrid firmware between I9505&i337
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Strephon Alkhalikoi said:
This seems like a definite Frankenstein. AT&T bootloader and device type, I9505 PDA and phone model, and I9500 CSC.
Your first task will be to download the AT&T firmware and install it. Then you need to borrow a friend's AT&T SIM and test to see if you're getting LTE. If you get LTE, then you have an AT&T phone, regardless of what anything else says. Unfortunately, that will mean you have to use Safestrap.
How much did you spend on the phone?
Click to expand...
Click to collapse
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
The fact it was sealed doesn't mean much. You're the second or third person I've seen on the forum asking about this, and in the case of the first user he was able to get his device working perfectly using the AT&T firmware. Regardless, the fact you weren't able to pick up LTE is a clue. It leads me to believe that in this case the phone may be correct but the firmware wrong. Here's why.
If you had an AT&T phone, as I suspected, your phone should have picked up LTE if it was unlocked for use on any carrier, as both Telcel and Nextel use band 4, while Movistar supposedly uses band 2, bands which an AT&T phone supports (bands 1, 2, 4, 5, 7, and 17). Check Telcel's coverage map to be certain you have LTE coverage in your area.
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Try the firmware you downloaded, but I suspect you're going to want to return the phone if you want LTE service.
this phone.....
Strephon Alkhalikoi said:
Neither an I9500 nor an I9505 would pick up those LTE bands. The I9500 doesn't have LTE at all, and the I9505 has LTE bands 1, 3, 5, 7, 8, and 20. Neither phone will get LTE in North America (including Mexico). The best those phones will do is HSPA+, which on the AT&T firmware would be labeled as 4G.
Click to expand...
Click to collapse
This is the scenario with my *chinese* version of the i9505.
I downloaded CPU-Z and it shows hardware: i9505, however, kernel build is a AT&T one.
I am REALLY SKEPTICAL to flash CM11 on it because I am very afraid to brick this phone. paid 300$ for it.
The funny thing is, I have the EXACT same phone as OP.
Anything I could try? please note AT&T doesn't work in Canada, nor I can borrow someone's AT&T sim card.
HOWEVER, I do have experience with a previous confirmed i337, and with bell it picked up LTE waves.
However this one doesn't.
Probably safe to flash?
I think my pat response to anyone purchasing these phones from now on will be to return them and purchase one through a Samsung-authorized retailer if Swappa isn't an option. For example, as of the time and date I write this, on Swappa there are currently 32 of the AT&T Galaxy S4 available, with prices ranging from $184 to $500US. The T-Mobile version, which doesn't have the locked bootloader of the AT&T model, has 8 devices available with prices ranging from $255-$310US. That doesn't include the Active variants or the MVNO-branded phones.
Purchasing a cell phone through eBay is, to be blunt, dangerous. You have no guarantee that the phone will be clean for activation, no guarantee that you won't have to do additional work to get the phone working, and no guarantee that the phone is even legitimate. Couple that with the buyers not doing their homework before purchasing and you get a clusterf**k of major proportions.
So, return the phone. If the seller doesn't accept returns, do a chargeback on your credit card. Or else put it up for sale as a parts phone.
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
VladimirMan93 said:
Albie, can you please let me know when you get home if the phone picks up AT&T LTE waves? I am convinced this is the i9505 due to the baseband and specific board details (which correspond to the i9505 model rather than the i337, but not GPE)
Click to expand...
Click to collapse
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Albie_Stark said:
Right Now I'm on mexico with Telcel, my friends are on USA T-mobile,Verizon, Try to use Telcel LTE data and it connect to 4G, LTE logo dont appears.
I went to sammobile and download the 4.4.2 from hong kong, I'll flash trough odin to see what happens
I Got it on ebay for 255 dlls when it arrive home the phone was sealed
Click to expand...
Click to collapse
Albie_Stark said:
I'm not a AT&T user my apologies, I used to be Cleartalk wireless user(took my verizon SGS4-i545 and flashed with them) but I drop the contract sell my phone to buy this SGS4-i9505, I'll be hard to get a AT&T sim, I download from Sammobile the i9505 4.4.2-NK2 firmware from hongkong and then try to flash through Odin,because 4.3 has a poor battery life in my case,but before I flash it I'm making a Flashable Zip for safestrap to extrac the "build.prop" and see what is in there, because may be this update fix some problems :fingers-crossed:
Click to expand...
Click to collapse
I did some more snooping around desperately trying to find out more information about this phone and the last thing I remember reading about before going to bed was:
No matter what we try, this phone is with a locked bootloader after the knox 4.3 update.
Unofficial firmware can and will brick this phone resulting either in a soft-brick OR, for the more unlucky ones, even a hard brick.
BUT, I also found other contradictory posts claiming that regardless the presence of the knox update, the bootloader IS infact unlocked.
It's hard to take a side due to the lack of tools to verify if the bootloader is in fact locked.
Could you please do me a HUGE favor?
if yes:
Go to your download mode and if possibly post a snapshot of the screen. I've included mine.
For some stupid reason, even though it's a i9505, it is recognized as AT&Ts SGH-I337.
Since I don't have my camera lying around, I'll write word for word what's on my screen:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
System Status: Official
Knox Level Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write Protection Enable
eMMC Brust Mode: Enabled
Click to expand...
Click to collapse
If this flash works for you, please let me know.
If the BL is unlocked in the Firmware you're trying to flash to it, Please let me know.
I want to go out of this nightmare and continue with my work.
and if you could share links in a PM to me or here, that would be simply perfect.
Cheers and thanks for everything
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Albie_Stark said:
We have the same download mode screen -_- u.u ,I try to flash the NK2 and it fail than t means we have a locked bootloader :'( ,couple of minutes ago I dowload the mk2 & NB2 for i9505 from Hongkong I would flash them at 10 pm pacific time I will keep you updated my last resource will be to flash mk2 for the AT&T variant in my case I can live with that if root is available ooo! just found a threat to get 4.4.2 NB1 but it is for the i337 anyway Let me see what happens with the 2 Downloaded firmwares
Ps:I don't really care about the warranty so if there is a good dev reading this helpme.to install the i9505 official firmware from any country,
Click to expand...
Click to collapse
Anxiously waiting your progress!
It's simple.
You got an SGH-I337.
You probably got a rom installed that is ported from I9505 and they didn't edit the build.prop.
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
MK2 & NB2 for i9505 HKong version give "secure check Fail:system" cant find answer for that......with the 4.42 firmware it gave me "secure check fail:aboot"
Strephon Alkhalikoi said:
I'd crack open the phone and look for the model number on the motherboard. That would eliminate any and all confusion.
Click to expand...
Click to collapse
man ,following your advice,flashin mk2 for i337 I done with this, Should hear you since the begining now odin is flashing
"Damn you 15's :Joey Tribbiani Quotes"
Hope this help you
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Do not do anything stupid my friend!!
Albie_Stark said:
@VladimirMan93 Sorry man I fail on my quest our hope is flash mk2 for i337 and if You want to update to 4.4.2 or 4.4.4
follow this threat is very usefull you will find MK2 ,the updates,rooting& safestrap
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 :good:
Click to expand...
Click to collapse
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
VladimirMan93 said:
ALBIE!
DO NOT DO ANYTHING STUPID!!!
I just rooted my phone with success man!
Here is the link. literally took me 5 minutes. just be sure to:
1) no a-v on the phone!!! <- Very important!!!
2) use high quality USB cable
3) be patient.
4) have a VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY VERY big nerdgasm like I did when my 4.3 pos was rooted!
Code:
http://forum.xda-developers.com/showthread.php?t=2565758
here is the link my friend enjoy your rooted HongKong version of the i9505
PS: Are you willing to experiment a little more with it? Let me know I have something in mind.
Click to expand...
Click to collapse
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Albie_Stark said:
Thanks man ,but I follow that threat the first day my phone arrive with success, install "Samsung phone info" to look deeper,that was the moment when I realize that my phone was a mess. tried to install the custom recovery,when I went to download mode I saw the screen you posted before, try to flash official firmware from samsun gi9505 -odin giveme the "aboot fail" wich means lock bootloader so I start this threat. the rest is history.... this afternoon I check the hardware and surprise!!! "I337" was all over the phone except for the sticker in the battery slot......
Flash 4.3MK2 for i33 via Odin,it intalled super fast with no problems then follow the threat I recommend you to take the update to 4.4.4NJ4 root,intall safestrap I´m so happy with my new improve battery life and maybe tomorrow I flash wanamlite,If I was able to flash it before on mi SGS4 from verizon I guess I can flash on my new phone wich has the same hardware that i9505,becsuse I read this on te forum:
"I337,i9505 & M919 have the same hardware except for the bootloader. any way I keep looking and experiment until I can install i9505 firmware through Odin
Click to expand...
Click to collapse
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
VladimirMan93 said:
The only reason I buy the S4 is because Cyanogen mod 12. I am so excited to figure out how to put it on this phone. And they have compatible ROM!!! :C
Which is how this is so much more intense.
I WANT IT, I WANT IT! I paid 400$ for my freedom, I want it!! D:
Click to expand...
Click to collapse
OMG I paid 255$ !!! I belive Isaw you in other forum asking right??
Hope they find how to unlock the BL or AT&T give us Unlock BL with the Lolipop update