Hello to all of you. I do have a question related to this as far as i tested, great ported rom phronesis. Are there any posibility and how to, modify the incalui.apk of the rom in order to display full screen or at least half of the screen, of the caller id. Randomly i see a half of the screen picture of the person which calls but after i answer it turns round and small picture, the same when i select the contact and proceed to dial the number.
Many regards.
adriancristina said:
Hello to all of you. I do have a question related to this as far as i tested, great ported rom phronesis. Are there any posibility and how to, modify the incalui.apk of the rom in order to display full screen or at least half of the screen, of the caller id. Randomly i see a half of the screen picture of the person which calls but after i answer it turns round and small picture, the same when i select the contact and proceed to dial the number.
Many regards.
Click to expand...
Click to collapse
If it suits your taste
http://forum.xda-developers.com/showpost.php?p=63132563&postcount=11040
Sent from my SM-N920C
adriancristina said:
Hello to all of you. I do have a question related to this as far as i tested, great ported rom phronesis. Are there any posibility and how to, modify the incalui.apk of the rom in order to display full screen or at least half of the screen, of the caller id. Randomly i see a half of the screen picture of the person which calls but after i answer it turns round and small picture, the same when i select the contact and proceed to dial the number.
Many regards.
Click to expand...
Click to collapse
Hey man can u give the audio config file in system/etc/ of phronesis rom?
Related
One common problem:
in many phone is that the phone number edit by keybord is too small same problem in all HTC devices.
There is a way to increase the numbers size?
Black Eagle
I'm assuming you mean that you want larger buttons in the dialer app? If so, just dowload one of the cab versions that you like from here http://www.paulya.com/dialerskins.htm
That's basically just the E-Ten Dialer with various skins applied to it as a cab file. They do have the loose skins on the bottom half of the page, but the cab should be the easiest to deal with.
SOOORRY BAD ENGLISH,
No, I speak really about the number size, that common appear in the device display.
I have the tytn that have a very large screen, but I don't understand why with all the considerable space free, the number to call edited by screen keybord must be just sized about 4 mm.
My question is: There is anything to do for change their size?
Black Eagle
Hi Motionmind,
Just wanted to confirm that the Eten skins you mention will retain the smart dial function or not.
Thanks for your help.
srmz said:
Hi Motionmind,
Just wanted to confirm that the Eten skins you mention will retain the smart dial function or not.
Thanks for your help.
Click to expand...
Click to collapse
I think that site has a couple that do work with smart-dial or he is at least working on some that do. The majority of them, however, do not.
Something i REALLY hate with Windows Mobile, is the complete waste of the display. Everything is written with tiny ugly font, instead of a big clear font (i know you can change font size, but that only applies to some few things).
On incoming calls, theres LOTS of space to display caller id/name, but no, it only displays it with a tiny font leaving 90% of the dialog with white pixels, so it's impossible to see it if you have your phone mounted in your car.
Does anyone know if it's possible to change fonts size of the incoming call dialog, or some third party application that replace the entire screen?
I tried a search, but i don't really know what I should search for?
GeeZuZz said:
Something i REALLY hate with Windows Mobile, is the complete waste of the display. Everything is written with tiny ugly font, instead of a big clear font (i know you can change font size, but that only applies to some few things).
On incoming calls, theres LOTS of space to display caller id/name, but no, it only displays it with a tiny font leaving 90% of the dialog with white pixels, so it's impossible to see it if you have your phone mounted in your car.
Does anyone know if it's possible to change fonts size of the incoming call dialog, or some third party application that replace the entire screen?
I tried a search, but i don't really know what I should search for?
Click to expand...
Click to collapse
If you want something for PICTURES of contacts of incoming calls, you could try ProPhotoContacts, I use that a little and it just displays a large pic of the caller and some info ( you can choose between business style, personal, or just name and number to be displayed.)
If you just want larger text, idk what you could use for that, but there are many good 3rd party contacts apps that do what you are looking for.
b.mann said:
If you want something for PICTURES of contacts of incoming calls, you could try ProPhotoContacts, I use that a little and it just displays a large pic of the caller and some info ( you can choose between business style, personal, or just name and number to be displayed.)
If you just want larger text, idk what you could use for that, but there are many good 3rd party contacts apps that do what you are looking for.
Click to expand...
Click to collapse
I don't want pictures - i just want the number/name to be readable from 1 meter distance - so i guess i need some 3rd party application to replace the default dumb dialog.
But i haven't found any, and i'm really not sure what keywords i should use? Have anyone found an appliaction like that?
GeeZuZz said:
I don't want pictures - i just want the number/name to be readable from 1 meter distance - so i guess i need some 3rd party application to replace the default dumb dialog.
But i haven't found any, and i'm really not sure what keywords i should use? Have anyone found an appliaction like that?
Click to expand...
Click to collapse
That's a darn good ?. Even the pictures assigned to my contacts are too small to see who it is calling. Luckily I have different ring tones to each of my contacts, I know who's calling by the ring tone.
I remember there was an app for Symbian that allowed for full screen caller ID pictures. Don't remember which one it was... my last Symbian phone was the Pana X700 and I stopped using that back in summer of '05 when I discovered the Blue Angel.
But there's got to be something for WM as well. Have you checked all the freeware sites?
there's been a thread within the wizard forums about this app that changes the caller id bubble and is very customizable. Im gonna go look for it, and if I find it Ill report back
elmetal said:
there's been a thread within the wizard forums about this app that changes the caller id bubble and is very customizable. Im gonna go look for it, and if I find it Ill report back
Click to expand...
Click to collapse
That sounds promising. Hope you find it!
GeeZuZz said:
That sounds promising. Hope you find it!
Click to expand...
Click to collapse
I GOT IT!
http://www.jgui.net/phoneprofiles/index.html
check that out, scroll about 1 or 2 pages down it shows a screenshot of a diff bubble. that is your software sir!
Anybody Know?
I was wondering if anyone knew how to magnify just the picture of who is calling. That link above is great but it has all these additional features that i'm not interested in...i think my phone might explode if i put more softwares like that on it. I just want to be able to make the picture of incoming calls large. I have photo contacts pro and I don't like it. When an unknown caller is calling then it's completely useless...more importantly it doesn't recongnize callers from your sim card...that is why i stopped using it....if anyone knows that would really make my day
You could always make a jpeg with big bold letters of the contacts name and save it to their photo contact...
Hi folks,
is there any way of changing the incoming calls notification from this small bubble, where you need a lens to reed it, to full screen or at least half-screen?
Thanks for any hint
Have a look at S2U2 (slide 2 Unlock 2) It has full screen caller ID options.
http://forum.xda-developers.com/showthread.php?t=353008
thanks,
so I understood, there is no option in WM6 to change that? Only by a seperate program?
No nothing built into the OS. There are other 3rd party contact applications which also do full screen caller ID, but I can't remember which and they are all pay-for stuff anyway. S2U2 is a nice app if it fits round your use of your device.
Thanks, I'll try that. Are there any known issues? I think, I have somewhere read, that there are some problems with the cube?
Anyoner know of a program for Full Screen Caller ID?
I have used S2U2 and Photo Contact Pro, but the only reason I use them is for the caller ID. I would rather have a program just for a caller ID rather than install extra stuff I don't want.
Any ideas?
Thanks,
loki
Try the OPAL phones canvas which you can find here http://forum.xda-developers.com/showthread.php?t=430354 or with different color skins here http://forum.xda-developers.com/showthread.php?t=430768&highlight=phone+canvas
loki49 said:
Anyoner know of a program for Full Screen Caller ID?
I have used S2U2 and Photo Contact Pro, but the only reason I use them is for the caller ID. I would rather have a program just for a caller ID rather than install extra stuff I don't want.
Any ideas?
Thanks,
loki
Click to expand...
Click to collapse
Phone Canvat dialpad its good idea
ancola66 said:
Phone Canvat dialpad its good idea
Click to expand...
Click to collapse
Don't see a full screen caller id there...
good idea
no one thinks that he use the phone also sometimes in the car???? than you can see the small letters and picture so why not the picture bigger ??!!
thanks for asking this question
I think you mean this.
yip shomting like that but the link that you give isnt work whit HTC touch diamnond ?? butt thx any way
Syd159 said:
I think you mean this.
Click to expand...
Click to collapse
If you just want a full screen caller id, I'd recommend S2U2, which offers a real full screen caller id, with the option of "slide to answer".
Of course it comes with other functions as well, such as lock your device and volume control, but you can disable all those from the S2U2settings program.
http://www.ac-s2.com/
Discussions here:
http://forum.xda-developers.com/showthread.php?t=412418
Sorry I missed the part that you don't want to use s2u2.
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
THAT is something that also really annoys me.
i would love an option to turn that off!
I am using Pocket CM and it doesn't has that problem.
1 click on the contact to show detail and another click to choose which number you want to dial.
does it replace the standard phonepad app?
what we mean is when you press the dial button - then the dialpad and the call history appears.
clicking on a contact in the list leads to dialing the number.
in the normal wm contact app the klick leads to the contact like we know and want it.
matyu88 said:
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
Click to expand...
Click to collapse
I completly agree, I have been seaching for a solution..
didnt find a registry key that could solve that
this would be a nice feature to find
actually you have to slide the contact name to choose the phone number you dial, or the action you launch.
i agree this is the most annoying thinh in hd
I think you are talking about the Phone interface (Refer to User Manual P.50 Using Phone Features), when you short-list the contact you would like to select, on Point 4 of the Manual, it instructs you to
To call a different phone number
associated with the contact, select
the contact, then tap Menu >
Open Contact.
Instead, you can just simple "tap" on the right hand of the contact, it will pop up the contact detail, then you can select (tab on the associated number) to dail
Hope this can help.
matyu88 said:
how to disable the auto dailing when touching the contact in the dail pad? Is it possible to display the contact details like I-phone does? When using the prevous Diamond's netvigation pad, it is possible to open the contact details. But how can it works for HD with no direction pad? Please help, very inconvenient when choosing the contact with multiple phone number. HELP!!!
Click to expand...
Click to collapse
To call a different phone number
associated with the contact, select
the contact, then tap Menu >
Open Contact.
Click to expand...
Click to collapse
...select... How it to make, without calling number? Explain...
One way that I have tried is to change the phone dial skin to standard windows mobile. If you install the htc tweak written about in this forum you can easily change phone skins. The standard phone skin does not dial the phone when you tap the contact but gives you a list of phones for that contact. It does mean however that you will have another look for your phone dial.
yongkang said:
I am using Pocket CM and it doesn't has that problem.
1 click on the contact to show detail and another click to choose which number you want to dial.
Click to expand...
Click to collapse
Are you using a skin other than the default one for PCM? if so, wanna give a link?
gien29 said:
actually you have to slide the contact name to choose the phone number you dial, or the action you launch.
i agree this is the most annoying thinh in hd
Click to expand...
Click to collapse
I'm fine w/ just sliding, thanks a lot! Dunno why I didn't think of it lol...
This is also something that bugs me but not only that.
I drive to work by bycicle. When I do, I have my HD in my pocket, playing radio.
The HTC headset has 2 buttons embedded of which 1 auto dials the last number when pressed. Unfortunatly when your wearing a headset, have a laptop bag around your shoulder and during these Winter times are wearing sturdy coat, the button gets pushed accidentaly all the time.
Disabling that function would be brilliant too.
jim256 said:
Are you using a skin other than the default one for PCM? if so, wanna give a link?
All I know is that I found it as an option in the HD Tweak under the heading 1.8 Phone Pad Style. There are two options HD (Default) and Windows Mobile Standard.
Click to expand...
Click to collapse
apap said:
jim256 said:
Are you using a skin other than the default one for PCM? if so, wanna give a link?
All I know is that I found it as an option in the HD Tweak under the heading 1.8 Phone Pad Style. There are two options HD (Default) and Windows Mobile Standard.
Click to expand...
Click to collapse
Right thanks. I was merely referring to your use of PocketCM. Obviously some things are tiny using the standard included theme.
So my question was, aside from any dialing issues, I just wanted to ask real quick where you got a WVGA theme if you did (anyone know of one?)
Thanks.
Click to expand...
Click to collapse
i finally switched to the classic windows mobile phonepad. since i dont videocall anybody that is ok for me.
unfortunately the list doesnt support sliding with the finger for browsing the entries. and the entries are a bit small
andykha said:
...select... How it to make, without calling number? Explain...
Click to expand...
Click to collapse
if you just slide your finger across a certain contact, it will not call directly that contact, but change the phone number selected, if more numbers available, or switch to send text message etc.
I also discovederd that by accident, but its working and enough to solve this most annoying problem.
it seems there is no solution to solve it. Anybody have further suggestion. Please help for the frequent user of the smart dailing. Or if we could change the registry of the phone. Help!
promexx said:
i finally switched to the classic windows mobile phonepad. since i dont videocall anybody that is ok for me.
unfortunately the list doesnt support sliding with the finger for browsing the entries. and the entries are a bit small
Click to expand...
Click to collapse
...and the bluetooth status icon disappeared from the title bar, if you haven't noticed yet :-(
yes, and also the incomming call is not as it was before. didnt notice that until i got a call.
i now switched back to htc dialpad and have to live with that press and call thing