Related
Hi all again,
I must saw I've NEVER had to do so many posting for a single phone... anyway.
I just updated my Leo to 1.61 via a tortuous goldcard process and the proximity sensor is still not working correctly My wife is the main user of the phone and I was watching her while on a call- the screen was on and off like some demented Xmas lights.
I have a theory regarding the problem. It's only my wife who has the problem with the phone, it's seems ok with me (but I don't use it as much!). The phone is very wide, and the proximity sensor is not central. I think that the sensor is missing her ear (she has small ears!). The gap between her ear lobe top and her head is too great for the sensor. I tested the sensor gap with my thumb and it seems to be around 1cm to activate.
The hardware solution is either move the sensor so it's central (that's not going to happen soon) OR increase the sensitivity of it.
Does anyone know how to change the sensitivity of the sensor OR anyway to completely disable the touch screen during a call.
Hmm I can not believe that, I've tested my sensor:
It put the lights out if i come closer that 1,5 cm next to the screen during a call. So it think this is not the source of your problem.
But: I'm running a 1.48 rom...
I had the proximity sensor behaving eratically upon installing a screen protector. Even though I installed the original HTC screen protector which has 2 holes to position exactly over the sensors but even then I had problems. Ever since removing the screen protector everything is okay again.
Just thought if your problem also coincides with installing a screen protector.
Regards
The problem occurs when your hair overlaps the proximity sensor, the light immediately comes on. Stick the phone back to the ear and the proximity sensor works perfectly on time.
p.s. ive long hair and I too faced this problem and figured it out by running a few test as mentioned above ;-)
Hope this helps.
well, I'm having the same problem and It's not caused because of my hair. it just sometimes works and sometimes doesn't. the test I make is using the palm of my hand. if during one call It's not working, it won't work no matter what you do. then if I make a call and its working, I can turn on and off the screen placing my hand in front of the sensor..
jpresencia said:
well, I'm having the same problem and It's not caused because of my hair. it just sometimes works and sometimes doesn't. the test I make is using the palm of my hand. if during one call It's not working, it won't work no matter what you do. then if I make a call and its working, I can turn on and off the screen placing my hand in front of the sensor..
Click to expand...
Click to collapse
I reckon you clear the area around the receiver and try doing a hard reset.
CAUTION: Take an individual back of your data rather than doing a full backup using some software.
same problem
Hi, I have the same random proximity sensor bug problem. During call accidental hang-up happens every day. I have short hair and no screen protector. Is there any solution for this yet? thanks.
I wrote to HTC already, but they claim there is no problem reported. Sory for my English.
Had a similar problem. My proximity sensor is now working fine. Install the 'Proximity Sensor for Screen Off v0.2' cab. Search the forum for the thread.
thanks for tip, hope this little app will "evolve"...
hi,
i had the problem with the proximite, that it is only working when the phone is in portrait mode. when im incall and portrait i can put my finger to the sensor and it is working perfect. when i rotate the display to landscape the sensor does nothing and the display stays on. unfortunatly i turn the phone sometimes on the way to my ear, and so the screen stays on.
i will try now the mentoined .cab and see what it does for me.
regards mad
Hy all
I have a strange problem with my X10! The will not go off in a call! (or at least most of the times it won't) The sensors should turn the screen off while the phone is to to my ear but most of the time it will not!
There is a hidden menu that have tests for almost every hardware component but the test for the proximity sensor only shows that the sensor is OFF and won't do the test!
Ideas?
The sensor is the little black circle (sort of) above and to the left of the "n"
e.g. Sony Ericsso'n'
Have you tried putting your finger over it during the test?
same problem here i tried the finger-trick doesnt work
I tried it and the test shows ON while my finger is there! So the sensor works properly but why the dialer is not using it to control the screen?
As stated before, if you cover the 'hole', the screen would not react to any of your finger touches. The screen would still be on but would turn off according to your settings (like 30 seconds or 1 minute or whichever). Try it. Call someone, cover the hole and try to hit 'end call' or slide up the keypad and then cover the hole and try to hit numbers.
The purpose of the proximity sensor is to turn the screen off in a call while the phone is to your ear! if i cover the sensor it must turn the screen off! but it doesn't! There is some kind of timeout set to this! The screen will turn off but after some time! this makes the proximity sensor almost useless!
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Zenghelis said:
No, it is to disable touchscreen buttons. It will turn off when time you've selected is over and turn on again and enable touch buttons when you take the phone out from your face.
Though i think you're right, it should turn the screen off to save battery, it is silly to have the screen on when you are using it.
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Baggyb said:
Quite right!
I guess the expectations are again set by Apple's standards. Their proximity sensor functions as one would expect.
However the sensor on the X10 does what it was designed to do, and that's to deactivate the touchpad whilst the device is held up to your ear.
The screen timeout is a different setting all together (unfortunately).
Click to expand...
Click to collapse
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
superprelude said:
Not the expectation set by Apple. It's expectation for any right minded individual.
SE software is just well known as one of the worst top players in the industry.
FFS, they spent all the time on DRM, lock the phone, developing battery hungry useless software on 1.6 rather than push out 2.1 asap, that tells you something.
Click to expand...
Click to collapse
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
TechGuru_x10 said:
Why not go through the Manual once before abusing Company left - right.....
Let me copy and paste it for you guys........
Sensors
Your phone has two built-in sensors – a light sensor and a proximity sensor. The light sensor is used for automatic LCD backlight control. The proximity sensor turns the touch screen off when your face touches the screen. This prevents you from unintentionally activating phone functions when you are engaged in a call.
Click to expand...
Click to collapse
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
OrionBG said:
Yes and this is plain stupid use of the sensor! Take the HD2 for instance! Its proximity sensor turns the screen off the second you take the phone to your ear! This is done with every HTC device having the sensor! It is just misused on the X10! I hope that somebody here would correct this with a little program some day!
Click to expand...
Click to collapse
This is the main problem with us ,,, we start to compare and complain rather than think why did SE will give two sensors instead of one.
Answer is not known to me but this much I know they know better than us.
If you think you know better, be my guest and throw some knowledge here. I am new to Android but not to SE.
So im new to the forums, but I was having a problem with the proximity sensor...
As stated in a lot of threads, the proximity sensor does work and will "lock" the screen so that once your face is near the screen it will not allow any clicking of the buttons.
Also the screen is supposed to turn off about 15sec into the call. Mine turned off, but then all of a sudden turned on again...this would happen repeatedly.
I found out the solution...it seems advance task killer was not allowing the screen to turn off.
I had auto kill enabled and set it to when the phone was locked to kill apps.
I turned off auto kill, and everything seems to be working fine with the screen and proximity sensor now..
hope this helps anyone having this issue!
thx, same problem here !!
so its pretty clear none of us know the answer to this, but yet we're still bashing each other. LOL! ppl let's get constructive, we dont have the answers so lets accept the fact and seek help some where else.
o2 Germany told me, that Sony Ericsson will bring us an update within the next 4 weeks to all devices.
It will be an update with alot of bug fixes (e.g. proximity sensor ) and speed improvements.
So, be cool. Sony Ericsson is working on that and with Eclair in autumn, our battery will perform very well.
I wonder if my unit is faulty. I find that the auto rotate does not work very well. It refuses to rotate sometimes, and the only way seems to be to shake it. But when I do so, sometimes the orientation is upside downs.
Am I alone with this problem?
Hi Steve, my auto rotate isn't totally perfect but i'd say its good enough and i certainly haven't had to shake it yet lol
I find sometimes you need to lift it up (as if taking a picture) to let gravity kick in on the sensor.
Just had a thought....I installed a compass app (i think on the first day i got the phone) and i had to move the phone in a figure 8 to calibrate it, maybe i calibrated mine without knowing? that is if it even uses the same sensor?
Oh well, may be the fact that it does not rotate well is a good thing when using on bed. I'm looking at the half full glass.
This has been happening pre and post Nodo on my focus. If i'm on a phone call for at least a few minutes, then pull the phone away from my head, the phone's display should become active, but it isn't.
Anyone else having this issue or is it time to exchange the phone?
I have the same issue also it seems like I have to press the power button a couple of times to get it back.
Sent from my SGH-i917 using XDA Windows Phone 7 App
I'm also having this issue. Anyone remember if ther were having it pre-Nodo? Just wondering if the update changed something.
Regardless, it's a bit of a PITA.
I experienced this after having to replace a cracked screen. I just recalibrated the proximity sensor with my finger about an inch away and it worked fine.
ArcWhistler said:
I experienced this after having to replace a cracked screen. I just recalibrated the proximity sensor with my finger about an inch away and it worked fine.
Click to expand...
Click to collapse
How did you do that?
Yeah, ditto that - how do recalibrate the sensor?
Samsung Diagnostic App.
http://forum.xda-developers.com/showthread.php?t=839154
I was pecking around the screens months ago, and there was one bank of tests (multi-touch, red, green, blue, white, battery, etc, etc) that allowed setting and viewing the proximity sensor.
I remember playing with moving my hand closer, and further and watching it change from sensed to clear.
Sorry, can't remember which codes now.
I used the Wiki:
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Focus
LCD Test - *#0*#
Ok, mine says No Detection. Is there anyway to set the value?
One other thing to note, about the samsung focus specific update regarding disabling the touch sensitive buttons while in a program, that also isn't working for me either. Not sure if they are related, but thought I'd throw it out there.
And as far as calibrating goes, not sure it would help since the problem only occurs while I'm on a longer phone call. On short ones the proximity sensor works just fine.
If you move your finger closer to the sensor, it should eventually change to Detected. The "set" button at the bottom should set the proximity sensor to the new distance. Mine is around 75.
ArcWhistler said:
If you move your finger closer to the sensor, it should eventually change to Detected. The "set" button at the bottom should set the proximity sensor to the new distance. Mine is around 75.
Click to expand...
Click to collapse
Mine says No Dectection. It has Prox Sensor: XXX I've taken my entire hand and covered my phone. NOTHING. When I push SET, It says ProxThreshold :0. Is there anyway to set it manually?
samsung focus post nodo
I believe the prox sensor issue is happening post nodo, I have never had this problem prior to the update... I have been able to fix it temporarily by pulling the battery and starting it up... don't know how long the fix works... got to do some testing... I am wondering if its a power thing as the screen wouldnt work when you plugged it in to power and had on a soft surface....
Still nothing. I didn't want to hard reset since I have Chevron installed. For some reason I did four updates on my phone and don't have a single backup. If I hard reset I'm S.O.L. with Twin Blades and other homebrew apps
What value does it show when you press the Reg button?
I've had issues with my earring tapping the screen while I talk and I had it fixed before NoDo, but the values reset when it was installed, they also appear to be different values now as my screen got supper finicky after the update. I was constantly hanging up or scrolling through multiple pages of stuff with my ear and you could see the screen turning on and off. I ran the proximity calibration while holding my hand in front and set to it to 1.
If it shows xx have you tried setting the value with nothing in front of the phone to see if it will at least zero out?
BooR4dley said:
What value does it show when you press the Reg button?
I've had issues with my earring tapping the screen while I talk and I had it fixed before NoDo, but the values reset when it was installed, they also appear to be different values now as my screen got supper finicky after the update. I was constantly hanging up or scrolling through multiple pages of stuff with my ear and you could see the screen turning on and off. I ran the proximity calibration while holding my hand in front and set to it to 1.
If it shows xx have you tried setting the value with nothing in front of the phone to see if it will at least zero out?
Click to expand...
Click to collapse
It has a big red box. It says No Detection. Prox Sensor:XXX Do I press Set or Reg?
another thing is wrong
seems like my light sensor is fried as well... I am starting to wonder if it's because of bad placement of the usb port... both lay right in front of the port, can't imagine pluging in and unpluging the phone would help if the sensors are right in front. I can't get either sensors to work anymore, even with a battery pull... does anyone else have this issue? goto the diagnosis menu and type
*#05#
you should be able to run through all the tests, I skip the feedback loop... Start at 1 and work your way through.
My Prox sensor says, no sensor XXX, and my light sensor is stuck with a value and will not change even when I cover the sensor... looks like a warranty replacement... how does this work with a sd card installed, the official WP7 ATT certified 8GB? Anyone else have to do this?
rockclimbaudiextreme said:
seems like my light sensor is fried as well... I am starting to wonder if it's because of bad placement of the usb port... both lay right in front of the port, can't imagine pluging in and unpluging the phone would help if the sensors are right in front. I can't get either sensors to work anymore, even with a battery pull... does anyone else have this issue? goto the diagnosis menu and type
*#05#
you should be able to run through all the tests, I skip the feedback loop... Start at 1 and work your way through.
My Prox sensor says, no sensor XXX, and my light sensor is stuck with a value and will not change even when I cover the sensor... looks like a warranty replacement... how does this work with a sd card installed, the official WP7 ATT certified 8GB? Anyone else have to do this?
Click to expand...
Click to collapse
same problem here. seems like those two sensors are burned
I just got my note and am having problems with auto rotate.
I ran the tests in *#0*#
It looks like they all passed fine
But sometimes mine rotates n it's own and when it rotates, it sticks in Horizontal.
I do not understand the calibration instructions for Horizontal and Gyroscope.
For instance, when it says place device on a level surface and press calibrate, does that mean just place it on it's back on a table? Also, after it is done calibrating, should the gyroscope "ball" on that page move when you move the device? Mine is always stationary.
On the horizontal calibration, how do you position the device before you hit the calibrate button? Should it be landscape or portrait?
IMO they don't explain these very well and it's confusing how to set this up.
Yes, just place it on a table or the floor. Not sure with the gyroscope since i don't have the Note yet, but i imagine the ball moves.
If this is a bug it's a software bug. All Desire HD owners including me had the auto rotate bug when it got released. These are bugs that's very common on freshly released Android devices, and it will get fixed.
BazookaAce said:
Yes, just place it on a table or the floor. Not sure with the gyroscope since i don't have the Note yet, but i imagine the ball moves.
If this is a bug it's a software bug. All Desire HD owners including me had the auto rotate bug when it got released. These are bugs that's very common on freshly released Android devices, and it will get fixed.
Click to expand...
Click to collapse
Here's the question I have:
I only have 30 days for return if it's broken. Nobody else has complained about auto rotate yet and I would think that would come out pretty fast. I figured out mine had a problem 30 seconds out of the box.
Hi les_garten (another maemo/TMO refugee here!) - I've had my note for over a week, haven't seen any spontaneous rotations at all. I calibrated my gyro on day 1 though I think you don't ned to unless you are having problems. Once calibrated, the blue ball just sits in the centre of the circles, it doesn't move at all.
_pigro_ said:
Hi les_garten (another maemo/TMO refugee here!) - I've had my note for over a week, haven't seen any spontaneous rotations at all. I calibrated my gyro on day 1 though I think you don't ned to unless you are having problems. Once calibrated, the blue ball just sits in the centre of the circles, it doesn't move at all.
Click to expand...
Click to collapse
Thanx for that info! Mine also rotates when I turn horizontal, then won't go back into portrait.
How do you do the Horizontal calibration. Do you stand it on it's edge in landscape mode?
I'll never give Nokia another Nickel! Great idea with dismal execution.
horizontal calibration just involves sitting it flat on a flat surface. After calibration the ball can be "rolled" across both axes - like I said above, for me at least the gyro calibration screen does not allow the ball to roll at all either before or after calibration (hope that's what's supposed to happen, I've never had a phone with a gyro before, I would have assumed the ball was meant to move in response to tilt/turn ....
_pigro_ said:
horizontal calibration just involves sitting it flat on a flat surface. After calibration the ball can be "rolled" across both axes - like I said above, for me at least the gyro calibration screen does not allow the ball to roll at all either before or after calibration (hope that's what's supposed to happen, I've never had a phone with a gyro before, I would have assumed the ball was meant to move in response to tilt/turn ....
Click to expand...
Click to collapse
if you go into the dialer and dial *#0*#
then do sensors and run the Gyro tests and graph, it seems to be fine.
I have to keep auto rotate off.
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I would hate to keep it if it is broke.
I have the auto rotate bug also...you need to try many times before it will rotate... kind of embarrsing.. but I am sure it will be fixed first..but sometimes I wonder..if samsung have tired the phone at all before they ship it...such fundamental feature should work...without any problems
blackstar84 said:
I have the auto rotate bug also...you need to try many times before it will rotate... kind of embarrsing.. but I am sure it will be fixed first..but sometimes I wonder..if samsung have tired the phone at all before they ship it...such fundamental feature should work...without any problems
Click to expand...
Click to collapse
For some strange reason this makes me feel better!
bug was solved in 2.3.6 ..works without problems now.
blackstar84 said:
bug was solved in 2.3.6 ..works without problems now.
Click to expand...
Click to collapse
Thanx. I just did mine last night as well.
Very happy now!
i just got a galaxy note 3 weeks ago and it is running gingerbread 2.3.6
i have the same problem for the auto rotation problem, when i test the gyro and horizontal calibration, the ball doesnt move or move in a very laggy motion, when i lever my phone to a certain angle in all direction, the ball will not move in some area of the display. i had calibrated once before it has this problem, the ball move smoothly in any angle...now my message will auto rotate to landscape while i holding it in potrait...please help
I can't actually help fix anything - but if you enter *#0*# in the dialer and then select "sensor" from the LCD tests, then "image test" (under accelerometer sensor) you'll get a picture of a dog whichshould rotate between portrait & landscape as you rotate the phone, and there is an overlayed real time display of x and y axis angles as registered by the accelerometer.
This test should at least show whether the h/w is working or not.
Fix here
http://forum.xda-developers.com/showthread.php?t=1592170
I can fix that.This is from galaxy S2 but i dont knows how for Note, i try and working for Note. But after install from CWM, i see Setting/Display/ Gyroscope calibrationand Horizontal calibration. It not working. I was very afraid and i flash new rom N7000ZSLPF---------4.0.3 http://hotfile.com/dl/156123968/e690f65/N7000ZSLPF_N7000OZSLPF_OZS.zip.html
And now Gyroscope not work but rotation is work good.
Sorry my English
auto rotat pro
dude plz helppp......................I have to keep auto rotate off.:crying::crying:
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I dont wat to do:crying::crying::crying::crying:
saad elahi said:
dude plz helppp......................I have to keep auto rotate off.:crying::crying:
It will rotate Landscape, but won't return to portrait.
It wil flip Landscape on one side and Landscapeon the other side, but won't do portrait, till auto rotate is turned off.
Anybody have any suggestions on how to fix this?
I guess I could whack it and start over, but that blows! That would at least tell me something I guess.
It's really irritating. And I dont wat to do:crying::crying::crying::crying:
Click to expand...
Click to collapse
Since you are on Rocket ROM, check here:
http://forum.xda-developers.com/showthread.php?p=30107755