Database Users

[Stock][SGP312][5.0.2][PreRooted]10.6.A.0.454 VMo_De

Model : SGP312
Android: 5.0.2
Market: Germany
Build : 1273-3719_10.6.A.0.454_R2E
Included:
- UPDATE-SuperSU-v2.46.zip
Rom is prerooted but XZDualRecovery isn't working for TabZ with Lollipop at the moment so it's not included, check this thread for news about it : http://forum.xda-developers.com/showthread.php?t=2261606
Flash this zip from 4.4.* recovery and you're done
https://mega.nz/#!YFlihZoa!qR87H4kkVdE9GEG5kkxJ59-EBlc6CdsimqKgNJRJoTw

Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?

botsaris said:
Thanks a lot for this... Any chance to have and md5 so as to make sure it has been downloaded correctly?
Click to expand...
Click to collapse
Sure : MD5 Sum is 2245197dac0a7388d7f2f2b3ae63c26a

Tried twice but its not booting.....

*justintime* said:
Tried twice but its not booting.....
Click to expand...
Click to collapse
For me everything went fine...First boot takes while.

I know first boot takes a while. But its not booting at all. Screen stays off and i can only enter fastboot. But never mind. I while take a different route

Does it work with locked Bootloader?

redsk1n said:
Does it work with locked Bootloader?
Click to expand...
Click to collapse
yes, it's stock rom with stock kernel

Confirmed working.
Thank you!

Problem...
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?

DatFrosty said:
I think I did something wrong.
Flashed in PhilZ, installation (Rom and SuperSU) worked fine.
Selected "Reboot now" afterwards.
Now it's dead.
Nothing on power on, no fastboot, no flashmode...any suggestions?
Click to expand...
Click to collapse
Try VOL+ Power to reset it.

Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Tried it once, but probably held the buttons down too shortly.
Managed to get it to flash once, the three times.
Got into flashmode from there, everything running fine on 5.0.2 stock atm.
I guess next step is to root it
Thanks again man.

DatFrosty said:
Thanks!
That actually did the trick.
I guess the tablet was stuck in some sorta weird power-state.
Click to expand...
Click to collapse
This happens if tablet hangs with screen off.

hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!

duke_dreadmoore said:
hi, currently i'm in jb 4.3 with cwm installed..
Can I upgrade directly via cwm? thanks!
Click to expand...
Click to collapse
Yes you can. But this ROM on 1st post doesn't contain recovery, so you will have to install .zip with it via CWM too.

Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.

bobo1425 said:
Hi everyone.
Can I update from official kitkat with this rom?
My device is rooted but that's all. No recovery or unlocked bootloader. SGP311.
If it's possible how can I do that? Can I keep my data and apps?
Thanks.
Click to expand...
Click to collapse
without root and recovery no way to update.

Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.

Rassilon7 said:
Can anyone post a new link to the zip file? Mega no longer is hosting the file
Thanks in advance.
Click to expand...
Click to collapse
Hi, I should update my post with new build 10.7.A.0.22 (android 5.1.1) tomorrow

Thank you, that's very kind.

Looking for Testers with the T817 model to test new root hack.(tested and working)

NOTE: NOW CONFIRMED TESTED AND WORKING FOR THE T817T/W AND T817P MODELS.
Looking for testers with the T817 model (no ATT or Verizon models) to test a new hack to get root on Samsung stock SElinux Enforcing kernels running Android 5.11 or Android 6.0.
This means the kernel will be stock, so LTE will be unaffected.
Basically what this is about:
Chainfire has released new beta's of Supersu, the latest is 2.52. This new release can root Samsung 5.1.1 roms and Android 6.0 Marshmallow roms.
However to accomplish this a patch needs to be applied to the kernel Ramdisk to allow root with stock kernels.
What does this mean? This means if you have a T817 running Lollipop 5.1.1 then you can gain root and retain LTE connectivity as it uses the stock kernel instead of having to flash a permissive T810 wifi only kernel.
I need someone willing to test the patched Ramdisk and kernel on their device which has 5.1.1 installed.
The procedure is fairly simple all that is required is to flash the new boot.img, then root with Supersu v2.52.

Here is the patched boot.img for anyone that wants to test it.
*It goes without saying make a back up with TWRP first! *
FOR SM-T817T/T817W
Extract the boot.img from the zip then Install with TWRP:
Tab_S2_t817_boot.zip
FOR SM-T817P
Extract the boot.img from the zip then Install with TWRP:
Tab_S2_T817P_boot.zip
Then root with BETA-SuperSU-v2.52 using TWRP

I have a t817p I would be happy to test, how do I install twrp without root though?
Sent from my SM-T817P using Tapatalk

saramon said:
I have a t817p I would be happy to test, how do I install twrp without root though?
Sent from my SM-T817P using Tapatalk
Click to expand...
Click to collapse
If you have an SM-T817P I will upload a specific boot.img for you.
You dont need root to install TWRP, just install with ODIN.
Install with TWRP: Tab_S2_T817P_boot.zip
Stock Recovery if required: T817PVPU1AOH6_recovery

Flashed it, and I'm getting LTE

saramon said:
And I eagerly await the upload, I got TWRP installed
Click to expand...
Click to collapse
Important: make a full back up with TWRP first!

saramon said:
Flashed it, and I'm getting LTE
Click to expand...
Click to collapse
Do you have root?

Yup, sure do, got xposed installed too
Sent from my SM-T817P using Tapatalk

saramon said:
Yup, sure do, got xposed installed too
Sent from my SM-T817P using Tapatalk
Click to expand...
Click to collapse
So we can say we have success?
You are the first one to have root and LTE on a 5.1.1 S2 tablet!

Just to be sure, this does work with the Tmobile T817T, correct?
Edit: found answer.

graysooner said:
Just to be sure, this does work with the Tmobile T817T, correct?
Edit: found answer.
Click to expand...
Click to collapse
No idea. Nobody has tested it yet and come back with the answer.
Still waiting...

ashyx said:
So we can say we have success?
You are the first one to have root and LTE on a 5.1.1 S2 tablet!
Click to expand...
Click to collapse
I'd say so, great job!

Willing to try, but a question. If I flash with Odin, is TWRP installed also?

graysooner said:
Willing to try, but a question. If I flash with Odin, is TWRP installed also?
Click to expand...
Click to collapse
You have to flash twrp first. You will find my builds of TWRP in the development section.
Flash the 5.1.1 t810 version.

can't get into twrp
ashyx said:
If you have an SM-T817P I will upload a specific boot.img for you.
You dont need root to install TWRP, just install with ODIN.
[/URL]
Click to expand...
Click to collapse
i flashed the boot patched file odin is successful it says but kernel is not seandroid enforcing and will not boot into twrp, boots into stock recovery still

Aikavaras2015 said:
i flashed the boot patched file odin is successful it says but kernel is not seandroid enforcing and will not boot into twrp, boots into stock recovery still
Click to expand...
Click to collapse
That message is normal.
What you have to do is after flashing twrp you need to directly boot into twrp to prevent the stock recovery overwriting it.
Flash twrp again but disable auto reboot in Odin.
After flashing reboot by holding POWER + HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.

i did that, still booted into system not twrp
ashyx said:
That message is normal.
What you have to do is after flashing twrp you need to directly boot into twrp to prevent the stock recovery overwriting it.
Flash twrp again but disable auto reboot in Odin.
After flashing reboot by holding POWER + HOME +VOL DOWN then as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons.
Click to expand...
Click to collapse
still no twrp. just goes to stock. I have tried both times with autoreboot off, once with f reset checked and another with f reset unchecked.

Aikavaras2015 said:
still no twrp. just goes to stock. I have tried both times with autoreboot off, once with f reset checked and another with f reset unchecked.
Click to expand...
Click to collapse
Don't mess with f.reset
Honestly this is purely about timing. Plenty have already done it with the same device as you.
As long as you are flashing the correct twrp file then you should be good after following the advice above.
Can you flash twrp then post me a screenshot of odin?

How did you get xposed working?
[/U]
saramon said:
Yup, sure do, got xposed installed too
Sent from my SM-T817P using Tapatalk
Click to expand...
Click to collapse
I have the T715 but can't get xposed to work

LeeLongLang said:
[/U]
I have the T715 but can't get xposed to work
Click to expand...
Click to collapse
Please, this thread is only for testing the above kernels.

Help to Root A9 pro (SM-A910F)

I'm looking for a way to root "A910F" via google, but no results.
I tried "how to root for A9100" but without success.
Please help me.

Not so far
sanglxagdm said:
I'm looking for a way to root "A910F" via google, but no results.
I tried "how to root for A9100" but without success.
Please help me.
Click to expand...
Click to collapse
Hey there, I have a Google alert set for anything posted about this phone but so far nothing has come up on how to root it. Just two sites on how to update its version of android. (Sorry, I'm not allowed to post links as I'm a brand new user to xda, but likely these sites are not of use to you)
I'm still waiting for a way to buy it! And I've been waiting a long time. May I ask how you purchased it? Any help you could give I would really appreciate!

rapidrem11 said:
Hey there, I have a Google alert set for anything posted about this phone but so far nothing has come up on how to root it. Just two sites on how to update its version of android. (Sorry, I'm not allowed to post links as I'm a brand new user to xda, but likely these sites are not of use to you)
I'm still waiting for a way to buy it! And I've been waiting a long time. May I ask how you purchased it? Any help you could give I would really appreciate!
Click to expand...
Click to collapse
in italy here : http://brenovia.it/samsung/samsung-a9100-galaxy-a9-pro-dual-32gb-211.html

TWRP 3.0.2-1
sanglxagdm said:
I'm looking for a way to root "A910F" via google, but no results.
I tried "how to root for A9100" but without success.
Please help me.
Click to expand...
Click to collapse
TWRP 3.0.2-1. for the Samsung Galaxy A9 pro SM-A910F - Qualcomm MSM8976
Needs someone to test and report what works what doesn't giving plenty of detail and if possible the recovery log. It may boot, it may not.
Stock Recovery is posted below if TWRP doesn't boot.
NOTE:
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Boot to download mode.
Flash with Odin using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
NOTE: ON SOME ANDROID 5.1.1 and 6.01 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Install with ODIN:
twrp_3.0.2-1_sm-a910f_25716
Stock recovery:
A910FXXU1APFC_stock_recovery
TO ROOT
Flash the file below in twrp.
https://download.chainfire.eu/964/Su...0519174328.zip
.

Installed fine on my A9100! No more Chinese when I enter TWRP!!!! Thank u!

steberg said:
Installed fine on my A9100! No more Chinese when I enter TWRP!!!! Thank u!
Click to expand...
Click to collapse
Can you post the recovery.log as a file or on pastebin?
Sent from my SM-T280 using XDA-Developers mobile app

@ashyx
Attached the recovery file.

steberg said:
@ashyx
Attached the recovery file.
Click to expand...
Click to collapse
OK, twrp cannot mount data or storage at the moment because your device has encryption enabled and TWRP does not support Samsung encryption at the moment.
To mount data and storage data needs to formatted to remove encryption and a custom boot.img used to disable forced encryption.
Sent from my SM-T280 using XDA-Developers mobile app

ashyx said:
TWRP 3.0.2-1. for the Samsung Galaxy A9 pro SM-A910F - Qualcomm MSM8976
Needs someone to test and report what works what doesn't giving plenty of detail and if possible the recovery log. It may boot, it may not.
Stock Recovery is posted below if TWRP doesn't boot.
NOTE:
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Boot to download mode.
Flash with Odin using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
NOTE: ON SOME ANDROID 5.1.1 and 6.01 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Install with ODIN:
twrp_3.0.2-1_sm-a910f_25716
Stock recovery:
A910FXXU1APFC_stock_recovery
TO ROOT
Flash the file below in twrp.
https://download.chainfire.eu/964/Su...0519174328.zip
.
Click to expand...
Click to collapse
Hello I can be use this Files on SM A910F/DS Series??? Please reply me my phone is Dual Sim
hello please reply me can i use this file on A910/DS

ashyx said:
OK, twrp cannot mount data or storage at the moment because your device has encryption enabled and TWRP does not support Samsung encryption at the moment.
To mount data and storage data needs to formatted to remove encryption and a custom boot.img used to disable forced encryption.
Click to expand...
Click to collapse
I did format data and in TWRP I was then able to save recovery.log on internal storage. But after reboot it's back to encryption... I don't know how to make custom boot.img.
Thanks for your effort!

steberg said:
I did format data and in TWRP I was then able to save recovery.log on internal storage. But after reboot it's back to encryption... I don't know how to make custom boot.img.
Thanks for your effort!
Click to expand...
Click to collapse
I will provide the custom boot.img to disable encryption.

Ah that is awesome!!!

steberg said:
Ah that is awesome!!!
Click to expand...
Click to collapse
Flash with ODIN or extract the boot.img and flash with TWRP.
Boot to TWRP format DATA(not wipe). Please note this will delete all user data.
Reboot to TWRP, should now be able to mount data and make backups.
Boot to OS, forced encryption should be disabled.
A910FXXU1APFC_no_encryptable_boot
.

ashyx said:
Flash with ODIN or extract the boot.img and flash with TWRP.
Boot to TWRP format DATA(not wipe). Please note this will delete all user data.
Reboot to TWRP, should now be able to mount data and make backups.
Boot to OS, forced encryption should be disabled.
A910FXXU1APFC_no_encryptable_boot
.
Click to expand...
Click to collapse
Would this boot image work with the latest firmware for the A9100? Would you mind posting one if it won't? Could you also provide paypal info I'd like to contribute for your efforts.

trafficontrolr said:
Would this boot image work with the latest firmware for the A9100? Would you mind posting one if it won't? Could you also provide paypal info I'd like to contribute for your efforts.
Click to expand...
Click to collapse
It may do, but if it doesn't post up your boot.img.
If you go to the xda website the donate button should be on the left. Or use the link below. Thanks for your support. [emoji106]
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

ashyx said:
Flash with ODIN or extract the boot.img and flash with TWRP.
Boot to TWRP format DATA(not wipe). Please note this will delete all user data.
Reboot to TWRP, should now be able to mount data and make backups.
Boot to OS, forced encryption should be disabled.
A910FXXU1APFC_no_encryptable_boot
.
Click to expand...
Click to collapse
Yes It works fine now, even after reboot there is full access! I can now mount Data partition in twrp!
I get my paycheck tomorrow, so beer is incoming!
But there are some issues now in OS, most probably because the boot.img is for A910F and I'm on A9100... The navigation keys does not light up and is not working, also it will not turn on wifi even though I flip the switch. But finally some developer is taking the time for A9!

steberg said:
Yes It works fine now, even after reboot there is full access! I can now mount Data partition in twrp!
I get my paycheck tomorrow, so beer is incoming!
But there are some issues now in OS, most probably because the boot.img is for A910F and I'm on A9100... The navigation keys does not light up and is not working, also it will not turn on wifi even though I flip the switch. But finally some developer is taking the time for A9!
Click to expand...
Click to collapse
Those issues are almost certainly because of the kernel. Post your boot.img from the stock firmware.
Sent from my SM-T280 using XDA-Developers mobile app

It is great that such a serious developer starts to work for a9 pro and there are results immediately. @ashyx is there any way to put somehow anyhow a910f firm into a9100?
thanks

ashyx said:
Those issues are almost certainly because of the kernel. Post your boot.img from the stock firmware.
Sent from my SM-T280 using XDA-Developers mobile app
Click to expand...
Click to collapse
I thought so as well, that is why we cannot crossflash the A910F firmware to A9100. Anyway here is the boot.img from A9100! Thank u once again!
Btw, beer incoming!

No way to use international kernel somehow for a9100?

Fail in flashing TWRP

Hi all I have face issue in my grand 2 7102 device. And issue is when try to flash TWRP Recovery with all 3 methods Odin flashify and flashable zip file and I try all methods but after flash TWRP recovery it's falil I mean it again put me in download mode.So any solution available then help me......

First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.

Sharma Manu said:
First Answer my few questions?
1. Your phone is able to boot in system or stuck in odin.
2. Tell me your Os version.
3. You are able to access stock recovery or not.
Click to expand...
Click to collapse
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.

mahu patel said:
CWM work perfectly for me now i am in Resurrection Remix marshmallow rom but before i am on stock 4.4.2 but when i flash twrp its not flashing all methods again put me in download mode again that's all.
Click to expand...
Click to collapse
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..

Sharma Manu said:
Sorry for My late reply:highfive: M little busy
Use this link to download recovery:-
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0?_e_pi_=7,PAGE_ID10,9134887488
And please say Thanks to aapav01 for his hard work use only odin flash file .tar personally this works for Me..
Click to expand...
Click to collapse
Man i told u before i tried these all exactly 3 type of file with 3 methods.

If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation

NYT_RootComm said:
If TWRP doesnt work, idk if this can help you. The last options is flash other recovery to remove this problem. Try philz and cwm (which is the same but philz is advanced). Tip: If one recovery doesnt work dont try it
PS: You have the same scenario like me on TWRP installation
Click to expand...
Click to collapse
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo

mahu patel said:
Ya know it i flash 10 CUSTOM rom before but mostly upcoming rom work with only twrp sooooo
Click to expand...
Click to collapse
Really? Crap, i have to change recovery.

NYT_RootComm said:
Really? Crap, i have to change recovery.
Click to expand...
Click to collapse
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change

mahu patel said:
No not at all u didn't need to change now wait some time if u need then change upcomung Nougat 7 version work with all type of recovery s so don't need to change
Click to expand...
Click to collapse
Typically root community is getting better and better everyday

NYT_RootComm said:
Typically root community is getting better and better everyday
Click to expand...
Click to collapse
Ya awesome progress.I am 100% sure it's better than manufacturer like samsung

I have same issue I tried many methods to flash twrp but everytime it fails cwm just work flawlessly but then I tried flashing twrp.img file with flashify and it works thanx

[TWRP 3.1.0-3] [Lenovo P2] [p2a42] [Unofficial]

Hey guys
I already find way to compile to the latest twrp 3.1.0-3 unofficially, to fix some existing bugs in previous version twrp both official or unofficial, like in prevous twrp, if you try to encrypt your data, you will getting alot trouble or imposible to decrypt and enter and access data user again.
Bug fixs:
Encryption,
Decryption,
Aroma installer,
All are fully working properly
Flash with previous twrp recovery or by fastboot
How to flash:
https://www.xda-developers.com/how-to-install-twrp/
Unofficial-materialized-twrp-3.1.0-0-p2a42:
Updated on: 29/4/2017
https://mega.nz/#!rAQ2CCjS!lCzt34NzyVz1ZK7Gbg9zdJ0NVQ3udV2tekkWCxJ18AY
Unofficial-twrp-3.1.0-0-p2a42:
Updated on: 5/5/2017
https://mega.nz/#!XRQ2WbrD!tI4NuiZPDaIdXOvh1XEWDTt2Wp4We-9jHtTObyrSUuk
Unofficial-twrp-3.1.0-3-p2a42:
Updated on: 7/5/2017
https://mega.nz/#!DB4mCI4B!6qNmiPCa9RYz0O6qyumcKM-DzJip2gGcXOk93oX0IfU
Thanks to:
@teamwin
@celoxocis

Credit to: twrp team
Click to expand...
Click to collapse
Tried to flash it but I'm stuck on 3.0.3.0.
UPDATE: somehow sometimes my P2 boots version 3.0.2.0 and sometimes 3.0.3.0, but how?

ilmervanhattem said:
Tried to flash it but I'm stuck on 3.0.3.0.
UPDATE: somehow sometimes my P2 boots version 3.0.2.0 and sometimes 3.0.3.0, but how?
Click to expand...
Click to collapse
Just enter to twrp recovery mode click install section, click install image section on right bottom side, and navigate to where is twrp img that you already downloaded, and thick button on recovery option (make sure not to choose wong section other than thick recovery button), then flashed, next restart to enter to boot recovery one again.

hendibudi said:
Just enter to twrp recovery mode click install section, click install image section on right bottom side, and navigate to where is twrp img that you already downloaded, and thick button on recovery option (make sure not to choose wong section other than thick recovery button), then flashed, next restart to enter to boot recovery one again.
Click to expand...
Click to collapse
That's exactly what I did, but didn't work. Guess I'll flash it with fastboot.

ilmervanhattem said:
That's exactly what I did, but didn't work. Guess I'll flash it with fastboot.
Click to expand...
Click to collapse
Yes you can, just rename the downloaded file to twrp.img

Thanks for this version! The other twrps indeed are not working with aroma installers.

911-Future_Maker said:
Thanks for this version! The other twrps indeed are not working with aroma installers.
Click to expand...
Click to collapse
Finally i just make latest twrp-3.1.0-0 unofficial for lenovo p2a42, fix bugs encryption and decryption

Nice OP!

hendibudi said:
Finally i just make latest twrp-3.1.0-0 unofficial for lenovo p2a42
Click to expand...
Click to collapse
Lol Congrats bro! :highfive: I'm using your deodexed rom and your twrp.

911-Future_Maker said:
Lol Congrats bro! :highfive: I'm using your deodexed rom and your twrp.
Click to expand...
Click to collapse
I already file deodexed rom for nougat, after examine still one bug there.

hendibudi said:
I already file deodexed rom for nougat, after examine only one bug there, so i doubt to upload.
Click to expand...
Click to collapse
Hell yeah! Thanks man!

For some reason I can't install the latest materialiazed 3.1.0.0 via the flash image in twrp. It installs, but the theme is the standard, not like in the screenshots. I didn't tried the fastboot method as I'm lazy.

Thanks bro.. i'll try this!!

hendibudi said:
Flash with previous twrp recovery or by fastboot
Click to expand...
Click to collapse
Maybe the question sounds stupid but why it is not allowed to flash update.zip ( TWRP inside ) with original Lenovo recovery ?

pabgar said:
Maybe the question sounds stupid but why it is not allowed to flash update.zip ( TWRP inside ) with original Lenovo recovery ?
Click to expand...
Click to collapse
Because the stock recovery sucks on all phones without exception.

Hai hendibudi i allready install your twrp
But when i enter twrp mode power + vol-/+
Its show lenovo recovery
Why or something wrong?

rudim12f said:
Hai hendibudi i allready install your twrp
But when i enter twrp mode power + vol-/+
Its show lenovo recovery
Why or something wrong?
Click to expand...
Click to collapse
sorry it's solved (before reboot system i have to reboot to recovery first)
but after that before entering twrp always shown pattern lock
please help and btw i used twrp 3.1.00
thanks before

rudim said:
sorry it's solved (before reboot system i have to reboot to recovery first)
but after that before entering twrp always shown pattern lock
please help and btw i used twrp 3.1.00
thanks before
Click to expand...
Click to collapse
To prevent twrp ask for code security, use second line when you wanna create security, if twrp ask code security, remove your security first and create new one like above

hendibudi said:
To prevent twrp ask for code security, use second line when you wanna create security, if twrp ask code security, remove your security first and create new one like above
Click to expand...
Click to collapse
thank you hendibudi its work
just one more try to root systemless not work for me also materialized not work still with old one
i want your suggestion for this

rudim said:
thank you hendibudi its work
just one more try to root systemless not work for me also materialized not work still with old one
i want your suggestion for this
Click to expand...
Click to collapse
Thanks, i updated the file you can download again for material theme