lenovo yoga2 10" - shuts down dolby digital - Thinkpad Tablet General

often occurs in mine tablet shuts down dolby digital - just shuts down
i must turn on, but from time to time again turn off
similarly with turn on/off sound during turn on/off tablet - function marks herself
i little speak english, but try write my problem
i loaded new system, but problem still is

Related

Auto screen off during phone calls?

Hello,
In the past I am sure that my display screen went off after a certain time during a phone call (saving on battery life). I have noticed recently that the screen stays on the whole time, regardless of call length. I have looked through all the settings I can think off, and can't seem to find one relevant to auto screen shut off during a call.
I have installed Pocket Bluetooth Tools and PocketZenPhone (previously I was using Myhonerofiles).
Is there a setting I am missing, or some software that I can use to have an auto screen shut off during a call.
Many thanks for any help.
The screen will not turn off if Bluetooth headset is being used.
Normally, the screen will not turn off if there is any serial port activity (like while connected through activesync)
Are you sure that in Settings/Backlight/Bttey Power: the "Turn Off Backlight" option is selected?, it should be selected to turn the device screen off after 30 seconds or so.
I use a car kit running on bluetooth, and the screen goes off after 30 seconds!
I've set both the power and the back light to go off after 1 minute. There is not normally a problem and the screen powers off ok, unless I'm on a call (with or without a bluetooth headset).
There is an option in JGUI Phone Profiles that does this.
If you no longer have it installed then you won't get that effect.
When I uninstalled Phone Profiles I missed the screen off option so much I reistalled it just for that.
Effan said:
The screen will not turn off if Bluetooth headset is being used.
Click to expand...
Click to collapse
mine does.
Effan said:
The screen will not turn off if Bluetooth headset is being used.
Normally, the screen will not turn off if there is any serial port activity (like while connected through activesync)
Click to expand...
Click to collapse
So does mine.
After installing Pocket Bluetooth Tools (PBT), my screen won't turn off while on call. If I do turn it off during a conversation, my bluetooth headset cuts out while the other person is still on the phone and won't be able to recover it until I hang up.
If I have the timer working for the PBT, then my autoshut off will work, but that's after I change the timer from 60 seconds to 10 seconds in the registry. If I disable the timer, the autoshut off will work. So if you don't want to play around with the registry, then I suggest leaving PBT timer on.
But either way, if the timer is on or off, during a call, it won't turn off automatically with PBT installed. I like PBT because I was able to quickly connect to my headset faster than the built-in MS Bluetooth Stack.
I guess its a case of balancing the use of Pocket Bluetooth tools with the power saving function of having an auto screen cut off during a call. I'm not sure what is more important to me just now.
I am reluctant to return to My Phone Profiles. I am really enjoying the latest version of PocketZenPhone. I think I will make a request to have autoscreen included in a future version. Who knows, I might get lucky!
Swiftcorp said:
I guess its a case of balancing the use of Pocket Bluetooth tools with the power saving function of having an auto screen cut off during a call. I'm not sure what is more important to me just now.
Click to expand...
Click to collapse
IF you have Pocket Bluetooth installed, then while on call, it will not automatically turned off. But if you turned it off manually, while on call, it will cut out from the bluetooth headset and I find no way to get it back yet.

Tasker app from the market.

Sorry guys found a previous thread in another forum.
http://forum.xda-developers.com/showthread.php?t=743861
Mods please delete.
I just bought the tasker app and figured I would let people know how its working for me, and to solicit suggestions for things I can do with it.
background:
Its a very good app that allows you to script the behavior of the phone based on a very large set of events or states.
My initial use:
As previously mentioned on this board the bluetooth streaming volume is not the loudest, so I always end up turning up the volume for bluetooth. Then when I plugin my headphones I destroy my eardrums.
So I setup a task that when I connect to my bluetooth car stereo, it automatically sets the volume to max and turns off wifi for good measure.
I have another task that when I plugin headphones, it sets the volume to 60% and opens the doubletwist music player.
Finally I setup the standard battery task so that when my battery gets to 20% it turns of all the GPS, wifi, and bluetooth radios, as well as dimming my screen.
Anyone else have this app and have something cool they have setup using it? I have heard of silent mode when the handset is placed flat facedown, which i thought was unique.
I have had it for a few days and am playing around with it. I have 2 tasks so far. First is to go to silent mode when face down. This is especially nice since I charge it overnight by my bed and don't want notifications (emails etc) waking me up so I have been just turning silent mode on at night and off in the morning. Sometime forgetting to turn on in the morning.
The 2nd task is to read the email sender and subject aloud when I am in the car and it is connected to my car stereo via bluetooth. I like the wifi off setting you did. I may do the same.
I also noticed that when listening to streaming through bluetooth with the wifi on but not connected to an ap, I get "skips" every once in awhile. Turning off wifi fixes it so I may set it to turn off wifi when streaming bluetooth audio.
Couple issues I have had. If the phone is in "standby" (pushing the power button) tasker won't go to silent mode. Also, I tried to make the screen go off when face down as well but it doesn't work. Apparently tasker can not turn the screen off but you are supposed to be able to change the timeout to as little as 7 seconds. I set that up but instead of the screen going off it just dims. Not sure of the issue.
I am interested in what others are doing so post the info.
I have two keyboards i really like in 2 different orientations.
Droid X keyboard:
its sweet autocorrections and large real estate makes it ideal for two thumb typing in landscape
swype:
slower than droid X keyboard in landscape, but in portrait, this is possibly the fastest/most accurate keyboard around.
I tried to set it up so that i could change my keyboards depending on the orientation, but i could not figure it out
im also for an app that turns your screen off with a timer (in the background). and have that work when you turn your screen downward./
any with either of these would be greatly appreciated.

[Q] Bluetooth turns off when not connected to anything? WP7/Mango

Hi all,
In recent weeks my bluetooth is turning off when it isn't being used. I only use it for hands free in the car and up until a few weeks ago it always stayed 'On' however now, once disconnected from the car radio, it turns off again.
If I turn it back on away from the car it will go to 'Off' shortly after turning it 'On'.
It's a touch annoying as it means I have to get in the car, turn the engine/radio on, unlock the phone, set bluetooth to 'On' every time I drive and want the phone on hands free.
When connected to the car radio, the bluetooth stays on without problem, so I am not entirely sure what is going on.
I have tried turning battery saver off, restarting the phone etc. but nothing has changed this behaviour.
Has anyone got any suggestions on what I can try next, I'm a bit stuck!
Thanks

[Q] Can my N7 completely turn off when power is disconnected?

hi all
like many others iv put my nexus 7 into the dash of my car. i was wondering if there is an app or way for my nexus to turn itself off when i turn the car off. iv figured out how to make the device turn on when power is restored to the device but still not sure how to turn the device off.
also would anyone know why when the nexus turns on, it immediately mutes itself? it is connected via 3.5mm jack 100% of the time and tasker opens up power amp but other then that i don't know what might be causing it. any help is appreciated on both issues
cheers
tittysprinklez
Tittysprinklez said:
hi all
like many others iv put my nexus 7 into the dash of my car. i was wondering if there is an app or way for my nexus to turn itself off when i turn the car off. iv figured out how to make the device turn on when power is restored to the device but still not sure how to turn the device off.
also would anyone know why when the nexus turns on, it immediately mutes itself? it is connected via 3.5mm jack 100% of the time and tasker opens up power amp but other then that i don't know what might be causing it. any help is appreciated on both issues
cheers
tittysprinklez
Click to expand...
Click to collapse
If you have tasker installed, create a state which is dependant on battery power - as an exit task tell the tablet to wait for 10 seconds, then call the misc->reboot action with type shutdown to turn the tablet off. The wait 10 seconds it to prevent it powering off when you are cranking the car...
If you just want to turn the screen off, not power the whole tablet down, there's a tasker action Display->System Lock which will turn the screen off..
You could also use tasker to change the system volume for you if you needed as a workaround...
*edit* - BTW - the tasker reboot options don't gracefully reboot / shutdown, so if you have apps running, there's a chance that you may lose data. To do a 'graceful' reboot / shutdown, you are better off using the secure setting plugin...

Bluetooth disconnects when screen off

Having searched the forum I think this is an old topic with no real solution, however...
When I connected my P8 Lite (B612 Marshmallow) to my bluetooth speaker (Anker) it works well until the screen switches off, at which point it doesn't fully disconnect, but inhibits the signal, making audio unlistenable. The very moment I turn the screen on (while the phone is on the lock screen and I haven't yet entered my passcode) it goes back to functioning properly.
Is there a fix for this? Is there a bluetooth "process" that is being stopped when the screen is off? If so, how do I stop that happening? Thanks!
Am I the only one? ?

Categories

Resources