Related
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Jinen_A said:
Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile... I cannot find a dedicated forum for Meizu MX4 pro, only Meizu MX... i will try to post it there too, but if there is a better link please let me know...
Thanks,
Jinen
Click to expand...
Click to collapse
Which your flyme version A o I? Do you remember the version that you have before flash? Try flash With 4.2.8.2(With the correct version A or I) good luck
Sent from my MX4 using Tapatalk
I have same problem.
javimad86 said:
same problem! did you solve it? and even if i wanna clear data a screen with the unblock numbers appears and when i write my code i can't because there is just like 1 point every time i click instead 4 points so i must to restart again and the globe rotate again and system upgrade is always corrupt doesn't matter which firmware old or the latest... :S
Click to expand...
Click to collapse
I have some problem with you, after I upgrade Firmware International to China. Before I don't now what firmware I use, I just follow step at internet tutorial upgrade Flyme OS, and I have wrong download firmware China. After that while I want to upgrade again the PIN password just can click only one number even though my PIN is 6 number. So while I click the first PIN the Command saya "Password is Wrong".
What I have to do please help me about this problem ...?
If your on (I) International download (I) version if your on (C) China download and so fourth. I found this site and it has worked for me https://www.flyme.cn/firmwarelist-7.html By the way Beta will never work on the Chinese model since they went with the only 3 traditional firmware upgrades for outside actual China itself! Hope this helps it owrked for me and I am on the Chinese model.
So a while back I rooted my Huawei P8Lite ALE-UL00 (China) and it took a while but it worked out great. Then a few weeks ago I was sick and browsing on my phone when I got a notification from EMUI telling me to update. Being the stupid kid I am I did it. And then it would show the Huawei logo on and on and on. Destined to fix it went to the forums to fix it. did ADB and Fastboot, nothing. Except more problems. Now when I turn it on it directly says this:
RESCUE MODE
Attention!
Please update systems again
Update Use Guide:
--- Android Logo ---
Error!
Func NO : 10 (boot image!)
Func NO: 2 (load failed!)
you can simply flash it by fast boot mod, flash the rom version UL-00-C00-B220
which update version did you got ??
Yes , you need fastboot b220 . Later OTA b230
You could try to only flash the boot.img via adb.
One Problem
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Pricklybob said:
I cannot fastboot it, it doesnt take me out of that screen, on my computer it says waiting for device, if i type fastboot devices it doesnt show up. Any other ideas?
Click to expand...
Click to collapse
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
important
how are you guys
my device huawei p8 lite ALE-L21
I updated my phone to Android Marshmallow and I did not like it
The model number by details is >> ALE-L21C432B550
I WANT to comeback to android lollipop how can i do that
please help me my friends
Problem
ya.husein said:
Well, first try again and dont forget to close hisuite it does that problem.
If it didint work, turn your device off then hold down volume down button and after 3-4 seconds connect your device to computer via a USB cable it should access you to the bootloader then flash the firmware manually.
Click to expand...
Click to collapse
Tried that, didnt let me work...
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..
ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"
o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".
ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!
I am still in the same situation... Anyone who knows what to do?
ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry
I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.
Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?
try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok
Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device
Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .???
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Ta-1000 rom mdl: D1C-331A-0-00CN-A01.7.1.nb0
MENA ROM MODEL: PLE-3320-0-00WW-A02.nb0
When it shows "no command" press power button and volume up, then immediately release volume up button. There is a chance you'll get into recovery and from there you can put your phone into "download" mode, so OST LA will detect it.
P.S. A bit dumb idea to do risky experiments with a daily driver.
ziaur786 said:
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Click to expand...
Click to collapse
Dear brother, i would like to suggest you one thing, I not 100% sure but it might help you, follow these steps
Please read the instructions very carefully
also make sure you have all driver and framework properly installed
1. Download the TA-1000 Firmware from here
2. Then open your OST tool.
3. When you select the firmware on OST tool, after that it will prompt you to connect your device
4. Just do not do anything, keep patience, turn off your device properly and then connect to the computer. It will directly boot into download mode.
done, rest of the steps are same as you flashed your device before.
Enjoy
hit the thanks button if you find this useful
happy flashing
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Is there anyone on the platform who knows on this issue?
Or it's just a platform of Ads?
oooooof, sounds like a harsh brick from some sort of malware downloaded into the device or your kids diddled with some kernel settings somehow
is your device running on qualcomm snapdragon? i have the fix for it in this site
but first try the update option on the recovery, might fix something
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
found some fix on a russian website, gonna translate it:
im gonna make a warning there off-script of the russian website, this is NOT guaranteed to work. if it doesnt, send it off for repairs.
what do you need to do this:
1 - fully charge the phone
2 - a working usb cable
3 - a computer with wifi on it (i can tell you have it since you likely posted it on the computer)
4 -you should have Mi flash pro
5 - a recovery image on chinese (WARNING: 1.9 GB, BE PATIENT)
6 - actually working braincells and hands ( you guaranteedly have em)
THE STEPS:
1 - Load in mi flash pro and register in it under your name (not always under your name)
2 - press recovery
3 - you should see a lightning bolt icon along with the IMEI of your device
4 - type in the path of the firmware
even if your device shows your system has been destroyed you can still boot into recovery.
5 - in your device boot into recovery
6 - you see connect with mi assistant? choose that option and confirm it
your device should direct you to connect the usb from your computer to your device
7 - After you setup everything you should see your device, if not, press refresh device, then you should see the flash button, press it
8 - and there begins the magic - wait 5-10 mins for the firmware to initialise, DO NOT DISCONNECT THE USB FROM YOUR DEVICE AT THIS POINT, IF YOU DO, YOU WILL SCREW IT UP AND HAVE TO DO IT ALL OVER AGAIN!
if you dont screw up and your device actually boots congratualtions! the power of xi jing ping has restored your phone to normal with a small drawback - its all in chinese
worry not, it doesnt end here:
9 - Unlock the bootloader AKA Unlock OEM (This is important, because otherwise you will brick yourself again and will have to do it all over again)
10 - boot your device into fast boot and flash the global firmware onto your device (the global firmware can be found on the same xiaomiui website you got the chinese firmware from)
i hope this lengthy guide helps
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
crud, i forgot the critical part:
it doesnt boot you to the average xiaomi screen, its the A1 model
at this point you need to use the ADB to flash the chinese firmware and unlock the bootloader on the chinese firmware, then flash the global one
though you can still use the same method i typed above
How's the progress so far?
Lamntox said:
oooooof, sounds like a harsh brick from some sort of malware downloaded into the device or your kids diddled with some kernel settings somehow
is your device running on qualcomm snapdragon? i have the fix for it in this site
but first try the update option on the recovery, might fix something
Click to expand...
Click to collapse
I tried recovery also try to format the disc with recovery mode(power on + Volume up ) but then it stuck on the formatting disc... line
arshad4u said:
I tried recovery also try to format the disc with recovery mode(power on + Volume up ) but then it stuck on the formatting disc... line
Click to expand...
Click to collapse
Yup, the device is probs bricked
Have you tried the other methods i described?
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
Hi i dont have that kind of a problem!
my problem is when i try to do oem unlock it says error 0x1002 and idk what to do (i have same phone btw) i tried anything but nothing works!