i have problem with install {rom}[with 6MP camera added]XPERIA S ICS CM9 ROM{26/7/12} {rom} it say error in xrecovery i wipe cache and devilk cache and full wipe and stil flash say error es2??? whats that mean please help me ????
zeyadhan said:
i have problem with install {rom}[with 6MP camera added]XPERIA S ICS CM9 ROM{26/7/12} {rom} it say error in xrecovery i wipe cache and devilk cache and full wipe and stil flash say error es2??? whats that mean please help me ????
Click to expand...
Click to collapse
firstly post in Question and answer section
and second that rom can only be flashed in cwm not xrecovery
Yeap, you have to use CWM, not xrecovery, lol
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
You may try reflashing OTA1, OTA2, OTA3, and OTA4. Make sure to wipe cache partition and to reboot after reflashing each OTA.
wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
follow this method its fast u need to reboot only once.
1st goto cwm clear cache and dalvik cache then flash ota1 dont reboot again clear cache and flash ota2 dont reboot again clear cache and flash ota3 dont reboot . now clear cache and dalvik cache and flash ota4 . reboot done.
wolfpacknwo said:
Hey guyz.
I installed yesterday OTA 5 from JellyBlast and it works like crap cause it is Beta.
I want to get back to 3.0.4 but i dont know how .
Any help would be apreciated.
Thanks.
Click to expand...
Click to collapse
Hey I am currently using ota5 (on Hyperion lol) there is no problem with it except for the buggy launcher ... so just change the launcher it that's all...
Hit thanks....
samir basnet said:
follow this method its fast u need to reboot only once.
1st goto cwm clear cache and dalvik cache then flash ota1 dont reboot again clear cache and flash ota2 dont reboot again clear cache and flash ota3 dont reboot . now clear cache and dalvik cache and flash ota4 . reboot done.
Click to expand...
Click to collapse
If u don't reboot..mount system is necessary after each reboot..
Flash each update n mount system..then again flash..
Better if u start flashing from the beginning..that is the rom..
_________________________________
Hit thanks if I helped..
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
have u wipe data/cache .
Sent from xda-app using smartphone
EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
He/She was right
Sent From My Samsung Galaxy Y s5360
Just flash via odin and flash the rom again
make full wipe
I have make full wipe... but the result still same... flash via odin first? better i use other rom... this hyperion9 is so complicated... btw i dont have pc to flash odin...
Lemon_Lime`s said:
have u wipe data/cache .
Sent from xda-app using smartphone
Click to expand...
Click to collapse
alredy done it... not working...
EpullSalvatrucha said:
alredy done it... not working...
Click to expand...
Click to collapse
To flash stock based rom is very easy just:
Go to Cwm
Wipe everything
Mount everything
Flash the rom file
Wipe everything again
Reboot
No no no
Only dont flash the patch u will boot up
myaservip said:
No no no
Only dont flash the patch u will boot up
Click to expand...
Click to collapse
Sorry sir... I dont understand... can you explain more and leave me the download link...
EpullSalvatrucha said:
Sorry sir... I dont understand... can you explain more and leave me the download link...
Click to expand...
Click to collapse
Basically you should always flash a custom ROM on a stock one,
so flash a stock samsung ROM (make sure there is no secured bootloader etc...)
then wipe and install, i always do that :good:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
shyamSGY said:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
EpullSalvatrucha said:
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
Click to expand...
Click to collapse
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
I mean the patch provided by carl dont flash it
Hyperion 9 stuck
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
PBakker said:
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
Click to expand...
Click to collapse
Maybe you can use hyperion ril fix...
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
Yes... i not flash the patch... but its still not working...
marcussmith2626 said:
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
Click to expand...
Click to collapse
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
EpullSalvatrucha said:
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
Click to expand...
Click to collapse
you still need to mount system data cache after you have formatted it
you also need to be on a stock based kernel
9 time out of 10 if its not booting its due to user error
The only other thing that would stop it booting is an incompatible baseband but I assume you are on a recent one and therefore should have no problems
Hello,
I can't install anny apk files, my phone is rooted and I run the latest Carbon rom on my Nexus 4.
Also I have accepted that I can install any third apps in the secuirty menu..
Do you have any error message ?
Also try to wipe dalvik and cache.
blusydays said:
Do you have any error message ?
Also try to wipe dalvik and cache.
Click to expand...
Click to collapse
No, it's only say that It can install the APK file..
I did clean the Dalvic and cache.
No problems solved.
blusydays said:
Do you have any error message ?
Also try to wipe dalvik and cache.
Click to expand...
Click to collapse
Yeah, I did it again.
And he is alive.
THANKS MAN! LOVEYOU!
My ***** is working now!
Thanks again my friend.
You're welcome
I have a weird issue with my N9005 (hlte). I just got it new and am still a little inexperienced with flashing it. Preblem occurs when flashing ANY CM12 based rom. Flashing works well with TWRP 2.8.5.0 but once Android booted just after enetring my PIN the display turns off and I can't do anything and have to hard reboot my phone. CM11 runs without any issues
I'd relly like to go for CM12 so any help will be appreciated.
LS.xD said:
I have a weird issue with my N9005 (hlte). I just got it new and am still a little inexperienced with flashing it. Preblem occurs when flashing ANY CM12 based rom. Flashing works well with TWRP 2.8.5.0 but once Android booted just after enetring my PIN the display turns off and I can't do anything and have to hard reboot my phone. CM11 runs without any issues
I'd relly like to go for CM12 so any help will be appreciated.
Click to expand...
Click to collapse
Did you wipe data and cache? After installation
kenny1991 said:
Did you wipe data and cache? After installation
Click to expand...
Click to collapse
I performed a full wipe before flashing. Any advantages wiping again, once flashed?
LS.xD said:
I performed a full wipe before flashing. Any advantages wiping again, once flashed?
Click to expand...
Click to collapse
If you read installation instructions from temasek it says clear dalvik and cache. For good measure. No full wipe after flash. Only cache and dalvik
If i full wipe my phone after flashing ... i got no System at all ...
It looks like -> this <-
e1n3r said:
If i full wipe my phone after flashing ... i got no System at all ...
It looks like -> this <-
Click to expand...
Click to collapse
Lol
Haha I did correct myself and told you to not full wipe after flash. Only do that before flashing. Wipe dalvik cache and cache after flashing.
Do a clean install and try again. Full system, data wipe and caches in recovery. Use twrp doing that. Then flash and wipe cache and dalvik. Reboot. Use the latest build 8.7
kenny1991 said:
Lol
Haha I did correct myself and told you to not full wipe after flash. Only do that before flashing. Wipe dalvik cache and cache after flashing.
Do a clean install and try again. Full system, data wipe and caches in recovery. Use twrp doing that. Then flash and wipe cache and dalvik. Reboot. Use the latest build 8.7
Click to expand...
Click to collapse
Yes Sir thats the way i do any time look my Video there is no full wipe after Install only Cache, Dalvik (Factory reset)
greets