Hi to all. I buy the case of the title. The case came with a film protector for the back of the phone. Spigen suggest to put the film in the back to avoid scratches from this case. The point is that this film is blur and I loose the shiny effect of the color. So is it safe to remove the film protector? Can anyone confirm that the use of the case without the film is safe?
Thank you!!
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk
Related
Hello mates, i was wondering if lg g3 has any factory screen protector like sony z1-z2 because i have its like one week and now without doing anything it has a small scratch on screen, any1 knows anything??
Sent from my LG-D855 using XDA Premium 4 mobile app
No it doesn't, im running mine naked and have no scratches so far (fingers crossed)
Sent from my LG-D855 using Tapatalk
Mine have one. Maybe not the best one but until I get my nillkin glass one it gonna do the job. And got one with my melkco tpu case. On the top, right side there is a small tab to remove it.
Sent from my LG-D852 using XDA Free mobile app
Keys destroy any screen
Note 3 rooted knox 1, my last Samsuck crap. I want freedom. Stay away from Samsuck!
My screen protector is ok but I think I missed some feeling in functionality
Στάλθηκε από το LG-D855 μου χρησιμοποιώντας Tapatalk
I think the OP is asking if the G3 comes from the factory with a screen protector on it like the anti shatter protector on the Sony Z and Z1
To the OP, no it doesn't come with one from factory.
Mine came with a screen protector from canada
From Lg G3 "the beast"
samakos said:
Hello mates, i was wondering if lg g3 has any factory screen protector like sony z1-z2 because i have its like one week and now without doing anything it has a small scratch on screen, any1 knows anything??
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The device is provided with a Corning Gorilla Glass 3 glass protection.
If you scratched it although that protection you better had then to apply a tempered glass like i.e iCarez or Ultimate Shield instead!
Sent from my Samsung Galaxy Tab Pro 10.1
mathsmart said:
Mine came with a screen protector from canada
From Lg G3 "the beast"
Click to expand...
Click to collapse
Was it new or second hand because the G3 shouldn't come with one.
I installed the iCarez 0.2mm tempered glass protector on mine. Cannot tell its there. The Verizon shipping plastic was getting rather chewed up.
It's very tough and easy to clean i say:good:
before mine got a replacement digitizer for dead pixels, it's always naked for a month.
in and out of jeans pocket countless time, no scratch at all:fingers-crossed:
and about factory screen protector, i think it doesn't have any. from the looks of "lg g3 drop test" in youtube
bogdan1980 said:
Keys destroy any screen
Note 3 rooted knox 1, my last Samsuck crap. I want freedom. Stay away from Samsuck!
Click to expand...
Click to collapse
keys destroy only the size case and back..it wouldnt destroy the screen...dust and sand like particle kill the screen..
gorilla glass is harder than steel..but if you wipe it with a little tiny sand/rock...you will see how it destroy the screen
trent999 said:
I installed the iCarez 0.2mm tempered glass protector on mine. Cannot tell its there. The Verizon shipping plastic was getting rather chewed up.
Click to expand...
Click to collapse
Too bad we European people can buy it from USA only (rather expensive when including also the Customs taxes...).
I can read only good words about it. :/
Sent from my Samsung Galaxy Tab Pro 10.1
Hey guys!
Just received my s7e (europe) and I was wondering if there is any protective plastic film on the camera and/or on the flash & heart rate sensor?
I have removed the plastic film on the back but the camera & sensor was not covered so I wasn't exactly sure if the rest was protected. On pure sight, there doesn't appear to be any protective film but I am not 100% sure (maybe on the flash/heart rate sensor though).
If there is a film, what is the best way of removing it? With a toothpick, ...?
Anyway, thanks for feedback!
My S6 last year had a think film over the heart rate/flash and I used my nail to remove it, it actually scratched it. Its very soft plastic over that (assuming its the same).
At mine there was no film on the camera or heart rate sensor, just on the front and back glass.
Sent from my SM-G935F using Tapatalk
VerSuZx said:
Hey guys!
Just received my s7e (europe) and I was wondering if there is any protective plastic film on the camera and/or on the flash & heart rate sensor?
I have removed the plastic film on the back but the camera & sensor was not covered so I wasn't exactly sure if the rest was protected. On pure sight, there doesn't appear to be any protective film but I am not 100% sure (maybe on the flash/heart rate sensor though).
If there is a film, what is the best way of removing it? With a toothpick, ...?
Anyway, thanks for feedback!
Click to expand...
Click to collapse
Don't think so this year. However, word of caution, the plastic covering the heart rate sensor is easily phone to scratches (assuming it's anything like the plastic on the S6). I've had by S7E for about a week and I already noticed a scratch. Ugh...
Sent from my SM-G935T using Tapatalk
The heart rate sensor in the Galaxy S6 scratched just by looking at it. Guess the S7 is the same.
I didn't notice any plastic film covering the camera lens.
I used a hammer to remove the plastic film on the heart rate sensor.
The screen is slightly shattered, but it is only noticeable if you look at it.
I recommend the use of a 9lb lump hammer, as a side benefit, it seemed to reduce the dimensions of my S7 Edge, making it easier to fit into my back pocket.
Can anyone suggest a good screen protector?
I have seen reports on that it actually has a plastic film. Mine has scratched already but I can't seem to be able to remove it.. If there is any to start with.. (I have the european version).
Mines scratched aswell. Hoping its a plastic cover thing.
Sent from my SM-G935F using Tapatalk
Theres no film on the camera and heart rate sensor of my european S7 Edge either
I just ordered some tempered glass camera protectors on ebay
Sent from my SM-G935F using Tapatalk
Also my sensor rate its scratched... I use a unicorn beetle pro case... It's impossible!
I am disappointed
Inviato dal mio SM-G935F utilizzando Tapatalk
Nikka93 said:
Also my sensor rate its scratched... I use a unicorn beetle pro case... It's impossible!
I am disappointed
Inviato dal mio SM-G935F utilizzando Tapatalk
Click to expand...
Click to collapse
I have a little scracth on my sensor too. Bit disappointing coz I take care of my phone alot and installed spigen neo crystal case.
Sent from my SM-G935F using XDA-Developers mobile app
Hi guys, i use a silicon cover on my phone, but the nasty dust arrives into the fissures of the cover. How can i clean it? Even the screen sometimes is veri dirty and the fingerprint on it are so hard to wipe.
turtuv said:
Hi guys, i use a silicon cover on my phone, but the nasty dust arrives into the fissures of the cover. How can i clean it? Even the screen sometimes is veri dirty and the fingerprint on it are so hard to wipe.
Click to expand...
Click to collapse
Rub the wax.
m3g5 said:
Rub the wax.
Click to expand...
Click to collapse
What? [emoji780] [emoji53]
Inviato dal mio SM-G935F utilizzando Tapatalk
Hi all, any one here having an issue with their tempered glass protector not fully adhering to their device?.. This https://youtu.be/iYmX8hXtXNI is what is happening to mine with a tempered glass protector on it... This is not a one off as I've put two different glass protectors on my device and they both do the same!.. Do you think I can send this back to either manufacturer/retailer for a replacement?..
Thanks for taking and replying ?
Sent from my HUAWEI VNS-L31 using Tapatalk
I had a similar problem several times in a few minutes I held squeezed with fingers on the screen and I think that helped. So far it is OK sometimes diverges but after 1-2 minutes holding is again stuck, we'll see how long
Afaik this is a common issue that is due to the fact that the edges of the screen are slightly rounded. Because of that, air gets between protector and screen.
Your best bet is to try another protector that is slightly smaller than the screen. Most P9 Lite protectors are designed so they do not cover 100% of the front because of this.
Schlengge said:
Afaik this is a common issue that is due to the fact that the edges of the screen are slightly rounded. Because of that, air gets between protector and screen.
Your best bet is to try another protector that is slightly smaller than the screen. Most P9 Lite protectors are designed so they do not cover 100% of the front because of this.
Click to expand...
Click to collapse
Or simply buy a 3mk glass protector. No bubbles at all.
Sent from my P9-Lite using Tapatalk
Doesn't the p9 lite comes with a factory applied screenprotector? I've read it on some other forums
Rylo said:
Doesn't the p9 lite comes with a factory applied screenprotector? I've read it on some other forums
Click to expand...
Click to collapse
Yes but that is just a simple foil. Not comparable with the protection that a good tempered glass provides.
The factory foil is doing well for me, but it is slowly getting some air bubbles on the sides after 5 months of use.
Would a foil hold better than glass on this device?
Sent from HUAWEI P9 lite via Tapatalk
I'm using spite glass protector... Wonderful!
Inviato dal mio HUAWEI VNS-L31 utilizzando Tapatalk
The problem isn't the screen per see, it's the screws that hold everything in place.
If you remove the back cover and slightly unscrew the 2 screws by the usb port (or other parts like the top) you will make the screen flat and the protector will fit just fine.
I've done that to my phone and the tempered glass protector fits perfectly now.
randhackr said:
The problem isn't the screen per see, it's the screws that hold everything in place.
If you remove the back cover and slightly unscrew the 2 screws by the usb port (or other parts like the top) you will make the screen flat and the protector will fit just fine.
I've done that to my phone and the tempered glass protector fits perfectly now.
Click to expand...
Click to collapse
Dude you are 100% right. And its simple 3 min fix. Just did mine and working excellent.
Thank you for that idea!
Just unscrewed 2 screws near USB port, and screen protector is 100% flat. No bubbles at all.
ljuba_dude said:
Dude you are 100% right. And its simple 3 min fix. Just did mine and working excellent.
Thank you for that idea!
Just unscrewed 2 screws near USB port, and screen protector is 100% flat. No bubbles at all.
Click to expand...
Click to collapse
The only thing that needs attention is the nfc antenna, you need to be careful with it. Sometimes it stays stuck to the battery other times it gets stuck in the plastic housing and it is easy to tear it.
Another side effect of this "mod" is that the glass is under less stress and is less prone to cracking on drops.
Hello,i need some assistance from anyone who might know if the front camera is inextricable for it's operation with proximity/light sensor functionality?
I have a J730 which had a bad fall and the light sensor together with front flash were dislodged from the motherboard.
The screen was suttered too obviously so when i replaced it, the front camera stopped working while showing an error.
Στάλθηκε από το ONEPLUS A5000 μου χρησιμοποιώντας Tapatalk
liveuptoit said:
Hello,i need some assistance from anyone who might know if the front camera is inextricable for it's operation with proximity/light sensor functionality?
I have a J730 which had a bad fall and the light sensor together with front flash were dislodged from the motherboard.
The screen was suttered too obviously so when i replaced it, the front camera stopped working while showing an error.
Στάλθηκε από το ONEPLUS A5000 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Thank you all in advance for your help!
Στάλθηκε από το ONEPLUS A5000 μου χρησιμοποιώντας Tapatalk