Database Users

9100 3G bricked, or something worse?

Hi, I'm a Newbie as You can see I will try to describe my problem. I have a qtek 9100, and I (being so dummy) flashed a wrong hard spl from another phone, (I don't know, from what phone, I just surfed google) and now the phone doesn't do anything, I tried to cold reset it but it didn't worked, I tried to push all the buttons and power it on, that didn't worked too can You suggest me something? its a 3G model, if You need more info, just ask, I will try to answer

could Anybody Help me?
Please

...heh....

Please provide more info about your phone. What's the exact model. If you look under the battery of your phone you can see the model.
I think that you mistaken something. There is not any 9100 3G model. At your phone is there a second camera?-

sorry I mixed up sthg.
it's a T-Mobile phone, it was CID-Unlocked, and i don't know exactly, but under the battery it's written that it's wiza200

Take a look at this guide & follow the steps one by one. I hope that this will work.
If this don't work & you are sure your device is CID unlocked you can try flashing T-mobile 2.26 (with a little search you will find it ).
T-mobile have saved my a-s a lot of times .-

sorry, but that didn't helped for me.
the phone is not responding to anything, it is like a brick
when i press the camera button and the on/off button, nothing happens, no boot loader screen at all

juliushas said:
sorry, but that didn't helped for me.
the phone is not responding to anything, it is like a brick
when i press the camera button and the on/off button, nothing happens, no boot loader screen at all
Click to expand...
Click to collapse
Are you sure your battery is not completely dead? Do you have the original 1.0A charger?

Yes, I'm sure about the Battery
I Don't have the original charger, but I test the Battery with another phone, and it works fine..
I flashed a Wrong SPL.. isn't that the problem? and I don't know how to bring it back

I don't have time to search it but you can search for ''jump start'' or ''kick start''. It is a way to start your Wizard with a similar problem as yours. Simply you connect a 9v or 12v (I don't remember) to your battery & then you put it in your phone & it starts.
As you can see I can't remember exactly what you must do. Search it. The exact instructions are in the forum .-

Sorry, That didn't worked for me too.
The phone is Dead..
and I need to Bring It Back to Life..

You still haven't provided enough specifics about what happened and is happening to your device. Do any lights come on? What specific rom did you flash it with? You are going to have to search through the past discussions. Don't lose heart - others have gone through a similar ordeal.

Well, at least you can still sell it for parts...
I'm sorry to hear about your mistake, but that's why there are so many warnings to read and read more before flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

So that's it?
It's a brick?
The light does shine, but just after many random pushes of on/off button, reset and camera button. sometimes ir shines for a long time, and sometimes for just a second.

and i don't remember which rom did I flashed..
it was a long time ago..

H-Jtag wouldn't help?

Phone never sleeps

Help me please.
Until today everything was fine, than, I can't put the phone to sleep.
When I press the end key it comes black and after 1 second turns on again at the lockscreen. I can't put it into sleep mode with the screen off.
Neither in battery or plugged in charger.
I dis a hard reset, installed new ROM (Artemis) and new radio but nothing can solve the problem.
Do someone know what's happening ?
Sorry about my english.
Thank you all.

Additional information
When i conect and disconect the power cable it returns to normal, everything ok until next boot. If i reboot, the problems begins again.

Probably the last option but a hard reset will likely cure it.

airwater9 said:
Probably the last option but a hard reset will likely cure it.
Click to expand...
Click to collapse
you need to open your eyes and read.

duque.walter said:
Help me please.
Until today everything was fine, than, I can't put the phone to sleep.
When I press the end key it comes black and after 1 second turns on again at the lockscreen. I can't put it into sleep mode with the screen off.
Neither in battery or plugged in charger.
I dis a hard reset, installed new ROM (Artemis) and new radio but nothing can solve the problem.
Do someone know what's happening ?
Sorry about my english.
Thank you all.
Click to expand...
Click to collapse
do you install any apps after the hard reset? of so which?

Try this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

No, after the hard reset nothing was installed.
The problem still exists even when I remove the sim and the SD.
But when I conect the power cabe (for a second) evererything is back to normal.

sounds like a hardware problem then.

M_T_M said:
Try this
Click to expand...
Click to collapse
hahahahha

i agree, its most likely a hardware problem

hi i had the same what i did i just change the song and come back as it was...

what do you mean by changed the song?

Can't boot to download mode, twrp, sytem and so on

Hi Guys, I need help, I cant boot my device, the blue led always on and cannot turn off the device.
I tried to look over the forum but I found nothing similar to my case.
first. I always have random freeze and rebooting, none of custom roms helps, then I try several kernels, none of it worked. I booted in safe mode, still the same. and I flash stock several times but still the same.
and yesterday, it turned off, wont booted or turned on at all, even button wont work, when I connected to charger, it wont show led, I guess my battery is the problem. then I shake my phone gently, finally it booted.
and this morning, it suddenly turn of to boot screen, I cant event enter recovery or download mode. try force restart several times but then it show s7edge boot screen then show the black scrren and red writing. now I cannot turn it off.
I tried to connect to smart switch, it recognized my device but stated that my device is not supported for initializing.
I cannot even connect it to charger.
Anybody please help me, before I take it back to service centre.
thanks in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

never saw that screen before and im a flash spycho, if ur under warranty better go to service center, maybe ull even get a replacement.

galarond said:
never saw that screen before and im a flash spycho, if ur under warranty better go to service center, maybe ull even get a replacement.
Click to expand...
Click to collapse
hi there, exactly, I never saw something like this before. I couldn't turn off. so I just leave it in cool room (16 degree celcius, air conditioned room) to prevent it over heating and explode ( lol I was scared lol)
and it just turn off, and I tried to enter download mode again, it worked, but lol when restarting it stuck and bootloop again (freeze at bootloop).
I guess I need to take it for service though, I am pretty much sure it has something to do with hardware

That's the Bootloader Exception BUG. Not really a bug, but defect. This error is shown when there are bad blocks on the flash nand chip. Some users had luck continuously trying to reboot to download mode. Others didn't. Either way it is a hardware defect. You better give it to service.

nitrous² said:
That's the Bootloader Exception BUG. Not really a bug, but defect. This error is shown when there are bad blocks on the flash nand chip. Some users had luck continuously trying to reboot to download mode. Others didn't. Either way it is a hardware defect. You better give it to service.
Click to expand...
Click to collapse
wow thanks a lot!!! I thought so, It must be hardware related issue. I will bring it to service center tomorrow.
appreciate a lot ^^

Perfect radius of blue on the screen after replacing battery and charging port

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I replaced the battery and the charging port and after putting it together a perfect radius of blue has formed on the right side of the screen. Touchscreen is still working just fine on the whole screen. Any suggestions for how to fix this? There isn't an cracks on the screen. Any suggestions? Is it possible I bent a pin on any of the ribbons? Could someone point out which ribbons go to the screen hardware? Maybe I can get a magnifying glass and figure out which ribbons needs replaced. Thanks for the help.

Can you upload a picture? I would be able to tell you the issue.

Bluemgt06 said:
Can you upload a picture? I would be able to tell you the issue.
Click to expand...
Click to collapse
Here is a link

Here is a picture of the problem.

Bluemgt06 said:
Can you upload a picture? I would be able to tell you the issue.
Click to expand...
Click to collapse
If you can't view those go to my Reddit post and view the picture there.
https://www.reddit.com/r/Nexus6P/comments/73a3ma/half_of_the_diameter_of_the_screen_is_blue_after/

bootloop
hi
After I received an update from Google nougat,The device enters to a bootloop.
After a few tries,The device came back to life. After new update to o version my device enters to a bootloop ,Did factory reset.
And nothing happened.The device heats up radically,And after a while appears on my screen no commend. Then the device back to work.I'm at a loss.What can I do the device enters to another bootloop
Thank you friends

yossi.33 said:
hi After I received an update from Google nougat,The device enters to a bootloop. After a few tries,The device came back to life. After new update to o version my device enters to a bootloop ,Did factory reset. And nothing happened.The device heats up radically,And after a while appears on my screen no commend. Then the device back to work.I'm at a loss.What can I do the device enters to another bootloop. Thank you friends
Click to expand...
Click to collapse
Go look in one of the many bootloop threads.... but not here- this thread is not related at all with the BLOD.

Ok, finally saw your photo. It does appear to be a cable issue, unfortunately it would likely be the screen cable in which case you would have to replace the entire screen to fix it.

v12xke said:
Go look in one of the many bootloop threads.... but not here- this thread is not related at all with the BLOD.
Click to expand...
Click to collapse
I apologize,I'm new here

Bluemgt06 said:
Ok, finally saw your photo. It does appear to be a cable issue, unfortunately it would likely be the screen cable in which case you would have to replace the entire screen to fix it.
Click to expand...
Click to collapse
The black cable that is only partially exposed on one end?

Not sure which one you're talking about. The one on the right of the motherboard that goes under the battery is for the LCD I would also check that no filters around the connection have been damaged.

Recon6483 said:
The black cable that is only partially exposed on one end?
Click to expand...
Click to collapse
I believe so.

Fingerprint Sensor Not Working

Hi guys, i have a big problem and i beg you guys to please help me out. I'm using s8 950F variant. The fingerprint sensor is not working. It shows "An error has occurred with the fingerprint sensor, if this message apears repeatedly please restart". I did everything i could. I dialed *#0*# and tried to test fingerprint sensor but i showed "fingerprint version: null" then i thought i should clear fingerprint app data. I went into settings>apps>system apps. But the offical fingerprint app was not found. Also tried safe mode.
Conclusion::::::
*#0*# test shows fingerprint version: null and the fingerprint app has also disappeared.

Same issue here.
Worked fine, then 5 minutes after same issue.
Did HArd reset but still the same thing.
Any help?

Dude i solved it.
Turned the phone Off
Then i "filliped" on the sensor.
Pushed with my thumbs at the approximative localisation where the sensor is connected.
Turned on the phone and Voilà

Ensky said:
Dude i solved it.
Turned the phone Off
Then i "filliped" on the sensor.
Pushed with my thumbs at the approximative localisation where the sensor is connected.
Turned on the phone and Voilà
Click to expand...
Click to collapse
I'd like to know more about this. What do you mean?

Sorry my english is not good.
When i say "fillip" i mean i hit the sensor with my finger.
Then i pressed the back of the phone with my thumbs a little hard where the sensor is approximatively connected.
And it worked.
I think "version null" is returned by the phone when it cannot find any sensor plugged. So it might be broken or unplugged.

Worked for me as well ?

Nice.
So the problem is physical and is present on many devices.

Fixed!!
Thanks so much for the tip! I have been searching for hours for a solution. Tried all of the tips on other sites. All trying to say it was a software issue. I am so glad I ran across this post!

I'm happy for you !
Maybe this post need to be on top so every people with that problem can find the solution.

I have exactly the same issues
I have exactly the same issues but I want to know exactly how u did the pressing on the back so that I can do for myself I av tried pressing randomly but I need an exact formula and even how long

Artsbyart said:
I have exactly the same issues but I want to know exactly how u did the pressing on the back so that I can do for myself I av tried pressing randomly but I need an exact formula and even how long
Click to expand...
Click to collapse
Look at this picture so you can see where exactly it's located:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://imgur.com/6jzKIqa

Thanksssss
Thanks guys it totally worked for me... I pressed it n boom fingerprint is working thanksss

Artsbyart said:
I have exactly the same issues but I want to know exactly how u did the pressing on the back so that I can do for myself I av tried pressing randomly but I need an exact formula and even how long
Click to expand...
Click to collapse
How does that even happen

kpwnApps said:
How does that even happen
Click to expand...
Click to collapse
I think it's because of falling too much

Note 8
I have a Note 8 and it fell from about 7 to 8 inches height and it's fingerprint stopped working ,i tried hard reset but it didn't work, can someone kindly guide me on where to press and what else to do to make it work