I have just got a HD2, and used activesync successfully for the last 2 days to sync contacts and load the HTC hotfixes from their web site. Today however, it has just stopped working. The phone connects (but takes a very long time) and starts the sync process, but then the progress bar doesn't move at all for ages or sometimes moves to about half way in 10 minutes but won't get any further.
Before the status bar starts moving and randomly during the sync process I get the message "A problem has occured with services.exe Please tell microsoft about this problem...." The status bar usually starts moving a little after sending this error report. I also get the message "A problem has occured with connmgr.exe...."
Trying to stop activesync freezes the device completely for several minutes but it usually frees eventually although I have had pull the battery a couple of times.
Occasionally when it does start I get the warning message "There has been a change made on your server that requires you to re-synchronize all items on your device. All changes made since your last successful sync will be lost. Do you wish to continue?" although I have made no changes whatsoever on the PC. I've never come across a message like this from activesync before on any other device.
Has anyone had these problems or have any idea how I can fix them?
Cheers
Do you have sync problems with 3G or with USB? It usually happens to me with USB.
Try this. At Settings|Wireless, turn off Direct Push. Turn off Data connection. Go to mail. Do a Menu|SendReceive. If it works, then go back to enable those two options. I have no idea why but this often works.
Unpluging the USB often makes it better.
delete profiles in actvie
sync tools->active sync
soft reset
sync again
Be happy
Sfr0g, how do I delete the profile? I can't find that option.
Cheers
I keep getting messages that this process has stopped unexpectedly after coming out of a locked screen. I think it is related to HTC Sync. I recently installed version 3 of HTC Sync on my PC. Any ideas on how to make it stop doing this? (see my signature for current ROM, etc.)
Lexus One said:
I keep getting messages that this process has stopped unexpectedly after coming out of a locked screen. I think it is related to HTC Sync. I recently installed version 3 of HTC Sync on my PC. Any ideas on how to make it stop doing this? (see my signature for current ROM, etc.)
Click to expand...
Click to collapse
Unfortunately I have been having the same issue with my HTC Desire. I have also installed HTC Sync 3(.0.5387 to be exact), and more often than not (but not EVERY time) I will get the "process com.fd.httpd" Force Close error. I also believe it is related to HTC Sync 3, as I don't remember 2.0 installing that .apk on my phone.
I notice it most when disconnecting my car charger, leaving Car Dock mode...or more specifically actually, when I turn my ignition off so that power is cut, but the USB plug is still connected.
I also use a program called "Tasker" which allows me to set conditions and execute actions upon events such as Charging (Y/N), Car Dock (Y/N), Time of Day, etc., and I'm not sure if this is also interfering. Do you also have Tasker installed by any chance? Seems that not many others are experiencing this issue, and while it's fairly annoying, it's still bearable as Android handles it quite well.
For what else it's worth, I'm using LeeDroid 1.9a, again, on a Desire.
Looking forward to hearing more about your setup, and anyone else who might be having this issue as well...
Cheers!
i lost this file :|
I keep having to reconnect my previously paired bluetooth devices, and I believe this started after upgrading to Marshmallow. Initially, my devices seemed to unpair infrequently, like maybe every 10-14 days. But now, for whatever reason, it is happening more frequently and sometimes daily.
After reading through the forums here and at AC, I thought it might be happening because I rename the devices after I pair them, but that didn't solve the problem when I stopped that.
After Marshmallow, Android Pay required a screen lock to use, which I never had done in the past, so I also enabled Smart Lock and set my paired bluetooth devices as trusted devices. I just disabled all of that (screen lock, android pay and smart lock) so I maybe that will solve the problem, but I suspect it won't.
Anybody have any ideas?
Hi,
I have the exact same issue!
VEry annoying!
Clearing, hard reseting, repairing etc... tried EVERYTHING!
Now i also set smart lock and trusted devices.. Will go to a meeting and back, will test it on the way.
magdan83 said:
Hi,
I have the exact same issue!
VEry annoying!
Clearing, hard reseting, repairing etc... tried EVERYTHING!
Now i also set smart lock and trusted devices.. Will go to a meeting and back, will test it on the way.
Click to expand...
Click to collapse
Well, that didn't work for me. I also tried clearing the cache from the boot menu, but it's still dropping my paired BT devices.
My new Square Up Contactless + Chip credit card reader arrived yesterday. Unlike their previous credit card readers that connect through the earphone jack, this one connects through BT. I cannot get it to connect to my XPE, but am able to connect it to my Moto X 2nd Gen.
I really hope this is a Marshmallow issue that will be fixed soon, but the lack of responses has me concerned that it won't.
I tried resetting the network settings and wiping the cache, neither of which fixed it. I decided it was time to do a full factory reset, but that didn't fix it either. Any other ideas?
I going to assume you are unrooted... But either way if you can change your SELinux to permissive that might help your Bluetooth issue there is this app here that might help out
https://www.dropbox.com/s/xdllg9xxodnib77/com.mrbimc.selinux_42.apk?dl=0
Sent from my XT1575 using Tapatalk
Got the new phone from Motorola a couple of days ago. After reinstalling all my apps and customizations, including renaming my device and the 4 Bluetooth device I connect to, I started to experience the same problem. Not initially, but soon after I turned on the new System UI Tweak option.
So, I turned off the feature and it hasn't happened since. It has been a few days and I have restart (soft reset) several times, which I found would usually trigger the loss of pairing, so I'm keeping my fingers crossed that it was related to the UI tweaker.
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
mozza54 said:
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
Click to expand...
Click to collapse
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
I guess we need wait when official mm build shows up on Nvidia home page and then just clean install through fastboot. P.s. ...I have kind of weird lags with remote control, when I start using/presing buttons constantly - volume level goes up and down randomly, and also found even random woke ups from sleep.
Izsūtīts no manas Nokia 3310 используя бесплатную xda app
I have three nVidia Shield 16GB versions and the one attached to a receiver gives me the "Unfortunately, NVIDIA HDMI Services has stopped." message every time I wake it from sleep (which you can click OK, but it immediately respawns). As was stated, the only option is to pull the plug. The other two don't have this issue and I'm wondering if it has something to do with being attached to a receiver. I've had zero issues until the 6.0 update.
stazna01 said:
I have three nVidia Shield 16GB versions and the one attached to a receiver gives me the "Unfortunately, NVIDIA HDMI Services has stopped." message every time I wake it from sleep (which you can click OK, but it immediately respawns). As was stated, the only option is to pull the plug. The other two don't have this issue and I'm wondering if it has something to do with being attached to a receiver. I've had zero issues until the 6.0 update.
Click to expand...
Click to collapse
I have a 16GB Nvidia Shield TV plugged directly into my Sony 4K television. Since the 3.0 firmware/Marshmallow update, I am getting the same "Nvidia HDMI Services have stopped" error as described above. And yes, pulling the plug is the only solution.
Yup. Mine is plugged into a Sony receiver. The irony is that this build was supposed to include a bug fix that people with Denon receivers were having. Well if they fixed that issue they apparently broke the rest of us! Face Palm
I have 2 shields, the one connected to a 4k TV has the HDMI service problem and the one on a 1080p TV don't. I switched both and problems persisted on the 4k TV.
I don't pull the plug to reboot. I just hold back to make the power menu open. I press OK and spam the down button to get on the reboot option and the just spam the OK button for the reboot.
Very annoyed by this.
Contacted Nvidia support about this "HDMI services have stopped" issue: useless. They just provided a generic power cycle/ reboot troubleshooting procedure...which didn't work anyway.
Sent from my Nexus 6P using Tapatalk
same here
mozza54 said:
I Got the update through a couple of days ago and I've had nothing but trouble since, lots of force quitting and locking up, the console has reset itself a few times as well.
I use the Shield with a 64gb Micro SD and a 500gb external Hard drive, I set the SD Card to act as internal storage, the setup worked fine but the Shield started to lock up so I took that out which fixed the issue. I did a factory reset on the console at this point as well.
Ive been able to setup the Sheild using the Hard Drive or SD Card as internal storage, that seems ok but at the minute the Google Play store wont stop Crashing. First thing I did after the restore was make sure the bundled apps were up to date, this I can do just fine but if I try to go into any app to download it to the console, I just get the 'Unfortunately Google play has stopped' error and nothing happens.
Ive tried resetting the console, clearing the cache on the store, trying the store before I update any bundled apps.. nothing works. The apps installed on there are fine but I cant add anything new.
Is anybody else having similar issues?
Click to expand...
Click to collapse
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
I have the HDMI issue upon waking from sleep, going through a Yamaha surround amplifier. Never had the issue before update. I also cannot do anything with the play store, selecting anything in the store brings up the unfortunately plat store has stopped. Called Nvidia and spoke to tech there, no help thus far, we have a thread in the nvidia forums about the play store. Called google, and they refused to even speak to me because they say it's a manufacturer's problem. Please report to our forum at the nvidia site, there are many of us there and we have tried almost everything to no avail.
Here's the link to the Nvidia forum. https://forums.geforce.com/default/...le-play-store-not-working-with-new-update-/9/
So this Nvidia Shield TV v3.0 firmware/6.0 Android update when about as bad as possible short of bricking everyone's box.
So far I'm seeing in the forums from other owners:
New "Nvidia HDMI Services Have Stopped" error message that can only be addressed by power-cycling
Shield not powering on from Sleep
Google Play Store broken/crashing
Shield controller mis-behaving
Netflix app dropping frames during playback.
Various issues with storage
And I'm sure many others I'm not aware of.
This has been compounded by the Kodi v16 update that just came out and broke 4K playback which is now being resized to HD resolutions.
I have not had any problems with my shield and this update. But must admit that I have not used it that much since the update.
Btw. As far as I can read on the Nvidia shield forum, choosing an SDcard as internal storage, will overwrite use of the internal storage for apps and games.
All the same problems on mine as well. Wish I didn't update!
16g model. I have not had any power cycling or app crashing or services stopped issues. But once again, they've clearly changed how bluetooth works, because sixaxis is currently non functional, which I loathe. Ever since the console came out, the DS4 controller has worked better than Nvidia's own controller, regardless of previous bluetooth issues. Makes me wonder if Nvidia targeted it for convenience.
I have an Android TV Shield (v3.0) which is connected via an amp Denon April-x4100w (hdmi back cover). The first day everything was fine, the second day more image. I tried restarting the shield, reset the amp, turn off the upscaling of the amp, change the video frequency .... do you have a solution???
"NVIDIA HDMI Service stopped" (NVIDIA HDMI Service wurde beendet"
gPhunk said:
I am having an issue when it wakes after sleeping, I get a message saying Nvidia HDMI Services has stopped working. If you click OK, it just shows the message over and over. The only way to get out of it, is to pull the power cord and reboot. Didn't have the issue until I upgraded to 6.0
Click to expand...
Click to collapse
So to say, I am glad not being the only one having that big issue with the NSATV.
Since the update to FW 3.0 (Android 6.0), I often have the problem that I get the pop-up "NVIDIA HDMI Service stopped" (as my NSATV is set to German language it is "NVIDIA HDMI Service wurde beendet").
Even if I accept by clicking "OK", nothing changes. The pop-up doesn´t disappear and I can´t do anything else.
I need to plug-off from power to restart it completely.
Any idea or workaround known?
May be it can be solved by using a different power-off or sleep-mode as before?
Appreciate any idea and help as it is not really amusing to plug-off the NSATV every time..
Dietmar
realcams said:
Since the update to FW 3.0 (Android 6.0), I often have the problem that I get the pop-up "NVIDIA HDMI Service stopped" (as my NSATV is set to German language it is "NVIDIA HDMI Service wurde beendet").
Even if I accept by clicking "OK", nothing changes. The pop-up doesn´t disappear and I can´t do anything else.
I need to plug-off from power to restart it completely.
Any idea or workaround known?
Click to expand...
Click to collapse
I'm having this same exact issue, and have been for a couple weeks (since the update). I've even searched to see if there is some way to go back to the previous version. I don't have a nandroid backup or anything (wish I had thougth ahead), but does anyone know if there's a way to rollback to the Lollipop stock release (including any firmware/boot/etc)?
It will only crash HDMI if unit was sleeping. If you power off instead, it will not happen. Only caveat is that you can not wake the device with controller or remote and have to manually touch the shield unit and wait for the android to load. Not ideal but manageable.
My Shield TV is not usable anymore. Right after a reboot the desktop/home screen is freezing. The spinning circle while loading recommendations stops spinning and the Shield TV does not react to any input. Even the clock is not counting anymore. After about 5 minutes the Shield TV reboots itself (watchdog reset?). And again keeps freezing as soon as the home screen appears. This sucks.
I take it that the general consensus is not to upgrade to FW 3.0 whatsoever? I just received my Shield today, and I'm a little hesitant to even power it up
I have an Explorist Gen 4 that I've started having issues with. It's practically brand new although I hadn't used it for 6 months or so. I've got a Oppo Reno 2 running Android 10.
First issue is that touch seems to start having issues after the watch has been on for 30 mins or so. I can touch to wake it up, but then any touch/scrolling does not seem to register from then. If I restart it, all is normal again for a little while, so I think this is a software thing.
So I tried resetting the watch and reconnecting it to my phone, but it just won't connect any more. Most of the time the watch says it's connected, but the phone sits on popup showing the bluetooth pin.
Sometimes the watch gets stick on "Oppo would like to connect".
Sometimes the watch says connected and the watch is in the list of bluetooth devices, but wear os doesn't see it as connected.
The whole thing seems to be a mess.
Anyone seen any of this before, or have any ideas?
Edit:
OK, so I managed to get it to connect after messing about and adding it to bluetooth manually (which is not meant to work).
But the swipe/touch issue after a period of time is still an issue. It's pretty much only as good as a regular watch right now.