Database Users

Automated device/screen lock

I noticed there is device lock on today screen, however is there any tweak of the registry that can automatically enable device lock when the Tytn is powered off either timeout or by pressing the power button (besides using third party like mortsaver etc, behave like a nokia phone). Comments and help is very much appreciated. Thanks.

The way I do it is from Start-Settings-Lock. Check the box and set the time for zero minutes. When I press the power button, the device will lock right away. Otherwise it will lock by itself in a minute or two.
Hope that helps.

yvrRome said:
The way I do it is from Start-Settings-Lock. Check the box and set the time for zero minutes. When I press the power button, the device will lock right away. Otherwise it will lock by itself in a minute or two.
Hope that helps.
Click to expand...
Click to collapse
i like to have the today screen remains on, but screen locked let says 1 minute idle. The Start-Settings-Lock required password to unlock it and i found it troublesome while driving
Thanks.

Hmmm, can't help with that one... still new to PPC. But here's a free bump.

how about that:
http://forum.xda-developers.com/showthread.php?t=261277

JR_de said:
how about that:
http://forum.xda-developers.com/showthread.php?t=261277
Click to expand...
Click to collapse
Hi JR_de,
Thanks for the pointer, both threads you pointed to me work well on the Tytn, THANKS !

Locking the HD

Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks

I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while

If you push the hang off button for more than 10seconds, it will be locked

No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked

I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!

Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.

Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?

The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.

avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.

I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave

chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?

How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!

james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.

nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?

nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???

davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi

As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast

I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......

stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.

Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof

How to lock the screen by turning it off?

Hi, my typical procedure before putting the phone in the pocket is to hold right soft button to lock the screen and to switch off the screen with the power button. I wonder if there is a way to do it at once. You press the power button and screen goes off locked?
Thanks.s.

Install AutolockScreen 1.7 (I'm at work so don't have the cab with me, but if you search this site you'll find it. Install the cab and then go to Start\Settings\System\SmartLock and tick Suspend lock.

LockDevice works well...
http://www.1800pocketpc.com/2009/09...k-the-windows-mobile-screen-after-wakeup.html

Do either of these lock screen apps consume a lot of power?
I understand they have also been created with power saving feaures but what do they run like in a coarse of a day for instance, do they drain the battery quickly?
Thanks.

HD Tweak also has option for autolock when device turned off

Fallen Spartan said:
HD Tweak also has option for autolock when device turned off
Click to expand...
Click to collapse
It does but it has a problem with the background light not undimming after locking.

Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.

rpimps said:
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
Click to expand...
Click to collapse
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.

ClydeB1 said:
It does but it has a problem with the background light not undimming after locking.
Click to expand...
Click to collapse
My phone is set to quite dim anyway in Power settings so this doesn't affect me.......hence why I forgot about it
I've attached the cab which ClydeB1 was talking about, i.e. SmartLock 1.7

Mastoid said:
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
Click to expand...
Click to collapse
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?

rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)

rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
Fallen Spartan said:
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
Click to expand...
Click to collapse
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.

ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
True, yes, but I use Smartlock 1.7 so phone does lock

Fallen Spartan said:
True, yes, but I use Smartlock 1.7 so phone does lock
Click to expand...
Click to collapse
Was using your answer and expanding on it for explaining to rpimps

ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
Oh ok thanks for the info. Mine does unlock when I get a call/sms but I text a lot so I prefer it to do that, otherwise I'd be wasting a lot of time unlocking it every time I got a message.

Thanks for the hint ClydeB1 and thanks for the cab Fallen Spartan.
I tried SL 1.7 and there are three things, which I do not really like.
1. The phone returns to the very same screen where it was switched off. Some may consider it a pre. I prefer to see the clock when I switch it on.
2. The screen blink once when the phone is switchd on. I find it a bit irritating.
3. I do not see how I can uninstall it.
So, I wonder if you can undim the screen in HD Tweak by touching it or you need to do something extra?

You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.

ClydeB1 said:
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
Click to expand...
Click to collapse
The way I had activated the lock was by pressing and keeping pressure on the end call softkey, after a few seconds it vibrates and activates the lock. It comes on automatically when you put the screen off or restart the phone.
Regards.

Auto-lock screen
I'm running CLEAN ROM (B version) with SPB Mobile Shell.
Considering I don't want any superficial apps installed on my HD, I used HD Tweak and turned autolock on.
To get over the "background light not undimming after locking" problem, I initially unchecked "Automatically adjust backlight" under Settings > System > Power > Backlight and set at 100%. I also set the "Dim backlight on Device" when on battery power to the same time as "Turn off device if not used for". In my case that was 1 minute. I tested and this worked fine.
I then went back in and checked the "Automatically adjust backlight" checkbox.
I also performed the wake up with volume button reg edit making it easier to wake up device.
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
UPDATE:
Just tested again and I realised if you wake up device but don't unlock. The screen will automatically dim. Unfortunately if you unlock immediately after, the dim screen issue rears it's ugly head again. The only workaround at this point is to completely disable dim backlight.

Always-on OK Google not always turning on the screen

Always-on OK Google is awesome, but for some reason it only turns on the screen about half the time for me.
When it doesn't turn the screen on, it still listens and reacts to commands though, but without the screen on I can't see what it's doing so I still have to manually press the power button to turn on the screen to see the results, effectively defeating the purpose of having it always on (for hands-free operations).
Is anyone else experiencing the same issue? Is there a solution?

Did you turn on Smart lock for OK google?

chichu_9 said:
Did you turn on Smart lock for OK google?
Click to expand...
Click to collapse
I did turn on Smart Lock, with trusted devices, trusted places, trusted face and trusted voice enabled.

Yeah I see it... it seems a little buggy, but for me it *always* comes on if it is locked. Not so much when it is unlocked (just sleeping).
I set the screen to lock 5 seconds after screen sleeps.

Solutions Etcetera said:
Yeah I see it... it seems a little buggy, but for me it *always* comes on if it is locked. Not so much when it is unlocked (just sleeping).
I set the screen to lock 5 seconds after screen sleeps.
Click to expand...
Click to collapse
Thanks for the confirmation. Come to think of it I only started to notice this issue after I set the screen to lock 5 minutes after the screen sleeps. I'm now setting it to 1 minute instead to get a better compromise between OK-Google-ability and convenience of not having to unlock while I use the phone frequently.
Hopefully Google will come around to fix this obvious bug in the not-too-distant future too.

ydooby said:
Always-on OK Google is awesome, but for some reason it only turns on the screen about half the time for me.
When it doesn't turn the screen on, it still listens and reacts to commands though, but without the screen on I can't see what it's doing so I still have to manually press the power button to turn on the screen to see the results, effectively defeating the purpose of having it always on (for hands-free operations).
Is anyone else experiencing the same issue? Is there a solution?
Click to expand...
Click to collapse
do u have on tap enabled? cause I had the same issue and fixed it by disabling on tap.

valapsp said:
do u have on tap enabled? cause I had the same issue and fixed it by disabling on tap.
Click to expand...
Click to collapse
Seems to help. But still inconsistent.

How do I disable do not disturb?

Problem:
Phone in my pocket, volume down gets bumped into. The next 3 hours I won't get any notifications. This is incredibly annoying and frustrating.
How in the world can I disable volume down activating do not disturb while the screen is off?

First, the power button has to be bumped first, then the volume down button (various times). Too much bumping.

get a case

joooe said:
First, the power button has to be bumped first, then the volume down button (various times). Too much bumping.
Click to expand...
Click to collapse
The power button does not need to be bumped.
While the phone is sleeping (screen off + short wait), press volume down either once or twice and it will go into do not disturb mode. I can also put on full volume while it's sleeping as well.

Tried what you said. Doesn't happpen to me. Using stock rom.

joooe said:
Tried what you said. Doesn't happpen to me. Using stock rom.
Click to expand...
Click to collapse
Is mine defective?
I just let it sit for 10 minutes, pressed volume down twice and its on dnd. No power button touched.

cmg5461 said:
Is mine defective?
I just let it sit for 10 minutes, pressed volume down twice and its on dnd. No power button touched.
Click to expand...
Click to collapse
I restarted the phone and the issue hasn't come back yet. If/when it does I'll post again. Seems to be a weird bug

cmg5461 said:
I restarted the phone and the issue hasn't come back yet. If/when it does I'll post again. Seems to be a weird bug
Click to expand...
Click to collapse
Issue has just came back. Restarting the phone makes it go away. Seems like we have found a solution! I'll keep a log of how often this happens here.

cmg5461 said:
Issue has just came back. Restarting the phone makes it go away. Seems like we have found a solution! I'll keep a log of how often this happens here.
Click to expand...
Click to collapse
Which rom are you using? Is Double tap to Wake enabled? Are you using an app to lock the screen? Maybe that app is not locking the screen initially but displaying a black image for a short time before turning the display off.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Which rom are you using? Is Double tap to Wake enabled? Are you using an app to lock the screen? Maybe that app is not locking the screen initially but displaying a black image for a short time before turning the display off.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Stock rom.
Ambient display is disabled.
No App. It did this stock out of the box

RMA would be a better option.

Problem has come back! a week delay this time

I would love an option to disable it on the phone entirely I never use it anyway and it occasionally gets turned on by mistake and I end up missing calls.

Found this in another forum - change DND priority settings to allow calls and messages from anyone. Should fix it!