!! Before you start modifying your phone. Install the ze500cl .126 firmware first through stock recovery. Once that is done then you can unlock your bootloader and install TWRP and begin to flash ROMs. Just make a backup before you begin flashing!! Don't hesitate to reply in the thread if you get stuck during a procedure. Everyone was a noob once.
Beginners guide: http://forum.xda-developers.com/showthread.php?p=68298796
[1]
Bootloader unlock/relock THANK YOU!!! @CHuvaCK21 http://forum.xda-developers.com/showthread.php?p=66835940
[2]
TWRP 3.0.img http://forum.xda-developers.com/showthread.php?p=66865028 flash in fasboot, rename twrp download to twrpzf2e.img , boot into fastboot and enter command through adb:
fastboot flash recovery twrpzf2e.img
[3]
Stock .118 recovery.img
https://drive.google.com/file/d/0B_c2hdjSBKMALWZxUUxYRE1lWE0/view?usp=drivesdk
[4]
[ROM] RussiaNBeaR http://forum.xda-developers.com/showthread.php?p=66396562
Once flashed, it will say no os installed, reboot anyway.
[5]
[ROM] CM 12.1 unofficial http://forum.xda-developers.com/showthread.php?p=66980912
MIRROR: https://drive.google.com/file/d/0B_c2hdjSBKMAd0dIZlJwQWhlYlE/view?usp=drivesdk
[ROM] AICP --5.1.1 LP http://forum.xda-developers.com/showthread.php?p=68384432
[ROM] CM 13 [6.0.1] MM
http://forum.xda-developers.com/showthread.php?p=69759945
[ROM] Resurrection Remix [6.0.1]
https://yadi.sk/d/h4rNgOQz32QBDQ
[ROM] Resurrection Remix [OFFICIAL] [7.1.1]
https://forum.xda-developers.com/showthread.php?p=70976055
[ROM] Lineage Os 14.1 [7.1] http://forum.xda-developers.com/showthread.php?p=70012046
[ROM] Mokee Rom [7.1.1] https://download.mokeedev.com/?device=z00d
Gapps http://opengapps.org
Select: x86 - android version(5.1,6.0,7.1) -- pico
[6]
[Kernel] CM 12.1 kernel by @CHuvaCK21
http://forum.xda-developers.com/showthread.php?p=68065391
[7]
adb installer for your computer https://drive.google.com/file/d/0B_c2hdjSBKMAQnh5cm03eTFwNFU/view?usp=docslist_api
[8]
twrp tethered recovery https://drive.google.com/file/d/0B_c2hdjSBKMATVlhcUI5Q29HNjg/view?usp=docslist_api
[9]
supersu 2.71 https://drive.google.com/file/d/0B_c2hdjSBKMAeDN2RmJNVm9Ddms/view?usp=docslist_api
[10]
xposed[v.79 sdk21 x86]flashable + apk + zip uninstaller https://drive.google.com/file/d/0B_c2hdjSBKMARGFNSEVZN0JDVWM/view?usp=docslist_api
[11]
cmd.bat file for your computer. https://drive.google.com/file/d/0B_c2hdjSBKMAZmdsTmtxZVJtNFE/view?usp=drivesdk Put this file in the working folder on your computer that you will be adb/fastboot flashing from.
viper4android https://drive.google.com/file/d/0B_c2hdjSBKMAaFpGdmNiVkFIQUU/view?usp=docslist_api unzip install like normal apk
ViPER4android universal fix
http://forum.xda-developers.com/showthread.php?p=66397897
deep buffer remover (flash) https://drive.google.com/file/d/0B_c2hdjSBKMATWloV0oybG9ZQnM/view?usp=docslist_api helps v4a work better
asus stock firmware ze500cl www.asus.com/Phone/ZenFone_2_ZE500CL/HelpDesk_Download
How to install asus firmware http://forum.xda-developers.com/showthread.php?p=63479580 instead of using version 102 use 118, it's most recent. And i prefer twrp as it can read ext sd and cwm cannot
system app uninstaller https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Permissive Kernel thanks to @cidlover
http://forum.xda-developers.com/showthread.php?p=65638379
SElinux changer https://drive.google.com/file/d/0B_c2hdjSBKMAeEtFN3daeEdJZWc/view?usp=docslist_api
Normal emojis (galaxy s7 style)https://drive.google.com/file/d/0B_c2hdjSBKMARjdUaEZkSGh6eTg/view?usp=docslist_api with a root browser, go into system/fonts look for notocoloremoji.ttf and delete or rename with .bak, paste this one in its place and set permissions to rw-r-r and boom! No more scoop of butter emojis!
Caller id faker( just for kicks) https://drive.google.com/file/d/0B_c2hdjSBKMATG95MjVfcndSS28/view?usp=docslist_api do not let playstore update, if it does uninstall updates from app options
How to adjust screen density http://forum.xda-developers.com/showthread.php?p=60492075
material dark launcher http://forum.xda-developers.com/showthread.php?p=64784090 much lighter than zen launcher.
Quick tip: once you have flashed Asus stock firmware over the AT&T firmware you are now able to flash the Asus firmware through stock recovery just in case you do something and cannot get back into fastboot. Install a 4 way reboot app. This is with wanam for xposed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my zf2e[ze500cl] using Tapatalk
To root: you must install the ADB installer to your PC then run the twrp tethered recovery on your PC (type:ACCEPT , option 4 then T4) as well with your phone connected click launcher.bat and make sure to have super su.zip on your SD card and flash that zip file boom you are rooted
Sent from my zf2e[ze500cl] using Tapatalk
Safe debloat list, there were some apps that I could of deleted but I didn't and obviously if there is an app that you use don't delete it. I've even deleted the launcher and the messaging app and replace them with lighter ones.
As for any app pertaining to audio, v4a does everything, it works smoother. Just enable expert ui in v4a settings, you can fine tune everything. ??
To completely delete app remains. Remove the folders the app left behind in data/app, system/app, system/priv-app
Sent from my zf2e[ze500cl] using Tapatalk
Thanks you for everything in one place. Very helpful resources. But how to root
Simply enable usb debugging on your phone, run adb installer on your pc and connect your phone. Make sure to have supersu.zip on your sd card, Run launcher.bat from tethered twrp with your phone connected. Type accept then 4 then T4. Then on twrp on your phone, tap install, search for supersu.zip flash it. And you are rooted. Bypass everything else root this and that. Just flash super su. That is the whole point of rooting in the first place, to install supersu and grant root permissions for applications. I hope i helped.
Sent from my zf2e[ze500cl] using Tapatalk
So flash with custom recovery Super SU zip. And rooted okay so easy. Trying now. Thanks you @robot_head
---------- Post added at 12:26 AM ---------- Previous post was at 12:20 AM ----------
Yes it work so easy. And all file needed in 1 place. What custom ROM you suggest. Am so excited . :good:
I'm sorry no custom roms as of yet. Just stock, but xposed works great on this phone. Glad to hear you're rooted my friend??
Sent from my zf2e[ze500cl] using Tapatalk
Thanks for putting this together. I've been bookmarking like tons of different pages for when I get the unlock code for my phone, but this is SO much more convenient.
Working on a rom as of now, updater script is kicking my arse. Total noob at this.
Sent from my zf2e[ze500cl] using Tapatalk
robot_head said:
Working on a rom as of now, updater script is kicking my arse. Total noob at this.
Click to expand...
Click to collapse
What kind of ROM will it be? Fairly close to AOSP or a performance-oriented Stock ROM?
It will basically be exactly how I have my phone set up and be debloated. Xposed, stuff like that. It's an Asus rom .118 with as much Asus stuff I could take off. Even with changing the firmware on this phone its still locked down by AT&T. So that means no kernels, everything has to be based off stock or at least use a stock kernel to run
Sent from my zf2e[ze500cl] using Tapatalk
Sent from my zf2e[ze500cl] using Tapatalk
Carrier unlock
Does anyone tried to carrier-unlock this phone via the at&t unlock webpage?
I'm really interested in buy this phone, but I need it unlocked becoz I don't live in USA
ravb90 said:
Does anyone tried to carrier-unlock this phone via the at&t unlock webpage?
I'm really interested in buy this phone, but I need it unlocked becoz I don't live in USA
Click to expand...
Click to collapse
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
djole94hns said:
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
Click to expand...
Click to collapse
Only difference I could find between the two is that the 2E (AT&T Exclusive) has less storage and RAM. It's 8GB of storage vs 16GB and 1GB of RAM instead of 2GB.
HypnoticSilence said:
Only difference I could find between the two is that the 2E (AT&T Exclusive) has less storage and RAM. It's 8GB of storage vs 16GB and 1GB of RAM instead of 2GB.
Click to expand...
Click to collapse
You also can't unlock the bootloader on the AT&T variant, and you need to unlock it to flash custom recovery and custom ROMs.
Edit: actually, this might work: http://forum.xda-developers.com/zenfone2/help/zenfone-2e-root-rom-t3174135/post64716579#post64716579
Nope, i followed that, no success. Stupid network error, maybe if someone could decompile the unlock app and figure out the reason it won't unlock for the 2e. Maybe apatch with lucky patcher or some way to force it to unlock the bootloader without connecting to asus servers. Hmmmm
https://youtu.be/-6Dd8UZmd2M
Sent from my zf2e[ze500cl] using Tapatalk
djole94hns said:
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
Click to expand...
Click to collapse
The thing is, the AT&T variant is only 60$, that's why i'm asking :silly:
2e is a ok phone, i down graded to the lowest firmware 12.16.4.3 and it's much faster than 118. Super debloated, and init.d apk allows kernel auditor to work, so the phone feels faster thanks to @cidlover for the find. I almost considered a blu phone but development isn't what i thought it was, more than this phone though.
And no i haven't tried carrier unlock, maybe region lockaway by @Chainfire
Sent from my Z00D using Tapatalk
Ready for a rom
Related
Hi Guys:
Finally, I found it the best way to root firmware .266
******** Just for unlocked bootloader **********
Click to expand...
Click to collapse
The best way to solve the problem of "lack of management Ram
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dedicated to all of you: Special Thanks to my good friend @RuchRha :fingers-crossed:
1 - .266 firmware Central Europe will flash via Flash Tools on the your XSP.
2 - Using the advanced stock kernel from doomlord (flash it via QuickIMG) and flash the root app in recovery "supersu" app on your phone .
3 - The stock kernel of firmware .266 Click this link to download and flash it via QuickIMG (Download it at Attachment) [ The QuickIMG best tool for flah any Kernel with any Format! ]
4 - Download CWM And TWRP For XSP .266 zip file from this link and follow the manual steps.
extract the folder in .zip file to desktop and run install.bat you will have to enable usb debugging and need root for it
Click to expand...
Click to collapse
********* CWM and TWRP for Xperia SP with Locked Bootloader (Compatible with .266 firmware ) **********
Click to expand...
Click to collapse
Requiments:
4.1.2
Root
CWM
Flashtool
Download: .266 kernel
Purestockdeodex v2
Step1: booting cwm and flash(factory reset, wipe cache, advenced/wipe dalvik) purestockdeodex v2
Step2: flash supersu
Step3: advenced/power off
Step4: using flashtool and flash. 266 kernel
Use the CWM and TWRP for Xperia SP with Locked Bootloader that is compatible with firmware .266
To Install it:
Click to expand...
Click to collapse
1.) down CWM_SP_LB_4.3.zip file.
2.) unzip it on your desktop.
3.) go to the CWM SP folder
4.) run the install.bat file
5.) select option number 1 to install.
6.) stay tuned on the phone as it calls super user permissions.
7.) Read the directions to see that everything went well.
8.) If all went well you press a key to continue and depues press 3 to finish
Special Thanks to my good friend @RuchRha for CWM And TWRP For XSP .266 and stock kernel of firmware .266
Thanks to @DooMLoRD for advanced stock kernel
Thanks to @dssmex for CWM&TWRP for locked bootloader
Thanks to @jancsessz for Rooting method .266 fw for locked bootloader
If this post was helpful to you, press the thanks button :fingers-crossed:
Unlocked bootloaders only I believe..
mrjraider said:
Unlocked bootloaders only I believe..
Click to expand...
Click to collapse
Yes, The best way to root .266 only for Unlocked bootloaders
what the hell!!!
just do this
http://forum.xda-developers.com/showthread.php?t=2646193
ps:
loghme ro dore saret mipichoni??
ya naghi
Of course its for unlocked bootloader only. But. When U have it unlocked I dont see any sense to use stock kernel after all
A reason to use stock kernel is that the advanced kernel from doomlord has very poor ram management. A lot of users complaining about that. Thanks for the tutorial.
Sent from my C5303 using Tapatalk
didar2 said:
what the hell!!!
just do this
http://forum.xda-developers.com/showthread.php?t=2646193
ps:
loghme ro dore saret mipichoni??
ya naghi
Click to expand...
Click to collapse
If I took the train up to an hour to write it, because this have:
The main reason for this approach is that the only way to fix the problem "Ram management" is the same way.
luccasvr said:
A reason to use stock kernel is that the advanced kernel from doomlord has very poor ram management. A lot of users complaining about that. Thanks for the tutorial.
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Yes u got it! :good:, this is the main cause of this education.
You could also add in the thread if som1 is on .254 fimrware and rooted can take a backup of TA partition, then unlock bootloader and after following all steps restore TA and flash stock kernel, that's it locked bootloader with all DRM keys/TA partition present along with root and recovery's.
Edit : in 3rd step it's not needed to flash the stock kernel using fastboot, it can/should be flashed in flashmode.
I want this for LB!!!!
Enviado desde mi C5303 mediante Tapatalk
Sorry internet connection error
Amin.HVS said:
Hi Guys:
Finally, I found it the best way to root firmware .266
In this tutorial:
The best way to solve the problem of "lack of management Ram"
Dedicated to all of you: Special Thanks to my good friend @RuchRha :fingers-crossed:
1 - .266 firmware Central Europe will flash via Flash Tools on the your XSP.
2 - Using the advanced stock kernel from doomlord (flash it via fastboot) and flash the root app in recovery "supersu" app on your phone .
3 - The stock kernel of firmware .266 Click this link to download and flash on your phone via fastboot.
4 - Download CWM And TWRP For XSP .266 zip file from this link and follow the manual steps.
Special Thanks to my good friend @RuchRha for CWM And TWRP For XSP .266 and stock kernel of firmware .266 :fingers-crossed:
Thanks to DoomLord for advanced stock kernel
If this post was helpful to you, press the thanks button :fingers-crossed:
Click to expand...
Click to collapse
Step 3 should not be flashed in fastboot. or it will bricked your phone. use flash tool via flash mode since it is a tft file
You should modify the title of this topic and add [UB] cause it misleads people and make them believe that there is a working root for [LB]
update to. 266 while keeping root
Hi, I'm new to this, is there anyway to update to 4.3 without losing root? And if there isn't, is it possible to re-root on updated Xperia sp without unlocking the bootloader? Any help greatly appreciated...
monkeymind said:
Hi, I'm new to this, is there anyway to update to 4.3 without losing root? And if there isn't, is it possible to re-root on updated Xperia sp without unlocking the bootloader? Any help greatly appreciated...
Click to expand...
Click to collapse
Nope, you will surely lose root when you update but you still can gain root by following the OP. Works 100% though you will need to UNLOCK your BOOTLOADER to gain such permission. But you can relock later after installing SuperSU and its binaries if you 1st backup your TA partition
So instead of creating the obvious tutorials about how to root for UBL only it would be nice if you could find the way for LB.
Also this is more of a double thread since Doomlord has updated his CWM thread
RuchRha said:
You could also add in the thread if som1 is on .254 fimrware and rooted can take a backup of TA partition, then unlock bootloader and after following all steps restore TA and flash stock kernel, that's it locked bootloader with all DRM keys/TA partition present along with root and recovery's.
Edit : in 3rd step it's not needed to flash the stock kernel using fastboot, it can/should be flashed in flashmode.
Click to expand...
Click to collapse
Ok Bro!
Edit post #1 and best tool for flash kernel added. :good:
Verssetti said:
I want this for LB!!!!
Enviado desde mi C5303 mediante Tapatalk
Click to expand...
Click to collapse
Sorry! just for UB!
OP Updated!
QuickIMG tools is the best tool for flash any kernel added to post #1
Enjoy...
You put a [LB] tag in the title, and you say in the thread it is for unlocked bootloader only ...
update to 4.3 and root with locked bootloader
I'm new here! I can't unlock the bootloader. Am running rooted 4.1 on xperia sp. Could you put up a very simple step by step guide for doing the update and rooting. I've read through the thread and can't quite follow what to do. Have used flashtool for the original rooting process but apart from that am totally green I'm afraid...thanks in anticipation!
Elwino2.3 said:
When i try mount /system via cwm the log says "error mounting /system". How to fix this? Please help
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Anyone?
Sent from my C5303 using Tapatalk
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915* devices !!
I DO NOT SUPPORT THIS THREAD ANY LONGER, SO PLEASE FLASH AT YOUR OWN RISK AND DO NOT PM FOR HELP or Q&A
Click to expand...
Click to collapse
THIS THREAD IS JUST A REFERENCE & LINK TO CHAINFIRE'S WORK, NOTHING ELSE
THIS WILL VOID WARRANTY & SET KNOX COUNTER 0x1. THERE IS NO KNOWN METHOD TO ROOT WITHOUT TRIPPING KNOX !!
Repository of supported devices:
http://autoroot.chainfire.eu/
If your device is NOT SUPPORTED:
1. Download your deice firmware from sammobile.com or samsung-updates.com
2. Extract recovery.img
3. Post your recovery.img in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !! and ask him nicely to look into it
If your device has issues with CF-Auto Root method:
* If your device has a LOCKED BOOTLOADER, then you're out of luck. There is no known method to unlock.
* Post in Chainfire OFFICIAL CF-AUTO-ROOT THREAD !!
Official XDA CF-Auto-Root Thread:
PLEASE POST ALL QUERIES RELATED TO CF-AUTO ROOT TO THE BELOW OFFICIAL CF-AUTO-ROOT THREAD !!
http://forum.xda-developers.com/showthread.php?t=1980683
I have only personally tested SM-N915S model and confirm root working. I can not vouch for any other device models. Just make sure you have your full firmware package available to recover from a soft brick and read the thread before attempting to flash !!
Method used for my SM-N915S:
1. Advised: Have a full stock firmware package available (just in case of soft brick) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. DISABLE REACTIVATION LOCK: device settings > security > reactivation lock >> DISABLE (uncheck)
4. Flash via Odin [I used Odin3 v3.07 - attachment] as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
5. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
6. Open SuperSU app and update SU if prompted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet! So will this root the Sprint Note Edge successfully?
powerstroke said:
Sweet! So will this root the Sprint Note Edge successfully?
Click to expand...
Click to collapse
I will let you know in a few minutes.
Next1776 said:
I will let you know in a few minutes.
Click to expand...
Click to collapse
Ok, good luck and thank you. By the way, which Firmware are you on?
What? What ?
I noticed att edge listed on 1st post. I can root att edge? Anyone able to confirm?
Sorry, 915t. I thought t stands for att. It' for tmobile.
Root on Sprint SM915P.... CHECK !
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
powerstroke said:
Ok, good luck and thank you. By the way, which Firmware are you on?
Click to expand...
Click to collapse
NK1 Firmware
Next1776 said:
Okay, my Sprint SM915P phone is successfully rooted. It went down pretty much how it did in this thread : http://forum.xda-developers.com/note-edge/general/easy-steps-stock-odin-n915tuvu1anjl-sm-t2943993
I didn't install the SD card fix yet...have to check that out first.
I got the "FAIL" messsage after flashing the CF autoroot tar file, then I thought WTH, I'll see if the Tmobile variant process works, so I tried it, and it worked. I have rebooted several times and it seems ROOT is sticking. Recovery had a hard time finding the UPdate SU file for some reason, but I eventually did, and flashed it.
So, my recommendation is to flash the Chainfire Autoroot tar file for the Sprint variant first, then follow the thread I referenced above for the rest. Your results may be different, so buyer beware! Good luck.
Many Thanks to Chainfire and TEKHD , you guys rock!
Click to expand...
Click to collapse
Awesome thank you. I will give it a shot after work tonight. I am on the NK1 firmware as well.
Any users of the various device variants please inform others what's working and what's not with the official CF-Auto-Root method.
Freeeeedom! (on Sprint)
Does this also mean no more autoupdates? {knox tripped}
blackinjun said:
Does this also mean no more autoupdates? {knox tripped}
Click to expand...
Click to collapse
No be deal.
I always disable/remove update and use Odin to flash any stock ROM from sammobile.com or samsung-updates.com .
UpInTheAir said:
This is to announce that @Chainfire has kindly provided his CF-Auto-Root to support various Galaxy Note Edge SM-N915x devices !!
Current models supported:
SM-N915F
SM-N915G
SM-N915P (USA - Sprint)
SM-N915S (Korea - SKT)
SM-N915T (USA T-Mobile)
Download Here: >> CF-Auto-Root Repository
>> Official XDA CF-Auto-Root Thread <<
I have attached Odin3 v3.07 at the end of this post
Would recommend to donate to the CHAMPION of Root, or purchase SuperSU Pro or any other one of his wonderful apps
Root personally confirmed working for Samsung Galaxy Note Edge Exynos Korea SM-N915 "S" via the legend Chainfire CF-Auto-Root
WARNING : KNOX COUNTER WILL BE TRIPPED AND WARRANTY VOID - THERE IS NO CURRENTLY KNOWN METHOD TO RESET THE COUNTER OR ROOT WITHOUT TRIPPING KNOX !!
There is no need to elaborate too much on install instructions, they are found in his thread, website and all over the web
Method:
1. Advised: Have a full stock firmware package available (just in case) [sammobile.com or samsung-updates.com]
2. Have Samsung USB drivers installed on Windows PC (Easiest way is DL KIES from Samsung)
3. Flash via Odin [I used Odin3 v3.07 - attachment] in PDA, as per Chainfire's instructions !
** If unsure how to use Odin, there are many guides found by searching !
4. Wait around 30 secs after flash (stuck on boot screen), and hopefully device will boot.
5. Open SuperSU app and update SU if prompted
.
Click to expand...
Click to collapse
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
vongkachon said:
Can N9150 use this?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
As your device isn't yet listed in Chainfire's thread, I have no idea if any of the official CF-Auto-Root would be compatible. If you were to risk your device, you would look for a Snap Dragon one, but I would not recommend to those who can't afford the risk. EDIT: Without having the official stock firmware package available, I WOULD NOT TRY IT.
If your device isn't yet supported, maybe see if your firmware package is available at sammobile.com or samsung-updates.com , download and extract the recovery.img . Then upload the recovery.img to Chainfire's main XDA thread (link in OP) and ask nicely if he can spend the time to support your device I there is nothing, maybe contact one of those sites and politely request
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
leekslk said:
mmm, tried it on the N915G with the appropriate files being (CF-Auto-Root-tblte-tbltedt-smn915g) but no luck on rooting so far. Initially I thought it could be me being silly with drivers and ODIN versions, tried a few drivers and ODIN versions but same outcome. Was stuck at NAND: write failure after what appears to be an attempt to write in recovery, then cache, even after a few tries [being full disconnect,restart in download mode and re-flash]. No issues restoring to store firmware (N915GXXU1ANJ3_N915GXSA1ANJ3_N915GXXU1ANJ3_HOME.tar.md5) though.
Any tips guys?
Click to expand...
Click to collapse
You might want to drop a post in Chainfire main XDA thread to let him know it's not working. He seems really busy, so that's of he monitors that thread anymore.
Nothing official, there might be something unofficial using Note 4 method. There is always risk to remember though.
Probably dumb question: will this also reset the device?
wilbur4321 said:
Probably dumb question: will this also reset the device?
Click to expand...
Click to collapse
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
UpInTheAir said:
If you mean "factory" reset, no it won't. Knox counter is covered in OP.
Click to expand...
Click to collapse
Thanks. Not too worried about Knox. Hopefully that won't change after tmobile gets my note3 with Knox tripped back, though.
Does anyone have an extracted version of the SM-N915S rom? I was looking for few apks from that one. I installed some files from the TMO version on to my phone and it has messed up certain functions.
Thanks in advance!
H3G M7 Guru Reset Rom + File Collection
HTML:
In this thread I will be sharing my collection of file's for the HTC One M7 on H3G. All these files will be useful for returning to stock especially those with s-on. I hope someone finds them useful anyway [emoji14] All files in this thread are suitable for devices with the following CiD and MiD
Code:
modelid: PN0710000
cidnum: H3G__001
cidnum: H3G__106
cidnum: H3G__402
cidnum: H3G__G04
Guru Reset Rom Stock KitKat 6.14.771.2Guru_Reset_M7_H3G_6.14.771.2.zip MD5 :- 676e56aa7e5e725387b65dd14e322fba
Includes optional Stock Recovery, Stock Radio and Root.
Install with TWRP recovery like any other rom. (TWRP 2.6.3.3 Recommended)
OTA updates when available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to @crushalot www.htc1guru.com for the original aroma guru reset package.
Stock Nandroid BackupsKitKat 4.4.3 6.14.771.2 TWRP Nandroid MD5 :- 72c8152a8179fbd4cb2d2e5b8b35b905
Full Stock for OTA's
KitKat 4.4.2 5.12.771.3 TWRP Nandroid
Full Stock for OTA's
JellyBean 4.3 3.62.771.3 TWRP Nandroid
Pre-Rooted and missing Preload Data, Not suitable for taking OTA's
Firmware Zips 2.24.771.3.zip MD5:- a56305ea6570ee4ff656a4357171ce11
3.62.771.3.zip MD5:- ba684b5207d74e24075cd4b02ead3ba1
4.20.771.17.zip MD5:- d4fba9da51321b95741440b647bc9bee
5.12.771.3.zip MD5:- 64f0d0a23fb5468d669bb2f922043d9c
6.14.771.2.zip MD5:- 0dd432cbf3ddddcdd74ee669b44ee376
7.19.771.1.zip MD5:- 0ec86aefeadf7e3c0e37fafaa1192777
OTA Update ZipOTA_M7_UL_JB_50_SENSE5_H3G_UK_2.24.771.3-1.28.771.6_release_328027_signedlnazfd1l6874pvs8.zip MD5:- d1eecfce64c7847a2ee35a9e9be8ca95
OTA_M7_UL_JB43_SENSE55_MR_H3G_UK_3.62.771.2-2.24.771.3_release_338684cjuf0j4gm1ogoo4n.zip MD5:- c7798f585b4ff326a3b8bad083ba05ed
OTA_M7_UL_K44_SENSE55_MR_H3G_UK_4.20.771.17-3.62.771.3_release_3536491kghgv33dtz4m18n.zip MD5:- 583dae463ffdf61b337f7946ed9db01a
OTA_M7_UL_K44_SENSE60_MR_H3G_UK_5.12.771.3-4.20.771.17_release_37214948ro8l36c6yo7dhi.zip MD5:- 44a3956d277141886af7ebc60a072766
OTA_M7_UL_K443_SENSE60_MR_H3G_UK_6.14.771.2-5.12.771.3_release_387423qg91a2pgfo5cx9ic.zip MD5:- 3dca820e82014f04afba66b41735bba4
OTA_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1-6.14.771.2_release_420807iloxunzwjif4idfm.zip MD5:- 3dca820e82014f04afba66b41735bba4
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Black_Eyes said:
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Click to expand...
Click to collapse
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Danny201281 said:
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Click to expand...
Click to collapse
Thanks Again
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Sacrimony said:
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Click to expand...
Click to collapse
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Danny201281 said:
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Click to expand...
Click to collapse
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Sacrimony said:
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Danny201281 said:
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Click to expand...
Click to collapse
Ah that is fantastic! So everything I need is included in the guru zip? Man, one again you've been amazing. Thank you so much!
Sent from my HTC One using XDA Free mobile app
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app[/QUOTE]
Sacrimony said:
Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked.
Click to expand...
Click to collapse
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Click to expand...
Click to collapse
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Sacrimony said:
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Danny201281 said:
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Sacrimony said:
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Click to expand...
Click to collapse
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Danny201281 said:
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Click to expand...
Click to collapse
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Sacrimony said:
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Click to expand...
Click to collapse
Your welcome :good: it's better to get it right first time, than to try and fix it after it's gone wrong
It gets stuck at 10%.
GeoVali99 said:
It gets stuck at 10%.
Click to expand...
Click to collapse
Which recovery are you using?
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
GeoVali99 said:
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
Click to expand...
Click to collapse
Ok cool, for the record though installs getting stuck happens a lot with TWRP 2.8.X.X :good:
That's why I recommend 2.6.3.3 but glad you got sorted though. If youhavent checked recently h3g are pushing the update now
[Official Lollipop 5.1.1] P600 DOJ3 (Mega & Android File Host) Fast Link + Easy Root
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07 - Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
Rooting guide for 5.1.1 : http://forum.xda-developers.com/showthread.php?p=63637426
TWRP Link : https://dl.twrp.me/lt03wifiue/
[BETA][2015.10.10] SuperSU v2.52 - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Wanam Xposed Framework & App - http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
All credit goes to the People running the posts I linked. I didn't do anything but bring it together in one post to save you time running around cyberworld
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/showthread.php?p=63637426
Download only the P600 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Extra Features :
Note 5 Feature "Screen Off App" - http://forum.xda-developers.com/showthread.php?p=62731428
I don't know if this info is important to anyone but if someone wants it then here it is :
This info is from "About Device"
Model number
SM-P600
Android version
5.1.1
Kernel version
3.4.39-6086244
[email protected] #1
Fri Oct 23 17:24:00 KST 2015
Build number
LMY47X.P600XXUDOJ3
SE for Android status
Enforcing
SEPF_SM-P600_5.1.1_0039
Fri Oct 23 18:04:15 2015
KNOX version
KNOX 2.4.1
Standard SDK 5.4.1
Premium SDK 2.4.1
Customization SDK 2.4.0
Container 2.4.1
CEP 2.0.1
OTP 1.1.1
SE for Android 2.3.0
SSO 2.4.1
TIMA 3.0
VPN 2.2.0
Zionator said:
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07- Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
If you want root then there is a post here offering that ROOT : http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
Click to expand...
Click to collapse
Thank you. And did you root it successfully? I cannot flash a twrp.
What about region
Whats the difference if my region is not this and i update?
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
iopxiang said:
Thank you. And did you root it successfully? I cannot flash a twrp.
Click to expand...
Click to collapse
Not yet I will wait a few days to do anything as I just want to see how it works and the battery life on stock. Then I will root and remove many system bloatware apps and see the difference.
rbaleiro said:
Whats the difference if my region is not this and i update?
Click to expand...
Click to collapse
This is the Spanish region but I live in UK and at the very first setup screen I chose UK language so it don't really matter about the region as there is no modem. This device is just WiFi so region makes no difference.
chengineer said:
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
Click to expand...
Click to collapse
You are welcome. Well I flashed this over a custom rom Hyperdrive 4.4.2 and then once it booted I then factory reset it. Before I factory reset the device it was fine I just like the fresness of roms.
So the answer to your question is I don't know but I don't think it will make a difference as the bootloader is in the rom and will be flashed automatically with the rom. I came from 4.4.2 so I cannot speak about 4.3 but I assume it will be the same result.
Sent from my SM-N920C using Tapatalk
Thanks, Ill install too and see what happens!
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
rbaleiro said:
Thanks, Ill install too and see what happens!
Click to expand...
Click to collapse
You're welcome.
rbaleiro said:
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
Click to expand...
Click to collapse
Yes I have been waiting for this lollipop for ages now. Just hope someone cooks up a lovely custom rom soon ?
Sent from my SM-N920C using Tapatalk
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
Touch (as well as all other functions) works in twrp 2.8.6
Sent from my SM-P600 using XDA Free mobile app
I can't thank you enough. I flashed 5.1.1 yesterday and everything was working fine, but I was really missing root. I could NOT wrap my head around the root process as described in the other posts. Nothing against all their hard work, I'm just slow. Your step by step was so easy to follow! Now I'm rooted and happy. Thanks!!
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks. ☺
Will it work i have 5.0.1 one on my phone
countryboy1000000 said:
Will it work i have 5.0.1 one on my phone
Click to expand...
Click to collapse
Yes, it should, even you have custom rom.
---------- Post added at 06:02 PM ---------- Previous post was at 05:59 PM ----------
amey2606 said:
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Yes, factory reset is like you just brought the tablet from the store.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
You are welcome. I am glad you got it rooted. First thing I did was debloating like a mad man hehe.
Then exposed and now I am gonna try and find working themes for it ?
Sent from my SM-N666F "Special Edition"
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
MasK said:
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
Click to expand...
Click to collapse
Yes it will work if u download the 605 rom and then from root post download the modded boot image for 605 if available and last thing get TWRP for 605 as well.
Do as described in my guide and apart from what I said above the rest is universal meaning that supersu and closed are the same for all versions.
Sent from my SM-P600 using Tapatalk
for sm-p601
Can you please give a link for sm-p601 too
Zionator said:
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
Click to expand...
Click to collapse
as I held these three buttons, I watched as the Samsung note splash screen flickered and restarted over and over. I held for about 10 minute and gave up after my hands got tired. After that, I couldn't get past the splash screen and had to do a straight ROM via ODIN.....can I still root? What was I doing wrong??
I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 3.0.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
https://dl.twrp.me/quark/twrp-3.0.0-0-quark.img.html
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://download.cyanogenmod.org/?device=quark
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for CM 12.1 (https://www.androidfilehost.com/?w=files&flid=42109)
Optional: Download SuperSU for root (https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Flash SuperSU if you need root
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
All the links are here
http://forum.xda-developers.com/showthread.php?p=63956817
And here:
http://forum.xda-developers.com/showthread.php?p=63956441
Since I posted those, both CM and Resurrection Remix can be flashed on XT1254 with @baybutcher27 beta kernel found in those posts.
By tomorrow noon you can flash CM with it's own kernel, when the 11/28 nightly appears.
In those posts are also links for bootloader warning removal, Moto camera for CM, as well as 60fps custom bootloader animation.
ChazzMatt said:
All the links are here
http://forum.xda-developers.com/showthread.php?p=63956817
And here:
http://forum.xda-developers.com/showthread.php?p=63956441
Since I posted those, both CM and Resurrection Remix can be flashed on XT1254 with @baybutcher27 beta kernel found in those posts.
By tomorrow noon you can flash CM with it's own kernel, when the 11/28 nightly appears.
In those posts are also links for bootloader warning removal, Moto camera for CM, as well as 60fps custom bootloader animation.
Click to expand...
Click to collapse
Thankyou VERY much, updated OP, and im working on installing it myself right now for the guide.
bump for people looking for it
Just make sure you do this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
before flashing the new ROM + GAPPS + kernel.
I think this is why some people were getting system storage space errors. They had something else installed on their system before flashing new ROM and didn't wipe it clean first.
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/dro...e-location-t3259060/post64049328#post64049328
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
On the stock rom TWRP doesn't show my backups at all like it usually does but in TWRP it shows them there like it should. No idea why.
Edit: just saw post above, its there lol
INCREMENTAL said:
On the stock rom TWRP doesn't show my backups at all like it usually does but in TWRP it shows them there like it should. No idea why.
Click to expand...
Click to collapse
You went to /data/media/0/TWRP/Backups?
On my phone which is running CM, I can see TWRP backups 3 ways: via USB connection as flash drive, in TWRP recovery mode, and through Root Explorer app.
Via USB, you can drag them off onto your computer to save elsewhere.
But of course you can only restore them in TWRP recovery mode.
Michaelmansour1997 said:
I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 2.8.7.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://forum.xda-developers.com/mot.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 11/27 nightly you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the Proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for the 11/27 build (https://www.androidfilehost.com/?w=files&flid=42109)
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
Click to expand...
Click to collapse
Okay two things: there are two 11/27 CM12.1 zips and the gapps link isn't working. Would open gapps or banks gapps work?
Marky__Mark said:
Okay two things: there are two 11/27 CM12.1 zips and the gapps link isn't working. Would open gapps or banks gapps work?
Click to expand...
Click to collapse
1) gapps link is working fine for me: http://d-h.st/BX7Q Same link from the op.
2) either 11/27 will work. Somehow duplicate got created. I used the 2nd one just in case.
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
to get the twrp backup, boot into twrp and plug into pc then go into the twrp folder and you will find it there.
ChazzMatt said:
1) gapps link is working fine for me: http://d-h.st/BX7Q Same link from the op.
2) either 11/27 will work. Somehow duplicate got created. I used the 2nd one just in case.
Click to expand...
Click to collapse
Alright, I'll have to download it on my computer. Thanks
---------- Post added at 06:17 PM ---------- Previous post was at 05:25 PM ----------
Michaelmansour1997 said:
I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 2.8.7.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://forum.xda-developers.com/mot.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 11/27 nightly you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the Proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for the 11/27 build (https://www.androidfilehost.com/?w=files&flid=42109)
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
Click to expand...
Click to collapse
I also had to install SuperSU
Marky__Mark said:
Alright, I'll have to download it on my computer. Thanks
---------- Post added at 06:17 PM ---------- Previous post was at 05:25 PM ----------
I also had to install SuperSU
Click to expand...
Click to collapse
lol thanks for reminding me, i dont use many root apps if im on cm12.1 but ill add that to the OP
ChazzMatt said:
Just make sure you do this...
before flashing the new ROM + GAPPS + kernel.
I think this is why some people were getting system storage space errors. They had something else installed on their system before flashing new ROM and didn't wipe it clean first.
Click to expand...
Click to collapse
System storage issue was something different. It did end up being the file system type. Might have had a bad flash somewhere along the lines. One I moved /data back to ext4, restored my stock backup, I followed the same steps and everything worked fine. I'll chalk it up to a fluke, or bad download.
Thanks all I found the twrp back up in data/media/0/twrp/backup
I'm not brave enough to be one of the first to install a custom ROM. I also don't know how much modifying this needs coming from the Moto Maxx. Are they nearly identical?
Anyone else getting google play services has stopped message? I get it on every boot but only once. Probably cuz that gapps package is so old. Do we have anything else to work with?
Did all the steps in order above exactly and runs smooth but I can't make or receive calls I have signal and data but no calls says cellular connection not avalible. And here's a screenshot of phone status in settings
http://postimg.org/image/rbuysqvut/
DanielWEWO said:
I'm not brave enough to be one of the first to install a custom ROM. I also don't know how much modifying this needs coming from the Moto Maxx. Are they nearly identical?
Click to expand...
Click to collapse
You aren't the first. Many, many people installed both Resurrection Remix and CM 12.1 yesterday on their XT1254 Droid Turbos. You are actually late to the party.
Yes, they are exactly identical except for radio. They are all Quarks. Motorola released two Quark devices across the world under 3 model names. No, it was NEVER exclusive to Verizon. Forget that marketing lie. They even released the XT1250 U.S. Moto Maxx which was IDENTICAL even in radio to the Droid Turbo, with the SAME FCC ID. Sold by smaller regional LTE/CDMA carriers. it was the "dev" version of the Droid Turbo as it had unlock-able bootloader and runs on Verizon with a Verizon SIM card. The XT1254 Droid Turbo is just the last Quark to get the bootloader unlocked. Where have you been?