I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 3.0.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
https://dl.twrp.me/quark/twrp-3.0.0-0-quark.img.html
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://download.cyanogenmod.org/?device=quark
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for CM 12.1 (https://www.androidfilehost.com/?w=files&flid=42109)
Optional: Download SuperSU for root (https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Flash SuperSU if you need root
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
All the links are here
http://forum.xda-developers.com/showthread.php?p=63956817
And here:
http://forum.xda-developers.com/showthread.php?p=63956441
Since I posted those, both CM and Resurrection Remix can be flashed on XT1254 with @baybutcher27 beta kernel found in those posts.
By tomorrow noon you can flash CM with it's own kernel, when the 11/28 nightly appears.
In those posts are also links for bootloader warning removal, Moto camera for CM, as well as 60fps custom bootloader animation.
ChazzMatt said:
All the links are here
http://forum.xda-developers.com/showthread.php?p=63956817
And here:
http://forum.xda-developers.com/showthread.php?p=63956441
Since I posted those, both CM and Resurrection Remix can be flashed on XT1254 with @baybutcher27 beta kernel found in those posts.
By tomorrow noon you can flash CM with it's own kernel, when the 11/28 nightly appears.
In those posts are also links for bootloader warning removal, Moto camera for CM, as well as 60fps custom bootloader animation.
Click to expand...
Click to collapse
Thankyou VERY much, updated OP, and im working on installing it myself right now for the guide.
bump for people looking for it
Just make sure you do this...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
before flashing the new ROM + GAPPS + kernel.
I think this is why some people were getting system storage space errors. They had something else installed on their system before flashing new ROM and didn't wipe it clean first.
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
See here:
http://forum.xda-developers.com/dro...e-location-t3259060/post64049328#post64049328
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
On the stock rom TWRP doesn't show my backups at all like it usually does but in TWRP it shows them there like it should. No idea why.
Edit: just saw post above, its there lol
INCREMENTAL said:
On the stock rom TWRP doesn't show my backups at all like it usually does but in TWRP it shows them there like it should. No idea why.
Click to expand...
Click to collapse
You went to /data/media/0/TWRP/Backups?
On my phone which is running CM, I can see TWRP backups 3 ways: via USB connection as flash drive, in TWRP recovery mode, and through Root Explorer app.
Via USB, you can drag them off onto your computer to save elsewhere.
But of course you can only restore them in TWRP recovery mode.
Michaelmansour1997 said:
I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 2.8.7.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://forum.xda-developers.com/mot.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 11/27 nightly you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the Proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for the 11/27 build (https://www.androidfilehost.com/?w=files&flid=42109)
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
Click to expand...
Click to collapse
Okay two things: there are two 11/27 CM12.1 zips and the gapps link isn't working. Would open gapps or banks gapps work?
Marky__Mark said:
Okay two things: there are two 11/27 CM12.1 zips and the gapps link isn't working. Would open gapps or banks gapps work?
Click to expand...
Click to collapse
1) gapps link is working fine for me: http://d-h.st/BX7Q Same link from the op.
2) either 11/27 will work. Somehow duplicate got created. I used the 2nd one just in case.
aneeshmbabu said:
I did twrp back up , but I can't find it the back up folder in twrp folder ?? How this happened no idea ..
Click to expand...
Click to collapse
to get the twrp backup, boot into twrp and plug into pc then go into the twrp folder and you will find it there.
ChazzMatt said:
1) gapps link is working fine for me: http://d-h.st/BX7Q Same link from the op.
2) either 11/27 will work. Somehow duplicate got created. I used the 2nd one just in case.
Click to expand...
Click to collapse
Alright, I'll have to download it on my computer. Thanks
---------- Post added at 06:17 PM ---------- Previous post was at 05:25 PM ----------
Michaelmansour1997 said:
I am not taking ownership of anything that I post below.
TWRP for DROID TURBO:
[RECOVERY][OFFICIAL TWRP 2.8.7.0][For all Quark][Moto Maxx/Turbo and Droid Turbo]
http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
CM 12.1:
[Moto MAXX XT1225][OFFICIAL] CyanogenMod 12.1
http://forum.xda-developers.com/mot.../moto-maxx-xt1225-cm12-0-pre-release-t3060089
@baybutcher27 also developed a custom kernel:
[Kernel][Moto Maxx]BHB27-Kernel[5.x.x][CM base][V-1.1.4]
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526
https://github.com/bhb27/My_works
How to Install:
To Install the CM 12.1 11/27 nightly you must:
Download the CM12.1 rom, (https://download.cyanogenmod.org/?device=quark)
Download the Proper Gapps ( http://d-h.st/BX7Q)
Download the custom kernel for the 11/27 build (https://www.androidfilehost.com/?w=files&flid=42109)
Boot Into TWRP
Wipe including system partition
Flash rom
Flash kernel
Flash gapps
Wipe cache/dalvic
Do standard wipe again (not system partition this time)
Reboot system
Profit
Thanks to @hotrodwinston for helping me out
Click to expand...
Click to collapse
I also had to install SuperSU
Marky__Mark said:
Alright, I'll have to download it on my computer. Thanks
---------- Post added at 06:17 PM ---------- Previous post was at 05:25 PM ----------
I also had to install SuperSU
Click to expand...
Click to collapse
lol thanks for reminding me, i dont use many root apps if im on cm12.1 but ill add that to the OP
ChazzMatt said:
Just make sure you do this...
before flashing the new ROM + GAPPS + kernel.
I think this is why some people were getting system storage space errors. They had something else installed on their system before flashing new ROM and didn't wipe it clean first.
Click to expand...
Click to collapse
System storage issue was something different. It did end up being the file system type. Might have had a bad flash somewhere along the lines. One I moved /data back to ext4, restored my stock backup, I followed the same steps and everything worked fine. I'll chalk it up to a fluke, or bad download.
Thanks all I found the twrp back up in data/media/0/twrp/backup
I'm not brave enough to be one of the first to install a custom ROM. I also don't know how much modifying this needs coming from the Moto Maxx. Are they nearly identical?
Anyone else getting google play services has stopped message? I get it on every boot but only once. Probably cuz that gapps package is so old. Do we have anything else to work with?
Did all the steps in order above exactly and runs smooth but I can't make or receive calls I have signal and data but no calls says cellular connection not avalible. And here's a screenshot of phone status in settings
http://postimg.org/image/rbuysqvut/
DanielWEWO said:
I'm not brave enough to be one of the first to install a custom ROM. I also don't know how much modifying this needs coming from the Moto Maxx. Are they nearly identical?
Click to expand...
Click to collapse
You aren't the first. Many, many people installed both Resurrection Remix and CM 12.1 yesterday on their XT1254 Droid Turbos. You are actually late to the party.
Yes, they are exactly identical except for radio. They are all Quarks. Motorola released two Quark devices across the world under 3 model names. No, it was NEVER exclusive to Verizon. Forget that marketing lie. They even released the XT1250 U.S. Moto Maxx which was IDENTICAL even in radio to the Droid Turbo, with the SAME FCC ID. Sold by smaller regional LTE/CDMA carriers. it was the "dev" version of the Droid Turbo as it had unlock-able bootloader and runs on Verizon with a Verizon SIM card. The XT1254 Droid Turbo is just the last Quark to get the bootloader unlocked. Where have you been?
Related
Hi
I have bricked my Note after flash new CM9 from XpLoDWilD.
It was in CyanoFree ROM with LP6 modem.
I wipe factory/reset/cache/david
Flash CM9 ver 2
Flash Gapps date 20120429
I think LB2 modem is better as showed on XpLoDWilD screen capture, so plash it.
Wipe again (as XpLoDWilD instruction)
Dead ...
Everything right now completely no react.
the instructions was (even mentioned in the discussion threads) to flash from a GB kernel.
you did not follow instructions, it's your fault.
yeah we assume you flashed from a GB kernel and NOT a leaked ICS kernel..
praetorius said:
the instructions was (even mentioned in the discussion threads) to flash from a GB kernel.
you did not follow instructions, it's your fault.
Click to expand...
Click to collapse
I posted it here is not for penalty, Just for people warning
Think that the ROM have problem because it's not just easy to brick the phone by wipe data.
I read that it's very risky to do a wipe with a leaked ics kernel and can burn your emmc.
Maybe if you had followed the instruction your phone will be ok now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
beckend said:
MOD EDIT: Quote Removed, for reasons highlighted below
Click to expand...
Click to collapse
guys.....
although OP (perhaps) caused brick by himself, it's not nice to be "glad u bricked"!
just be polite and professional, hint him at his fault with a smile, but not this way!
br
Q2V said:
I posted it here is not for penalty, Just for people warning
Think that the ROM have problem because it's not just easy to brick the phone by wipe data.
Click to expand...
Click to collapse
No, CM9 doesn't have a problem, the kernel you wiped with has a problem.
There's a reason the instructions specifically told you NOT to flash from an I9220 repacked kernel in red text. But you did it anyway.
The ICS leak kernels are notorious for doing exactly what happened to you, which is why you were told NOT to flash from them.
OK...so I was trying to read all the pages and took from it this... I'm on cyanofree...
Boot to recovery...flash abyssnote kernel 4.2...reboot into recovery...full wipe...wipe cache. Advanced wipe dalvik. Install zip from SD and flash cm9. So that's what I set out to do. But I got as far as flashing abyssnote kernel and rebooting into recovery...
...recovery keeps flashing the screen and rebooting back to recovery...buttons are unresponsive ie. Volume for up and down...altho occasionally register a press...and it won't boot either...stalls after boot animation...maybe I flashed the wrong kernel but it was from dev section. Or maybe I did the wrong process. .. or maybe the process has this tendency. Can anyone shed any light? Sorry if I missed something obvious ....
I posted in cm9 section also sorry. Just checking in here
Edit : I understand instructions said to do another way but I guess this is a lesson to others following the thread and what others have done won't necessarily work for you. Follow the clear instructions instead of "yeah it worked for me" methods
Sent from my GT-I9100 using xda premium
Don't care. This happens when you don't read.
But this is an effective way to get rid of the noobs here. Just write an install guide that's longer than 3 lines, and voila! They won't read and then they're gone. Phone is dead.
Sent from my GT-N7000
NOZdroid said:
OK...so I was trying to read all the pages and took from it this... I'm on cyanofree...
Boot to recovery...flash abyssnote kernel 4.2...reboot into recovery...full wipe...wipe cache. Advanced wipe dalvik. Install zip from SD and flash cm9. So that's what I set out to do. But I got as far as flashing abyssnote kernel and rebooting into recovery...
...recovery keeps flashing the screen and rebooting back to recovery...buttons are unresponsive ie. Volume for up and down...altho occasionally register a press...and it won't boot either...stalls after boot animation...maybe I flashed the wrong kernel but it was from dev section. Or maybe I did the wrong process. .. or maybe the process has this tendency. Can anyone shed any light? Sorry if I missed something obvious ....
I posted in cm9 section also sorry. Just checking in here
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Try one of the Gingerbread CF-Root kernels
Entropy512 said:
Try one of the Gingerbread CF-Root kernels
Click to expand...
Click to collapse
I'm prob too noob to tell if ur having a dig or not ha. But yeah thanks I will. Appreciate your efforts
Few days without my note til I get access to a computer for Odin lol
Sent from my GT-I9100 using xda premium
Entropy512 said:
No, CM9 doesn't have a problem, the kernel you wiped with has a problem.
There's a reason the instructions specifically told you NOT to flash from an I9220 repacked kernel in red text. But you did it anyway.
The ICS leak kernels are notorious for doing exactly what happened to you, which is why you were told NOT to flash from them.
Click to expand...
Click to collapse
No, again (for people pay more attention on flash this CM9 ROM):
- I dont flashed any repacked i9220 ROM, also dont flash any Kernel.
- The problem is i have full wipe after flash the CM9 -> will make brick
- Flash Gapps, Modem, wipe cache .... is safe
As normaly, all other ROM is just request full wipe, wipe cache before flash the new ROM at all, but, because this ROM is another, request make this again after flash the ROM, my mistake is do the full wipe, so pls, pay attention because this is easy make a mistake and expensive!
Q2V said:
No, again (for people pay more attention on flash this CM9 ROM):
- I dont flashed any repacked i9220 ROM, also dont flash any Kernel.
- The problem is i have full wipe after flash the CM9 -> will make brick
- Flash Gapps, Modem, wipe cache .... is safe
As normaly, all other ROM is just request full wipe, wipe cache before flash the new ROM at all, but, because this ROM is another, request make this again after flash the ROM, my mistake is do the full wipe, so pls, pay attention because this is easy make a mistake and expensive!
Click to expand...
Click to collapse
we did read as per your original post
I have bricked my Note after flash new CM9 from XpLoDWilD.
It was in CyanoFree ROM with LP6 modem.
I wipe factory/reset/cache/david
Flash CM9 ver 2
Flash Gapps date 20120429
I think LB2 modem is better as showed on XpLoDWilD screen capture, so plash it.
Wipe again (as XpLoDWilD instruction)
Click to expand...
Click to collapse
This means you're on a leaked ICS kernel because thats the only way you were on CyanoFree..
You skipped the step
FLASH A GB KERNEL should have been step one.
among noobs they can be confused..and maybe the CM9 thread should maybe be a bit more noob friendly as in saying.
IF you have any other ICS rom downgrade to GB before flashing to the real CM9 ie downgrade via Odin and flash the pit + repartition..that way you know for sure that you are in a clean state
just my 1.3c
Bricking your device is A real pain. Thanks for the heads up and hope you get back your device soon with minimum loss
Sent from my GT-N7000 using XDA
MrDSL said:
we did read as per your original post
This means you're on a leaked ICS kernel because thats the only way you were on CyanoFree..
You skipped the step
FLASH A GB KERNEL should have been step one.
Click to expand...
Click to collapse
No, i was in LP5 kernel
Edit: yes, youre right, LP5, LP6 is leak i9220 kernel!
Q2V said:
- I dont flashed any repacked i9220 ROM, also dont flash any Kernel.
Click to expand...
Click to collapse
WRONG. You were on Cyanofree which uses a repacked I9220 kernel.
Yet you ignored the CM9 instructions and flashed directly from it anyway.
Q2V said:
No, i was in LP5 kernel
Click to expand...
Click to collapse
It doesnt matter they are BOTH LEAKED kernels..
Dude you didnt follow insturctions!! period!!
I am sorry YOU bricked your device because YOU didn't follow instructions but next time READ before you do something and this wont happen...
Also change your title of this thread because CM9 is NOT the cause of this brick..
anilisanil said:
Bricking your device is A real pain. Thanks for the heads up and hope you get back your device soon with minimum loss
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Checked with Samsung service, it cost about 300$ for mainboard replacement.
I dont have local warranty because i bough it from abroad.
H3G M7 Guru Reset Rom + File Collection
HTML:
In this thread I will be sharing my collection of file's for the HTC One M7 on H3G. All these files will be useful for returning to stock especially those with s-on. I hope someone finds them useful anyway [emoji14] All files in this thread are suitable for devices with the following CiD and MiD
Code:
modelid: PN0710000
cidnum: H3G__001
cidnum: H3G__106
cidnum: H3G__402
cidnum: H3G__G04
Guru Reset Rom Stock KitKat 6.14.771.2Guru_Reset_M7_H3G_6.14.771.2.zip MD5 :- 676e56aa7e5e725387b65dd14e322fba
Includes optional Stock Recovery, Stock Radio and Root.
Install with TWRP recovery like any other rom. (TWRP 2.6.3.3 Recommended)
OTA updates when available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to @crushalot www.htc1guru.com for the original aroma guru reset package.
Stock Nandroid BackupsKitKat 4.4.3 6.14.771.2 TWRP Nandroid MD5 :- 72c8152a8179fbd4cb2d2e5b8b35b905
Full Stock for OTA's
KitKat 4.4.2 5.12.771.3 TWRP Nandroid
Full Stock for OTA's
JellyBean 4.3 3.62.771.3 TWRP Nandroid
Pre-Rooted and missing Preload Data, Not suitable for taking OTA's
Firmware Zips 2.24.771.3.zip MD5:- a56305ea6570ee4ff656a4357171ce11
3.62.771.3.zip MD5:- ba684b5207d74e24075cd4b02ead3ba1
4.20.771.17.zip MD5:- d4fba9da51321b95741440b647bc9bee
5.12.771.3.zip MD5:- 64f0d0a23fb5468d669bb2f922043d9c
6.14.771.2.zip MD5:- 0dd432cbf3ddddcdd74ee669b44ee376
7.19.771.1.zip MD5:- 0ec86aefeadf7e3c0e37fafaa1192777
OTA Update ZipOTA_M7_UL_JB_50_SENSE5_H3G_UK_2.24.771.3-1.28.771.6_release_328027_signedlnazfd1l6874pvs8.zip MD5:- d1eecfce64c7847a2ee35a9e9be8ca95
OTA_M7_UL_JB43_SENSE55_MR_H3G_UK_3.62.771.2-2.24.771.3_release_338684cjuf0j4gm1ogoo4n.zip MD5:- c7798f585b4ff326a3b8bad083ba05ed
OTA_M7_UL_K44_SENSE55_MR_H3G_UK_4.20.771.17-3.62.771.3_release_3536491kghgv33dtz4m18n.zip MD5:- 583dae463ffdf61b337f7946ed9db01a
OTA_M7_UL_K44_SENSE60_MR_H3G_UK_5.12.771.3-4.20.771.17_release_37214948ro8l36c6yo7dhi.zip MD5:- 44a3956d277141886af7ebc60a072766
OTA_M7_UL_K443_SENSE60_MR_H3G_UK_6.14.771.2-5.12.771.3_release_387423qg91a2pgfo5cx9ic.zip MD5:- 3dca820e82014f04afba66b41735bba4
OTA_M7_UL_L50_SENSE60_MR_H3G_UK_7.19.771.1-6.14.771.2_release_420807iloxunzwjif4idfm.zip MD5:- 3dca820e82014f04afba66b41735bba4
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Black_Eyes said:
What is H3G?
Which one should i have to use?
i'm on firmware 6.09.401.11, HTC__001 and S-ON.
Click to expand...
Click to collapse
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Danny201281 said:
H3G is the mobile carrier Three these files are no good to you. I believe you requested a nandroid backup for your device in the collection thread. Take a look I posted a link there for you
http://forum.xda-developers.com/showthread.php?p=58690924
Click to expand...
Click to collapse
Thanks Again
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Sacrimony said:
They all look extremely tempting and I actually understand which each file is, well almost hehe. Which would you recommend downloading in order to start from scratch on the HTC One M7 to be able to download OTA's? Or would it be quicker to just flash stock recovery?
Click to expand...
Click to collapse
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Danny201281 said:
It depends on your current situation. If you have the Stock Rom complete with Preload data. Then flashing the Stock Recovery should do the trick just fine with little hassle.
If you have a Custom Rom or have at some point unlocked the bootloader with your Stock Rom then the Guru Reset would be your best option. As Unlocking the bootloader wipes the Stock preload data which will cause the OTA to fail.
Click to expand...
Click to collapse
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Sacrimony said:
Ah I see, well I think I fall under the latter category. So is it just a case of downloading the guru .zip and then booting into TWRP and then flashing the .zip through there? ?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Danny201281 said:
Yes the gurureset flashes in recovery. It uses the Aroma installer and can flash the Stock Recovery for you this is an option during the installer setup :good:
Click to expand...
Click to collapse
Ah that is fantastic! So everything I need is included in the guru zip? Man, one again you've been amazing. Thank you so much!
Sent from my HTC One using XDA Free mobile app
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app[/QUOTE]
Sacrimony said:
Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked.
Click to expand...
Click to collapse
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Click to expand...
Click to collapse
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Sacrimony said:
Just a quick update on the guru zip. Everything has worked perfectly, up and running as new. Just thought I should mention that on the bootloader screen it still says Tampered and Unlocked. Plus there's no longer a recovery, is this a problem for OTA's? Knowing me I've probably messed something up along the way.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Danny201281 said:
Yep what @alray said ,
Just for clarity, with the stock recovery if your getting a black screen followed by a picture of a phone with a red exclamation mark then that's normal. That is the stock recovery. To reveal the recovery menu hold volume up and press the power button. You will see some errors about unable to mount sdcard this is also normal. The recovery is looking for an sd card slot which the M7 doesn't have. We only have the internal storage :good:
Click to expand...
Click to collapse
alray said:
Flashing a ROM will not change anything in the bootloader. You need s-off to remove both of these.
I think you probably mean that there's no more custom recovery installed on your phone? Because the reset rom flashed back the stock recovery, like danny said at post #8.
Click to expand...
Click to collapse
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Sacrimony said:
Ah I understand now. That is really helpful, thanks both of you for clearing that up. I've read on a couple of sites that you may need to re-lock the bootloader and to get rid of the "Tampered" sign if you're to receive OTA updates, do you guys know if that's the case?
Click to expand...
Click to collapse
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Danny201281 said:
The guru reset is everything you need to be ready for the OTA. :good: Unlocked bootloader is fine as long as the software is stock :good:
Click to expand...
Click to collapse
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Sacrimony said:
Ok, that's awesome. Many thanks once again for your help and for your patience with my annoying questions!
Click to expand...
Click to collapse
Your welcome :good: it's better to get it right first time, than to try and fix it after it's gone wrong
It gets stuck at 10%.
GeoVali99 said:
It gets stuck at 10%.
Click to expand...
Click to collapse
Which recovery are you using?
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
GeoVali99 said:
TWRP 2.8
But it's irrelevant now. After a couple of system formattings it did install.
Click to expand...
Click to collapse
Ok cool, for the record though installs getting stuck happens a lot with TWRP 2.8.X.X :good:
That's why I recommend 2.6.3.3 but glad you got sorted though. If youhavent checked recently h3g are pushing the update now
[Official Lollipop 5.1.1] P600 DOJ3 (Mega & Android File Host) Fast Link + Easy Root
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07 - Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
Rooting guide for 5.1.1 : http://forum.xda-developers.com/showthread.php?p=63637426
TWRP Link : https://dl.twrp.me/lt03wifiue/
[BETA][2015.10.10] SuperSU v2.52 - https://download.chainfire.eu/743/SuperSU/BETA-SuperSU-v2.52.zip
Wanam Xposed Framework & App - http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
All credit goes to the People running the posts I linked. I didn't do anything but bring it together in one post to save you time running around cyberworld
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/showthread.php?p=63637426
Download only the P600 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Extra Features :
Note 5 Feature "Screen Off App" - http://forum.xda-developers.com/showthread.php?p=62731428
I don't know if this info is important to anyone but if someone wants it then here it is :
This info is from "About Device"
Model number
SM-P600
Android version
5.1.1
Kernel version
3.4.39-6086244
[email protected] #1
Fri Oct 23 17:24:00 KST 2015
Build number
LMY47X.P600XXUDOJ3
SE for Android status
Enforcing
SEPF_SM-P600_5.1.1_0039
Fri Oct 23 18:04:15 2015
KNOX version
KNOX 2.4.1
Standard SDK 5.4.1
Premium SDK 2.4.1
Customization SDK 2.4.0
Container 2.4.1
CEP 2.0.1
OTP 1.1.1
SE for Android 2.3.0
SSO 2.4.1
TIMA 3.0
VPN 2.2.0
Zionator said:
Galaxy Note 10.1 2014 (Wi-Fi) (SM-P600) from region PHE!
Firmware Version Info
(PDA: P600XXUDOJ3 CSC: P600OXADOJ3 CHANGELIST: 6086244 BUILD DATE: 23.10.2015)
It's not rooted and is untoched. It's completely stock!!!
I know others have made posts but they all use ****ty servers. I have uploaded this to Mega and Android File Host as they are both faster and more stable then pony Samsung's crappy servers.
When you flash rom with the setup as in picture it will flash over your previous rom and keep all data and apps and settings.
For maximum stability i recommend after first boot you do factory reset.
SM-P600 Note 10.1 Stock 5.1.1 Rom - Mega: https://mega.nz/#!2x5nmQob
Decription Key : !FU4t1X41UjV9kGmGkw8f-ZxomeyD13nbhL4FqV82AiI
Odin 3.07- Mega : https://mega.nz/#!CsJBQLhR
Decription key : !aSakzROgYonQ-MuKH3vJ_veSxCPcZWElBfZJ6At9Q-4
SM-P600 Note 10.1 Stock 5.1.1 Rom - Android File Host : https://www.androidfilehost.com/?fid=24269982086987868
md5 - 4435246f2bf0620c7acc5406bf189e3a
Odin 3.07- Android File Host : https://www.androidfilehost.com/?fid=24269982086987869
If you want root then there is a post here offering that ROOT : http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
Click to expand...
Click to collapse
Thank you. And did you root it successfully? I cannot flash a twrp.
What about region
Whats the difference if my region is not this and i update?
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
iopxiang said:
Thank you. And did you root it successfully? I cannot flash a twrp.
Click to expand...
Click to collapse
Not yet I will wait a few days to do anything as I just want to see how it works and the battery life on stock. Then I will root and remove many system bloatware apps and see the difference.
rbaleiro said:
Whats the difference if my region is not this and i update?
Click to expand...
Click to collapse
This is the Spanish region but I live in UK and at the very first setup screen I chose UK language so it don't really matter about the region as there is no modem. This device is just WiFi so region makes no difference.
chengineer said:
Thank you for links. I wonder what if I install it over 4.3 instead of 4.4.2. Is there any difference?
Click to expand...
Click to collapse
You are welcome. Well I flashed this over a custom rom Hyperdrive 4.4.2 and then once it booted I then factory reset it. Before I factory reset the device it was fine I just like the fresness of roms.
So the answer to your question is I don't know but I don't think it will make a difference as the bootloader is in the rom and will be flashed automatically with the rom. I came from 4.4.2 so I cannot speak about 4.3 but I assume it will be the same result.
Sent from my SM-N920C using Tapatalk
Thanks, Ill install too and see what happens!
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
rbaleiro said:
Thanks, Ill install too and see what happens!
Click to expand...
Click to collapse
You're welcome.
rbaleiro said:
Just installed! It's running very smoothly. I just realised that they don't have the internal game lollipop when u push the version of the OS. Lol!
Click to expand...
Click to collapse
Yes I have been waiting for this lollipop for ages now. Just hope someone cooks up a lovely custom rom soon ?
Sent from my SM-N920C using Tapatalk
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
Touch (as well as all other functions) works in twrp 2.8.6
Sent from my SM-P600 using XDA Free mobile app
I can't thank you enough. I flashed 5.1.1 yesterday and everything was working fine, but I was really missing root. I could NOT wrap my head around the root process as described in the other posts. Nothing against all their hard work, I'm just slow. Your step by step was so easy to follow! Now I'm rooted and happy. Thanks!!
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks. ☺
Will it work i have 5.0.1 one on my phone
countryboy1000000 said:
Will it work i have 5.0.1 one on my phone
Click to expand...
Click to collapse
Yes, it should, even you have custom rom.
---------- Post added at 06:02 PM ---------- Previous post was at 05:59 PM ----------
amey2606 said:
Guys, a question.
If i want to clean install Lollipop with full wipes using Odin on the SM-P601, which is currently on the UAE csc, using the INU csc, what are the steps i should follow.?
And if i factory reset using the recovery, will all my files in the internal storage get deleted.?
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Yes, factory reset is like you just brought the tablet from the store.
vinayburman said:
Thank you so much for taking time to write each step in details. This made life so easier. You are right the other guide is little complicated. I was not aware that touch does not work in twrp also was not unchecking auto root. But then I came across your guide and believe me it's so easy. Thanks again, I rooted successfully.
Click to expand...
Click to collapse
You are welcome. I am glad you got it rooted. First thing I did was debloating like a mad man hehe.
Then exposed and now I am gonna try and find working themes for it ?
Sent from my SM-N666F "Special Edition"
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
MasK said:
Any idea if the root will work on P605 too? It's got 5.1.1 as well and I'm pretty excited to get on it. However, not may people are discussing about it.
Thanks for the guide btw!
Click to expand...
Click to collapse
Yes it will work if u download the 605 rom and then from root post download the modded boot image for 605 if available and last thing get TWRP for 605 as well.
Do as described in my guide and apart from what I said above the rest is universal meaning that supersu and closed are the same for all versions.
Sent from my SM-P600 using Tapatalk
for sm-p601
Can you please give a link for sm-p601 too
Zionator said:
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
Click to expand...
Click to collapse
as I held these three buttons, I watched as the Samsung note splash screen flickered and restarted over and over. I held for about 10 minute and gave up after my hands got tired. After that, I couldn't get past the splash screen and had to do a straight ROM via ODIN.....can I still root? What was I doing wrong??
!! Before you start modifying your phone. Install the ze500cl .126 firmware first through stock recovery. Once that is done then you can unlock your bootloader and install TWRP and begin to flash ROMs. Just make a backup before you begin flashing!! Don't hesitate to reply in the thread if you get stuck during a procedure. Everyone was a noob once.
Beginners guide: http://forum.xda-developers.com/showthread.php?p=68298796
[1]
Bootloader unlock/relock THANK YOU!!! @CHuvaCK21 http://forum.xda-developers.com/showthread.php?p=66835940
[2]
TWRP 3.0.img http://forum.xda-developers.com/showthread.php?p=66865028 flash in fasboot, rename twrp download to twrpzf2e.img , boot into fastboot and enter command through adb:
fastboot flash recovery twrpzf2e.img
[3]
Stock .118 recovery.img
https://drive.google.com/file/d/0B_c2hdjSBKMALWZxUUxYRE1lWE0/view?usp=drivesdk
[4]
[ROM] RussiaNBeaR http://forum.xda-developers.com/showthread.php?p=66396562
Once flashed, it will say no os installed, reboot anyway.
[5]
[ROM] CM 12.1 unofficial http://forum.xda-developers.com/showthread.php?p=66980912
MIRROR: https://drive.google.com/file/d/0B_c2hdjSBKMAd0dIZlJwQWhlYlE/view?usp=drivesdk
[ROM] AICP --5.1.1 LP http://forum.xda-developers.com/showthread.php?p=68384432
[ROM] CM 13 [6.0.1] MM
http://forum.xda-developers.com/showthread.php?p=69759945
[ROM] Resurrection Remix [6.0.1]
https://yadi.sk/d/h4rNgOQz32QBDQ
[ROM] Resurrection Remix [OFFICIAL] [7.1.1]
https://forum.xda-developers.com/showthread.php?p=70976055
[ROM] Lineage Os 14.1 [7.1] http://forum.xda-developers.com/showthread.php?p=70012046
[ROM] Mokee Rom [7.1.1] https://download.mokeedev.com/?device=z00d
Gapps http://opengapps.org
Select: x86 - android version(5.1,6.0,7.1) -- pico
[6]
[Kernel] CM 12.1 kernel by @CHuvaCK21
http://forum.xda-developers.com/showthread.php?p=68065391
[7]
adb installer for your computer https://drive.google.com/file/d/0B_c2hdjSBKMAQnh5cm03eTFwNFU/view?usp=docslist_api
[8]
twrp tethered recovery https://drive.google.com/file/d/0B_c2hdjSBKMATVlhcUI5Q29HNjg/view?usp=docslist_api
[9]
supersu 2.71 https://drive.google.com/file/d/0B_c2hdjSBKMAeDN2RmJNVm9Ddms/view?usp=docslist_api
[10]
xposed[v.79 sdk21 x86]flashable + apk + zip uninstaller https://drive.google.com/file/d/0B_c2hdjSBKMARGFNSEVZN0JDVWM/view?usp=docslist_api
[11]
cmd.bat file for your computer. https://drive.google.com/file/d/0B_c2hdjSBKMAZmdsTmtxZVJtNFE/view?usp=drivesdk Put this file in the working folder on your computer that you will be adb/fastboot flashing from.
viper4android https://drive.google.com/file/d/0B_c2hdjSBKMAaFpGdmNiVkFIQUU/view?usp=docslist_api unzip install like normal apk
ViPER4android universal fix
http://forum.xda-developers.com/showthread.php?p=66397897
deep buffer remover (flash) https://drive.google.com/file/d/0B_c2hdjSBKMATWloV0oybG9ZQnM/view?usp=docslist_api helps v4a work better
asus stock firmware ze500cl www.asus.com/Phone/ZenFone_2_ZE500CL/HelpDesk_Download
How to install asus firmware http://forum.xda-developers.com/showthread.php?p=63479580 instead of using version 102 use 118, it's most recent. And i prefer twrp as it can read ext sd and cwm cannot
system app uninstaller https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
Permissive Kernel thanks to @cidlover
http://forum.xda-developers.com/showthread.php?p=65638379
SElinux changer https://drive.google.com/file/d/0B_c2hdjSBKMAeEtFN3daeEdJZWc/view?usp=docslist_api
Normal emojis (galaxy s7 style)https://drive.google.com/file/d/0B_c2hdjSBKMARjdUaEZkSGh6eTg/view?usp=docslist_api with a root browser, go into system/fonts look for notocoloremoji.ttf and delete or rename with .bak, paste this one in its place and set permissions to rw-r-r and boom! No more scoop of butter emojis!
Caller id faker( just for kicks) https://drive.google.com/file/d/0B_c2hdjSBKMATG95MjVfcndSS28/view?usp=docslist_api do not let playstore update, if it does uninstall updates from app options
How to adjust screen density http://forum.xda-developers.com/showthread.php?p=60492075
material dark launcher http://forum.xda-developers.com/showthread.php?p=64784090 much lighter than zen launcher.
Quick tip: once you have flashed Asus stock firmware over the AT&T firmware you are now able to flash the Asus firmware through stock recovery just in case you do something and cannot get back into fastboot. Install a 4 way reboot app. This is with wanam for xposed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my zf2e[ze500cl] using Tapatalk
To root: you must install the ADB installer to your PC then run the twrp tethered recovery on your PC (type:ACCEPT , option 4 then T4) as well with your phone connected click launcher.bat and make sure to have super su.zip on your SD card and flash that zip file boom you are rooted
Sent from my zf2e[ze500cl] using Tapatalk
Safe debloat list, there were some apps that I could of deleted but I didn't and obviously if there is an app that you use don't delete it. I've even deleted the launcher and the messaging app and replace them with lighter ones.
As for any app pertaining to audio, v4a does everything, it works smoother. Just enable expert ui in v4a settings, you can fine tune everything. ??
To completely delete app remains. Remove the folders the app left behind in data/app, system/app, system/priv-app
Sent from my zf2e[ze500cl] using Tapatalk
Thanks you for everything in one place. Very helpful resources. But how to root
Simply enable usb debugging on your phone, run adb installer on your pc and connect your phone. Make sure to have supersu.zip on your sd card, Run launcher.bat from tethered twrp with your phone connected. Type accept then 4 then T4. Then on twrp on your phone, tap install, search for supersu.zip flash it. And you are rooted. Bypass everything else root this and that. Just flash super su. That is the whole point of rooting in the first place, to install supersu and grant root permissions for applications. I hope i helped.
Sent from my zf2e[ze500cl] using Tapatalk
So flash with custom recovery Super SU zip. And rooted okay so easy. Trying now. Thanks you @robot_head
---------- Post added at 12:26 AM ---------- Previous post was at 12:20 AM ----------
Yes it work so easy. And all file needed in 1 place. What custom ROM you suggest. Am so excited . :good:
I'm sorry no custom roms as of yet. Just stock, but xposed works great on this phone. Glad to hear you're rooted my friend??
Sent from my zf2e[ze500cl] using Tapatalk
Thanks for putting this together. I've been bookmarking like tons of different pages for when I get the unlock code for my phone, but this is SO much more convenient.
Working on a rom as of now, updater script is kicking my arse. Total noob at this.
Sent from my zf2e[ze500cl] using Tapatalk
robot_head said:
Working on a rom as of now, updater script is kicking my arse. Total noob at this.
Click to expand...
Click to collapse
What kind of ROM will it be? Fairly close to AOSP or a performance-oriented Stock ROM?
It will basically be exactly how I have my phone set up and be debloated. Xposed, stuff like that. It's an Asus rom .118 with as much Asus stuff I could take off. Even with changing the firmware on this phone its still locked down by AT&T. So that means no kernels, everything has to be based off stock or at least use a stock kernel to run
Sent from my zf2e[ze500cl] using Tapatalk
Sent from my zf2e[ze500cl] using Tapatalk
Carrier unlock
Does anyone tried to carrier-unlock this phone via the at&t unlock webpage?
I'm really interested in buy this phone, but I need it unlocked becoz I don't live in USA
ravb90 said:
Does anyone tried to carrier-unlock this phone via the at&t unlock webpage?
I'm really interested in buy this phone, but I need it unlocked becoz I don't live in USA
Click to expand...
Click to collapse
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
djole94hns said:
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
Click to expand...
Click to collapse
Only difference I could find between the two is that the 2E (AT&T Exclusive) has less storage and RAM. It's 8GB of storage vs 16GB and 1GB of RAM instead of 2GB.
HypnoticSilence said:
Only difference I could find between the two is that the 2E (AT&T Exclusive) has less storage and RAM. It's 8GB of storage vs 16GB and 1GB of RAM instead of 2GB.
Click to expand...
Click to collapse
You also can't unlock the bootloader on the AT&T variant, and you need to unlock it to flash custom recovery and custom ROMs.
Edit: actually, this might work: http://forum.xda-developers.com/zenfone2/help/zenfone-2e-root-rom-t3174135/post64716579#post64716579
Nope, i followed that, no success. Stupid network error, maybe if someone could decompile the unlock app and figure out the reason it won't unlock for the 2e. Maybe apatch with lucky patcher or some way to force it to unlock the bootloader without connecting to asus servers. Hmmmm
https://youtu.be/-6Dd8UZmd2M
Sent from my zf2e[ze500cl] using Tapatalk
djole94hns said:
You can buy the unlocked phone already. ZenFone 2E ZE500CL is an AT&T exclusive, ZenFone 2 ZE500CL is the same phone, but for the rest of the world. I have ZE500CL, I've bought it unlocked.
Click to expand...
Click to collapse
The thing is, the AT&T variant is only 60$, that's why i'm asking :silly:
2e is a ok phone, i down graded to the lowest firmware 12.16.4.3 and it's much faster than 118. Super debloated, and init.d apk allows kernel auditor to work, so the phone feels faster thanks to @cidlover for the find. I almost considered a blu phone but development isn't what i thought it was, more than this phone though.
And no i haven't tried carrier unlock, maybe region lockaway by @Chainfire
Sent from my Z00D using Tapatalk
Ready for a rom
Me myself got confused when it comes to my F460K. There are only two active threads for the variant, and it's starting to be a mess. So I will organize and maintain this thread as much as possible. All your inputs are welcome, so help me make this thread as complete as possible!
1. LG PC Suite
If you want to just upgrade your phone to stock Marshmallow (provided you aren't), then the LG PC Suite is enough to do software updates. It can also be used to backup your data and move files from your PC to your phone and vice versa. But if you want the custom ROMs, then you should head to...
2. Rooting
IMPORTANT NOTE: You can only permanently root if you're on LP or KK. Marsmallow users can have their phones rooted but after a reboot, its gone. So you must downgrade first before attempting to root permanently. See below how to downgrade.
So here is the link on how to root your phone. All the files you need are also there. It's simple: plug your phone, wait for it to be recognized, and press Start.
3. Downgrading to Lollipop
If you had your phone upgraded to stock Marshmallow, then you must downgrade first to be able to install custom recoveries and ROMs. To do this, you need to follow the steps in this post, which is a part of a larger general post on how to root LG G3. For the KDZ file you must be careful not to choose a different variant than your own.
4. Custom Recovery
Now that you've downgraded to Lollipop, this is where the fun starts. To install TWRP recovery on your phone, follow the steps on this link. Actually it's just an apk, so download it, install and follow the instructions. Hassle-free.
5. Flashing ROMs
Flashing ROMs for the Cat.6 is the same as with other phones. Download the file, put it in the root directory of your internal storage, go to recovery mode, do a backup of your current ROM, do a full wipe, and install the new ROM. Below are the ROMs available for the F460 lineup! Have fun!
SHOUTOUTS TO ALL THE PEOPLE WHO MADE THIS POSSIBLE!! hyelton, avicohh, ingoljosh, bender_007, realdreams, and Cullenator!
CUSTOM ROMS SECTION
This all came from the thread that Cullenator made. If there are any more that should be added, let me know! Click on the links to know more about the ROM and the download links for it. Some of the links might be dead or outdated.
1. RadeonMaya (6.0 Marshmallow, based on stock)
2. Yue Sheng yanzihan f460 G3 Cat.6 (6.0 Marshallow, based on stock)
3. SudaMod-2.0 f460 G3 Cat.6 (6.0 Marshmallow, based on CM)
4. XS v3R G3 Cat.6 (6.0 Marshmallow, based on stock)
5. VDT-V6 f460 G3 Cat.6 (6.0 Marshmallow, based on stock)
6. F460SKL_30Dv2 f460 G3 Cat.6 (6.0 Marsmallow, based on stock)
7. G3Cat6-yanzihan-stock-6.0-Build5 f460 G3 Cat.6 (6.0 Marshmallow, based on stock)
8. Mokee (6.0 Marshmallow, based on CM)
9. CM13 (6.0 Marshmallow)
10. Resurrection Remix (6.0 Marsmallow, based on CM)
11. Tizen (6.0 Marshmallow, based on CM)
12. BlurOS (6.0 Marshmallow, based on stock) *link seems to be dead at the moment*
13. F460v30h and f460v30f by Atulaphan (6.0 Marshmallow, based on stock) *currently using this one and its very good*
14. XS v3.1 ROM by TuanMU (6.0 Marshmallow, based on stock)
This link right herehas more ROMs available for use. It's in Russian, so just use Google Translate
reserved #2
Great work man
Isn't Tizen based on stock if I'm not wrong?
---------- Post added at 03:41 PM ---------- Previous post was at 03:39 PM ----------
AutoRec app thread u mentioned above doesn't states F460 variants in support list. It states F400 which is also Korean. So which variant app actually to use?
ali.akbar01 said:
Great work man
Isn't Tizen based on stock if I'm not wrong?
---------- Post added at 03:41 PM ---------- Previous post was at 03:39 PM ----------
AutoRec app thread u mentioned above doesn't states F460 variants in support list. It states F400 which is also Korean. So which variant app actually to use?
Click to expand...
Click to collapse
Yep Tizen is based on stock. Also I've updated the link for the recovery. Seems that it isn't on the main link. Cheers!
notinthemood said:
Yep Tizen is based on stock. Also I've updated the link for the recovery. Seems that it isn't on the main link. Cheers!
Click to expand...
Click to collapse
Then any working link for autorec app for f460?
guys, anyone knows how to remove the dual clock on F460-L that using android 6.0? please help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ali.akbar01 said:
Then any working link for autorec app for f460?
Click to expand...
Click to collapse
I replaced the link with the working autorec for f460
droidface said:
guys, anyone knows how to remove the dual clock on F460-L that using android 6.0? please help
Click to expand...
Click to collapse
You can try doing this, just replace PH with whatever country you're on. It needs root btw
http://www.symbianize.com/showthread.php?t=1337549
notinthemood said:
You can try doing this, just replace PH with whatever country you're on. It needs root btw
http://www.symbianize.com/showthread.php?t=1337549
Click to expand...
Click to collapse
Thanks man, but my device is not rooted, any other way?
notinthemood said:
I replaced the link with the working autorec for f460
Click to expand...
Click to collapse
Thanks mate
---------- Post added at 07:31 PM ---------- Previous post was at 07:26 PM ----------
notinthemood said:
I replaced the link with the working autorec for f460
Click to expand...
Click to collapse
One more question, I have used AutoRec app on other variants of G3 running stock MM and it worked. Ur thread says of downgrading to LP first in order to flash custom recovery. Will this app u have provided work on stock MM?
---------- Post added at 08:02 PM ---------- Previous post was at 07:31 PM ----------
droidface said:
guys, anyone knows how to remove the dual clock on F460-L that using android 6.0? please help
Click to expand...
Click to collapse
Which rom u r using?
ali.akbar01 said:
Thanks mate
---------- Post added at 07:31 PM ---------- Previous post was at 07:26 PM ----------
One more question, I have used AutoRec app on other variants of G3 running stock MM and it worked. Ur thread says of downgrading to LP first in order to flash custom recovery. Will this app u have provided work on stock MM?
---------- Post added at 08:02 PM ---------- Previous post was at 07:31 PM ----------
Which rom u r using?
Click to expand...
Click to collapse
Stock android 6.0 not rooted, help please
One more question, I have used AutoRec app on other variants of G3 running stock MM and it worked. Ur thread says of downgrading to LP first in order to flash custom recovery. Will this app u have provided work on stock MM?
Click to expand...
Click to collapse
I came from stock MM on my F460K. I was advised to downgrade first since I need to root first before flashing custom recovery. There are no permanent root for F460 variants running stock MM, that's why I downgraded, then rooted, and lastly flashed custom recovery. So I haven't tried using AutoRec on stock MM. But I don't think it will work.
droidface said:
Thanks man, but my device is not rooted, any other way?
Click to expand...
Click to collapse
In that link, there's a temporary root that you can do. You will have root access but once you reboot it will be gone. During that period you can do the localization.
notinthemood said:
In that link, there's a temporary root that you can do. You will have root access but once you reboot it will be gone. During that period you can do the localization.
Click to expand...
Click to collapse
which one? is it the first step using king root?
in the thread OP said it may cause bootloop, and i don't know how to flash kdz file if i need to, that's why i'm not sure to try it or not
droidface said:
which one? is it the first step using king root?
in the thread OP said it may cause bootloop, and i don't know how to flash kdz file if i need to, that's why i'm not sure to try it or not
Click to expand...
Click to collapse
I'm referring to the symbianize link I gave you. I did that on my F460K before and I was able to change my localization.
notinthemood said:
I'm referring to the symbianize link I gave you. I did that on my F460K before and I was able to change my localization.
Click to expand...
Click to collapse
yes i tried to root it with kingroot 4.8.2 but failed
any advice?
droidface said:
yes i tried to root it with kingroot 4.8.2 but failed
any advice?
Click to expand...
Click to collapse
huh... I'm pretty sure it worked for me before. You can try iRoot. What you want to do for you to change the localization is to edit the build.prop and you can only do that if you are rooted.
Or you could always downgrade to stock lollipop and use a custom ROM with root access.
notinthemood said:
huh... I'm pretty sure it worked for me before. You can try iRoot. What you want to do for you to change the localization is to edit the build.prop and you can only do that if you are rooted.
Or you could always downgrade to stock lollipop and use a custom ROM with root access.
Click to expand...
Click to collapse
yes i'm confused too why it didnt give root access, can you share the apk that you used before?
---------- Post added at 10:21 AM ---------- Previous post was at 09:56 AM ----------
notinthemood said:
huh... I'm pretty sure it worked for me before. You can try iRoot. What you want to do for you to change the localization is to edit the build.prop and you can only do that if you are rooted.
Or you could always downgrade to stock lollipop and use a custom ROM with root access.
Click to expand...
Click to collapse
i even tried with the lastest version of KingRoot, it succeed at first but my phone automatically restarted and the root access is gone
droidface said:
yes i'm confused too why it didnt give root access, can you share the apk that you used before?
---------- Post added at 10:21 AM ---------- Previous post was at 09:56 AM ----------
i even tried with the lastest version of KingRoot, it succeed at first but my phone automatically restarted and the root access is gone
Click to expand...
Click to collapse
sadly I don't have it with me anymore. Try vroot or iroot.