First off, I would like to thank everyone from [REF] [RADIO] OnePlus One Modem Collection. I created this new post because it seems that zephiK from the previous thread has since moved on to different devices.
How to Flash:
I use this exact version of TWRP: Unofficial TWRP 2.8.7.0 by kumajaya. Other people have reported problems flashing with various other versions of TWRP but I KNOW that this version works just fine. Please don't post about problems using other versions.
Once you have this version installed you can just flash the firmware zip like you would any other zip.
Another option to install these is to use fastboot, You just unpack the zip to your fastboot folder and run these commands:
Code:
fastboot flash modem NON-HLOS.bin
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash tz tz.mbn
fastboot flash LOGO logo.bin
fastboot flash oppostanvbk static_nvbk.bin
Downloads:
(Ordered by date released)
bacon_firmware_update_2015_05-15_DI.3.0.c6-00241.zip , https://www.androidfilehost.com/?fid=24052804347825946 <--- Currently bundled with latest CM13 nightly
bacon_firmware_update_2015_10-15_.4.0.1.c7-00013.zip , https://www.androidfilehost.com/?fid=24052804347839695
bacon_firmware_update_2015_12-30_.4.0.1.c7-00011.zip , https://www.androidfilehost.com/?fid=24352994023703385
bacon_firmware_h2os_update_2015_12-30_.4.0.1.c1.11-00004.zip , https://www.androidfilehost.com/?fid=24352994023703384
bacon_firmware_oxygen_update_2016_01_22_.4.0.1.c7-00013 , https://www.androidfilehost.com/?fid=24385658843825722
bacon_firmware_update_2016_1-25_.4.0.1.c7-00011.zip , https://www.androidfilehost.com/?fid=24389512218018449
Here is a file compare list for the firmwares listed above
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Frankenstein Release:
(Jan 24th release uses a c1-11 base and the 241 modem/sbl1)
MrSHME_bacon_firmware_update_2016_01_24 , https://www.androidfilehost.com/?fid=24385658843825783
.
Reserved.
Thanks a lot! Needed an up-to date thread for firmwares, now that CM is gone crazy about the firmwares
Thanks man.
What's the difference between: 2015_12-30_.4.0.1.c7-00011.zip and 2016_1-25_.4.0.1.c7-00011.zip? Are these basically just the same firmware and modem?
arh2o said:
What's the difference between: 2015_12-30_.4.0.1.c7-00011.zip and 2016_1-25_.4.0.1.c7-00011.zip? Are these basically just the same firmware and modem?
Click to expand...
Click to collapse
I'll post an updated hash compare picture after work but essentially some of the files changed within including the modem itself. Basically the modem number does not mean anything anymore because the CM team is updating the modem but not updating the number.
Sent from my A0001 using Tapatalk
arh2o said:
What's the difference between: 2015_12-30_.4.0.1.c7-00011.zip and 2016_1-25_.4.0.1.c7-00011.zip? Are these basically just the same firmware and modem?
Click to expand...
Click to collapse
Same baseband code with probably some changes within the binary files. This packages come from HydrogenOS: every release since last September came with a new firmware pack but only three times the baseband code changed.
Hey guys, new to the OPO.
I picked up a used device that was running Oxygen (5.0 android) and flashed a CM based 6.0.1 rom. Everything is working fine.
What exactly do these firmware files do?
Should I flash the latest one to my device?
Thanks
Hi, I have a 4.4 rom and I would like to update to a 6.0.1 rom, should I upgrade my firmware before flashing the rom?
Thanks
MrSHME_bacon_firmware_update_2016_01_24 It works on Temasek CM 13 no CAF ?? Does the proximity sensor?
Edit.: This firmware works ... I confirm!
Edit2.: bacon_firmware_update_2016_1-25_.4.0.1.c7-00011 It does not work download...
seinilol said:
Hi, I have a 4.4 rom and I would like to update to a 6.0.1 rom, should I upgrade my firmware before flashing the rom?
Thanks
Click to expand...
Click to collapse
Just flash the latest CM13 nightly before flashing any other MM rom.
mistamikel said:
Hey guys, new to the OPO.
I picked up a used device that was running Oxygen (5.0 android) and flashed a CM based 6.0.1 rom. Everything is working fine.
What exactly do these firmware files do?
Should I flash the latest one to my device?
Thanks
Click to expand...
Click to collapse
Up to you! Some people, including myself, have reported better signal or better bluetooth/wifi with various different firmwares.
NeGriTa79 said:
MrSHME_bacon_firmware_update_2016_01_24 It works on Temasek CM 13 no CAF ?? Does the proximity sensor?
Edit.: This firmware works ... I confirm!
Edit2.: bacon_firmware_update_2016_1-25_.4.0.1.c7-00011 It does not work download...
Click to expand...
Click to collapse
Updated the download link for Jan 25.
Thank God for posting this thread! I constantly checked what firmwares were up-to-date. Kudos!
I just flashed the newest firmware.
Killed my data connection and network too (just lost signal now)
FML lol
Sent from my A0001 using XDA Free mobile app
Ok after flashing the newest firmware, I can't connect to my network. Tired everything, including different firmware, reflashing the rom ect.
Any help????
mistamikel said:
I just flashed the newest firmware.
Killed my data connection and network too (just lost signal now)
FML lol
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
mistamikel said:
Ok after flashing the newest firmware, I can't connect to my network. Tired everything, including different firmware, reflashing the rom ect.
Any help????
Click to expand...
Click to collapse
What version of twrp are you using and on what rom?
All fixed. Just flashed back to the oldest firmware posted lol.
Solved my problem.
I was using 2.8.6.0 for twrp.
Rom is Sultans newest one.
mr.shme said:
Just flash the latest CM13 nightly before flashing any other MM rom.
Click to expand...
Click to collapse
Thank you sir !
mistamikel said:
All fixed. Just flashed back to the oldest firmware posted lol.
Solved my problem.
I was using 2.8.6.0 for twrp.
Rom is Sultans newest one.
Click to expand...
Click to collapse
I too am on Sultan's unofficial MM ROM and I use the h2os_update_2015_12-30_.4.0.1.c1.11-00004.zip (DI.4.0.1.c1.11-00004-M8974AAAAANAZM-1) without any problem. That's the one built in with his Jan 1, 2016 update. I have read that the official CM 13 nightly has reverted to an older firmware, but I don't know which one.
I'm using the franken build with SultanXDA's 011716 rom. The baseband shows 241 but seems to be more stable than previous old 241 basebands.
An oddity with BT headphones with the 4 marshmallow roms I've used is that the volume button controls the media volume. No other controls work. Was there a change to the way AVRCP or A2DP works in marshmallow? Normally, the volume keys on the phone control the volume, then the BT headset has it's own volume control. And the fwd/rwd/play/pause actually works. Also, some roms have insanely loud BT volume with specific headsets but not others. So, it looks like BT is being used as an experiment or something.
Wow thanks! I have some questions:
1. How can I backup my current modem without doing full NAND backup?
2. Where did you get these modems? Was it extracted from CM nightlies build?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-This firmware it's up to date with latest changes from Xiaomi.-
It is VoLTE working on this firmware?
It should work now, but i can't test It becouse my provider has no VoLTE. Try and tell me!
Any risk of relocking bootloader flashing this firmware?
Absolutely not.
Why i need this firmware?
If you want to flash a CM13/14/14.1/AOSP N rom, you need to flash this updated firmware first.
For what reason i have to choose this firmware instead of another one?
If you have flashed another firmware, you probably have those issues: battery percentage not working, camera autofocus not working, low signal strenght. If not, stay on your firmware.
In this firmware there's no emmc_appsboot.mbn, why?
There's no need to flash bootloader every time and yes, you can flash this firmware safely.
How to install?
-Reboot to TWRP recovery ( latest TWRP by TheStrix recommended)
-Flash firmware
-Factory reset (data, cache and dalvik-cache)
-Flash your favorite Marshmallow or Nougat ROM
-Reboot your phone
-Enjoy
Updated CM13/14/14.1 firmware. (12.04.2017)
Latest KENZO Firmware
Latest KATE Firmware
Old CM13/14/14.1 firmware.
KENZO
KATE
Enjoy your favourite ROM!
I found that emmc_appsboot.mbn doesn't be included in your new firmware if comparing to CM14.1 common firmware.
Is there any problem ?
Kris Chen said:
I found that emmc_appsboot.mbn doesn't be included in your new firmware if comparing to CM14.1 common firmware.
Is there any problem ?
Click to expand...
Click to collapse
There's no need to include the emmc_appsboot.mbn
Psy_Man said:
There's no need to include the emmc_appsboot.mbn
Click to expand...
Click to collapse
i see that file in unofficial ubl tutorial, so that file contain about bootloader?
Does it work on the latest Ressurection Remix 5.80 Nougat?
lazygenius2505 said:
i see that file in unofficial ubl tutorial, so that file contain about bootloader?
Click to expand...
Click to collapse
Yes
peeyaj said:
Does it work on the latest Ressurection Remix 5.80 Nougat?
Click to expand...
Click to collapse
Of course! Tested personally
just checked kenzo version. why choose miui 6.11.24 to use as cm14/14.1 firmware? there is any different with previous miui version?
Psy_Man said:
Yes
Click to expand...
Click to collapse
@Kris Chen said that that file included in common cm14 fw, there is no any effect if you didn't include that file?
What's the difference between this one and 11.15?
@Psy_Man
Does this fix the supersu messing up with sensors?
@Psy_Man Thats from 241116 miui8 based radio firmware?
Psy_Man said:
There's no need to include the emmc_appsboot.mbn
Click to expand...
Click to collapse
why do you think there is no need for that file?
Don't know yet, but it indeed no issue after flashing this firmware.
Is it my wrong image or not because I found signal more stable on this firmware.
lazygenius2505 said:
@Kris Chen said that that file included in common cm14 fw, there is no any effect if you didn't include that file?
Click to expand...
Click to collapse
Will this help in getting VoLTE to work?
Is this firmware from MiUi MM dev rom...so that we dont have to flash MM dev rom and backup efs to get VoLTE working??
Please give some details in OP.
Sent from my Redmi Note 3 using Tapatalk
Thanks.... its working perfectly in Kate
peeyaj said:
@Psy_Man
Does this fix the supersu messing up with sensors?
Click to expand...
Click to collapse
Use Phh's superuser instead of supersu
Psy_Man said:
Of course! Tested personally
Click to expand...
Click to collapse
Does volte works after flashing this on latest RR
kiran G. said:
Does volte works after flashing this on latest RR
Click to expand...
Click to collapse
My provider has no VoLTE and i can't confirm
kiran G. said:
Does volte works after flashing this on latest RR
Click to expand...
Click to collapse
No, volte does not work with this firmware (RR 7.1).
Thread abandoned due to change of phone, continued by kamilmirza here:
https://forum.xda-developers.com/oneplus-3t/how-to/firmware-beta-10-t3631166
----------------------------
Here you go, if you're not using the stock rom and want the latest firmware & modem.
Latest update (Official 4.1.6) added 10th June :
https://www.androidfilehost.com/?fid=673368273298962854
Latest beta - Beta 9 added, dated 14th June:
https://www.androidfilehost.com/?fid=817550096634779620
Just in case you have problems with the current release or feel like your phone runs better on a previous version, here's a link to my firmware folder, it contains all the previous versions if you have any problems :
https://www.androidfilehost.com/?w=files&flid=145813
Please don't post alternative sources, if you want to post your own source then make your own thread.
you can use on FreedoomOs 4.0.2?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
You should be able to, just be aware anyone flashing that you won't be able to flash your rom again without flashing the 4.0.2 firmware,
4.0.3 has different TZ version:
4.0.2 : TZ.BF.4.0.1-76917
4.0.3 : TZ.BF.4.0.1-83199
If you try flashing your rom back in you'll get a TZ error similar to the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm guessing it won't take roms long to update to the new firmware, as long as OP release the source quickly.
Did the same with LineageOS 2017-02-08 and it's working fine. But while flashing the ROM I get the same TZ error.
I think it's safe to change the TZ version in updater-script before updating to the newest LOS (until the ROM developers will update it) isn't it ?
Can you upload and post a modem only flashable zip for 4.0.2. and 4.0.3 please.
Separate flashable zip is appreciated.
Need a thread like this https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
for OnePlus 3T
if i flash this... whether it will bi unolcked baseband because i cant get 4g in serbian telenor with a3010 model?
Just updated and uploaded 7.1.1 firmware/modem.
you are the best, thank you
djsubterrain said:
Just updated and uploaded 7.1.1 firmware/modem.
Click to expand...
Click to collapse
It's ok to flash on RR and other custom 7.1.1 Roms??
evanxyj said:
It's ok to flash on RR and other custom 7.1.1 Roms??
Click to expand...
Click to collapse
The roms have latest included already.. If u feel. The don't.. U are ok to flash them.. No issues at all..
I saw your finger pointing to your Thanks button, OP.
I hit it. =)
evanxyj said:
It's ok to flash on RR and other custom 7.1.1 Roms??
Click to expand...
Click to collapse
I'm using it on the latest build of RR and it works fine.
djsubterrain said:
I'm using it on the latest build of RR and it works fine.
Click to expand...
Click to collapse
I tried. And trust zone check failed cause the new firmware one updated and RR ROM biulds on the old one.
Maybe because I'm using the unofficial RR.
evanxyj said:
I tried. And trust zone check failed cause the new firmware one updated and RR ROM biulds on the old one.
Maybe because I'm using the unofficial RR.
Click to expand...
Click to collapse
Probably, I'm on the official build of RR, you should advise the dev on the unofficial build to update their sources, it should be built on LOS which has been updated to latest firmware now.
Thanks! ☺
djsubterrain said:
Probably, I'm on the official build of RR, you should advise the dev on the unofficial build to update their sources, it should be built on LOS which has been updated to latest firmware now.
Click to expand...
Click to collapse
The latest unofficial RR has updated the updater script, I've checked the file.
djsubterrain said:
I'm using it on the latest build of RR and it works fine.
Click to expand...
Click to collapse
And will latest 7.1.1 firmware work with other kernel like boeffla or is that independent from firmware? Anyone tried that? thx
Exist firmware and modem from Last 4.1.0?
Enviado desde mi unknown mediante Tapatalk
I suggest not to upgrade firmware, until the custom ROM dev support it.
Yes, I'm also looking for this, but no pressure to you dev
rezaluchu said:
I suggest not to upgrade firmware, until the custom ROM dev support it.
Yes, I'm also looking for this, but no pressure to you dev
Click to expand...
Click to collapse
RR works with 4.1 fw :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
###Disclaimer###
I am not responsible if your phone will be damaged, broken, boot looping.
YOU are choosing to make these modifications and accept the fact that something might go wrong.
The main goal of this ROM is to enjoy the Stock Rom without any visual changes fully stock, clean & stable
Features :
Based on Latest Stock ROM
Force Encryption Disabled
DM Verity Disabled
Partitions trimmed for better performance
Requirements :
Unlocked Bootloader
TWRP Recovery
How To Flash :
Download the latest build
Take a nandroid backup
Recommended(Optional) - Full wipe and factory reset
Flash ROM using latest TWRP 3.x Recovery
Reboot.
Enjoy!
How to root?
Just flash latest magisk
Download :
Download ErfanROM Here
Firmware Dumps :
NPL26.118-20 Dump : Download
NPLS26.118-20-1 Dump : Download
NPL26.118-20-5 Dump : Download
NPLS26.118-20-5-8 Dump : Download
System Image and Boot taken from OTA with IMG Patch Tools
XDA:DevDB Information
ErfanROM for Griffin, ROM for the Moto Z
Contributors
erfanoabdi
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, TWRP
Based On: Stock
Version Information
Status: Stable
Created 2017-07-26
Last Updated 2017-12-08
Reserved
Any luck with fixing wifi yet - as you mentioned in another thread a few days back that some have issued with wifi?
Thanks.!
Nice! Is the modem image upgraded? (New WiFi firmware for example)
I don't know in detail how much stuff Lineage use from the stock firmware (modem, binary blobbs or whatever they are called). So the question is would it benefit to flash?
Sent from my XT1650-03 using Tapatalk
I'm on Stock 7.0 (NPLS25.86-86-30-12 APRIL PATCH). Can I flash this Rom or do I have to be on 7.1.1?
bert269 said:
Any luck with fixing wifi yet - as you mentioned in another thread a few days back that some have issued with wifi?
Thanks.!
Click to expand...
Click to collapse
Wifi fix is on thread
swejuggalo said:
Nice! Is the modem image upgraded? (New WiFi firmware for example)
I don't know in detail how much stuff Lineage use from the stock firmware (modem, binary blobbs or whatever they are called). So the question is would it benefit to flash?
Click to expand...
Click to collapse
You can try it but we're using old moto driver on LOS, test and report back
bullfinch110 said:
I'm on Stock 7.0 (NPLS25.86-86-30-12 APRIL PATCH). Can I flash this Rom or do I have to be on 7.1.1?
Click to expand...
Click to collapse
Both is good for you
Install This ROM or sideload new OTA
Hi,
I need to flash booth files (boot.img and system.img.zip)? If yes, Is there a order?
Tks
erfanoabdi said:
Wifi fix is on thread
Click to expand...
Click to collapse
Thank you - appreciated.
Sideload does not work for me: OEM Check failure.
I'll try this in the next couple of days and report back - thanks
bert269 said:
Thank you - appreciated.
Sideload does not work for me: OEM Check failure.
I'll try this in the next couple of days and report back - thanks
Click to expand...
Click to collapse
You need twrp to flash this rom
Wifi does not work.
After flash boots in infinite loops
I get that...thanks
lollyjay said:
You need twrp to flash this rom
Click to expand...
Click to collapse
I totally understand - I was "trying" to say that I could not get either NPLS25.86-30-12 (with Sideload) nor NPLS25.86-30-12 (with fastboot) to work.
jimdent said:
Wifi does not work.
After flash boots in infinite loops
Click to expand...
Click to collapse
Even after flashing modem?
erfanoabdi said:
Wifi fix is on thread
You can try it but we're using old moto driver on LOS, test and report back
Both is good for you
Install This ROM or sideload new OTA
Click to expand...
Click to collapse
I was thinking of the WiFi needing reboot or airplaine mode toggle issue. If its more than just a driver issue.
Users coming from stock 7.1.1 would need to work without any issues too. Hopefully they will not have any major issues.
Sent from my XT1650-03 using Tapatalk
swejuggalo said:
I was thinking of the WiFi needing reboot or airplaine mode toggle issue. If its more than just a driver issue.
Users coming from stock 7.1.1 would need to work without any issues too. Hopefully they will not have any major issues.
Click to expand...
Click to collapse
We're waiting for moto new wifi driver to start fixing lineage bug
erfanoabdi said:
Even after flashing modem?
Click to expand...
Click to collapse
yes after flash loop starts
Tried flashing this Rom with TWRP 3.1.1 (official). I skipped wifi-setup and used data Connection. Here it got stuck in "searching for system update" for more than 10 minutes. So i wiped everything and started new by flashing stock rom with Januar Patch (via rsd-lite), took the three ota-updates...now i'm back on stock april patch NPLS25.86-31-5. (weird, because before it was NLS25.86-30-12) Too much for my old brain. I'll be patiently waiting for the official 7.1 ota. Until then, keep up the good work and thanks for your kind contribution!
Hi Erfan, to root is recommended Magisk, but can it be rooted with SuperSU? What could be the difference
lilloscar said:
Hi Erfan, to root is recommended Magisk, but can it be rooted with SuperSU? What could be the difference
Click to expand...
Click to collapse
Take a look here https://forum.xda-developers.com/moto-z/how-to/guide-how-to-root-moto-z-supersu-t3551113
Will this work on any variant? I'm on RetMX with @erfanoabdi RR ROM.
bullfinch110 said:
Tried flashing this Rom with TWRP 3.1.1 (official). I skipped wifi-setup and used data Connection. Here it got stuck in "searching for system update" for more than 10 minutes. So i wiped everything and started new by flashing stock rom with Januar Patch (via rsd-lite), took the three ota-updates...now i'm back on stock april patch NPLS25.86-31-5. (weird, because before it was NLS25.86-30-12) Too much for my old brain. I'll be patiently waiting for the official 7.1 ota. Until then, keep up the good work and thanks for your kind contribution!
Click to expand...
Click to collapse
Eject your simcard and don't let it to connect to internet in setup wizard
lilloscar said:
Hi Erfan, to root is recommended Magisk, but can it be rooted with SuperSU? What could be the difference
Click to expand...
Click to collapse
SuperSU need patched f2fs driver on kernel
I'm not sure if moto patched it so I'm waiting for moto to release kernel source then i can update turboZ
MuyKurioso said:
Will this work on any variant? I'm on RetMX with @erfanoabdi RR ROM.
Click to expand...
Click to collapse
Yes it works for you
Just wipe data
Light Stock Rom Asylum 3ARA3 for J330F
Aroma
Version v1.2--Only for flashing over firmware with bootloader 1 .
Version Light Stock v1.L3 for flashing only over firmware with bootloader 2 . ---Here
Asylum 3ARA3 for flashing only over firmware with bootloader 3 . ---Here
Аttention is important!
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. You can not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Click to expand...
Click to collapse
Changelog:
Based in stock Rom
-Deknox
-Debloat
-Zipalign
-Aroma
-Stock kernel-you can choise in Aroma
-No Root-you can choise in Aroma
-Mutant kernel,Permissive -you can choise in Aroma
-Root Magisk 15-you can choise in Aroma
-Volte
-Call Record
-Camera shuter sound
-Optical Reader
-Horizontall clock in lockscreen
...etc
Install:
Install from TWRP.I use this how to install TWRP 3.1.1 on Samsung Galaxy J3 2017
Put .zip in sd card
Before install i recomend make backup to externall sd card and then 5 wipes ,without SD card(see in pictures bellow)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow Aroma instruction,you can choose options
Download:
Light_J330F_v1..2zip
Screenshots:
---------------------
v1.2 2017.12.30
---------------------
Credits:
@AlexVolzsk
Light Stock Rom V1 -Bluetooth does not work!
---------
2017.12.30
Light Stock Rom V1.2-Bluetooth-OK!
View attachment 4369087
Oh excellent, this is great, my phone just gets slower and slower, my old nexus 5 is faster than this phone, I'm sure this will speed it up!!
Dear friend, everything works except bluetooth. Bluetooth does not work either with the stock kernel or with the Mutant kernel.
zlihtar2 said:
Dear friend, everything works except bluetooth. Bluetooth does not work either with the stock kernel or with the Mutant kernel.
Click to expand...
Click to collapse
Have you tried an alternate app
for example?
zlihtar2 said:
Bluetooth does not work
Click to expand...
Click to collapse
Thanks for report bug.Later i try to fix bluetouth bug.
Thank you very much, my best wishes in the new 2017...
---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------
2018 (of course)
zlihtar2 said:
my best wishes in the new 2017...
Click to expand...
Click to collapse
My best wishes to all in the new 2018
Light Stock Rom Version v1.2 uploaded.Fixed Bluetooth.
Yeah man, so fast... Thank you very much!
1.2 Not working for me. 10 minutes after reboot and phone is still booting...
siiik_ said:
1.2 Not working for me. 10 minutes after reboot and phone is still booting...
Click to expand...
Click to collapse
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. Odin does not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed through Odin after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Also if you upgrade phone firmware with bootloader 2,then you can not flash Light Stock v1.2 ,because v1.2 maked from firmware with bootloader 1
Light Stock v1.2 only for flashing over J330FXXU1AQI2 firmware.
Later i upload Light Stock v1.L3 for flashing over J330FXXU2AQL3
lemlis said:
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. Odin does not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed through Odin after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Also if you upgrade phone firmware with bootloader 2,then you can not flash Light Stock v1.2 ,because v1.2 maked from firmware with bootloader 1
Light Stock v1.2 only for flashing over J330FXXU1AQI2 firmware.
Later i upload Light Stock v1.L3 for flashing over J330FXXU2AQL3
Click to expand...
Click to collapse
Thank you sir. I really need a custom rom since the stock one I flashed doesn't recognize my SIM card
siiik_ said:
the stock one I flashed doesn't recognize my SIM card
Click to expand...
Click to collapse
Maybe your phone is locked by region?
Region locked Samsung j3
Light Stock v.1 L3
Light Stock v.1 L3 --flash only over stock firmware with bootloader 2
Вased on J330FXXU2AQL3 (the red number indicates the bootloader version).
Аttention is important!
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Android security path level December 1 2017
Deodex ,Deknox,Debloat
...etc...the changes are the same as in version v1.2
Install:
You must be upgraded to stock firmware J330FXXU2AQL3
Download J330FXXU2AQL3 for flash via Odin you can here:Firmware Version Info
(PDA: J330FXXU2AQL3 CSC: J330FOXY2AQL3 CHANGELIST: 12614858 BUILD DATE: 15.12.2017)
(Android security patch level: 01.12.2017)
Then install TWRP and flash v.1 L3 from TWRP
Download Light Stock v.1 L3:
lemlis said:
Maybe your phone is locked by region?
Region locked Samsung j3
Click to expand...
Click to collapse
No, I flashed the russian firmware not knowing that my sim wouldn't work since it has always worked on any region. Btw not trying to be ungrateful but could you give us a ETA, if it wasn't asking much?
---------- Post added at 10:11 PM ---------- Previous post was at 10:09 PM ----------
siiik_ said:
No, I flashed the russian firmware not knowing that my sim wouldn't work since it has always worked on any region. Btw not trying to be ungrateful but could you give us a ETA, if it wasn't asking much?
Click to expand...
Click to collapse
Holy **** dude you're epic :laugh:
Can you develop a Light rom stock for model SM-327U??
Fdraco10 said:
Can you develop a Light rom stock for model SM-327U??
Click to expand...
Click to collapse
No.i never see SM-327U
flash Samsung J330 Knox and apps cleaner and will be Light :laugh:
lemlis said:
No.i never see SM-327U
flash Samsung J330 Knox and apps cleaner and will be Light :laugh:
Click to expand...
Click to collapse
He meant sm-j327u
Can you add a version that still has Samsung themes and app store installed?
Friends !
I am sharing the ZUI 3.5.337 Firmware_Baseband zip file which can be flashed through TWRP.
The zip file updates our device' firmware to ZUI Oreo Firmware and Baseband is updated to 1.70 (Chinese ZUI Oreo Baseband).
Credit to @kubersharma who created this zip file I am sharing his file here with his approval.
Important Points
1. It should be flashed only over Chinese 1.70 and Indian 1.76 Basebands. Do not try flashing over older basebands.
2. Bootloader won't be re-locked.
3. Data/Internal Storage partitions will not be touched in devices which are not Encrypted.
4. The zip can be flashed on Encrypted devices also. But the device has to be reset when booting into system. People who are flashing it on Encrypted devices, do take back up of all files.
I flashed it over Indian Baseband 1.76 and got updated successfully I was encrypted and I had to format my device in TWRP after flashing the zip.
Both Mobile Data and Wi-Fi Signals are stable.
Android File Host Link - https://androidfilehost.com/?fid=962187416754474260
Reserved!
Thanks for posting xD
Anyways I had removed emmc_appsboot from it and it won't lock bootloader thus it'll not soft brick ya phone.
My Observation over 3.5.243' baseband:
JIO signals don't fluctuate
Note:
People on 1.6x or older basebands can try this, but as this doesn't flash emmc_appsboot thus latest firmware partitions with older emmc_appsboot partition from 1.6x baseband or below, "might" ( as I have not tried it ) face a softbrick.
Could you please tell the Baseband version number.
Please tell the baseband number.
jintu jose said:
could you please pose baseband version number.
Click to expand...
Click to collapse
1.70664.3.76387.1
Works 100%!!!
I flash over 1.70 and get better.
Thanks to kubersharma for the good work
Thanks @AndroidEnthusiast & @kubersharma
This was required, because signal fluctuates a lot on Indian nougat baseband
Can be dirty flashed on existing custom Oreo ROM?
Thanks does this work with VOLTE in india since I faced issues with 1.70 baseband while 1.76 works fine.?
This is not a new baseband. This is the baseband from ZUI 2.5.
Screenshot after flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This baseband is already available at https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/
deeppaul589 said:
This is not a new baseband. This is the baseband from ZUI 2.5.
Screenshot after flashing.
View attachment 4473647
This baseband is already available at [url]https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/[/URL]
Click to expand...
Click to collapse
February's LineageOS 15.1 and April's LineageOS 15.1, the version that is 15.1 is same, but does that mean it is the SAME?
NO, There is a huge difference similarly, Zuk has stopped Changing their baseband versions even though they have updated it on ZUI 3.5 Oreo and now in the latest ZUI OTA of 3.5.337 they had included updated firmware.
Anyways, this Firmware was provided in the latest ZUI OTA UPDATE
kubersharma said:
Reserved!
Thanks for posting xD
Anyways I had removed emmc_appsboot from it and it won't lock bootloader thus it'll not soft brick ya phone.
My Observation over 3.5.243' baseband:
JIO signals don't fluctuate
Note:
People on 1.6x or older basebands can try this, but as this doesn't flash emmc_appsboot thus latest firmware partitions with older emmc_appsboot partition from 1.6x baseband or below, "might" ( as I have not tried it ) face a softbrick.
Click to expand...
Click to collapse
Hey man. Thanks for the zip. I'm in AEX Oreo and running 1.70 Chinese. I had a pretty bad f*ck up with updating to 1.70 (bootloader locked and all). Now, can i dirty flash this file without facing any such issues at all?
Incrovantilist said:
Hey man. Thanks for the zip. I'm in AEX Oreo and running 1.70 Chinese. I had a pretty bad f*ck up with updating to 1.70 (bootloader locked and all). Now, can i dirty flash this file without facing any such issues at all?
Click to expand...
Click to collapse
Yep, you can.
This zip won't lock ya bootloader
kubersharma said:
Yep, you can.
This zip won't lock ya bootloader
Click to expand...
Click to collapse
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only updated baseband?
Incrovantilist said:
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only uodated baseband?
Click to expand...
Click to collapse
Yes
Incrovantilist said:
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only updated baseband?
Click to expand...
Click to collapse
The purpose of this thread itself is to let users know and update firmware and baseband to latest ZUI Oreo's in a simple TWRP way !
Thanks a lot man @kubersharma
I just updated and no consequences like you said.
I can still see fluctuations in jio signal but it's lesser than before. I would say this is like 20% improvement over my previous baseband. I appreciate even 5% improvements so this is good for me. Thanks again.
Update:-
My gps broke recently (even before i flashed this) and flashing this has not changed that. Do you have any fix for that in mind? Any help is very much appreciated.
---------- Post added at 06:01 AM ---------- Previous post was at 05:58 AM ----------
Andro Enthusiast said:
The purpose of this thread itself is to let users know and update firmware and baseband to latest ZUI Oreo's in a simple TWRP way !
Click to expand...
Click to collapse
I don't mind simplicity. Last time I updated my baseband through twrp, my bootloader locked and part of my data gone. I had to make sure I didn't get there again.
Incrovantilist said:
I don't mind simplicity. Last time I updated my baseband through twrp, my bootloader locked and part of my data gone. I had to make sure I didn't get there again.
Click to expand...
Click to collapse
This Zip was tested by users in Telegram group. I tested it too and I shared it only after it was successful for me
Good that it worked for you too bro !
Im still facing H+ signal fluctuations in this firmware baseband, flashed the davide baseband over this firmware still fixed the issue. Other than that I guess it's fine
Andro Enthusiast said:
This Zip was tested by users in Telegram group. I tested it too and I shared it only after it was successful for me
Good that it worked for you too bro !
Click to expand...
Click to collapse
It doesn't break volte, right?
Ritik17 said:
It doesn't break volte, right?
Click to expand...
Click to collapse
I don't use Jio and so I can't comment on it.
But as per @kubersharma , the zip doesn't break Volte. But its always better to take backup of EFS partition.