Light Stock Rom Asylum 3ARA3 for J330F
Aroma
Version v1.2--Only for flashing over firmware with bootloader 1 .
Version Light Stock v1.L3 for flashing only over firmware with bootloader 2 . ---Here
Asylum 3ARA3 for flashing only over firmware with bootloader 3 . ---Here
Аttention is important!
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. You can not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Click to expand...
Click to collapse
Changelog:
Based in stock Rom
-Deknox
-Debloat
-Zipalign
-Aroma
-Stock kernel-you can choise in Aroma
-No Root-you can choise in Aroma
-Mutant kernel,Permissive -you can choise in Aroma
-Root Magisk 15-you can choise in Aroma
-Volte
-Call Record
-Camera shuter sound
-Optical Reader
-Horizontall clock in lockscreen
...etc
Install:
Install from TWRP.I use this how to install TWRP 3.1.1 on Samsung Galaxy J3 2017
Put .zip in sd card
Before install i recomend make backup to externall sd card and then 5 wipes ,without SD card(see in pictures bellow)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow Aroma instruction,you can choose options
Download:
Light_J330F_v1..2zip
Screenshots:
---------------------
v1.2 2017.12.30
---------------------
Credits:
@AlexVolzsk
Light Stock Rom V1 -Bluetooth does not work!
---------
2017.12.30
Light Stock Rom V1.2-Bluetooth-OK!
View attachment 4369087
Oh excellent, this is great, my phone just gets slower and slower, my old nexus 5 is faster than this phone, I'm sure this will speed it up!!
Dear friend, everything works except bluetooth. Bluetooth does not work either with the stock kernel or with the Mutant kernel.
zlihtar2 said:
Dear friend, everything works except bluetooth. Bluetooth does not work either with the stock kernel or with the Mutant kernel.
Click to expand...
Click to collapse
Have you tried an alternate app
for example?
zlihtar2 said:
Bluetooth does not work
Click to expand...
Click to collapse
Thanks for report bug.Later i try to fix bluetouth bug.
Thank you very much, my best wishes in the new 2017...
---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------
2018 (of course)
zlihtar2 said:
my best wishes in the new 2017...
Click to expand...
Click to collapse
My best wishes to all in the new 2018
Light Stock Rom Version v1.2 uploaded.Fixed Bluetooth.
Yeah man, so fast... Thank you very much!
1.2 Not working for me. 10 minutes after reboot and phone is still booting...
siiik_ said:
1.2 Not working for me. 10 minutes after reboot and phone is still booting...
Click to expand...
Click to collapse
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. Odin does not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed through Odin after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Also if you upgrade phone firmware with bootloader 2,then you can not flash Light Stock v1.2 ,because v1.2 maked from firmware with bootloader 1
Light Stock v1.2 only for flashing over J330FXXU1AQI2 firmware.
Later i upload Light Stock v1.L3 for flashing over J330FXXU2AQL3
lemlis said:
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Lowering the firmware version is blocked by the bootloader version in your current installed firmware. Odin does not flash the firmware with the lower version of the bootloader, that is, the firmware J330FXXU1AQI2 can not be flashed through Odin after the firmware is installed J330FXXU2AQL3 (the red number indicates the bootloader version).
Also if you upgrade phone firmware with bootloader 2,then you can not flash Light Stock v1.2 ,because v1.2 maked from firmware with bootloader 1
Light Stock v1.2 only for flashing over J330FXXU1AQI2 firmware.
Later i upload Light Stock v1.L3 for flashing over J330FXXU2AQL3
Click to expand...
Click to collapse
Thank you sir. I really need a custom rom since the stock one I flashed doesn't recognize my SIM card
siiik_ said:
the stock one I flashed doesn't recognize my SIM card
Click to expand...
Click to collapse
Maybe your phone is locked by region?
Region locked Samsung j3
Light Stock v.1 L3
Light Stock v.1 L3 --flash only over stock firmware with bootloader 2
Вased on J330FXXU2AQL3 (the red number indicates the bootloader version).
Аttention is important!
If you have upgrade phone to version J330FXXU2AQL3 -you never can be downgrade to J330FXXU1AQI2
Android security path level December 1 2017
Deodex ,Deknox,Debloat
...etc...the changes are the same as in version v1.2
Install:
You must be upgraded to stock firmware J330FXXU2AQL3
Download J330FXXU2AQL3 for flash via Odin you can here:Firmware Version Info
(PDA: J330FXXU2AQL3 CSC: J330FOXY2AQL3 CHANGELIST: 12614858 BUILD DATE: 15.12.2017)
(Android security patch level: 01.12.2017)
Then install TWRP and flash v.1 L3 from TWRP
Download Light Stock v.1 L3:
lemlis said:
Maybe your phone is locked by region?
Region locked Samsung j3
Click to expand...
Click to collapse
No, I flashed the russian firmware not knowing that my sim wouldn't work since it has always worked on any region. Btw not trying to be ungrateful but could you give us a ETA, if it wasn't asking much?
---------- Post added at 10:11 PM ---------- Previous post was at 10:09 PM ----------
siiik_ said:
No, I flashed the russian firmware not knowing that my sim wouldn't work since it has always worked on any region. Btw not trying to be ungrateful but could you give us a ETA, if it wasn't asking much?
Click to expand...
Click to collapse
Holy **** dude you're epic :laugh:
Can you develop a Light rom stock for model SM-327U??
Fdraco10 said:
Can you develop a Light rom stock for model SM-327U??
Click to expand...
Click to collapse
No.i never see SM-327U
flash Samsung J330 Knox and apps cleaner and will be Light :laugh:
lemlis said:
No.i never see SM-327U
flash Samsung J330 Knox and apps cleaner and will be Light :laugh:
Click to expand...
Click to collapse
He meant sm-j327u
Can you add a version that still has Samsung themes and app store installed?
Related
alright to not make previous visitors of the post confused, i changed the old post color to red, the new update is in Black at the bottom
Now the big news we were waiting for, Lollipop is here for N915G
you can download it from sammobile.com
Model SM-N915G
Model name GALAXY Note Edge
Country Australia
Version Android 5.0.1
Changelist 4144270
Build date Fri, 13 Feb 2015 23:58:14 +0000
Product code XSA
PDA N915GXXU1BOB7
CSC N915GXSA1BOB7
MODEM N915GXXU1BOB7
i've tested this on one of my Note Edge N915G phones and now after two weeks i can totally confirm i've got no bugs and it's super smooth and amazingly beautiful.
it's not on my main phone only because Xposed doesn't support TW Lollipop yet.
also Xmodgames doesn't work on lollipop (yet) for people who use it, especially the Clash of Clan players.
ROOT:
Get the Latest CWM from HERE
go to Download mode and flash the CWM
download SuperSU from HERE
put SuperSU.zip inside your phone
go to Recovery and install the SuperSU
reboot. DONE
UPDATE:
as you may know 5.1.1 is available on sammobile mine is N915GXXU1COL2
everything works fine. i also installed xposed and wanam. (only custom made xposed works and needs recovery installing too)
ROOT for 5.1.1 :
go to download mode and flash the latest TWRP via Odin.
go to recovery mode and install BETA-SuperSU-v2.64
reboot. DONE
i attached both here to make it easier
GOOD LUCK
Nice!
Woohoo!
Can I flash this on the SM-N915T?
My fone is sm-915g but not Australian version can I manually flash the official update it?
Sent from my SM-N915G using Tapatalk
Syd91 said:
My fone is sm-915g but not Australian version can I manually flash the official update it?
Sent from my SM-N915G using Tapatalk
Click to expand...
Click to collapse
Yes you can!
Can this be flash on N915T????
I think this is an official over the air update.
Yes it's official but my csc is STH the lollipop update released is xsa. I wanted to ask if I cud do update using kies without Odin or rooting the device.
Sent from my SM-N915G using Tapatalk
Where is camera shutter button? On the edge screen or in the same place like Note 4 (near home button)?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its look like bug....
Very strange
N915g Indian can I update this ?
kashis32 said:
Can I flash this on the SM-N915T?
Click to expand...
Click to collapse
Any help would be greatly appreciated. Is it possible to flash on T version
anyone managed to get the file mirrored? Mega maybe?
Need CF-Auto-Root and CWM badly for this firmware
kashis32 said:
Any help would be greatly appreciated. Is it possible to flash on T version
Click to expand...
Click to collapse
No... You need the right model version for your 915T.
If you flash this you will end up with a bootloop and, as the bootloader will be upgraded, no way to get back to your stock firmware...
Any SM-915G can flash this irrespective of the location.
---------- Post added at 12:31 PM ---------- Previous post was at 12:21 PM ----------
can i flash this using mac.
fredli888 said:
Need CF-Auto-Root and CWM badly for this firmware
Click to expand...
Click to collapse
OK, go to the TWRP site, download the latest TWRP for Note 4 TMO. I believe it's 2.8.5.0. Make sure it's Odin flashable. Also download the latest flashable SuperSU zip file, 2.46, and put it on your sd card.
Flash Twrp with ODIN, let it reboot. If prompted, DON'T root.....
Now go to TWRP recovery and flash SuperSU. Reboot...
You are now rooted, enjoy... - If you go to SuperSU and it says to remove Knox then allow it.
Simples...
ultramag69 said:
OK, go to the TWRP site, download the latest TWRP for Note 4 TMO. I believe it's 2.8.5.0. Make sure it's Odin flashable. Also download the latest flashable SuperSU zip file, 2.46, and put it on your sd card.
Flash Twrp with ODIN, let it reboot. If prompted, DON'T root.....
Now go to TWRP recovery and flash SuperSU. Reboot...
You are now rooted, enjoy... - If you go to SuperSU and it says to remove Knox then allow it.
Simples...
Click to expand...
Click to collapse
Sorry what you mean "Note 4 TMO"? its a T-mobile version?
Should you wipe the phone prior to flashing this firmware or no cause its official?
[ROM] [G920F] aTerminator™_G920F_3ZPA1_M.6.0.1_1.0b Marshmallow
De-bloated, CSC, Updated Apps, KNOX fully removed,
Native Call Recording,
Camera shutter sound button in the Samsung Camera app,
Enable Call Button in call log list,
Call/Message blocking Settings entry,
Increased-amplified volume and meny more.
Installation:
- Into Download mode (via Odin3_v3.10.7 remove the label with auto reboot. ) flash OLD_BL_TWRP_2.8.7.2.tar
- Into Recovery install (copy to your devices) aTerminator_G920F_3ZPA1_M.6.0.1_1.0b.zip
[BETA-SuperSU-v2.66_Edition.zip to your devices (option)] reload into Download mode.
- Into Download mode flash newsboot.tar
- Reboot
- For a better use of energy stock recovery_stock_6.0.1.tar
Credits: Manh_IT, arter97.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][G920F] aTerminator 3ZPA1 M.6.0.1_1.0b Marshmallow , ROM for the Samsung Galaxy S6
Contributors
AlexMailOne
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-01-17
Last Updated 2016-01-17
Base:
Model name: Galaxy S6
Model: SM-G920F
Country: United Kingdom
Version Android: 6.0.1 (BETA)
Changelist: 6805376
Region code: BTU
PDA: G920FXXU3ZPA1
CSC: G920FBTU3ZPA1
MODEM: G920FXXU3ZPA1
So this its odex right ??
Any chance to deodex one ??
Sent from my SM-G920F using Tapatalk
Foto [ROM]
Foto Material Theme.
thereassaad said:
So this its odex right ??
Any chance to deodex one ??
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Not yet.
xposed it's possible?
txt11 said:
xposed it's possible?
Click to expand...
Click to collapse
Apparently Wanam's beta works on 6.0.1 :good:
Custom recovery?Twrp for this Rom?
Sorry my bad englisch!!!
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
pp085ster said:
Apparently Wanam's beta works on 6.0.1 :good:
Click to expand...
Click to collapse
How to install?Please...!
txt11 said:
Custom recovery?Twrp for this Rom?
Sorry my bad englisch!!!
---------- Post added at 02:28 PM ---------- Previous post was at 02:25 PM ----------
How to install?Please...!
Click to expand...
Click to collapse
Look here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Can not install custom recovery!Help please...!
txt11 said:
Can not install custom recovery!Help please...!
Click to expand...
Click to collapse
I dont think their is a custom recovery compatible yet. I believe you have to flash the old BL and recovery, use it and then flash back the stock recovery and newsboot. Someone correct me if im wrong
P.S. When I say flash I mean Odin
pp085ster said:
I dont think their is a custom recovery compatible yet. I believe you have to flash the old BL and recovery, use it and then flash back the stock recovery and newsboot. Someone correct me if im wrong
Click to expand...
Click to collapse
Yes, that's right. You flash old bootloader with twrp and install everything you need. Then you need to flash 6.0.1 bootloader to boot the rom.
And thanks to the devoloper! Running this rom flawlessly, it seems quite good battery through.
Kristjan P said:
Yes, that's right. You flash old bootloader with twrp and install everything you need. Then you need to flash 6.0.1 bootloader to boot the rom.
And thanks to the devoloper! Running this rom flawlessly, it seems quite good battery through.
Click to expand...
Click to collapse
likewise here Dev! thanks for making it easy for us :good:
What's been debloated? I like some of the Samsung apps like s-health, s-planner and Samsung backup and restore.
sofir786 said:
What's been debloated? I like some of the Samsung apps like s-health, s-planner and Samsung backup and restore.
Click to expand...
Click to collapse
Delete or update applications that are updated from the Market. The fact that you have listed are not removed.
It makes no sense to release a beta rom on a beta base. I suggest you and all the other users wait until the official mm comes out
Patience...
mrjraider said:
It makes no sense to release a beta rom on a beta base. I suggest you and all the other users wait until the official mm comes out
Patience...
Click to expand...
Click to collapse
The beta programe ends tomorrow ! The final release should be available in stride
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AutoScript for Install MM and Downgrade NT 100% Safe (no bricks, no efs lost)
Unlock Bootloader
Donwload your firmware
Unzip AutoScript and Firmware in the same folder
Power Off device
Conect in Fastboot Mode ( Power Vol - )
Run Script for Flash Firmware or Downgrade Firmware
Enjoy !!!
Download - https://drive.google.com/open?id=0B85AHa9iZYzfdjh0bU05TU1NTk0
core720 said:
AutoScript for Install MM and Downgrade NT 100% Safe (no bricks, no efs lost)
Unlock Bootloader
Donwload your firmware
Unzip AutoScript and Firmware in the same folder
Power Off device
Conect in Fastboot Mode ( Power Vol - )
Run Script for Flash Firmware or Downgrade Firmware
Enjoy !!!
Download - https://drive.google.com/open?id=0B85AHa9iZYzfdjh0bU05TU1NTk0
Click to expand...
Click to collapse
Hello mate, this is for those who updated to noguat via ota and your bootloader is updated to nougat to download to MM? Thanks to see if you make a rom like you did on the bike x 2014
regards
iron maiden said:
Hello mate, this is for those who updated to noguat via ota and your bootloader is updated to nougat to download to MM? Thanks to see if you make a rom like you did on the bike x 2014
regards
Click to expand...
Click to collapse
Yes, use DOWNGRADE script
I tested the downgrade script yesterday. It does his job, but after that there are no OTA's possible because of the missing modem downgrade.
I fixed it for a fully downgrade: https://drive.google.com/file/d/0B134drJ4-Ed0MHQ5aE1wUmp5eFk/view?usp=drivesdk
Use that file only with a unlocked Bootloader!!!!!
I donwngrade and install again firm and ota and perfect no problem
Can we get this to work on the normal moto z?
Thanks so much, works fine. Don't like nugat, too much battery drain and memory use compare to MM, so I'm back to 6.0.1 now
core720 said:
AutoScript for Install MM and Downgrade NT 100% Safe (no bricks, no efs lost)
Unlock Bootloader
Donwload your firmware
Unzip AutoScript and Firmware in the same folder
Power Off device
Conect in Fastboot Mode ( Power Vol - )
Run Script for Flash Firmware or Downgrade Firmware
Enjoy !!!
Download - https://drive.google.com/open?id=0B85AHa9iZYzfdjh0bU05TU1NTk0
Click to expand...
Click to collapse
sorry, I don't understand how to use. my phone it's lock in bootloop
Bootloader unlocked?
core720 said:
Bootloader unlocked?
Click to expand...
Click to collapse
yes, unlocked.
Work?
Did this work even if the bootloader is already on Nougat? Or does this only work on MM bootloaders?
i23u8 said:
Did this work even if the bootloader is already on Nougat? Or does this only work on MM bootloaders?
Click to expand...
Click to collapse
If the phone is unlocked, it should work.
-=MoRpH=- said:
If the phone is unlocked, it should work.
Click to expand...
Click to collapse
My phone is bootloader unlocked. Tried it but not getting past the boot logo. The bootloader version remains the same (nougat) and everything flashes fine.
Did u use the script from the first post? Or the one that I uploaded?
I used the zip from the first post.
I'm now trying the recent batch file you uploaded but it's failing on flashing gpt
---------- Post added at 04:28 PM ---------- Previous post was at 04:22 PM ----------
-=MoRpH=- said:
Did u use the script from the first post? Or the one that I uploaded?
Click to expand...
Click to collapse
It now restarts over and over again and displays "Erasing" with the green Android icon.
I have a Koodo (which is owned by Telus, and on the same tkpca software channel) Moto Z Play, and I've recently sideloaded the Nougat OTA from this thread here. Everything works just fine, but I've realized this might affect me getting future OTAs from my carrier. If I were to download the last Marshmallow firmware from Telus and downgrade using this script, would I run into any issues with this script? Would I run into any issues with OTA updates as well? I'm considering downgrading so I can obtain future OTAs through my carrier again.
Edit: Downgrade to Marshmallow using the included DOWNGRADE FIRMWARE.bat was successful. Thank you very much for writing this script.
This worked for me perfectly, I used @-=MoRpH=-'s version from the comments
Will this work from a stable LOS install? Is it possible to then sideload OTAs?
EDIT: Nevermind, I should learn to read.
It does work for moto z 1650-03?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here We GoWorld Wide Release
*****************************************************************************
Stock N920C Nougat Firmware Links:
All Regions
**: SamMobile Link (Select Your Region and Go)
**: http://live.samsung-updates.com/index.php?device=SM-N920C (Thanks @Or_a) (Select Your Region and Go)
** http://updato.com/firmware-archive-select-model?r=&v=Nougat(Android+7.0)&q=n920c[Fastest] (Select Your Region and Go)
*****************************************************************************
Turkey Exclusive
1: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip (thanks @vysus)
2: http://rapidgator.net/file/363cf2481020b804f3691b02f428b294 (thanks @rohitsinghpu)
3: https://alfafile.net/file/UWKT (thanks @rohitsinghpu)
4: https://simunlockremote.com/galaxy-note-series-firmware/ (thanks @AntonPres)
*****************************************************************************
Note 5 Nougat UI screenshot, Here: http://m.imgur.com/a/IC8K5
*****************************************************************************
Additional:
[Fix] [7.0] Samsung Account Login Password Loop after Rooting on Nougat
S Health App Compromised Error on Nougat:
1) Flash TWRP using odin,
2) Flash supersu using TWRP (Dr Ketan Script)
3) Edit system/build.prop, set ro.config.tima to 0 save and reboot
4) Open SHealth at least once makes sure knox error is gone.
Love it ! But note 5 verizon haven't get it now
lovehtcone said:
Love it ! But note 5 verizon haven't get it now
Click to expand...
Click to collapse
Carriers One have to wait at least one more month
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Can i flash through odin on my N920C indian model?
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
satya_red said:
Can i flash through odin on my N920C indian model?
Click to expand...
Click to collapse
I thinks Get it
Click to expand...
Click to collapse
Can I flash on N920G???
lovehtcone said:
Very slowly.
Ijaz Farooq said:
Carriers One have to wait at least one more month[/QUOTE
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
I thinks Get it
Click to expand...
Click to collapse
On N920C, Yes
but Indian model is N920G
Click to expand...
Click to collapse
israelnobrega said:
Can I flash on N920G???
Click to expand...
Click to collapse
No
Nougat for Note 5 Turkey N920C
http://rapidgator.net/file/363cf2481020b804f3691b02f428b294
https://alfafile.net/file/UWKT
vysus said:
Odin-flashable, rapid link: http://downloadmirror.co/Vvo/TUR-N920CXXU3CQC7-20170317134533.zip
Click to expand...
Click to collapse
Is that official turkey Rom,Isn't it? Can flash via Odin also?
Yep, you can find other mirrors around, is the same files
This is the quicker server at the moment...
What about N920i
N920G, hurry up Samsung!
Deep sleep issue is fixed.
cewrld said:
Deep sleep issue is fixed.
Click to expand...
Click to collapse
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Thanks! Then is no problem if the phone is rooted or not,right? I reset everything from recovery and then flash via odin?
Or is better restore from recovery to MM and then flash? It is my first time and i feel very lost
cewrld said:
Yes, I flashed via Odin (4 files version), but you might need to do factory reset from recovery.
Click to expand...
Click to collapse
Where do You find 4 files Nougat ROM?
Hazel76 said:
Very good news!! If i am in custom now, can i flash stock directly by odin?
Thnx
Click to expand...
Click to collapse
1)No need to restore MM backup from recovery and then flash
2)You can flash it directly using odin, after successfully flashed factory reset your phone through stock recovery
3)Also you can flash it by complete wipe from twrp recovery
4)Since your running custom rom usb debugging and oem unlocking are already eanbled but be sure once before flashing
Note-Be sure Usb debugging And Oem Unlocking options are enabled from developers option before flashing thorugh odin (Go to setting>about device>software info>Tap build no for 7-8 times until you see developers option is enabled, You can find setting>developers option mostly below about device..From there make sure usb debugging and oem unlocking is enabled)
FLASH ONLY IF YOUR DEVICE IS SUPPORTED BY THIS TURKEY BUILD AND FOLLOW PROPER ODIN FLASHING GUIDE YOU CAN FIND EASILY ANYWHERE IN FORUM
Friends !
I am sharing the ZUI 3.5.337 Firmware_Baseband zip file which can be flashed through TWRP.
The zip file updates our device' firmware to ZUI Oreo Firmware and Baseband is updated to 1.70 (Chinese ZUI Oreo Baseband).
Credit to @kubersharma who created this zip file I am sharing his file here with his approval.
Important Points
1. It should be flashed only over Chinese 1.70 and Indian 1.76 Basebands. Do not try flashing over older basebands.
2. Bootloader won't be re-locked.
3. Data/Internal Storage partitions will not be touched in devices which are not Encrypted.
4. The zip can be flashed on Encrypted devices also. But the device has to be reset when booting into system. People who are flashing it on Encrypted devices, do take back up of all files.
I flashed it over Indian Baseband 1.76 and got updated successfully I was encrypted and I had to format my device in TWRP after flashing the zip.
Both Mobile Data and Wi-Fi Signals are stable.
Android File Host Link - https://androidfilehost.com/?fid=962187416754474260
Reserved!
Thanks for posting xD
Anyways I had removed emmc_appsboot from it and it won't lock bootloader thus it'll not soft brick ya phone.
My Observation over 3.5.243' baseband:
JIO signals don't fluctuate
Note:
People on 1.6x or older basebands can try this, but as this doesn't flash emmc_appsboot thus latest firmware partitions with older emmc_appsboot partition from 1.6x baseband or below, "might" ( as I have not tried it ) face a softbrick.
Could you please tell the Baseband version number.
Please tell the baseband number.
jintu jose said:
could you please pose baseband version number.
Click to expand...
Click to collapse
1.70664.3.76387.1
Works 100%!!!
I flash over 1.70 and get better.
Thanks to kubersharma for the good work
Thanks @AndroidEnthusiast & @kubersharma
This was required, because signal fluctuates a lot on Indian nougat baseband
Can be dirty flashed on existing custom Oreo ROM?
Thanks does this work with VOLTE in india since I faced issues with 1.70 baseband while 1.76 works fine.?
This is not a new baseband. This is the baseband from ZUI 2.5.
Screenshot after flashing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This baseband is already available at https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/
deeppaul589 said:
This is not a new baseband. This is the baseband from ZUI 2.5.
Screenshot after flashing.
View attachment 4473647
This baseband is already available at [url]https://zukfans.eu/community/threads/zuk-z2-baseband-collection-versions.4565/[/URL]
Click to expand...
Click to collapse
February's LineageOS 15.1 and April's LineageOS 15.1, the version that is 15.1 is same, but does that mean it is the SAME?
NO, There is a huge difference similarly, Zuk has stopped Changing their baseband versions even though they have updated it on ZUI 3.5 Oreo and now in the latest ZUI OTA of 3.5.337 they had included updated firmware.
Anyways, this Firmware was provided in the latest ZUI OTA UPDATE
kubersharma said:
Reserved!
Thanks for posting xD
Anyways I had removed emmc_appsboot from it and it won't lock bootloader thus it'll not soft brick ya phone.
My Observation over 3.5.243' baseband:
JIO signals don't fluctuate
Note:
People on 1.6x or older basebands can try this, but as this doesn't flash emmc_appsboot thus latest firmware partitions with older emmc_appsboot partition from 1.6x baseband or below, "might" ( as I have not tried it ) face a softbrick.
Click to expand...
Click to collapse
Hey man. Thanks for the zip. I'm in AEX Oreo and running 1.70 Chinese. I had a pretty bad f*ck up with updating to 1.70 (bootloader locked and all). Now, can i dirty flash this file without facing any such issues at all?
Incrovantilist said:
Hey man. Thanks for the zip. I'm in AEX Oreo and running 1.70 Chinese. I had a pretty bad f*ck up with updating to 1.70 (bootloader locked and all). Now, can i dirty flash this file without facing any such issues at all?
Click to expand...
Click to collapse
Yep, you can.
This zip won't lock ya bootloader
kubersharma said:
Yep, you can.
This zip won't lock ya bootloader
Click to expand...
Click to collapse
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only updated baseband?
Incrovantilist said:
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only uodated baseband?
Click to expand...
Click to collapse
Yes
Incrovantilist said:
And Data also left Untouched?
Pretty much what I'm asking is can i just flash this in twrp with no consequences and only updated baseband?
Click to expand...
Click to collapse
The purpose of this thread itself is to let users know and update firmware and baseband to latest ZUI Oreo's in a simple TWRP way !
Thanks a lot man @kubersharma
I just updated and no consequences like you said.
I can still see fluctuations in jio signal but it's lesser than before. I would say this is like 20% improvement over my previous baseband. I appreciate even 5% improvements so this is good for me. Thanks again.
Update:-
My gps broke recently (even before i flashed this) and flashing this has not changed that. Do you have any fix for that in mind? Any help is very much appreciated.
---------- Post added at 06:01 AM ---------- Previous post was at 05:58 AM ----------
Andro Enthusiast said:
The purpose of this thread itself is to let users know and update firmware and baseband to latest ZUI Oreo's in a simple TWRP way !
Click to expand...
Click to collapse
I don't mind simplicity. Last time I updated my baseband through twrp, my bootloader locked and part of my data gone. I had to make sure I didn't get there again.
Incrovantilist said:
I don't mind simplicity. Last time I updated my baseband through twrp, my bootloader locked and part of my data gone. I had to make sure I didn't get there again.
Click to expand...
Click to collapse
This Zip was tested by users in Telegram group. I tested it too and I shared it only after it was successful for me
Good that it worked for you too bro !
Im still facing H+ signal fluctuations in this firmware baseband, flashed the davide baseband over this firmware still fixed the issue. Other than that I guess it's fine
Andro Enthusiast said:
This Zip was tested by users in Telegram group. I tested it too and I shared it only after it was successful for me
Good that it worked for you too bro !
Click to expand...
Click to collapse
It doesn't break volte, right?
Ritik17 said:
It doesn't break volte, right?
Click to expand...
Click to collapse
I don't use Jio and so I can't comment on it.
But as per @kubersharma , the zip doesn't break Volte. But its always better to take backup of EFS partition.