I'm just wondering if any of you have any experience with headphone jack protectors?
I use bluetooth only and my headphone jack catches pocket lint and some dust from time to time, i want to prevent this but i dont want one of those flashy ones that stick out, i'd like to have it be super flush if possible.
I would also love to have something to cover the charging port when not in use? I currently use the stock flip case.
If you want it super-flush … how do you think you'll get this thing out then?
I'd be fine with it never coming out provided it's flush, I don't use wired anything. I purchased generic ones off of Amazon and will see how they are.
Related
I am looking at purchasing this case i was wondering if anyone could give me the run down on it? I ended up buying a tilt becuase i am a tech fan and a hoobiest programmer, a gadget lover, im not a buisness man. I am a commercial electrition during the day and drive pizzas at night. I really love the tilts gps and i use it to listen to podcasts and internet radio in the car. I currently own a leather belt clip case i keep the tilt in most of the time, but im looking for a case solution when im out doing elctrical work. This includes anything from pulling huge cables to digging ditches.
I usually end up going through phones twice a year i beat them up at work pretty bad. I wont be using this monaco as a primary case just while im out in the field. I bascially just need to use my kaiser as a phone and maybe some texting when its in this case. I found the case here http://www.tiltdepot.com/att-tilt-metal-cases.htm the review said it limits the touch screen functionality. So what im wondering is will i be able to still use the creen i mean i just need to be able to use handwriting recognition and some acuall touch support in spb shell and finger based vistual KB's. How does this limit the touch screen?
aA;so how much bulk does this add becuase im also going to need to put the phone in a pouch or something to keep dirt out of the buttons.
I don't have any experience with this case to share I'm afraid. One of the common complaints with metal cases is signal attenuation. You might want to look at one of the Otterbox cases, but you'll still have to pull it out to use the keyboard.
hey buddy. I got a metal case from an australian company called pdair. I've had it since i bought the phone a couple of months ago. It's saved it many times and it doenst hurt the signal at all. BUT, it does have a polycarbonate cover so it does hurt the touchscreen function, but i just use the D-pad anyway. http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Is the outter box 8000 the one for the tilt? can you hear the phone ring in the outerbox.
Christian see im just wondering if the touchscreen works at all how much does it impair the phone? Im not really worried about the signal anyways im not going to be using the phone in this case all the time. I dont plan on surfing the net or anything while im trying to pull wires down 4 stories of building. Just need to be able to send or recive calls and texts. I think i could deal with flipping the case open and using the keyboard but im still curious how well the touch screen works.
boorishid said:
I am looking at purchasing this case i was wondering if anyone could give me the run down on it? I ended up buying a tilt becuase i am a tech fan and a hoobiest programmer, a gadget lover, im not a buisness man. I am a commercial electrition during the day and drive pizzas at night. I really love the tilts gps and i use it to listen to podcasts and internet radio in the car. I currently own a leather belt clip case i keep the tilt in most of the time, but im looking for a case solution when im out doing elctrical work. This includes anything from pulling huge cables to digging ditches.
I usually end up going through phones twice a year i beat them up at work pretty bad. I wont be using this monaco as a primary case just while im out in the field. I bascially just need to use my kaiser as a phone and maybe some texting when its in this case. I found the case here http://www.tiltdepot.com/att-tilt-metal-cases.htm the review said it limits the touch screen functionality. So what im wondering is will i be able to still use the creen i mean i just need to be able to use handwriting recognition and some acuall touch support in spb shell and finger based vistual KB's. How does this limit the touch screen?
aA;so how much bulk does this add becuase im also going to need to put the phone in a pouch or something to keep dirt out of the buttons.
Click to expand...
Click to collapse
in short I say buy this case. I have this same monaco case and I love it. I work in a warehouse mostly sometimes on a roof helping install solar panels and such, much the same as you im sure with the wire everything from #12 to 600mil. I don't do a lot of pulling but am around it all day and conduit and a forklift oh you get te picture.
this case provides the most protection I can imagine and still have the phone functionable. my case hase seen the concrete from about 10 ft and no problems. scratches of coarse but phone was un harmed.
in short great case great protection and a great buy for me I purchased mine about 2 months ago and I paid $14 or so pre ship on ebay.
get it you won't regret it.
(if you do ill buy it from you)
hope this helps.
mrphat, can you still use the touchscreen at all?? that is what i really want to know, how much it limits the touch screen.
I mean im going to need a tuff case no matter what, not so worried about dropping it, but sliding 4 750s over leg while they get tugged down a pipe is enough to crack the screen in a leather case.
The Pdair case protects/covers the whole phone(including touchscreen) but leaves the access features accessible (i.e. D-pad, answer/end buttons, stylus. etc). You can hear the phone very well and at work i just use the D-pad to answer the phone. Since i have an S2U2 all i do is get it out of standby and i can check quick vitals that way. . Whenever i get a text or something like that, i just open the case and use the phone that way.
After looking at the monaco case, it's EXACTLY the same as the pdair case. Both are aluminum and both have the polycarbonate screen protector.
thanks thats what i really needed to know
I originally bought an aluminum case for my Tilt because I wanted the extra protection. In my experience:
* All of the aluminum cases I've seen appear to be pretty much the same. eBay is littered with them for about a quarter of the price that Tilt Depot is charging. Search "Tilt aluminum case"
* You can use about 90% of the device's features with the Dpad and other keys, but you can't dial the phone without opening the cover.
* I did experience about a one-bar loss in signal with the phone in the case vs. the phone not in the case.
* The case that I had was slippery as heck. I wound up attaching a wrist strap to the phone and would never use the device without strapping in first.
* The aluminum case is a little bulky.
I switched to a rubberized case and don't miss the aluminum nearly as much as I thought I would.
You probably need the extra protection for your day job, and the aluminum case will certainly provide it. Trust me, though, trying to flip open the cover and dial the phone one-handed while you're driving is a huge pain in the rear, not to mention dangerous.
well what about these outerbox cases can you hear the phone ring will they fit in your pocket?
I mean im going to have to keep the aluminum case in a pouch anyways beacuse i work in palm springs wich is all desert and any underground work is in sand, so i have an issue with dirt getting in the buttons too. If im going to be taking the phone out of a case to dial might as well take it out of one instead of two.
boorishid said:
mrphat, can you still use the touchscreen at all?? that is what i really want to know, how much it limits the touch screen.
I mean im going to need a tuff case no matter what, not so worried about dropping it, but sliding 4 750s over leg while they get tugged down a pipe is enough to crack the screen in a leather case.
Click to expand...
Click to collapse
questions been pretty much answered I guess and yes the case needs to be opened to use the touch screen , but trust me it is easy to get acustomed to. as the poster said a few posts up it does work well with s2u2 and the dpad.
forgive me if im wrong but is there a otterbox case made for this device specifically?. I know the ones I've seen are pretty generic and very bulky.
I have mine in the case and I purchased a leather pouch for a BB Curve from the Dollar Tree for a buck its real cheap fake leather so I bought like 4 of them. I just slide it in there. the belt clip is sturdy but doesent allow you to set it down and use it. maybe this helps ?
I also agree that pretty much all of the cases (aluminum) are the same I just happen to own the monaco.
Hey guys!I have had my baby for half an year now and it still amazes me what it can do...
I have a screen protector and the original pouch,but when it is in im having a hard time answering a call,so I've wondered what you keep your phones in?Do you put them in your pocket as is or do you atach them to your belt with a pouch or case or something.I dont know why but i have become attached to that peace of metaly plastic...i have kept it safe and it still awaits its first scratch...And just the tought of it scraching terrifies me
The question is pretty much-Does the official sleeve offer some kind of protection,if so what? And how many of you have stopped using it?Is a case for it necessary?
So um thats it pretty much.../discuss
i used the leather pouch and NO screen protector for the first 2 weeks after i purchased the HD2. the leather pouch is stylish and fits snugly but it quickly became impractical for me due to the reasons you have already mentioned. i would have to pull it out of my pocket, then pull it out of the pouch before i could even see who was calling, let alone answer it.
instead, i slapped on a screen protector. most HD2 screen protectors cover practically the ENTIRE FRONT of the device, except for the front buttons. i then put it in a silicon "case" that hugs and covers the rest of the device. essentially, ONLY the front buttons and front speaker grill, camera lens, camera flash, and back speaker grill are exposed to the elements. most silicon cases have sufficient cut outs for the connectors and microphone hole on the bottom edge of the device.
like i said, screen protector+silicon case gives me a device i can safely put in my pocket and have it ready to be used as soon as i pull it out my pocket.
some precautions: try to store the screen facing your thigh if you put your phone in your side pocket like i do. do not put keys and other rough/edgy items in your pocket along with the device, unless you like to tempt fate
bonus feature: i have looped a wrist strap through the cut outs at the bottom of the silicon case. this is handy because the HD2's body itself does NOT have any design element that allows for a wrist strap.
i've been using a brand new HD2 since june 2010 and so far it is in pristine condition, even the exposed front buttons look new.
Otter Box Defender. Best case and holster EVER.
So guys i have gotten a new problem...The proximity sensor doesnt seem to work...So as it is ringing in my pocket it manages somehow to reject/answer/send a message to the caller.It does work when i am in the process of talking while i put it on my ear...Otter than that it is much easier to work without the sleeve...Altough i would expose it to the elements...
Wallet phone!!
Only £3-ish and I love these... Only last 8 months or so before getting tatty, but that's fine. Buy two and by the time they are worn-out, you're ready for a new phone!
http://cgi.ebay.co.uk/Black-Leather..._MobilePhonesCasesPouches&hash=item255f5aef08
(This isn't the exact one I bought, but I couldn't find it today. Search this forum for HD2 wallet and you'll find an old review of mine somewhere)
My headphone jack decided to stop working yesterday. Unless you put pressure on the input wire in a specific way I'm only getting some weird mono sound. Does the same with multiple devices so it's definitely the phone's jack. Pretty pissed, owned smart phones since they became a thing and this has never happened before. For how much money these cost it's disappointing.
Anyway, is the Axon 7 capable of outputting audio to earbuds if I buy one of those Type-C to 3.5mm adapters so I can have a headphone jack again?
ArgonautPollux said:
My headphone jack decided to stop working yesterday. Unless you put pressure on the input wire in a specific way I'm only getting some weird mono sound. Does the same with multiple devices so it's definitely the phone's jack. Pretty pissed, owned smart phones since they became a thing and this has never happened before. For how much money these cost it's disappointing.
Anyway, is the Axon 7 capable of outputting audio to earbuds if I buy one of those Type-C to 3.5mm adapters so I can have a headphone jack again?
Click to expand...
Click to collapse
Yeah, but AFAIK you'll not use the DACs of the phone.
I guess it doesn't hurt to ask, but what do you see when you look at the headphone jack from above? I see 4 small contacts (2 in ine side, 2 in the other). If one is jammed somehow you might be able to use a needle to fix it.
You've got all the right to be pissed, but I'd say the design of the jack is better than jacks of most phones I had before. This one is one closed piece of rubber with the pins coming from the sides. On my other phones the rubber piece was cut above and below, or it didn't have a bottom part, so water could get inside pretty easily...
Again, just check if one of the contacts didn't get jammed there. Otherwise try lubricating the pins just a little with a needle, then push them, see if they spring back to position. Since you described weird mono sound I guess both lower contacts got broken
I'm guessing that's my problem. I see three contacts and then a little nub on the wall on the left side. Guessing a contact used to be there and why if I hold pressure it works.
Figured out which pin it was. It's not broken, it's ever so slightly jammed down into its recess. Can't get it to come back out. That's it, my headphone jack is worthless and my phone has no resale value because of a millimeter of movement by this tiny pin not poking out all the way. Excellent.
How about contacting ZTE? This should definitely be covered by warranty.
Never got into wireless charging on my S7. Always had a magnetic mount on the vent with a metal plate between the phone and the case. Now that I'm hooked on wireless charging, I'm on a similar setup but with a wide ring magnet between phone and case so it doesn't interfere with wireless charging. My one issue is that when the phone is flat on a desk, it rocks just a little (and I like a thin case). So what I'm looking for is a thin case, with an embedded magnet (so it's a flat bottom surface) and where the magnet is in a configuration where it doesn't interfere with wireless charging (whether it's a wide ring, or a few magnet points spaced out, etc.) I've thought about digging into my case as a DIY but not there yet Pitaka MagCase looks like it would so the trick but it hasn't been released yet. Any out there that I'm just not finding?
Thanks!
And, this is on an S9 plus.
Can you post pics of your setup? I'm looking for a magnetic wireless car charger that holds up via the vent.
Sent from my SM-G965U using Tapatalk
thx for the tip.... now i want one too
https://www.ipitaka.com/collections/magcase-for-samsung-galaxy-s9
Search on Amazon for "Magnetic Wireless Car Charger, ELEGIANT Fast Wireless Charging Car Mount Phone Holder". Looks like it's now out of stock but there's dozens just like them. I went with something inexpensive to make sure it worked. And it did- fast charged on the mount as well as the Samsung official desktop wireless charger. Although the swivel ball joint on the vent mount was a little flimsy. I placed the magnetic ring such that the top of it was about 1/4" below the bottom of the fingerprint sensor (I spent a lot of time trying to figure out exactly where the coils in the phone were; you can take a good guess by knowing that the desktop Sammy wireless charger woks with both the phone standing upright as well as on it's side and that it's got two coils).
Even though the ring is very thin, it still adds a slight bulge in the middle and makes it "wobble" a bit. I don't have the right shop equipment to shave a circular channel on the inside of the case to place the magnetic ring
Found one made by Nillkin. Have to use their own charging mount (which makes perfect sense as it uses four small magnets at four corners of the mount). Reviews aren't great, it's standard (not fast) charging, and the I like my side buttons uncovered.
Xvida makes one as well (a little bulkier than the Pitaka) but S8 is the most recent they support as of now.
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
xzr3b0rnzx said:
hey guys,
you might wanna hold off getting the pitaka magmount, I received info from pitaka that the s9+ position of the wireless charging coil of S9 therefore the position of the built-in metal plate is different from other cases, they are still testing there new wireless charging mount, it will come out later.
I will be getting a review unit of the case later and I will let you know how I feel about the case. cheers guys.
Click to expand...
Click to collapse
I have the iOttie magnetic mount/quick charger in my car.
It worked really well with my S8 and note 8.
I put the small metal ring inside the case on my S9+ and it was very finicky.
Sometimes it would only charge (not fast charge) and other times it wouldn't charge at all.
I found that by placing the ring up higher near the camera, it maintained position to quick charge the phone and hold it securely.
The qi coil in the S9+ seems to be a bit closer to the camera than the other devices I've used.
I hope this helps.
Sent from my SM-G965U using Tapatalk
Great- thanks- similar to my current setup- I'm just looking for a case where the ring is actually embedded in the case, so the back of the case is perfectly flat.
Looks like from another thread the S9+ MagCase has launched- not on Amazon yet but on the Pitaka site- would love to see a review to make sure it quick charges wirelessly (as opposed to not quick). Sounds like they had issues with magnet placement originally and that might affect it.
Nillkin makes one. It's on Amazon as well.
y2k1ltd said:
Nillkin makes one. It's on Amazon as well.
Click to expand...
Click to collapse
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
texasmax said:
Yes- thank you- the Nillkin looks great- and a lot less expensive than the Pitaka- but the case has full edges that cover the buttons which I'm not a fan of.
Click to expand...
Click to collapse
Gotcha, it's not bad.
Hello, this may seem a little bit ridiculous but I'm looking for tips on how to properly clean the Axon 7 exterior, including the speaker grills, the 3,5mm jack, and the Type-C port.
I usually use baby wipes on the back and it gets the job done but I don't know if I should use it.
Thanks in advance
joaocandeias said:
Hello, this may seem a little bit ridiculous but I'm looking for tips on how to properly clean the Axon 7 exterior, including the speaker grills, the 3,5mm jack, and the Type-C port.
I usually use baby wipes on the back and it gets the job done but I don't know if I should use it.
Thanks in advance
Click to expand...
Click to collapse
well it sorta is... Water is not gonna kill your phone unless you submerge it. Take some cloth, put water on it, and clean the damn thing. As to the speakers the best way is to take the grills off (but not the cloth below) and clean it. otherwise the stuff is going to stay on the holes.
And the 3.5 can be cleaned with a needle, no finesse needed. i had a lot of stuff inside and the jacks would pop off from time to time, after cleaning it it was like new.
the mic holes are another matter, but you won't break the mics (they are surface mount and they are literally on the other side of the board). There is a piece of cloth (same one than the ones below the grills) at about 2 mm from the outside of the hole. Put a needle there and move it a little.
Choose a username... said:
As to the speakers the best way is to take the grills off (but not the cloth below) and clean it. otherwise the stuff is going to stay on the holes.
Click to expand...
Click to collapse
Thanks for the tips! And sorry if this is really ridiculous but I just had to ask this because my phone gets kinda dirty really quick so yeah... I had to be sure so I don't damage anything.
About the speaker grills, are they easily removable? I don't want to disassemble anything unless it's very easy to do
There are some keyboard cleaning putty that can be used.