Related
Hi everybody,
The Idol 3 community defenitly lack developper supports. How can developpement begin without stock dumps and ramdisk ?
We have he very great index made by @DallasCZ here.
To make a dump, all we need is an uploaded TWRP Backup of your firmware. Here is what I got so far
6045Y - Android 5.0.2 - LRX22G
6045Y_05_LRX22G.tar.xz
6045Y_05_LRX22G_RAMDISK.tar.xz
6045Y_06_LRX22G.tar.xz
6045Y_06_LRX22G_RAMDISK.tar.xz
I hope that some of you will help me complete this thread with the other firmwares, for the other variants...
Cheers
Why don't you use the thread that's already been done?
http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
famewolf said:
Why don't you use the thread that's already been done?
http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
Click to expand...
Click to collapse
Errrr... Because it has nothing to do with it? [emoji14]
Here it's about firmware dump not version tracking
Edit : sorry I didn't saw it, are this firmwares unpacked in flashable zips?
h2o64 said:
Errrr... Because it has nothing to do with it? [emoji14]
Here it's about firmware dump not version tracking
Edit : sorry I didn't saw it, are this firmwares unpacked in flashable zips?
Click to expand...
Click to collapse
They are full Time datestamp directory TWRP backups zipped up with system image and in all the most recent also boot. ie /sdcard/TWRP/BACKUPS/<someid>/This level zipped.
famewolf said:
They are full Time datestamp directory TWRP backups zipped up with system image and in all the most recent also boot. ie /sdcard/TWRP/BACKUPS/<someid>/This level zipped.
Click to expand...
Click to collapse
But I mean, it's not flashable zips like a stock rom flashable zip with deodex
h2o64 said:
But I mean, it's not flashable zips like a stock rom flashable zip with deodex
Click to expand...
Click to collapse
As the directions in the thread indicate and as I have stated, they are TWRP backups from each of the models which is what you ASKED for in post #1. No they are not flashable zip's because alcatel has never released any flashable zips that were not just a bunch of patches.
famewolf said:
As the directions in the thread indicate and as I have stated, they are TWRP backups from each of the models which is what you ASKED for in post #1. No they are not flashable zip's because alcatel has never released any flashable zips that were not just a bunch of patches.
Click to expand...
Click to collapse
Yeah but... That's why the community is made for. Make flashable zips from it, with pre-built gapps, updated Alcatel apps, deodex firmware, source built kernel...
And that's also why this thread is made for.
@h2o64: can you post stock recovery(s) to ? it could be usefull.
Idol 3 6039K stock firmware
The thread that framewolf is referring to seems to be intended only for the Idol3 5.5" (6045 models).
I made a TWRP backup of the Idol3 4.7" 6039K (Dual Sim) stock firmware version 5.0.2-01006. The TWRP backup was made using TWRP image from this thread.
The backup contains Boot + System Image, and can be downloaded from here: Idol347_6039K_TWRP_5.0.2-01006_STOCK.7z.
here backup from twrp, boot + system image, from alcatel idol 3 6039h (single sim), android version 5.0.2-010 06
Code:
http://pc.cd/CTartalK
I need a stock rom or back up from TWRP for 6039y.
I didn't get this thread... famewolf allready started same thread. And we can't get stock firmware untill Alcatel release one. Till then we only have TWRP backups.
DallasCZ said:
I didn't get this thread... famewolf allready started same thread. And we can't get stock firmware untill Alcatel release one. Till then we only have TWRP backups.
Click to expand...
Click to collapse
Then. Could a mod please see this and close?
wiemar said:
here backup from twrp, boot + system image, from alcatel idol 3 6039h (single sim), android version 5.0.2-010 06
This will work on my Alcatel 6039 y? I am from Bulgaria.
Click to expand...
Click to collapse
i think yes because "y" is europe version. im from Poland.
first you need make your backup from twrp
Thanks for help.Now will try it.Its working,but have small bugs.I test it a few days.
Still looking for backup from TWRP for 6039y.
still needs?
Gravedigger730818 said:
Still looking for backup from TWRP for 6039y.
Click to expand...
Click to collapse
still needs?
Yes,still needs stock rom or beck up from TWRP.Thenks!
Gravedigger730818 said:
Yes, still need stock rom or back up from TWRP. Thanks!
Click to expand...
Click to collapse
If you want to revert to Stock ROM for your 6039Y you can use the program "Mobile Upgrade Q". This is software released by TCL (the manufacturer of Alcatel phones). This software wipes the internal memory of your phone and downloads and installs the latest stock firmware including stock recovery.
Latest version of Mobile Upgrade Q is 4.9.2. Download link can be found here: http://forum.xda-developers.com/idol-3/general/idol-3-mobile-upgrade-app-download-t3182517
Notes:
1) Mobile Upgrade Q completely wipes the internal memory of your phone (including internal SD-Card called sdcard0). After using this program your phone is reset to factory default settings (as bought new in the box) and you need to set it up from scratch. So before using this program make a backup of information / files you want to keep.
2) Downloading the stock firmware from the server can take a long time, because the server that is used by TCL has only limited bandwidth. Last time that I used this program the download speed was only something like 20kB/s and it took more than 6 hours before the firmware was downloaded.
EDIT: See this thread for instructions how to use Mobile Upgrade Q.
Hi,
guess this will be more of a review as it is hard to say which feature i like BEST:
Got my MAX 3gb/64gb (helium) delievered yesterday. Since it came with the 7.3 MIUI first thing i had to do was read up on how to install the MIUI8 China dev rom to the device. After a bit of fiddling and translating chinese / indian websites i came up with a workable solution, even with the bootloader locked. So since yesterday evening i got MIUI8 6.6.23 running on the device - weeded out some apps i did not understand (chinese) and installed Play Store.
So far i must say - this phone is glorious. MIUI8 is fast and seemingly stable, i did not come across any big bugs and there doesnt even seem to be the typical micro-stuttering. Im really happy i bought the phone and hoping there will be a multilanguage (i.e. german) MIUI8 for it. For now im perfectly good with the Dev Rom and english localisation.
Thanks Xiaomi!
To anybody interested - flashing the China Development ROM (MIUI 8 6.6.23) with the locked bootloader was not exactly easy, here is how to:
- get the rom image from here: http://en.miui.com/thread-299033-1-1.html (be sure to download the Mi Max Pro fastboot image - 1418mb)
- get MiFlash Beta from here: http://xiaomitips.com/download/new-miflash-beta-one-click-install-miui-fastboot-rom/
- extract tgz fastboot image - keep folder structure!
- enable developer options -> usb debugging in additional settings then turn off phone
- boot phone into EDL mode (phone off, press simultaneously vol+&vol- then connect usb cable)
- open miflash beta - there should be an entry with "id 1" and "device" something like "COM10" in the bottom table now - SEE ATTACHED SCREENSHOTS!
- select the folder where extracted image is located
- tick "clean all" in the bottom right
- hit flash
- enjoy.
First of all, thank you for sharing this. I went step by step (vol up and down didn't work for me, tried power and vol up and device didn't show up in fast boot, did vol down and power and it showed up) then I flashed the image and it successfully flashed, when the device booted it still showed the 7.4.16 global stable Rom the vendor installed : /, I did it again and the same thing, the rom didn't change. could you please help/?
Sorry, I followed the steps exactly as described and it worked out perfectly, thank you very much, its just that when I pressed vol + and - I didn't see anything on the screen so I thought it wasn't working, miui 8 is nice indeed, could you explain how you installed the play store, the one on the Mi store is crashing on me.
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
g_BonE said:
Hi,
Got my MAX 3gb/64gb (helium) delievered yesterday.
Click to expand...
Click to collapse
where you buy the 64 GB Mi Max ?
Greets, Peter
bought it through nis-store.com had it delivered 3 days later. can recommend. they ship with DHL.
Tapatalk on Mi Max
Is it possibile to get it rooted?
e753 said:
Is it possibile to get it rooted?
Click to expand...
Click to collapse
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
memooffon said:
Hi, friends
I bought my first Xiaomi device, it' MI MAX Pro (snapdragon 652) I found other link MIUI 8 China Developer ROM 6.7.7 from en.miui, so I'm very confused what is difference between
MIUI 8 China Developer ROM 6.6.23 link from OP
http://en.miui.com/forum.php?mod=viewthread&tid=306329&extra=page=1&mobile=2
Please advise me.
Thank you.
Click to expand...
Click to collapse
6.6.23 is older (june 23)
6.7.7 is the newest sofar (July 7)
I use the weekly multi rom on my MI Max since its better tuned with translations and the china apps that I don't use are removed
https://xiaomi.eu/community/threads/6-7-7-11.32639/
the process for installing the new Version does not change with the newer miui8 6.7.7 so you're good to go with the same Instructions from OP.
Meanwhile on my Max I have boot loader unlocked and root. Works flawlessly with the new MIUI weekly Releases.
Tapatalk on Mi Max
I am on China stable rom
Already unlocked bootloader
Does official twrp hydrogen work properly with helium model?
nijel8 said:
Nothing is impossible... Unlock bootloader (not even required anymore), flash TWRP, flash latest SuperSu or prerooted ROM... Done.
Click to expand...
Click to collapse
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
s2k7 said:
May we ask you to share your experience for helium.
There are few resources for this device.
Thanx!
Click to expand...
Click to collapse
I have hydrogen but reading the forums people are using same TWRP for helium. Just read XDA and official MIUI forums...
g_BonE said:
it's a little tricky but there is a thread on here that should get you started. you have to use the Google installer and then update some Google components before you restart your phone.
Tapatalk on Mi Max
Click to expand...
Click to collapse
Would you mind pointing that thread where it's explained?
Thanks a lot for you experience sharing,
I was wondering maybe you solved this: i can't get whatsapp to run on this rom, even with all permissions given, whatapps and skype cant access my contacts. I got my contacts on the system using the old google installer apk which worked wonders except now i can't get past the looking for backup screen in whatsapp.
If anyone has ideas pls let me know and in the meanwhile i will try to flash other roms to see if one works..
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
pocketjose said:
Would you mind pointing that thread where it's explained?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=UgdsvrtFji0 follow that! step by step
ispeedca said:
I answered my own question playing with the settings. You have to register under accounts mi accounts to unable contact sync for all apps .... ? anyway it all works now!
BTW I have updated MUIU using http://en.miui.com/download-302.html#446 new dev rom and followed instructions.
Click to expand...
Click to collapse
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
pocketjose said:
Thanks heaps for the tutorial about installing Google Play services
By the way, can this rom you're talking about be flashed following the instructions by original poster?
Do I need to flash in first place the rom from original poster (MIUI 8 6.6.23) and then flash your new one (MIUI 8 6.7.14)?
Or can I flash directly latest one?
Click to expand...
Click to collapse
I can't tell you for sure but i think you have to use the instructions from the muiu site if you want the lastest dev rom.
1- I used OP instructions and links to install muiu 8
2- updated to last china dev rom following muiu site instructions.
3- installed all gapps stuff
PS if you want to ROOT, do this between 2 and 3: (unlocked boot loader)
1-Download SuperSu to root Xiaomi Mi Max and copy it to your phone sd card from this site: http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
2-Download xiaomi twrp flasher and use it to flash from: http://forum.xda-developers.com/mi-max/development/tool-xiaomi-twrp-flasher-mauronofrio-win-t3405207
3-Follow instructions from step 9 : http://www.stechguide.com/root-install-twrp-recovery-xiaomi-mi-max/
Last thing im playing with trying to activate LTE bands on the phone. If anyone can help for that, i can't get the drivers to install propertly
The stable Android Marshmallow 6.0.1 - firmware 1.1.47 update is officially being released Over-The-Air (OTA) starting from 29 March 2017 in the afternoon, here is the announce on the YotaPhone VK page.
Moreover, the main improvements are listed in this official 4pda post by the company YotaDevices. Main changelog can be found in the attachments, but many other new features are explained in the YotaHelp app within MM.
The update will initially arrive by OTA to those with latest RU 134 firmware, later it should be available also on the FTP YotaDevices' server. In the future it will be pushed also to EU firmwares. Keep in mind that for a succesful OTA installation, the phone must be stock, with no /system partition modifications and stock recovery. Root will be lost after the update. As this is a major update, as for every Android phone a clean start is recommended (factory reset). It is not necessary, by the way, things can work fluently even without it.
Found a bug? The company YotaDevices explicitly asked to kindly send them your findings if you wish to help, let's see how.
Find out if the bug is reproducible and notice what are the phone's settings and configuration to make this bug happen;
A useful app for bug reports is this one;
Provide as much detail as you can, with your phone specifications, firmware, version, etc;
To generate bug reports, also the command adb bugreport bugreport.zip can be used while the device is attached to PC with ADB enabled;
If you can't handle native bug report funcion, just provide as much information as you can, maybe with some screenshots;
Send everything to [email protected]
As it is taking a lot of time to update due to many requests handled by their servers, unkernet uploaded the MM update 147. I will attach .torrent files in this post, one is FULL FOTA and another one is OTA from RU 134 to MM. Here there is another mirror for FULL FOTA: GDrive. These files can be pushed manually into the phone (sideloaded) with adb using stock/TWRP recovery (even if sometimes there are errors with custom recoveries such as TWRP). This procedure brings to identical results as an OTA has been installed automatically. Just go into recovery (VOL UP + POWER), select apply update from ADB, connect the phone to PC and with a command prompt opened where adb.exe and the FOTA.zip are located, type: adb devices, which should return a value, then adb sideload FOTA.zip.
How to adb sideload an update (no data loss) @hpnhannghia created a video-guide to update to latest MM build starting from latest RU Lollipop 134, using adb sideload. If you find it useful, you may thank him in this post.
BETA-PROGRAM DETAILS ARE HIDED IN THE SPOILER BELOW, AS THEY ARE NO LONGER RELEVANT.
UPDATE 20/12/16: BETA-TESTING APPLICATIONS ARE NO LONGER ACCEPTED.
As of now the LATEST OFFICIAL MM BETA is 1.1.31. Download links and instructions are in the OP. The 1.1.43 is leaked and YotaDevices said that it is UNSTABLE.
The beta-testing program for Android Marshmallow has begun! The announcement was made officialy by the user YotaDevices on 4pda.ru.
First of all I would like to thank the user @Amplificator who pointed it out here
I will translate and put the announcement below in the spoiler:
Dear friends!
On the eve of one of the most magical and wonderful festivities, our team wants to offer YotaPhone 2 users to participate in the beta testing of a new firmware for the transition to Android 6.0 (Marshmallow) operating system.
You will be able to experience Android 6.0 in action with several new features, and in return we ask you to share with us your comments and suggestions. As part of the beta test on YotaPhone 2 will be sent to upgrade to Android M. But before you decide to participate, please read the instructions below.
The updates that you receive as part of the beta version, may contain errors or defects that significantly affect the operation of the device.
You can always choose from and return to stable public version of the firmware running Android 5.0 Lollipop. However, if your smartphone has already installed a beta version of Android M, then during the rollback, all user data will be deleted permanently.
Participation in the beta available to users who bought YotaPhone 2 on the territory of Russia (in the online shop or at official points). Smartphones currently RU1.1.134 firmware version must be installed.
The beta-version of the firmware on China Yotaphone2 (Model YD206) could be installed incorrectly or with errors. In this case, we are not responsible for the performance of the whole system, so we do not recommend to the users of this model to participate in the test program.
In order to examine your applications to partecipate to the program we need the following information:
IMEI ( "Settings" -> "About phone" -> "General" -> IMEI);
A screenshot of the settings in the "About phone", namely the points "firmware communication module," "kernel version" "Build Number";
Contact information (name, email address, phone number).
Please send the info above with a personal message to the representative of YD 4PDA: YotaDevices
__________end of announcement __________
SENDING FEEDBACK TO YOTA-DEVICES: If you have found a bug that just happened or you can even reproduce it, you can send bug reports here: [email protected] with the function "send bug report" which can be found the Developers option in the Settings. You have to click that function no more than 15minutes as a bug has occurred, and in the email specify as better as possible what you've done to reproduce it, and write your IMEI. [Before sending reports, a clean installation of the latest beta is advised, that is, flashing the latest FOTA and then doing data/dalvik/cache wipes.]
For general support and feature request any YotaPhone user can write to: [email protected]
UPDATE 23/12/16: FOTA OF LATEST BETA VERSION 1.1.28, TO BE INSTALLED STARTING FROM 5.0 RU .134: need to be sideloaded (adb sideload filename.zip) using stock recovery. Download here.
Credits to 4pda user kosvas
UPDATE 25/12/16: TWRP BACKUP OF BETA 6.0.1 firmware 1.1.28: Download link. Unzip it and put the folder into your personal TWRP backup folder, which name is alfanumeric (for example: 025e8b1302684091f). You can find it in your phone: TWRP/BACKUPS/*******. You already have this folder if you created a backup with TWRP in the past. If not, just enter TWRP and create a small backup (of just one partition for example), thus TWRP will create the folder you need. Inside this alfanumeric folder you will put the downloaded file.
Source and credits this 4pda post.
UPDATE 29/12/16: TWRP BACKUP OF BETA 6.0.1 firmware 1.1.30: Download link see instruction above. Source and credits this 4pda post.
Moreover, here there's the OTA 1.1.30 with must be applied from 1.1.28 with stock recovery using adb sideload (you must be unrooted). For your convenience there's also a full FOTA Marshmallow 1.1.28 here which must be used from latest 4.x RU Android version. Source and credits this 4pda post.
UPDATE 10/01/17: FULL ZIP OF BETA 1.1.31: It has to be installed on stock ROM without modifications, using the stock recovery and adb sideload command. link here: FOTA MM. Source: 4pda post The incremental update (from 1.1.30 to 1.1.31) has not been uploaded by anyone, at the moment.
You can use any method you want between these two: adb sideloading the official FOTA with stock recovery OR restoring a clean TWRP backup created by beta-testers.
UPDATE 03/03/17: OTA ZIP of LEAKED 1.1.43: This OTA package has been received by mistake by one of 4pda user, Kazus48; YotaDevices replied saying that this version won't be available to beta-testers due to its instability. Nevertheless, it has been extracted and uploaded by welser. I repeat that installing this OTA is not advised by YotaDevices, do it at your own risk, as it is an internal build. You can find it here: sideload it with stock recovery above 134 Lollipop.
When the beta-program will end the official marshmallow release will be available initially by OTA to any YotaPhone2 with latest RU and EU firmware (no matter which radio or which model (YD201 or YD206).
Take a look at this post to have a brief review of the MM update and to see also some screenshots.
Step-by-step procedure to install a TWRP backup file linked in the OP: Post#113
Complementary information: All-in-One Guide for YotaPhone 2 where every modification to the phone is explained and every aspects covered, a MUST-READ before asking questions: YotaPhone 2 Info
TheArt. said:
Epic news guys!
The beta-testing program for Android Marshmellow has begun! The announcement was made officialy by the user YotaDevices on 4pda.ru.
First of all I would like to thank the user @Amplificator who pointed it out here
I will translate the announcement below:
Dear friends!
On the eve of one of the most magical and wonderful festivities, our team wants to offer YotaPhone 2 users to participate in the beta testing of a new firmware for the transition to Android 6.0 (Marshmallow) operating system.
You will be able to experience Android 6.0 in action with several new features, and in return we ask you to share with us your comments and suggestions. As part of the beta test on YotaPhone 2 will be sent to upgrade to Android M. But before you decide to participate, please read the instructions below.
The updates that you receive as part of the beta version, may contain errors or defects that significantly affect the operation of the device.
You can always choose from and return to stable public version of the firmware running Android 5.0 Lollipop. However, if your smartphone has already installed a beta version of Android M, then during the rollback, all user data will be deleted permanently.
Participation in the beta available to users who bought YotaPhone 2 on the territory of Russia (in the online shop or at official points). Smartphones currently RU1.1.134 firmware version must be installed.
The beta-version of the firmware on China Yotaphone2 (Model YD206) could be installed incorrectly or with errors. In this case, we are not responsible for the performance of the whole system, so we do not recommend to the users of this model to participate in the test program.
In order to examine your applications to partecipate to the program we need the following information:
IMEI ( "Settings" -> "About phone" -> "General" -> IMEI);
A screenshot of the settings in the "About phone", namely the points "firmware communication module," "kernel version" "Build Number";
Contact information (name, email address, phone number).
Please send the info above with a personal message to the representative of YD 4PDA: YotaDevices
Source
If you have troubles with Russian language ask here, I'm russian
Click to expand...
Click to collapse
That's awesome news for us! I am up for testing the beta version. But where do I find his email address??
Same here, realy want to beta test but don't read russian at all (have 201 yota on 1.134ru firmware)
paulzhere said:
That's awesome news for us! I am up for testing the beta version. But where do I find his email address??
Click to expand...
Click to collapse
satsuki_yatoshi said:
Same here, realy want to beta test but don't read russian at all (have 201 yota on 1.134ru firmware)
Click to expand...
Click to collapse
There is no e-mail address, you eighter make a post on that thread with the information (not suggested because you expose your IMEI), or send a private message to the user YotaDevices.
If you don't want to register to 4pda.ru, you may send me a PM here with your info and I'll send it to YotaDevices on 4pda via private message, it could be a solution. If you get involved, you will receive via OTA the beta-update.
In my case I can't partecipate because I've a YD206.
Still need to translate, I guess, but here is post about new beta 6.0.1 with link for download and instructions: 4pda - Andoid M
And here is the post with TWRP backup and with OTA version for loading through adb sideload
Now that is excellent news. Any reports yet - does it work, or is it as flawed as the Android 5.1 upgrade? I would need safetynet to pass and YotaMirror to work, plus the usual stuff (Google Play Store etc).
First impressions: seems very fast and smooth :good:
evilracer123 said:
First impressions: seems very fast and smooth :good:
Click to expand...
Click to collapse
seems cool, do you install it with ota update of the russian forum ? (how ? ^^)
thanks
Guest007 said:
Still need to translate, I guess, but here is post about new beta 6.0.1 with link for download and instructions: 4pda - Andoid M
And here is the post with TWRP backup and with OTA version for loading through adb sideload
Click to expand...
Click to collapse
I may add this in the OP if it's ok for you.
TheArt. said:
I may add this in the OP if it's ok for you.
Click to expand...
Click to collapse
Of cource. Thank you
Hey OP could you translate this please. I think it tells us about bugs but Google translate is terrible.
Сборка предназначена исключительно для внутреннего тестирования, и имеет недоработки, связанные со вторым экраном, а именно:
1) Мало виджетов
2) Кривой YotaMirror
3) Баги с перерисовкой изображения на ВВЭ.
evilracer123 said:
First impressions: seems very fast and smooth :good:
Click to expand...
Click to collapse
Hi , thank you for sharing the first impressions, how is the backscreen working with version 6.0 and battery life ?
Thanks
gorka123 said:
Hi , thank you for sharing the first impressions, how is the backscreen working with version 6.0 and battery life ?
Thanks
Click to expand...
Click to collapse
In post #11 the three issues concern the second screen:
1. few widgets
2.displaying "crooked" image on the EPD display when mirrored
3.buggy drawings on the EPD
nothing mentioned about battery
Oh thanks for the translate. On the 4pda thread, using google translate, it said the system was smoother and faster. Animations are very smooth no lag and that heating issues are significantly less then lollipop update and that it was suitable for everyday use.
I'm going to try update to marshmallow but I may need to install twrp or something since I get the E: Cannot load volume /misc! when sideloading but that's probably because i flashed twrp before.
Any tips on how to fix the error? I'm gonna try use yotaflasher then ota update to 1.134 then sideload marshmallow. That should work right?
i still have 5.1 and it has a few bugs like random black screen on the e-paper display, mediocre battery life and sometimes the keyboard won't type anything
Does 6.0 fix some of these?
LeslieKawiti said:
Oh thanks for the translate. On the 4pda thread, using google translate, it said the system was smoother and faster. Animations are very smooth no lag and that heating issues are significantly less then lollipop update and that it was suitable for everyday use.
I'm going to try update to marshmallow but I may need to install twrp or something since I get the E: Cannot load volume /misc! when sideloading but that's probably because i flashed twrp before.
Any tips on how to fix the error? I'm gonna try use yotaflasher then ota update to 1.134 then sideload marshmallow. That should work right?
Click to expand...
Click to collapse
Yes it does say that the update runs very smooth with no lag, but there are couple of things that have to be be done, before trying to flash to MM:
The phone battery should be no less then 80% charged
ROOT has to be removed, and the recovery has to be STOCK one.
that`s what it says about upgrading to MM on the 4pda site
So if I use that twrp backup will I keep root/xposed/everything I have on my phone?
but how to flash this guys? it is same as we flash lollipop frmware using yotaflasher or like somthing like recovery.. ?
im on RU1.1.134 firmware..
mulderfbi said:
Yes it does say that the update runs very smooth with no lag, but there are couple of things that have to be be done, before trying to flash to MM:
The phone battery should be no less then 80% charged
ROOT has to be removed, and the recovery has to be STOCK one.
that`s what it says about upgrading to MM on the 4pda site
Click to expand...
Click to collapse
Yeah that's what I thought I flashed 5.0.0-RU1.1.124 using yotaflasher and downloading the 1.134 OTA now. After that I'll sideload the marshmallow update and hopefully that works. I'll post and let people here know if it works or not.
Nikolay1243D said:
So if I use that twrp backup will I keep root/xposed/everything I have on my phone?
Click to expand...
Click to collapse
I'm not sure but i'd recommend wiping before updating considering you have root & xposed that'll probably mess with the update and might cause crashes.
Dahlan abdullah said:
but how to flash this guys? it is same as we flash lollipop frmware using yotaflasher or like somthing like recovery.. ?
im on RU1.1.134 firmware..
Click to expand...
Click to collapse
The following are not my instructions. They are taken from the Russian forum at 4pda and are written by "AlexRUS72" so all credit goes to him. I just tried to help with the translation.
After you have latest RUS firmware and you have stock recovery without ROOT and battery charged to at least to 80% you do the following:
1.rename the downloaded file to "yotaphone2.zip" there is a link to the file. (You should have it if you ask how to flash it )
2.put the "yotaphone2.zip" in your working directory where Adb And Fastboot files are
3.turn off the phone
4.you power on the phone by pressing volume up+power buttons and holding it until you enter recovery
5.then connect the phone with the USB cable
6.start Minimal ADB and Fastboot
7.from the recovery menu choose "apply update from ADB"
8.on the PC type "adb sideload yotaphone2.zip" and wait.........
The process takes almost twice the time it takes to flash 5-th version! You have to watch the phone screen for errors. If you see an error that means that it`s not going to work!
And one more time: nobody will be responsible for your actions! You do everything at your own risk!
Hi there, as can you see here https://forum.xda-developers.com/p8lite/development/xepeleato-s-lineageos-14-1-t3542120, from @XePeleato, he did a LineageOS ROM for P8 lite but he want to help us too, so read the post slowly and if you want to test it, go ahead
In Which phones works?
Che2-L03,Che2-L11, Che2-L12, Che2-L23, Che2-UL00, Che2-TL00, G735-L03, G735-L23
Downloads (Always thanks to Xepeleato for helping us, Really)
Experimental Build 1: http://hisiliconroms.pw:8080/4x-1.zip (it doesn't boot)
Experimental Build 2: http://hisiliconroms.pw:8080/4x-2.zip
Installation Instructions (PD: it is hard)
First of all, you need or XePeleato TWRP for P8 lite here http://error404software.com/android/recovery.zip, or TWRP 3.1.0.0 (custom) from Roman Horulsky here https://mega.nz/#!FxwWjJxA!KrLvc85QD9w97ECX3kNRHM5LLWdGLVQix524JnPk5Og
Go here and get the appflasher https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
On http://hwmt.ru/oth/HWFF/info/view.php?find_model=ale-l21 download any rom that is says FULL, and add it to appflasher with the instructions in the post above
On TWRP Mount everything and install the P8 lite ROM (install ZIP)
Then on TWRP. reboot on Bootloader and Install TWRP again
On TWRP, go to Wipe, but before anything, FORMAT DATA (NO WIPE), why would you say? because when you install a p8 lite rom the phone encryptis itself and you can't use/wipe data, and emui data IT IS NOT COMPATIBLE with LineageOS Data
Wipe Cache, Dalvik, Data, Internal and System
Then install the zip posted above
Bugs ATM
Doesn't work:
No RIL on Single SIM Phones (on Double Sims RIL Works)
No Sound
No Bt
It seems it detects the sd card (you can enter to install things and everything, but only from the notification), in short words it isn't visible in media apps
When i connect the headphones the phone doesn't detect it
Record and see videos (.mp4 files)
Can't confirm, but maybe OTG (all of us the testers don't use it)
What works
Wifi (perfectly)
Camera
it seems GPS works
Install apps from explorer
Play store (it shows all the apps)
Dev Options
No problems with root (it needs to be flashed)
Many thins more
You maybe are wondering, why it doesn't boot on G Play/4X, or it has some sort of Wifi Bugs on G Play Mini/4C? because the net card, P8 lite (and probably 4C too but with different model) have a Siliscon Net card, and we 4X users have a Broadcom Netcard, so the romitself it is trying to load a module for a hardware that we don't have, so it doesn't boot
I did this post here, so we don't inundate the P8 Lite topic
if you have questions about this, it is your time to ask! (and if you are a dev, your help is appreciated)
EDIT: first experimental builds are up, see the 3rd page on comments (added pics)
Alright, so later on I'll build a special zip with a compatible kernel. This is going.to be the workflow.
1) You are interested and send me a PM
2) I send you the zip
3) You answer with your device model and whatever you think it's important like:'wifi didn't work, here's a logcat when I try to enable it's
4) I send another zip...
Sent from my FRD-L04 using Tapatalk
@XePeleato Thanks man! anyways so we don't spam your messages, it is better to comment here when you have the build done? or in any time
panchovix said:
@XePeleato Thanks man! anyways so we don't spam your messages, it is better to comment here when you have the build done? or in any time
Click to expand...
Click to collapse
You can comment whenever you want, if you want to post here instead of sending a PM that's fine!
Sent from my FRD-L04 using Tapatalk
I see! well, then as myself, i want to test it when it is avaible haha
@MarcoPLs @Zizo17 if you want a chance, go here lol
Downloading it right now !!
Hope that everything go alright
@Zizo17 XePeleato did send you the rom already? or are you downloading the p8 lite one
panchovix said:
@Zizo17 XePeleato did send you the rom already? or are you downloading the p8 lite one
Click to expand...
Click to collapse
Till now he doesn't , iam downloading p8lite version
IT'S NOT POSSIBLE TO FLASH ON CHE2-L11
I have followed all the instructions (slow method), but flashing is not possible on my Huawei Honor 4x Che2-L11. It stops in the flashing process.
When doing adb sideload, it fails with the error message:
Code:
"E:unknown command [log]
Updater process ended with ERROR: 7"
(this is error message in TWRP, not on laptop)
I have never succeeded in installing CM before, so not surprising that I can't install LineageOS. Nobody has taken care of Che2-L11 so it's total uncertain situation while some claim it works but don't show how. I have followed all the advice, tried all the different TWRP versions, but it always got stuck on "patching system image unconditionally" (with CM 12.1 - P8Lite version). Probably reason might be that they are not wiping everything, but keep some partition but forget to tell me about it. I wipe everything.
We need some common effort to make Che2-L11 versions, work together. I can do my part if we cooperate.
Bob1900 said:
IT'S NOT POSSIBLE TO FLASH ON CHE2-L11
I have followed all the instructions (slow method), but flashing is not possible on my Huawei Honor 4x Che2-L11. It stops in the flashing process.
When doing adb sideload, it fails with the error message:
Code:
"E:unknown command [log]
Updater process ended with ERROR: 7"
(this is error message in TWRP, not on laptop)
I have never succeeded in installing CM before, so not surprising that I can't install LineageOS. Nobody has taken care of Che2-L11 so it's total uncertain situation while some claim it works but don't show how. I have followed all the advice, tried all the different TWRP versions, but it always got stuck on "patching system image unconditionally" (with CM 12.1 - P8Lite version). Probably reason might be that they are not wiping everything, but keep some partition but forget to tell me about it. I wipe everything.
We need some common effort to make Che2-L11 versions, work together. I can do my part if we cooperate.
Click to expand...
Click to collapse
As I said, this is a discussion and not the ROM itself, the ROM for 4X isn't available yet, anyways I put these instructions so you can test it, and your error isn't normal
If you want to try, get the boot.img and flash it, the phone won't boot
I made this discussion for people that are interested on lineage OS and want to try the experimental ROM that will be here soon
And it is weird that cm12.1 failed to you too, me with other users already installed other roms, like this one or cm12.1 and it flashed well
All from us for Honor 4X Che understand your frustration too, since even the other devs here of the 4X (che1) ignore us, but at least now someone want to help us,so we need to support him
And yes it is sad that even a dev from other phone is helping us, the only dev we had sold his phone
Thank you for the answer. Can you tell me what you wiped before flashing the CM 12.1? How did you perform the wipe? With format? I think there must be something remaining when you flash CM 12.1, which I am wiping.
Maybe I am flashing the wrong rom. I don't know that there exists any rom of CM for Che2-L11. The one I am flashing, I had to change the update-script to remove first line. Where is the CM12.1 for Che2-L11? I don't think any exists.
I fully understand the situation with lack of devs. I think it can be improved with some better documentation, for example we can make a separate thread here.
Bob1900 said:
Thank you for the answer. Can you tell me what you wiped before flashing the CM 12.1? How did you perform the wipe? With format? I think there must be something remaining when you flash CM 12.1, which I am wiping.
Maybe I am flashing the wrong rom. I don't know that there exists any rom of CM for Che2-L11. The one I am flashing, I had to change the update-script to remove first line. Where is the CM12.1 for Che2-L11? I don't think any exists.
I fully understand the situation with lack of devs. I think it can be improved with some better documentation, for example we can make a separate thread here.
Click to expand...
Click to collapse
When I install custom Roms, first I install any p8 lite ROM (emui) then flash it, and then I have no problems
Sent from my Che2-UL00
So I should download the rom zip from p8lite thread and pm XePeleato for a compatible kernel for it to boot? Sorry but there's too many instruction. I can't follow btw I'm on b515. Should I use a p8lite rom for it to work?
@ericotena for now he want to test that we users with 4x, all of them doesn't work to see rare things, for example an 4X working
i mean yes download atleast the zip now, and try with those steps, personally i tested using 4X and @MarcoPLs with P8 lite rom, and we made it to test
Xepeleato said it is enought that if you quote him in 1 comment, so he will pm you then with a rom
@XePeleato I want to test it too when it is available haha. Thanks for your efforts on this rom!!!!
@XePeleato I really appreciate your great job and I wish you can help us , our poor Huawei honor 4x users :laugh:
Don't worry, I couldn't PM you yesterday because the build didn't finish (nothing I can do about it). As far as I know, the ROM has to be compatible with Che2-L11, but if there's other more 'compatible' model I'd like to know it, like the ALE-L21 for the P8 lite.
Sent from my FRD-L04 using Tapatalk
XePeleato said:
Don't worry, I couldn't PM you yesterday because the build didn't finish (nothing I can do about it). As far as I know, the ROM has to be compatible with Che2-L11, but if there's other more 'compatible' model I'd like to know it, like the ALE-L21 for the P8 lite.
Click to expand...
Click to collapse
You mean that's the 22/1/2017 realse must be compitable with my model of 4x , if this I can try it , and give you a feedbacj
Zizo17 said:
You mean that's the 22/1/2017 realse must be compitable with my model of 4x , if this I can try it , and give you a feedbacj
Click to expand...
Click to collapse
No, it isn't uploaded yet, but I will upload it as soon as I can
Sent from my FRD-L04 using Tapatalk
XePeleato said:
No, it isn't uploaded yet, but I will upload it as soon as I can
Click to expand...
Click to collapse
Ok .. take your time
You're doing great job my friend
Thanks
Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW
Drunken-warlord said:
Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW
Click to expand...
Click to collapse
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.
Ragarianok said:
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.
Click to expand...
Click to collapse
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
yeshwanthvshenoy said:
Flashing TWRP:
>>> Flashing TWRP or Rooting will void your warranty. Please ask anything before doing, if your not fully confident on what to be done. <<<
Get the TWRP image file from http://forum.xda-developers.com/mot...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
Next, get the adb and mfastboot from https://drive.google.com/file/d/0B5jlU9JnLAZGbVU0UzJ3N3p4X2M/view?usp=sharing
Unzip the file and place the image file inside the extracted folder.
Reboot to Bootloader (power off, then press the power and volume down buttons simultaneously).
Open a new command prompt or terminal window and do the following:
Code:
mfastboot flash recovery twrp_*version*_athene.img
Rooting Device:
>>> The old guide is outdated. Will be updated shortly. <<<
Click to expand...
Click to collapse
Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Sorry for being so short earlier. We have quite a few members here who constantly post issues without using the search function.
You can try to post I quoted above to flash TWRP. It's fairly straight forward.
Are you planning on flashing a Nougat ROM or are you going the adventurous route and flashing an Oreo ROM? The TWRP version mentioned in the quoted post should be fine for flashing Nougat and 32-bit based Oreo ROMs, but you'll need 64-bit TWRP for 64-bit Oreo ROMs.
Use this as a reference for 32-bit and 64-bit Oreo ROMs: https://forum.xda-developers.com/moto-g4-plus/how-to/oreo-roms-table-t3717226
64-bit TWRP: https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206
Once you've flashed TWRP, you can either flash different versions through TWRP itself or through the Play Store app.
As far as ROMs, I'd recommend Official Lineage OS 14.1 for Nougat: https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101
And I'd recommend Official AICP 13.1 for Oreo: https://forum.xda-developers.com/mo...om-aicp-13-1-o-8-1-0-official-weekly-t3731269 (You'll need to download the 20180212 build since most recent builds either have a broken camera or won't boot.)
Any other questions, don't hesitate to ask.
Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Hello and welcome, Please have a look in each device forum for a newbie help thread https://forum.xda-developers.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598 where you can ask questions that are repeatedly asked and where you'll be guided to the right threads to help you further :good:
This keeps the forum clean and everything at a glance so you'll be find easily topics
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
If you want 64bit Oreo roms it's a little bit different
1. Unlock the bootloader
2. Flash a 64 bit version of twrp
2.a Take a backup and safe it off your phone
3. Flash a Oreo 64bit custom ROM
3.a flash gapps package arm64 (8.0 or 8.1 depending on rom version)
4. Flash magisk 15.3
If you want to root the stock nougat rom steps 1-4 of your list are correct.
Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
Not quite. You'll want to go in this order:
1. Unlock bootloader
2. Flash TWRP
3. Backup
4. Wipe (Wipe/Advanced Wipe; ART/Dalvik, System, Data, Cache)
5. Flash ROM
6. Flash Gapps
7. Reboot
8. Go through setup wizard and let everything settle for ~10 minutes
9. Boot into TWRP and flash SuperSU or Magisk (I would suggest Magisk), then flash kernel and reboot
You'll need to flash the unofficial 64-bit TWRP mentioned in my previous post to flash a 64-bit Oreo ROM, otherwise you'll get an error message when flashing ROM.
You'll also need to use unofficial Gapps since there aren't any official Gapps for 8.1 just yet. I'd recommend either mini or micro here: https://sourceforge.net/projects/unofficial-opengapps-8-1/files/arm64/20180225/
You should be able to flash the most recent Magisk located here: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
If you do flash a custom kernel, I'd highly suggest Frostbitten: https://forum.xda-developers.com/mo...s-frostbitten-kernel-moto-g4-g4-plus-t3649155
@strongst
Just noticed that you posted a similar set of instructions and now I feel like a goober.
Ragarianok said:
Just noticed that you posted a similar set of instructions and now I feel like a goober.
Click to expand...
Click to collapse
What's a goober there are every time different ways users must decide which one to choose :laugh:
strongst said:
What's a goober there are every time different ways users must decide which one to choose :laugh:
Click to expand...
Click to collapse
In this context, it basically means I did something silly.
Ragarianok said:
In this context, it basically means I did something silly.
Click to expand...
Click to collapse
Nope you didn't
@strongst @Ragarianok
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW
Drunken-warlord said:
@[email protected]
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW
Click to expand...
Click to collapse
Thanks, you're welcome :good:
Ota ? ..... Was it jan security patch update ?
pang12345 said:
Ota ? ..... Was it jan security patch update ?
Click to expand...
Click to collapse
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147
echo92 said:
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147
Click to expand...
Click to collapse
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .
pang12345 said:
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .
Click to expand...
Click to collapse
That is true, however for our devices we have generally been issued the same security patch level regardless of region. It may be different builds for particular regions (e.g NPJS25.93-14-13 for India, Brazil and EU, and NPJ25.93-14.7-3 for US) but they are both the December 2017 security patch.
Regardless, we've still yet to see an OTA newer than December.
@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?
Drunken-warlord said:
@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?
Click to expand...
Click to collapse
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.
Ragarianok said:
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.
Click to expand...
Click to collapse
I went through that before posting my question .. the paper does not help .
Is it okey if I flash the twrp that you have mentioned over the existing twrp?
Thanks and regards
DW
Edit : I have restored my backup but still the same issue.
Edit : flashed the official TWRP . still the same results
EDIT : After 3 hours + Countless reboots the issue solved on its own ... I am not sure what really happened.. lol
Thanks for the Support
DW