The stable Android Marshmallow 6.0.1 - firmware 1.1.47 update is officially being released Over-The-Air (OTA) starting from 29 March 2017 in the afternoon, here is the announce on the YotaPhone VK page.
Moreover, the main improvements are listed in this official 4pda post by the company YotaDevices. Main changelog can be found in the attachments, but many other new features are explained in the YotaHelp app within MM.
The update will initially arrive by OTA to those with latest RU 134 firmware, later it should be available also on the FTP YotaDevices' server. In the future it will be pushed also to EU firmwares. Keep in mind that for a succesful OTA installation, the phone must be stock, with no /system partition modifications and stock recovery. Root will be lost after the update. As this is a major update, as for every Android phone a clean start is recommended (factory reset). It is not necessary, by the way, things can work fluently even without it.
Found a bug? The company YotaDevices explicitly asked to kindly send them your findings if you wish to help, let's see how.
Find out if the bug is reproducible and notice what are the phone's settings and configuration to make this bug happen;
A useful app for bug reports is this one;
Provide as much detail as you can, with your phone specifications, firmware, version, etc;
To generate bug reports, also the command adb bugreport bugreport.zip can be used while the device is attached to PC with ADB enabled;
If you can't handle native bug report funcion, just provide as much information as you can, maybe with some screenshots;
Send everything to [email protected]
As it is taking a lot of time to update due to many requests handled by their servers, unkernet uploaded the MM update 147. I will attach .torrent files in this post, one is FULL FOTA and another one is OTA from RU 134 to MM. Here there is another mirror for FULL FOTA: GDrive. These files can be pushed manually into the phone (sideloaded) with adb using stock/TWRP recovery (even if sometimes there are errors with custom recoveries such as TWRP). This procedure brings to identical results as an OTA has been installed automatically. Just go into recovery (VOL UP + POWER), select apply update from ADB, connect the phone to PC and with a command prompt opened where adb.exe and the FOTA.zip are located, type: adb devices, which should return a value, then adb sideload FOTA.zip.
How to adb sideload an update (no data loss) @hpnhannghia created a video-guide to update to latest MM build starting from latest RU Lollipop 134, using adb sideload. If you find it useful, you may thank him in this post.
BETA-PROGRAM DETAILS ARE HIDED IN THE SPOILER BELOW, AS THEY ARE NO LONGER RELEVANT.
UPDATE 20/12/16: BETA-TESTING APPLICATIONS ARE NO LONGER ACCEPTED.
As of now the LATEST OFFICIAL MM BETA is 1.1.31. Download links and instructions are in the OP. The 1.1.43 is leaked and YotaDevices said that it is UNSTABLE.
The beta-testing program for Android Marshmallow has begun! The announcement was made officialy by the user YotaDevices on 4pda.ru.
First of all I would like to thank the user @Amplificator who pointed it out here
I will translate and put the announcement below in the spoiler:
Dear friends!
On the eve of one of the most magical and wonderful festivities, our team wants to offer YotaPhone 2 users to participate in the beta testing of a new firmware for the transition to Android 6.0 (Marshmallow) operating system.
You will be able to experience Android 6.0 in action with several new features, and in return we ask you to share with us your comments and suggestions. As part of the beta test on YotaPhone 2 will be sent to upgrade to Android M. But before you decide to participate, please read the instructions below.
The updates that you receive as part of the beta version, may contain errors or defects that significantly affect the operation of the device.
You can always choose from and return to stable public version of the firmware running Android 5.0 Lollipop. However, if your smartphone has already installed a beta version of Android M, then during the rollback, all user data will be deleted permanently.
Participation in the beta available to users who bought YotaPhone 2 on the territory of Russia (in the online shop or at official points). Smartphones currently RU1.1.134 firmware version must be installed.
The beta-version of the firmware on China Yotaphone2 (Model YD206) could be installed incorrectly or with errors. In this case, we are not responsible for the performance of the whole system, so we do not recommend to the users of this model to participate in the test program.
In order to examine your applications to partecipate to the program we need the following information:
IMEI ( "Settings" -> "About phone" -> "General" -> IMEI);
A screenshot of the settings in the "About phone", namely the points "firmware communication module," "kernel version" "Build Number";
Contact information (name, email address, phone number).
Please send the info above with a personal message to the representative of YD 4PDA: YotaDevices
__________end of announcement __________
SENDING FEEDBACK TO YOTA-DEVICES: If you have found a bug that just happened or you can even reproduce it, you can send bug reports here: [email protected] with the function "send bug report" which can be found the Developers option in the Settings. You have to click that function no more than 15minutes as a bug has occurred, and in the email specify as better as possible what you've done to reproduce it, and write your IMEI. [Before sending reports, a clean installation of the latest beta is advised, that is, flashing the latest FOTA and then doing data/dalvik/cache wipes.]
For general support and feature request any YotaPhone user can write to: [email protected]
UPDATE 23/12/16: FOTA OF LATEST BETA VERSION 1.1.28, TO BE INSTALLED STARTING FROM 5.0 RU .134: need to be sideloaded (adb sideload filename.zip) using stock recovery. Download here.
Credits to 4pda user kosvas
UPDATE 25/12/16: TWRP BACKUP OF BETA 6.0.1 firmware 1.1.28: Download link. Unzip it and put the folder into your personal TWRP backup folder, which name is alfanumeric (for example: 025e8b1302684091f). You can find it in your phone: TWRP/BACKUPS/*******. You already have this folder if you created a backup with TWRP in the past. If not, just enter TWRP and create a small backup (of just one partition for example), thus TWRP will create the folder you need. Inside this alfanumeric folder you will put the downloaded file.
Source and credits this 4pda post.
UPDATE 29/12/16: TWRP BACKUP OF BETA 6.0.1 firmware 1.1.30: Download link see instruction above. Source and credits this 4pda post.
Moreover, here there's the OTA 1.1.30 with must be applied from 1.1.28 with stock recovery using adb sideload (you must be unrooted). For your convenience there's also a full FOTA Marshmallow 1.1.28 here which must be used from latest 4.x RU Android version. Source and credits this 4pda post.
UPDATE 10/01/17: FULL ZIP OF BETA 1.1.31: It has to be installed on stock ROM without modifications, using the stock recovery and adb sideload command. link here: FOTA MM. Source: 4pda post The incremental update (from 1.1.30 to 1.1.31) has not been uploaded by anyone, at the moment.
You can use any method you want between these two: adb sideloading the official FOTA with stock recovery OR restoring a clean TWRP backup created by beta-testers.
UPDATE 03/03/17: OTA ZIP of LEAKED 1.1.43: This OTA package has been received by mistake by one of 4pda user, Kazus48; YotaDevices replied saying that this version won't be available to beta-testers due to its instability. Nevertheless, it has been extracted and uploaded by welser. I repeat that installing this OTA is not advised by YotaDevices, do it at your own risk, as it is an internal build. You can find it here: sideload it with stock recovery above 134 Lollipop.
When the beta-program will end the official marshmallow release will be available initially by OTA to any YotaPhone2 with latest RU and EU firmware (no matter which radio or which model (YD201 or YD206).
Take a look at this post to have a brief review of the MM update and to see also some screenshots.
Step-by-step procedure to install a TWRP backup file linked in the OP: Post#113
Complementary information: All-in-One Guide for YotaPhone 2 where every modification to the phone is explained and every aspects covered, a MUST-READ before asking questions: YotaPhone 2 Info
TheArt. said:
Epic news guys!
The beta-testing program for Android Marshmellow has begun! The announcement was made officialy by the user YotaDevices on 4pda.ru.
First of all I would like to thank the user @Amplificator who pointed it out here
I will translate the announcement below:
Dear friends!
On the eve of one of the most magical and wonderful festivities, our team wants to offer YotaPhone 2 users to participate in the beta testing of a new firmware for the transition to Android 6.0 (Marshmallow) operating system.
You will be able to experience Android 6.0 in action with several new features, and in return we ask you to share with us your comments and suggestions. As part of the beta test on YotaPhone 2 will be sent to upgrade to Android M. But before you decide to participate, please read the instructions below.
The updates that you receive as part of the beta version, may contain errors or defects that significantly affect the operation of the device.
You can always choose from and return to stable public version of the firmware running Android 5.0 Lollipop. However, if your smartphone has already installed a beta version of Android M, then during the rollback, all user data will be deleted permanently.
Participation in the beta available to users who bought YotaPhone 2 on the territory of Russia (in the online shop or at official points). Smartphones currently RU1.1.134 firmware version must be installed.
The beta-version of the firmware on China Yotaphone2 (Model YD206) could be installed incorrectly or with errors. In this case, we are not responsible for the performance of the whole system, so we do not recommend to the users of this model to participate in the test program.
In order to examine your applications to partecipate to the program we need the following information:
IMEI ( "Settings" -> "About phone" -> "General" -> IMEI);
A screenshot of the settings in the "About phone", namely the points "firmware communication module," "kernel version" "Build Number";
Contact information (name, email address, phone number).
Please send the info above with a personal message to the representative of YD 4PDA: YotaDevices
Source
If you have troubles with Russian language ask here, I'm russian
Click to expand...
Click to collapse
That's awesome news for us! I am up for testing the beta version. But where do I find his email address??
Same here, realy want to beta test but don't read russian at all (have 201 yota on 1.134ru firmware)
paulzhere said:
That's awesome news for us! I am up for testing the beta version. But where do I find his email address??
Click to expand...
Click to collapse
satsuki_yatoshi said:
Same here, realy want to beta test but don't read russian at all (have 201 yota on 1.134ru firmware)
Click to expand...
Click to collapse
There is no e-mail address, you eighter make a post on that thread with the information (not suggested because you expose your IMEI), or send a private message to the user YotaDevices.
If you don't want to register to 4pda.ru, you may send me a PM here with your info and I'll send it to YotaDevices on 4pda via private message, it could be a solution. If you get involved, you will receive via OTA the beta-update.
In my case I can't partecipate because I've a YD206.
Still need to translate, I guess, but here is post about new beta 6.0.1 with link for download and instructions: 4pda - Andoid M
And here is the post with TWRP backup and with OTA version for loading through adb sideload
Now that is excellent news. Any reports yet - does it work, or is it as flawed as the Android 5.1 upgrade? I would need safetynet to pass and YotaMirror to work, plus the usual stuff (Google Play Store etc).
First impressions: seems very fast and smooth :good:
evilracer123 said:
First impressions: seems very fast and smooth :good:
Click to expand...
Click to collapse
seems cool, do you install it with ota update of the russian forum ? (how ? ^^)
thanks
Guest007 said:
Still need to translate, I guess, but here is post about new beta 6.0.1 with link for download and instructions: 4pda - Andoid M
And here is the post with TWRP backup and with OTA version for loading through adb sideload
Click to expand...
Click to collapse
I may add this in the OP if it's ok for you.
TheArt. said:
I may add this in the OP if it's ok for you.
Click to expand...
Click to collapse
Of cource. Thank you
Hey OP could you translate this please. I think it tells us about bugs but Google translate is terrible.
Сборка предназначена исключительно для внутреннего тестирования, и имеет недоработки, связанные со вторым экраном, а именно:
1) Мало виджетов
2) Кривой YotaMirror
3) Баги с перерисовкой изображения на ВВЭ.
evilracer123 said:
First impressions: seems very fast and smooth :good:
Click to expand...
Click to collapse
Hi , thank you for sharing the first impressions, how is the backscreen working with version 6.0 and battery life ?
Thanks
gorka123 said:
Hi , thank you for sharing the first impressions, how is the backscreen working with version 6.0 and battery life ?
Thanks
Click to expand...
Click to collapse
In post #11 the three issues concern the second screen:
1. few widgets
2.displaying "crooked" image on the EPD display when mirrored
3.buggy drawings on the EPD
nothing mentioned about battery
Oh thanks for the translate. On the 4pda thread, using google translate, it said the system was smoother and faster. Animations are very smooth no lag and that heating issues are significantly less then lollipop update and that it was suitable for everyday use.
I'm going to try update to marshmallow but I may need to install twrp or something since I get the E: Cannot load volume /misc! when sideloading but that's probably because i flashed twrp before.
Any tips on how to fix the error? I'm gonna try use yotaflasher then ota update to 1.134 then sideload marshmallow. That should work right?
i still have 5.1 and it has a few bugs like random black screen on the e-paper display, mediocre battery life and sometimes the keyboard won't type anything
Does 6.0 fix some of these?
LeslieKawiti said:
Oh thanks for the translate. On the 4pda thread, using google translate, it said the system was smoother and faster. Animations are very smooth no lag and that heating issues are significantly less then lollipop update and that it was suitable for everyday use.
I'm going to try update to marshmallow but I may need to install twrp or something since I get the E: Cannot load volume /misc! when sideloading but that's probably because i flashed twrp before.
Any tips on how to fix the error? I'm gonna try use yotaflasher then ota update to 1.134 then sideload marshmallow. That should work right?
Click to expand...
Click to collapse
Yes it does say that the update runs very smooth with no lag, but there are couple of things that have to be be done, before trying to flash to MM:
The phone battery should be no less then 80% charged
ROOT has to be removed, and the recovery has to be STOCK one.
that`s what it says about upgrading to MM on the 4pda site
So if I use that twrp backup will I keep root/xposed/everything I have on my phone?
but how to flash this guys? it is same as we flash lollipop frmware using yotaflasher or like somthing like recovery.. ?
im on RU1.1.134 firmware..
mulderfbi said:
Yes it does say that the update runs very smooth with no lag, but there are couple of things that have to be be done, before trying to flash to MM:
The phone battery should be no less then 80% charged
ROOT has to be removed, and the recovery has to be STOCK one.
that`s what it says about upgrading to MM on the 4pda site
Click to expand...
Click to collapse
Yeah that's what I thought I flashed 5.0.0-RU1.1.124 using yotaflasher and downloading the 1.134 OTA now. After that I'll sideload the marshmallow update and hopefully that works. I'll post and let people here know if it works or not.
Nikolay1243D said:
So if I use that twrp backup will I keep root/xposed/everything I have on my phone?
Click to expand...
Click to collapse
I'm not sure but i'd recommend wiping before updating considering you have root & xposed that'll probably mess with the update and might cause crashes.
Dahlan abdullah said:
but how to flash this guys? it is same as we flash lollipop frmware using yotaflasher or like somthing like recovery.. ?
im on RU1.1.134 firmware..
Click to expand...
Click to collapse
The following are not my instructions. They are taken from the Russian forum at 4pda and are written by "AlexRUS72" so all credit goes to him. I just tried to help with the translation.
After you have latest RUS firmware and you have stock recovery without ROOT and battery charged to at least to 80% you do the following:
1.rename the downloaded file to "yotaphone2.zip" there is a link to the file. (You should have it if you ask how to flash it )
2.put the "yotaphone2.zip" in your working directory where Adb And Fastboot files are
3.turn off the phone
4.you power on the phone by pressing volume up+power buttons and holding it until you enter recovery
5.then connect the phone with the USB cable
6.start Minimal ADB and Fastboot
7.from the recovery menu choose "apply update from ADB"
8.on the PC type "adb sideload yotaphone2.zip" and wait.........
The process takes almost twice the time it takes to flash 5-th version! You have to watch the phone screen for errors. If you see an error that means that it`s not going to work!
And one more time: nobody will be responsible for your actions! You do everything at your own risk!
Related
Hi,
It will probably take some time until I'll get my phone, but I am trying to understand how to start.
I am OK with having only English on my phone, but I would prefer to have a clean and bloat free rom that has the GAPPS and that can get OTA updates.
I want to do the minimum needed to get this, I really don't want to change roms every other week.
How should I start? I am a bit lost.
Is the Chinese rom that bad?
Should I change the rom and root it?
Thanks in advance,
Asaf
I think this should be in the Q&A forum
It sounds like you want a stable ROM with Gapps. Xiaomi offer several ROM types. If you want Gapps included from the start, you want their stable international ROM. The trouble is that at the moment they don't do one for the XRN2 yet. Head over to en.miui.com, pick a phone that has been around for longer and in the download section for that device you will see the different ROM types (there are tabs at the top of each phone section). There are also a couple of great explanatory pages in their forum that guide you through the different ROM types.
Use the xiaomi.eu ROM. Multilanguage, clean and with Gapps. OTA also included
Sent from my Redmi Note 2 using Tapatalk
First, get TWRP installed in your phone.
Then flash a stable rom
At the end, install proper gapp using TWRP.
Thanks.
So
1. Install TWRP, will this link should be enough to install it? http://en.miui.com/thread-156838-1-1.html
2. Go to http://xiaomi.eu --> ROMs DOWNLOAD and take the DOWNLOAD WEEKLY rom (http://miuif.celogeek.com/5.9.10/xiaomi.eu_multi_hermes_5.9.11_v7-5.0.zip)?
shemsha said:
Thanks.
So
1. Install TWRP, will this link should be enough to install it? http://en.miui.com/thread-156838-1-1.html
2. Go to http://xiaomi.eu --> ROMs DOWNLOAD and take the DOWNLOAD WEEKLY rom (http://miuif.celogeek.com/5.9.10/xiaomi.eu_multi_hermes_5.9.11_v7-5.0.zip)?
Click to expand...
Click to collapse
BUT, you said you don't want to have to flash a new ROM every week. The xiaomi.EU weekly ROMs are a beta ROM, they are not the same as the 'stable' ROM. I'm using the weekly version just fine, but there are a few bugs. This ROM may or may not suit your needs. Please be aware of that As soon as Xiaomi release the official stable International ROM with Gapps, that's the one you want (based on your stated requirements).
Thanks
So perhaps I'll wait, hopefully it will come up soon enough.
Hope the Chinese rom isn't too bad...
shemsha said:
Thanks
So perhaps I'll wait, hopefully it will come up soon enough.
Hope the Chinese rom isn't too bad...
Click to expand...
Click to collapse
The first ROM I flashed was the stable ROM from MIUI.com. At the moment this is available as Chinese only (with only Chinese and English languages on board). It is also MIUI version 6 not 7. You do not need TWRP installed to flash this. You can just download it straight to internal storage, then use the Xiaomi updater app (which is already on the phone) to manually flash it. This ROM is not rooted.
Next I tried the weekly ROM from MIUI.com. At that point I incorrectly thought that it would be multi language, but it wasn't. It did at least have MIUI 7 on board though. TWRP is also not needed to flash this. This ROM is rooted. Root settings can be accessed via the Security app. You can also install SuperSU, grant it root access, then use it to control the root access of other apps if you wish. There are no Google apps on board. I was on n holiday at the time so I manually placed all the relevant files, set permissions and so on using ES File explorer that I side loaded and granted root privileges to. Yes, my girlfriend thought it was very romantic of me to spend a whole evening split between doing this and hunting some particularly aggressive mosquitoes trapped in our room. Only the best for my love.
Finally I downloaded the latest weekly (not stable) ROM from from Xiaomi.EU. As well as being a beta, it is not an official Xiaomi ROM. They do also have a stable ROM in offer, but it is not rooted. Basic Google apps are installed. TWRP is not needed here either. However, I installed it briefly to make a full backup of my phone, and a separate backup of the NVRAM portion of the device where the IMEI resides. Experience tells me this is important on an MTK phone in case the area becomes corrupt during an incorrect flash. You can also use SPFlash Tools to do this from a computer. Google the process, it's well worth being prepared. Damian Parsons over on GizBeat and China Phone Arena has done some useful tutorials with videos. Make sure you have the right version of SPFlash tools (which is not the same as MTKdroidtools -or something like that). I have only used a couple of times with my first two MTK phones so I don't know what version you need to use with this chipset.
For my purposes NONE of these ROMs actually fit the bill. Why? Because none of them so far allow me to select UK English as the default language or select the UK as the region I'm in. It's a small thing, but the last three Chinese phones I've had all suffered from the same problem. I end up rooting and using More Locales app to create a new default language code over and above selecting UK English in Google keyboard.
Once Xiaomi release an official global ROM the download page for the Note 2 will look like in the attached screenshot which shows the Mi4 page. Note the two tabs at the top, global and Chinese, in addition to the 'stable' and 'developer' sections down the left hand side.
Please somebody correct me if I'm wrong because I'm new to Xiaomi devices
Thanks for the detailed response.
Sounds like that for my purposes, and until an official rom is out, the easiest option is either the latest weekly or stable from xiaomi.eu.
I understand they can be installed using xiaomi updater as well?
Yes, you can install them the same way as official ROMs.
shemsha said:
Thanks for the detailed response.
Sounds like that for my purposes, and until an official rom is out, the easiest option is either the latest weekly or stable from xiaomi.eu.
I understand they can be installed using xiaomi updater as well?
Click to expand...
Click to collapse
Also, when I received my phone there was a lot of non-MIUI related bloatware and possibly malware on board. It was multi language (with UK English as a built in option) but it all felt wrong, slow and dodgy. Reading elsewhere it was recommended the best thing to do was flash a ROM from a PC using the fastboot method to erase everything, then start from there. There are fastboot ROMs with instructions on the en.miui.com site. If you think you need to, you could flash via fastboot, then download your subsequent choice of ROM from xiaomi.EU and flash that however you please. As I was away (and impatient) I didn't do the first flash via fastboot. I just did a full wipe from the stock recovery, then put a ROM into internal memory, then flashed it from the stock recovery, then factory reset again. No idea if that was sufficient, but there's no sign of the extra apps any more.
You don't need TWRP
Sent from my Redmi Note 2 using Tapatalk
Ouzo said:
I installed it briefly to make a full backup of my phone, and a separate backup of the NVRAM portion of the device where the IMEI resides. Experience tells me this is important on an MTK phone in case the area becomes corrupt during an incorrect flash. You can also use SPFlash Tools to do this from a computer. Google the process, it's well worth being prepared. Damian Parsons over on GizBeat and China Phone Arena has done some useful tutorials with videos. Make sure you have the right version of SPFlash tools (which is not the same as MTKdroidtools -or something like that). I have only used a couple of times with my first two MTK phones so I don't know what version you need to use with this chipset.
For my purposes NONE of these ROMs actually fit the bill. Why? Because none of them so far allow me to select UK English as the default language or select the UK as the region I'm in. It's a small thing, but the last three Chinese phones I've had all suffered from the same problem. I end up rooting and using More Locales app to create a new default language code over and above selecting UK English in Google keyboard.
Click to expand...
Click to collapse
Thanks for the info, this is great for me. I will follow what you said regarding backing up this NVRAM you speak of, as I just read that the source code for the Helios X10 has been released, so we can expect more people including members of the HTC M9+ forum playing around with code.
It would be nice to have an option for UK English (or Australian English for me, to be precise) however I haven't noticed much of a difference, maybe because I have Swiftkey installed and that already has the correct language setting.
zan5hin said:
Thanks for the info, this is great for me. I will follow what you said regarding backing up this NVRAM you speak of, as I just read that the source code for the Helios X10 has been released, so we can expect more people including members of the HTC M9+ forum playing around with code.
It would be nice to have an option for UK English (or Australian English for me, to be precise) however I haven't noticed much of a difference, maybe because I have Swiftkey installed and that already has the correct language setting.
Click to expand...
Click to collapse
Changing the language to UK English is only part of the problem for me. Basically the phone thinks I'm in the U.S, or rather, that I have a U.S phone in the UK. This can cause problems within apps that want tailor content to my region code (or even deny me content). I've tried editing the build.prop a little, but it doesn't seem to help.
Mobile Uncle tools (free in Play Store) used to be able to back up one's IMEI number, but it didn't work on this phone. Dunno if that's because it runs lollipop. Anyway, that's why TWRP was handy and I will try using SPFlashTools again at some point.
Hi, here is the official link for our Mate8 OTA update.
[NXT-L29C185B160]
Code:
[Changelog]
This update helps reduce system power consumption, improve stability, and incorporates the latest Google security patches. Please update your device for improved experience.
[New]
Added the Google Now on Tap feature.
Introduced the Huawei Health app.
[Optimization]
Optimized the adjustable color temperature range.
Reduced system power consumption and improved stability.
Improved device security with the latest Google security patches.
[Update notes]
1. Before the update, make sure your phone is not rooted. If you experience any issues during the update, please go to http://consumer.huawei.com/ or an authorized service center for assistance.
2. This update will not erase your personal data.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/hw/eu/update_data_hw_eu.zip][hw/eu][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/hw/eu/update_data_full_hw_eu.zip][full hw/eu][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/hw/normal/update_data_hw_normal.zip][hw/normal][/url][url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/hw/normal/update_data_full_hw_normal.zip][full hw/normal][/url]
[NXT-L09C432B152]
Code:
[changelog]
This update improves system performance and stability. Please update your device for improved experience.
[Highlights]
1. Added the Google Now on Tap feature.
2. Improved device security with the latest Google patches.
3. Optimized power consumption and stability.
4. Fixed an issue where WeChat was consuming battery power too quickly.
[Update notes]
1. Make sure your phone has not been rooted before updating. If you experience any issues during the update, please visit the Huawei Support website or contact your local service center for assistance.
2. This update will not erase your personal data.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/hw/eu/update_data_hw_eu.zip][hw/eu][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/hw/eu/update_data_full_hw_eu.zip][full hw/eu][/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/hw/normal/update_data_hw_normal.zip[hw/normal][/url] [url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/hw/normal/update_data_full_hw_normal.zip[full hw/normal][/url]
[NXT-L29C432B152]
Code:
[Changelog]
Dear User,
This update will improve your device's performance and stability to bring you a better user experience. You are recommended to install it.
[Update tips]
1. Make sure your phone has not been rooted before updating. If you experience any issues during the update, please visit the Huawei Support website or contact your local service center for assistance.
2. This update will not erase your personal data.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/hw/eu/update_data_hw_eu.zip][hw/eu][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/hw/eu/update_data_full_hw_eu.zip][full hw/eu]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/hw/normal/update_data_hw_normal.zip[hw/normal][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/hw/normal/update_data_full_hw_normal.zip[full hw/normal][/url]
Complete list of available address. Please keep in mind we dont know all about them, some are redundant, some seem same but are not. Only HUAWEI know the exact difference.
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/changelog.xml[/url] NXT-L29C185B160
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42230/f2/full/changelog.xml[/url] NXT-L29C185B160
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42466/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42472/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42474/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42488/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42967/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42987/f2/full/changelog.xml[/url] NXT-L09C432B152
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43012/f2/full/changelog.xml[/url] NXT-L29C185B162
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43020/f2/full/changelog.xml[/url] NXT-L29C185B162
For NXT-AL version (chinese)
NXT-AL10C00B156
Code:
[changelog]
Dear customers, this update improved experience of system stability and compatibility of some third-party apps. involved latest Google patch,
Please update your device for improved experience.
Improved color temperature adjustment
Improved system stability.
Improved strategy of network selection.
Optimized the compatibility of some third-party apps.
Improved security of system.
Improved experience of short message.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/all/cn/update_data_all_cn.zip][all/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/all/cn/update_data_full_all_cn.zip][full all/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/cmcc/cn/update_data_cmcc_cn.zip][cmcc/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/cmcc/cn/update_data_full_cmcc_cn.zip][full cmcc/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/dualcu/cn/update_data_dualcu_cn.zip][dualcu/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/dualcu/cn/update_data_full_dualcu_cn.zip][full dualcu/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/telecom/cn/update_data_telecom_cn.zip][telecom/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/telecom/cn/update_data_full_telecom_cn.zip][full telecom/cn][/url]
NXT-AL10C00B163
Code:
[changelog]
Dear customers, this update improved experience of camera and system performance. involved latest Google patch, Please update your device for improved experience.
Optimized experience of camera.
Improved system performance.
Improved security of system.
Improved system stability.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/all/cn/update_data_all_cn.zip][all/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/all/cn/update_data_full_all_cn.zip][full all/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/cmcc/cn/update_data_cmcc_cn.zip][cmcc/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/cmcc/cn/update_data_full_cmcc_cn.zip][full cmcc/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/dualcu/cn/update_data_dualcu_cn.zip][dualcu/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/dualcu/cn/update_data_full_dualcu_cn.zip][full dualcu/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/telecom/cn/update_data_telecom_cn.zip][telecom/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/telecom/cn/update_data_full_telecom_cn.zip][full telecom/cn][/url]
NXT-AL10C00B165
Code:
[changelog]
Dear customers, this update improved experience of WLAN. Please update your device for improved experience.
Optimized experience of WLAN.
Links
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/update.zip][common][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/all/cn/update_data_all_cn.zip][all/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/all/cn/update_data_full_all_cn.zip][full all/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/cmcc/cn/update_data_cmcc_cn.zip][cmcc/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/cmcc/cn/update_data_full_cmcc_cn.zip][full cmcc/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/dualcu/cn/update_data_dualcu_cn.zip][dualcu/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/dualcu/cn/update_data_full_dualcu_cn.zip][full dualcu/cn][/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/telecom/cn/update_data_telecom_cn.zip][telecom/cn][/url] [url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/telecom/cn/update_data_full_telecom_cn.zip][full telecom/cn][/url]
Code:
Complete list
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42073/f1/full/changelog.xml]NXT-AL10C00B156[/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42464/f1/full/changelog.xml]NXT-AL10C00B156[/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42494/f1/full/changelog.xml]NXT-AL10C00B156[/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42665/f1/full/changelog.xml]NXT-AL10C00B163[/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v42913/f1/full/changelog.xml]NXT-AL10C00B156[/url]
[url=http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43307/f1/full/changelog.xml]NXT-AL10C00B165[/url]
Thanks for your input.
You could put the links of the Chinese rom Model AL10
A greeting.
L29 B162, nice thx a lot for posting this! what i dont get: how come there is a differentiation between hw/eu, incremental update and full update? makes no sense that theres no full version clocking in at 1GB+...
edit: nvm, stupid question lets hope we can either just flash that update over an existing B152 rom or that we get our hands on a full B162 rom soon
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Mate 8
L29 c185b103
Can install
C185b161
is that a question or a statement...?
Did anyone get the b162?
Sent from a mobile gadget...
oh hey, wait a second! the "common" links DO have zip files that are 1.4 GB in size! those are the complete roms!
example: http://update.hicloud.com:8180/TDS/...2227/f2/full/hw/eu/update_data_full_hw_eu.zip
for the L29 B160 rom
HA, now i definitely know what im gonna update to this weekend
edit: ok downloading the B160 L29 rom right now, ill try the same with B162, lets see how that goes....
lionheart1910 said:
Mate 8
L29 c185b103
Can install
C185b161
Click to expand...
Click to collapse
I download b153 but icant flash on
C185b103 .
Sent from my HUAWEI NXT-L29 using Tapatalk
behroozexe said:
I download b153 but icant flash on
C185b103 .
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Isn't normal zip. You must flash with update.app in dload directory of your internal/external memory.
I read on your sign that you have L29, please can you help here
http://forum.xda-developers.com/showpost.php?p=65395673&postcount=25
acer73 said:
Isn't normal zip. You must flash with update.app in dload directory of your internal/external memory.
I read on your sign that you have L29, please can you help here
http://forum.xda-developers.com/showpost.php?p=65395673&postcount=25
Click to expand...
Click to collapse
Tnx alot bro .i use this metod but in stock recovery after 5% fali.i think because my region is middle east i cant flash it.its true?
Sent from my HUAWEI NXT-L29 using Tapatalk
behroozexe said:
Tnx alot bro .i use this metod but in stock recovery after 5% fali.i think because my region is middle east i cant flash it.its true?
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Yes this is the problem
i also have trouble getting the complete rom downloaded. make sure to check the initial size shown for the update package and what the final size is! could very well be that ure trying to flash an incomplete update package
acer73 said:
Yes this is the problem
Click to expand...
Click to collapse
Did you try flash the full update.zip with twrp?
Try it
Yes ...by update.app it's working for me ...thanks
Guys you have to take some precaution, while iam sure these link are 100% trustable, iam not sure what we can download or not and for what exact hardware its related to.
There is some question that i have still in suspend like:
- what mean "common" for them? Is that file is enough for "eu" and "normal"?
- what mean exacly in NXT-L29C432B152 the "C432". I saw some exotic number like "NXT-DL00C17B156" woot???
- Why my NXT-L29 are downloading something in a place that seem more for NXT-L09 ?
So well be careful i dont want to see more bricked device
bova said:
Thanks for your input.
You could put the links of the Chinese rom Model AL10
A greeting.
Click to expand...
Click to collapse
I will do some research but as i dont have an AL10 version iam not sure i will able to find those links.
Everything working good with me except themes
Not applying
It's tell me theme applying but not
jbmc83 said:
oh hey, wait a second! the "common" links DO have zip files that are 1.4 GB in size! those are the complete roms!
example: http://update.hicloud.com:8180/TDS/...2227/f2/full/hw/eu/update_data_full_hw_eu.zip
for the L29 B160 rom
HA, now i definitely know what im gonna update to this weekend
edit: ok downloading the B160 L29 rom right now, ill try the same with B162, lets see how that goes....
Click to expand...
Click to collapse
The link you built is not working because the name of the file is not same for that version
Remember to refer to the filelist.xml -> http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/filelist.xml to get the name.
Also check the changelog.xml to verify the version http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v42227/f2/full/changelog.xml
Then you'll see the name is update_data_full_hw_meafnaf.zip and the url is http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
or http://update.hicloud.com:8180/TDS/...full/hw/normal/update_data_full_hw_normal.zip
posted a wrong link, but ure correct actually trying a different link but only got the B162 OTA update package thus far. the full package always stops downloading at random time intervalls.....
link: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43020/f2/full/update.zip
if anyone could get the full package of 1.4 GB that would be nice
jbmc83 said:
posted a wrong link, but ure correct actually trying a different link but only got the B162 OTA update package thus far. the full package always stops downloading at random time intervalls.....
link: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v43020/f2/full/update.zip
if anyone could get the full package of 1.4 GB that would be nice
Click to expand...
Click to collapse
Here it is
so it worked in your case and u uploaded it again to a file sharer? crazy stuff, thx a ton buddy
now im curious to see if this package is in any way flashable... ill check it out this weekend
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Hi fellows.
I've coded something using latest Yota SDK v3. Compilation does not give any error but the apk doesn't run on my Yota device and I think it's because the SDK v3 is not installed on it.
The details. As said, I compile successfuly using the SDK according actual instructions at yota web site, using:
dependencies
{
provided "com.yotadevices.libs.public:sdk:3.7.+"
}
(Which does not include the library onto the APK, yes, correct).
If I use the "false" condition at manifest file to do not require the library in the device <uses-library android:name="com.yotadevices.sdk" android:required="false"/> then the app is installed but it crashes saying the new Yota classes (like EpdIntentCompat and Epd are not found.
So I've deduced I don't have the library of the SDK v3 installed because if android:required="true" then I get the error INSTALL_FAILED_MISSING_SHARED_LIBRARY
My device is YD201 with Android 5.0 Build number LRX21M.5.0.0-HK1.1.124d (no system updates pending)
I read at Yota developer's web site that first requirement to use new v3 SDK is "1. Ensure that latest Android M software is installed;" and I assumed it was only at Android SDK but then you can target/install the App on Android 5.0, mainly because Android M is not yet released for Yota ¿?
So, what can I do?
Ps. BTW I would gladly code using SDK 2 but I can't find any documentation on Yota's site ¿?
Thanks!!
Heey, what are you making?
And well the documentation says it: you need android marshmallow for it to work. Your HK version phone will not update automatically to it. You would have to follow a guide to first get to 1.1.134 RU while keeping radio/modem unchanged and then install the latest marshmallow update. Thats what I did. But the process can be difficult and dangerous if you are not used to flashing phones.
Hi!
Well, I'm used to flash ROMs but I expect it will be automatically updated at some point, I hope after a while the MM updated will be rolled to other versions of YD201 than just RU (since I received the 5.0 as well). Anyway, I will manually flash it if not, no problem.
I've made an app and widget to display all notifications on EPD, which I miss on 4.4/5.0 but I think it will be useless on new MM version since it is already included as I've read, so...
tomgaga said:
Heey, what are you making?
And well the documentation says it: you need android marshmallow for it to work. Your HK version phone will not update automatically to it. You would have to follow a guide to first get to 1.1.134 RU while keeping radio/modem unchanged and then install the latest marshmallow update. Thats what I did. But the process can be difficult and dangerous if you are not used to flashing phones.
Click to expand...
Click to collapse
Ok, I answer myself: yes, with Android 6.0 MM it works, the SDK v3 is included here. I've sideload updated my device to MM and it works now.
juliancarney said:
Ok, I answer myself: yes, with Android 6.0 MM it works, the SDK v3 is included here. I've sideload updated my device to MM and it works now.
Click to expand...
Click to collapse
Great!
Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW
Drunken-warlord said:
Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW
Click to expand...
Click to collapse
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.
Ragarianok said:
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.
Click to expand...
Click to collapse
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
yeshwanthvshenoy said:
Flashing TWRP:
>>> Flashing TWRP or Rooting will void your warranty. Please ask anything before doing, if your not fully confident on what to be done. <<<
Get the TWRP image file from http://forum.xda-developers.com/mot...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
Next, get the adb and mfastboot from https://drive.google.com/file/d/0B5jlU9JnLAZGbVU0UzJ3N3p4X2M/view?usp=sharing
Unzip the file and place the image file inside the extracted folder.
Reboot to Bootloader (power off, then press the power and volume down buttons simultaneously).
Open a new command prompt or terminal window and do the following:
Code:
mfastboot flash recovery twrp_*version*_athene.img
Rooting Device:
>>> The old guide is outdated. Will be updated shortly. <<<
Click to expand...
Click to collapse
Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Sorry for being so short earlier. We have quite a few members here who constantly post issues without using the search function.
You can try to post I quoted above to flash TWRP. It's fairly straight forward.
Are you planning on flashing a Nougat ROM or are you going the adventurous route and flashing an Oreo ROM? The TWRP version mentioned in the quoted post should be fine for flashing Nougat and 32-bit based Oreo ROMs, but you'll need 64-bit TWRP for 64-bit Oreo ROMs.
Use this as a reference for 32-bit and 64-bit Oreo ROMs: https://forum.xda-developers.com/moto-g4-plus/how-to/oreo-roms-table-t3717226
64-bit TWRP: https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206
Once you've flashed TWRP, you can either flash different versions through TWRP itself or through the Play Store app.
As far as ROMs, I'd recommend Official Lineage OS 14.1 for Nougat: https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101
And I'd recommend Official AICP 13.1 for Oreo: https://forum.xda-developers.com/mo...om-aicp-13-1-o-8-1-0-official-weekly-t3731269 (You'll need to download the 20180212 build since most recent builds either have a broken camera or won't boot.)
Any other questions, don't hesitate to ask.
Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Hello and welcome, Please have a look in each device forum for a newbie help thread https://forum.xda-developers.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598 where you can ask questions that are repeatedly asked and where you'll be guided to the right threads to help you further :good:
This keeps the forum clean and everything at a glance so you'll be find easily topics
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
If you want 64bit Oreo roms it's a little bit different
1. Unlock the bootloader
2. Flash a 64 bit version of twrp
2.a Take a backup and safe it off your phone
3. Flash a Oreo 64bit custom ROM
3.a flash gapps package arm64 (8.0 or 8.1 depending on rom version)
4. Flash magisk 15.3
If you want to root the stock nougat rom steps 1-4 of your list are correct.
Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
Not quite. You'll want to go in this order:
1. Unlock bootloader
2. Flash TWRP
3. Backup
4. Wipe (Wipe/Advanced Wipe; ART/Dalvik, System, Data, Cache)
5. Flash ROM
6. Flash Gapps
7. Reboot
8. Go through setup wizard and let everything settle for ~10 minutes
9. Boot into TWRP and flash SuperSU or Magisk (I would suggest Magisk), then flash kernel and reboot
You'll need to flash the unofficial 64-bit TWRP mentioned in my previous post to flash a 64-bit Oreo ROM, otherwise you'll get an error message when flashing ROM.
You'll also need to use unofficial Gapps since there aren't any official Gapps for 8.1 just yet. I'd recommend either mini or micro here: https://sourceforge.net/projects/unofficial-opengapps-8-1/files/arm64/20180225/
You should be able to flash the most recent Magisk located here: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
If you do flash a custom kernel, I'd highly suggest Frostbitten: https://forum.xda-developers.com/mo...s-frostbitten-kernel-moto-g4-g4-plus-t3649155
@strongst
Just noticed that you posted a similar set of instructions and now I feel like a goober.
Ragarianok said:
Just noticed that you posted a similar set of instructions and now I feel like a goober.
Click to expand...
Click to collapse
What's a goober there are every time different ways users must decide which one to choose :laugh:
strongst said:
What's a goober there are every time different ways users must decide which one to choose :laugh:
Click to expand...
Click to collapse
In this context, it basically means I did something silly.
Ragarianok said:
In this context, it basically means I did something silly.
Click to expand...
Click to collapse
Nope you didn't
@strongst @Ragarianok
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW
Drunken-warlord said:
@[email protected]
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW
Click to expand...
Click to collapse
Thanks, you're welcome :good:
Ota ? ..... Was it jan security patch update ?
pang12345 said:
Ota ? ..... Was it jan security patch update ?
Click to expand...
Click to collapse
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147
echo92 said:
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147
Click to expand...
Click to collapse
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .
pang12345 said:
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .
Click to expand...
Click to collapse
That is true, however for our devices we have generally been issued the same security patch level regardless of region. It may be different builds for particular regions (e.g NPJS25.93-14-13 for India, Brazil and EU, and NPJ25.93-14.7-3 for US) but they are both the December 2017 security patch.
Regardless, we've still yet to see an OTA newer than December.
@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?
Drunken-warlord said:
@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?
Click to expand...
Click to collapse
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.
Ragarianok said:
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.
Click to expand...
Click to collapse
I went through that before posting my question .. the paper does not help .
Is it okey if I flash the twrp that you have mentioned over the existing twrp?
Thanks and regards
DW
Edit : I have restored my backup but still the same issue.
Edit : flashed the official TWRP . still the same results
EDIT : After 3 hours + Countless reboots the issue solved on its own ... I am not sure what really happened.. lol
Thanks for the Support
DW
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, as only a few versions of unbrick tool are available here and that they allow to rollback to specific versions of Oxygen OS I decided to search for more and succeeded in that.
As the instructions and Qualcomm drivers are already available here, I don't feel a need to rewrite them.
You can ask questions here on how to use and issues, however I might not be able to answer immediately.
Here are the files uploaded on AndroidFileHost ordered by Android version:
ANDROID 9:
OOS 9.0.6
OOS 9.0.5
OOS 9.0.4
ANDROID 8:
OOS 5.0.8
OOS 5.0.6
OOS 5.0.5
OOS 5.0.4
OOS 5.0.3
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
Happy unbricking
Credits:
@Titokhan for giving advice on how to present thread
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost
@AndroidFileHost for the hosting
OnePlus for the device and OS
Reserved -v1
hey man, could you add OOS 9.0.2 unbrick tool now that the Android 9 update has been released for 3T.
em4viki said:
hey man, could you add OOS 9.0.2 unbrick tool now that the Android 9 update has been released for 3T.
Click to expand...
Click to collapse
Hi, I would like to but as of now, it looks like there is no EDL image available based on Pie
Added first Pie unbrick tool based on OOS 9.0.4
em4viki said:
hey man, could you add OOS 9.0.2 unbrick tool now that the Android 9 update has been released for 3T.
Click to expand...
Click to collapse
Hey, look at above
what is password for 3.5.4?
andivivaldi said:
what is password for 3.5.4?
Click to expand...
Click to collapse
Hi, as I said in original post I don't have it but share it in the hope that someone will be able to bruteforce it and share it decrypted
Hi
Will this be helpful if I want to rollback the official 9.0.4 update to 5.0.8?
bldysabba said:
Hi
Will this be helpful if I want to rollback the official 9.0.4 update to 5.0.8?
Click to expand...
Click to collapse
Hi, yes you can rollback to 5.0.8 using 5.0.8 MSM tool
@Some_Random_Username how much time does it take to flash 9.0.4?
Mine is taking more than 10 min - its stuck at param preprocessing.
Edit- got it working.
step 1. download and install driver - https://androidfilehost.com/?fid=11410963190603879743
step 2. reboot pc.
step 3. connect oneplus device in edl mode.
step 4. pc installs driver again.
step 5. run msm tool for 9.0.4 and install.
Added OOS 9.0.5 unbrick tool
Hi. Thanks for sharing all the links. I"m trying to download DECRYPTED OOS 5.0.3 and it's really slow (like 40KBPS). Is it possible to upload these files to a different host? Thanks!
mugenishere said:
Hi. Thanks for sharing all the links. I"m trying to download DECRYPTED OOS 5.0.3 and it's really slow (like 40KBPS). Is it possible to upload these files to a different host? Thanks!
Click to expand...
Click to collapse
Unfortunately no as I do not know any other provider hosting for free such an amount of files (I have same thread for OP3/5/5T/6/6T/7/7 Pro).
You could however select the mirror the more near to your location when downloading via AFH to get a faster download speed.
Some_Random_Username said:
Unfortunately no as I do not know any other provider hosting for free such an amount of files (I have same thread for OP3/5/5T/6/6T/7/7 Pro).
You could however select the mirror the more near to your location when downloading via AFH to get a faster download speed.
Click to expand...
Click to collapse
I tried it again from another server and this time it downloaded at 9MBPS! I got the file!
Thanks a load for sharing all these files! The normal "unbrick your phone" by flashing Android 6 wasn't working for me. From your link I was able to download the file for Android 8 (Oxygen 5.0.3). And it worked! My phone got unbricked finally!
A note to everyone: For whomever the earlier unbrick step doesn't work, you need to try downloading some other Oxygen OS (different Android version than the one you tried earlier).
I'm going to make a post in the main "unbrick" thread and let other people know about this. Once again, thanks a lot for posting these files and saving my phone!
Some_Random_Username said:
Hi, yes you can rollback to 5.0.8 using 5.0.8 MSM tool
Click to expand...
Click to collapse
@Some_Random_Username ... i am guessing the procedure to unbrick is the same as in this thread ... right ?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
aiamuzz said:
@Some_Random_Username ... i am guessing the procedure to unbrick is the same as in this thread ... right ?
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
Click to expand...
Click to collapse
Except that normally you shouldn't need to turn off driver signature enforcement and that drivers should automatically be downloaded and installed if you're on Windows 10 that's it yeah.
Some_Random_Username said:
Except that normally you shouldn't need to turn off driver signature enforcement and that drivers should automatically be downloaded and installed if you're on Windows 10 that's it yeah.
Click to expand...
Click to collapse
thanks @Some_Random_Username ... it was a breeze ... my windows 100 let me flash it effortlessly without having to turn off driver signature enforcement feature ... can't thank you enough for this thread which collates the various versions that are directly flashable ... its a delight to get back directly to the latest official ROM and the MSM software is smooth no issues there ... i believe this is MSM software is akin the the RSD light Motorola devices have !!!
Hope you are able to update this thread with all future official upgrade versions !!!
Did you repack this tool kit for Android Pie yourself ?
aiamuzz said:
thanks @Some_Random_Username ... it was a breeze ... my windows 100 let me flash it effortlessly without having to turn off driver signature enforcement feature ... can't thank you enough for this thread which collates the various versions that are directly flashable ... its a delight to get back directly to the latest official ROM and the MSM software is smooth no issues there ... i believe this is MSM software is akin the the RSD light Motorola devices have !!!
Hope you are able to update this thread with all future official upgrade versions !!!
Did you repack this tool kit for Android Pie yourself ?
Click to expand...
Click to collapse
Well, not to be pessimistic but firstly OnePlus would need to deliver one last update for this device as November is when they should drop support as per their software maintenance schedule thread https://forums.oneplus.com/threads/oneplus-software-maintenance-schedule.862347/ .
No, I didn't repack it for Pie by myself, I just managed to get it from OnePlus.
Some_Random_Username said:
Well, not to be pessimistic but firstly OnePlus would need to deliver one last update for this device as November is when they should drop support as per their software maintenance schedule thread https://forums.oneplus.com/threads/oneplus-software-maintenance-schedule.862347/ .
No, I didn't repack it for Pie by myself, I just managed to get it from OnePlus.
Click to expand...
Click to collapse
thanks for sharing the latest updates for OP3T (9.0.6) ... you are pretty prompt at it ... good work !!!
will look forward to the MSM unbrick tool for this latest version ... hopefully you'll be able to get your hands on it soon !!!