Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Never ever install chain fire 3d ...ï installed same problem UK what I did?...flashed only recovery and restored a backup...
---------- Post added at 02:18 PM ---------- Previous post was at 02:17 PM ----------
speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Use only gl tools. ...http://forum.xda-developers.com/android/apps-games/app-gltools-1-29-t2828630
---------- Post added at 02:23 PM ---------- Previous post was at 02:18 PM ----------
speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Listen download jellybean or kitkat ...u can't flash a rom through stock recovery I used ctr for kitkat....u can only flash through SP tools...never give ur phone to a service center for software problems...They say motherboard issue always and charge ..its a way of making money...ull find drivers for ur phone sorry I can't help u there but mmx a110/ vcom driver guess should work I'm not sure ...ï don't remember the driver ï used ....just flash after formatting and chill out..everything will be fine if u lose ur imei...use wifi download mobile uncle tools and replace ...
---------- Post added at 02:25 PM ---------- Previous post was at 02:23 PM ----------
Please note ..Flashed only recovery means custom ctr recovery not stock ..u can't restore a backup from stock. ..
Thanks all..but i have already flashed..
Thanks all,
I could not wait for replies so had to rush for more information on the topic. After few hiccups i downloaded and installed drivers for my mobile from this site. Then i used SP tool to flash JB on my device. It all about the order of steps: select scatter file in SP tools, press download, remove battery from bricked mobile, insert battery after 15 secs. , plug through usb cable to pc, files will be flashed automatically, press ok wherever required, a green tick appears which means its done. Then i started my phone and it worked.
Then i had the courage to upgrade to KK FOTA. I saved it on my SD card. And i flashed cwd recovery though mobile uncle tool and flashed rom from custom recovery. But sorry to say but my phone was soft bricked again to logo screen :crying::crying: when i rebooted. I went into cwd recovery and again flashed JB.
Then i downloaded CleanKat to SD Card. Again flashed KKFOTA but after first boot i rebooted this time into recovery and flashed CleanKat..and it has been working.
CleanKat is a great ROM.
Thanks to XDA once again.
All the softwares needed had been downloaded from xda site only.
Searching for graphically efficient ROM..any ideas
Presently i have been searching on fastest ROM on this device. And that too for gaming. Do you guys have any idea about ROM which is best for gaming on this device
Should i start a new thread for this discussion?
Related
Hi all,
I have d802 international version.
I have installed Phil's recovery and rebooted on it and wanted to install a new rom but i did erase everything on SDcard!
however i still can acces to download mode and recovery.
No rom can be installed as i can t mount sdcard and all have been erased on it.
I have tried to install drivers but not all of them seem to install. I have tried with flashtool with the rom downloaded but i have error...
Can u help saving my G2 please.
Thx
riyadhuae said:
Hi all,
I have d802 international version.
I have installed Phil's recovery and rebooted on it and wanted to install a new rom but i did erase everything on SDcard!
however i still can acces to download mode and recovery.
No rom can be installed as i can t mount sdcard and all have been erased on it.
I have tried to install drivers but not all of them seem to install. I have tried with flashtool with the rom downloaded but i have error...
Can u help saving my G2 please.
Thx
Click to expand...
Click to collapse
I have a similar problem and with this method the G2 came to life > http://forum.xda-developers.com/showthread.php?t=2471370
What error do u have?
---------- Post added at 11:04 AM ---------- Previous post was at 10:45 AM ----------
Try this: http://www.androidiani.com/forum/mo...ristino-lg-g2-con-lg-mobile-support-tool.html
download lg mobile launcher
1- go in downloadmode
2- open LG launcher
3- connect the USB on PC
4- click option and update recovery
5- it automatically find the last version for ur device ,it download it and install
Enjoy
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?
LG FlashTool...
Syaa said:
Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?
Click to expand...
Click to collapse
LG G2 Stock Firmware (Go Back to Stock)
Just search that on here and download necessary files, flash, then use Stump for root and AutoRec for recovery.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
...After you download your files, DELETE all existing driver files and reboot...THEN re-install your drivers.
To enter download mode for flash, simply hold the volume button up and plug in the usb.
GIVE IT MAYBE 10 min. to install if it doesn't immediately see your phone.
Solved
I tried this but i hadn't time to download a new rom. And had not the drivers too, but i finally fix the problem
I installed the drivers with the ADB driver and used the adb to push my zip file to the storage memory. I cant remember where i found the tutorial cause i did it in the morning. But i can search it again if needed
Thx for the help
next time, buy yourself a mini usb/otg stick (i.e. sandisk dual usb/otg stick)...
if you can enter twrp - just flash the rom from that otg memory stick... no computer or drivers needed...
ok, you need a computer to transfer the rom zip to the memory stick
cheers
I recently upgraded to ? and was disappointed to say the least so after looking around there are number of ways but all seem complicated so here is the easiest way which works for me
Flash at your own risk
My version P1640
1. Flash twrp recovery with flashtool or adb
2. Do a nandroid backup
3. Flash this http://rootjunkysdl.com/?device=Tegra Note 7&folder=Rom Stock 4.4.2-2.5
4.wipe dalvic etc then reboot
This rom is not compiled by me but is rooted
Lollipop is good but you need to tweak it to get it back to earth.
* Make sure your tablet is OEM unlocked. Then flash a sophisticated recover image version like TWRP. This will allow root-mode enabling via a patch.
* Put the tablet into fastboot mode and flash RootJunky's shared Lollipop restore image instead of the upgrade over the air (OTA). Good idea to erase particular partition before flashing.
* Boot to the recovery stage. Install latest zip SuperSu.zip using sideloader or having it already on a SD. This will enable root mode.
* Start system. Remove Apps from system partition unneeded, or that can be moved or installed to user directory instead. This frees up vital space. Example Lollipop only leaves a few megabytes left in the system partition after installation. Consider using Link2SD. Example get Google+, Google Play, Google Magazine, etc into the user partition and any other big App off your system parition. The system partition should only have important apps needed to be retained if a factory wipe is enacted.
* Then go through all your system settings make sure you tweak them to suit both power saving and your own desires.
* Use a startup tool like ES Task Manager to remove apps starting that don't need to be running from system boot.
* Install all Google Apps wanted. This can help to configure the system how it's meant to be.
* The system should now run smooth and use little battery.
---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------
With a bit of manipulation I replace the Launcher to Google's Now one.
e8hffff said:
Lollipop is good but you need to tweak it to get it back to earth.
* Make sure your tablet is OEM unlocked. Then flash a sophisticated recover image version like TWRP. This will allow root-mode enabling via a patch.
* Put the tablet into fastboot mode and flash RootJunky's shared Lollipop restore image instead of the upgrade over the air (OTA). Good idea to erase particular partition before flashing.
* Boot to the recovery stage. Install latest zip SuperSu.zip using sideloader or having it already on a SD. This will enable root mode.
* Start system. Remove Apps from system partition unneeded, or that can be moved or installed to user directory instead. This frees up vital space. Example Lollipop only leaves a few megabytes left in the system partition after installation. Consider using Link2SD. Example get Google+, Google Play, Google Magazine, etc into the user partition and any other big App off your system parition. The system partition should only have important apps needed to be retained if a factory wipe is enacted.
* Then go through all your system settings make sure you tweak them to suit both power saving and your own desires.
* Use a startup tool like ES Task Manager to remove apps starting that don't need to be running from system boot.
* Install all Google Apps wanted. This can help to configure the system how it's meant to be.
* The system should now run smooth and use little battery.
---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------
With a bit of manipulation I replace the Launcher to Google's Now one.
Click to expand...
Click to collapse
heads up just finished the lollipop stock rom here
1eyedmonster said:
I recently upgraded to and was disappointed to say the least so after looking around there are number of ways but all seem complicated so here is the easiest way which works for me
Flash at your own risk
My version P1640
1. Flash twrp recovery with flashtool or adb
2. Do a nandroid backup
3. Flash this http://rootjunkysdl.com/?device=Tegra Note 7&folder=Rom Stock 4.4.2-2.5
4.wipe dalvic etc then reboot
This rom is not compiled by me but is rooted
Click to expand...
Click to collapse
Thanks a lot!
LP 5.1 was a waste of time and resources. Apps freeze randomly (even after factory reset etc) and there are just better UI options in KK for now.
1eyedmonster said:
I recently upgraded to and was disappointed to say the least so after looking around there are number of ways but all seem complicated so here is the easiest way which works for me
Flash at your own risk
My version P1640
1. Flash twrp recovery with flashtool or adb
2. Do a nandroid backup
3. Flash this http://rootjunkysdl.com/?device=Tegra Note 7&folder=Rom Stock 4.4.2-2.5
4.wipe dalvic etc then reboot
This rom is not compiled by me but is rooted
Click to expand...
Click to collapse
Oh man! I flashed this on top of 5.1 LP as your instructions but now its in boot animation from ~11 minutes now! Any other formats had you done after flashing this over LP like factory reset from TWRP?
Fk me! I cant even get into recovery by poweroff+volume up!! It just switches off then boots back on and goes into the bootlogo powered by tegra. How do i atleast switch it off until something is figured out? Its just getting hotter and stuck on bootloop
How do I flash it back to 4.4?
nakulp said:
Oh man! I flashed this on top of 5.1 LP as your instructions but now its in boot animation from ~11 minutes now! Any other formats had you done after flashing this over LP like factory reset from TWRP?
Fk me! I cant even get into recovery by poweroff+volume up!! It just switches off then boots back on and goes into the bootlogo powered by tegra. How do i atleast switch it off until something is figured out? Its just getting hotter and stuck on bootloop
How do I flash it back to 4.4?
Click to expand...
Click to collapse
Last night I went into TWRP to fix permission since seemed like something was wrong with Lollipop and my TN7 went into a bootloop also. Couldn't get into recovery so I let the battery drain, recharged, and was finally able to get into TWRP. Flashed Tomsgt's 5.1.3 but before rebooting from TWRP it stated "No OS Installed! Are you sure you wish to reboot?" Of course I rebooted anyway and now the tablet is on but it's a blank screen. I hold the power button and the message "Power Off Device" does show up, so that's odd. Ended up flashing Stock-4.4.2-2.5 and it's finally back!!
Loved this tablet initially when it didn't stutter/lag so much, and I know the hardware is supposed to be more capable (other than the 1GB of ram). I don't game on it and don't do anything intensive. Don't understand why it would lag so much...
is this super-tool works with only evga tegra note???????
I have xolo play tegra note 7. I want to know that is this supertool will work with my xolo play tegra note 7 model p1640.. because this tool is for evga tegra note 7 so if anyone tried it then please help me...............
And i also want to know that my model is on lollipop and i want to downgrade this to kitkat... then can i use this tool( IF COMPATIBLE ) ?????????
All brands are the same
rahulsingla said:
I have xolo play tegra note 7. I want to know that is this supertool will work with my xolo play tegra note 7 model p1640.. because this tool is for evga tegra note 7 so if anyone tried it then please help me...............
And i also want to know that my model is on lollipop and i want to downgrade this to kitkat... then can i use this tool( IF COMPATIBLE ) ?????????
Click to expand...
Click to collapse
There are no differences between the brands, The only difference is the boot image and the name of the brand behind the device. the supertool will work with any brand (i think so) and if you use supertool to downgrade there should'nt be any issues (i think so i am not sure:angel
.
.
.
a message to all users reading the post there is a group on facebook named Nvidia Tegra Note so if you have any issues you can join that group everyone will try to answer that {Leave a Thanks if this Helped}
cant use this method
I'm having a little problem in here so can you please tell me which other methods can be use?
Thank you
Worked perfect
Please help how to remove Lollipop and install Kitkat in Xolo Tegra Note 7, just bought week back and really not happy with it so far.
Thanks for rply
First of all thanks for rply and i wanna tell you bro that after comment on xda i try to take risk and flash and downgrade with supertool and you know what supertool has xolo brand images cracked so nothing changed in my note after flash with supertool......
try to download and it says "You Shall Not Pass" and forces me back to the home page.
Can i flash this on my nvidia tegra note (xolo)
i want to downgrade my device
i want to downgrade my xolo p1640 ( tegra note tablet ) to android 4.4 , please someone help me. I am getting confused with several posts. please someone help me with steps so that i can downgrade my device. currently i have android 5.1 on it and not rooted .
Hello everyone, first of all am a newbie and I am trying to flash my Note3 with custom rom, I installed twrp using Odin, first I faced an error that Everytime Odin will say pass but phone will boot normal, how ever I find the solution by unchecking auto reboot in Odin, after pass I'll unplug the device, pull off battery then restart and it will get me to term recovery and it works fine afterwards. I tried installing few custom ROMs like magma nx, dark lord x etc but after everything done phone get stuck in bootloop. First I did the same and got stuck then I did a stock rom flash and got the phone working again, how ever I tried flashing again with magma nx and it got away from Samsung logo to pyeongchang edition logo and got stuck there, all the roms I tried give me same error. Am using twrp 2.8.7.0. I had also rooted using SuperSU, how can I get past this? Any help will be appreciated.. thank you
What phone model ??
Bootloop read the thousands of bootloop posts use roms SEARCH THREAD box bootloop .
Difficult to know what you are doing wrong without more information .
Model is a Note 3 N9005,
I have gone through most of the threads but I am not finding a solution yet, as I said :-
1) Installed TWRP using Odin
2) Rooted the device
3)Placed few Custom ROMs in SD
4)Flashed using TWRP (followed instructions)
5) Flashing finished successfully
6) Reboot
7) Bootloop
Stuck here, can I provide any other details?
3)Placed few Custom ROMs in SD
As in what rom one only not multiples .
4)Flashed using TWRP (followed instructions)
Right twrp wrong twrp ??
7) Bootloop
What did rom thread say about bootloop ??
Updated bootloader >>when required .
Magma has full instructions and full faqs .
---------- Post added at 02:02 PM ---------- Previous post was at 01:43 PM ----------
mAGMA
SEARCH THREAD Bootloop
https://forum.xda-developers.com/search/thread/3508672?query=bootloop
FAQ
Q: I have bootloop right after I flash the ROM
2. In first boot, when asked to "Consent for Diagnostic Report", you forgot to uncheck it. As written in OP, you have to "uncheck" the Consent for Diagnostic Report.
To solve it:
1. Power off phone
2. Remove sim card
3. Boot to ROM.
4. Go to settings/general management
5. Disable "Report Diagnostic Info"
6. Power off Device.
7. Insert sim card.
8. Boot up phone and continue using it
Managed to make them work already, thanks for the help bro.. appreciate it
I managed to work around the issue of bootloop bro, it had something to do with the kernal , I already flashed to magma and it is working now, how ever I was curious that each time when I restart the phone, it took a bit time to load up, like note 3 logo first, then magma note 8 logo, then after that it says optimizing apps and actually it shows around 240 apps or so, is it normal or is there any workarounds for the same? (How ever, boots up fine but boot up time is around 7-12 min approx)