Database Users

Lg g2 bricked, i think

Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?

LG FlashTool...
Syaa said:
Morning, guys. Yesterday i was trying to flash a stock rom with TWRP. But unfortunately because of a mistake my phone get bricked.
I downloaded the rom, but i forgot to put it on my phone before the wipes, and i did a wipe data
I can enter in TWRP, but my pc dont recognized the drivers, so i cant follow any tutorial. Tried to install the lg drivers, but dont worked.
Someone can help me? Exists some way to recovery it?
Click to expand...
Click to collapse
LG G2 Stock Firmware (Go Back to Stock)
Just search that on here and download necessary files, flash, then use Stump for root and AutoRec for recovery.
---------- Post added at 09:50 AM ---------- Previous post was at 09:45 AM ----------
...After you download your files, DELETE all existing driver files and reboot...THEN re-install your drivers.
To enter download mode for flash, simply hold the volume button up and plug in the usb.
GIVE IT MAYBE 10 min. to install if it doesn't immediately see your phone.

Solved
I tried this but i hadn't time to download a new rom. And had not the drivers too, but i finally fix the problem
I installed the drivers with the ADB driver and used the adb to push my zip file to the storage memory. I cant remember where i found the tutorial cause i did it in the morning. But i can search it again if needed
Thx for the help

next time, buy yourself a mini usb/otg stick (i.e. sandisk dual usb/otg stick)...
if you can enter twrp - just flash the rom from that otg memory stick... no computer or drivers needed...
ok, you need a computer to transfer the rom zip to the memory stick
cheers

LG L5 philzmod error

hi guys
I installed (Kinguser) and root my phone via it , then I installed philz mod (philz v.6.0.img) using flash tools (rasher) to install new ROM .However, it doesn't work ,So I restored my old ROM and all files and my Device return as it was and No problems yet , then
when I was playing in the recovery (try all tasks) , I have press ( philz settings\rerootsystem(supersu)\yes), then tried to boot operating system (android), but the Device didn't boot it , when I run my Device it Automatically boot to recovery (philz) , I tried more than once , It always boot the recovery or didn't boot any thing (still show LG logo)
notes:
I have another same Device
my recovery version: cwm:v.6.0.4.8 \philz:v.6.27.5
I tried to restore Backup (from my another same Device),but didn't work​

hm,please say me what rom you installed (android version,romname,kernel),is your bootloader unlocked,etc!!!!

..
-CALIBAN666- said:
hm,please say me what rom you installed (android version,romname,kernel),is your bootloader unlocked,etc!!!!
Click to expand...
Click to collapse
ROM version: lollepop
kernel: (I don't think what was name, but it was for LG devise)
I don't know if my devise was unlocked bootloader, but before I install recovry I was unlooked bootloader and when I make backup file, the devise was unlooked bootloader(note:I make the backup from my another devise)
I don't think the problem in the ROM or the backup becuse the problem start when I press (reroot,,,,,)
I'm reedy for all athoer QQ
and that is my email:
[email protected]
And sry for printed mistakes

simply use the latest twrp2.8.6.0 recovery from aidasaidas75 than it should be fixed i think.
link to aidas thread below me,greeeeeeetz!!!!!
http://forum.xda-developers.com/opt...recovery-twrp-2-8-0-1-touch-recovery-t2877143

.
-CALIBAN666- said:
simply use the latest twrp2.8.6.0 recovery from aidasaidas75 than it should be fixed i think.
link to aidas thread below me,greeeeeeetz!!!!!
http://forum.xda-developers.com/opt...recovery-twrp-2-8-0-1-touch-recovery-t2877143
Click to expand...
Click to collapse
Ok, I download the file (trwp2.8.6.0.zip) and tried to install it via philz recovry (install zip/choose zip from strong sdcard /twrp.2.8.6.0-e612-aidasaidas75.zip/yes)
Then I get masseg (installation aborted)
Now, how I install twrp recovry??
Note:I tried download (twrp flshable.zip) and install it .and install complete then restart the recovry but nothing changed
wiating you

..
...

.
Guys
I need hellp :crying:​

AhMaD eLMoMaNi said:
Ok, I download the file (trwp2.8.6.0.zip) and tried to install it via philz recovry (install zip/choose zip from strong sdcard /twrp.2.8.6.0-e612-aidasaidas75.zip/yes)
Then I get masseg (installation aborted)
Now, how I install twrp recovry??
Note:I tried download (twrp flshable.zip) and install it .and install complete then restart the recovry but nothing changed
wiating you
Click to expand...
Click to collapse
I still wait for the solution, Please help me

try flash with latest cwm or with terminal emulator,in normal case it must work.

,
-CALIBAN666- said:
try flash with latest cwm or with terminal emulator,in normal case it must work.
Click to expand...
Click to collapse
that's hard for me , pleas tell me how i flash it useing terminal emulator when i cant open OS ?!!
is root Reason the problem ? because the problem start when I reroot the device using the recovery
when I reroot the device , when I restart it using recovery tell me [root access is missi] is the root necessary to operate OS ?
I tried press yes-apply root (/system/xbin,,,,,,ETC) and nothing changed
can you give me skype or facebook or any thing can we chat with it

LG G2 D802 is not responding after AutoRec installation... plz Help

(sorry for RIP English)
i have LG G2 D802, today i installed AutoRec - KitKat Recovery Installer, everything was fine but when installation is finished and i reboot into recovery, the phone is showing weird white lines (please see attached pics) and not booting.
please see pics by copying link address within "" qoutes. (coz i, am new user and now i am cant post outside links)
"imgur.com/a/fDQBT"
plz Help....
every help will be appreciated...

Is it going fastboot mode? If yes, install stock KDZ with LG Flashtool.

Is ur for going to download mode??
If yes then
Open the back of ur mobile and see whats ur mobile model.
Then flash it with stock rom...

Try enter to recovery mod manually or download mode if you enter to recovery (with volume down+power key) try hard reset

Aamirshah said:
(sorry for RIP English)
i have LG G2 D802, today i installed AutoRec - KitKat Recovery Installer, everything was fine but when installation is finished and i reboot into recovery, the phone is showing weird white lines (please see attached pics) and not booting.
please see pics by copying link address within "" qoutes. (coz i, am new user and now i am cant post outside links)
"imgur.com/a/fDQBT"
plz Help....
every help will be appreciated...
Click to expand...
Click to collapse
This forum addresses the issue
http://forum.xda-developers.com/showpost.php?p=52414185&postcount=122

Same problem here, no solution ??
---------- Post added at 06:33 PM ---------- Previous post was at 06:23 PM ----------
quicksilvree said:
This forum addresses the issue
http://forum.xda-developers.com/showpost.php?p=52414185&postcount=122
Click to expand...
Click to collapse
its not clear how to do that, i mean i dont understand what should i do

quicksilvree said:
This forum addresses the issue
http://forum.xda-developers.com/showpost.php?p=52414185&postcount=122
Click to expand...
Click to collapse
its not clear how to do that, i mean i dont understand what should i do

i think you flashed wrong version of Autorec . If you are able to enter download mode then flash stock kitkat. And if you are able to enter TWRP flash any custom rom.

Guys we cannot enter neither download mode or recovery, that's the problem !!

Canvas A120 stuck at android logo

Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.

speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Never ever install chain fire 3d ...ï installed same problem UK what I did?...flashed only recovery and restored a backup...
---------- Post added at 02:18 PM ---------- Previous post was at 02:17 PM ----------
speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Use only gl tools. ...http://forum.xda-developers.com/android/apps-games/app-gltools-1-29-t2828630
---------- Post added at 02:23 PM ---------- Previous post was at 02:18 PM ----------
speedracer426 said:
Hi all,
this is my first post on xda and first serious problem for me.
I just installed 3DChainfire to my Canvas 2 colors (jelly bean version which i upgraded to kitkat though company upgrade, 4 GB version) and when it rebooted the device it could never go beyond Android logo screen. I was able to go to stock recovery mode, as i did not installed cwd recovery, and i wiped data and factory reset the phone. It did not help, so i wiped cache partition which did not help too. I am unable to use SPTools as my PC does not install drivers for my phone so unable to connect my phone to PC. However i tried to install drivers manually for the device but it did not help.
I have SD card option though and i will try tonight to flash stock JB ROM, if possible. Will it be possible to flash jelly bean ROM through stock recovery mode? I am also confused that whether i should install JB or KK stock ROM as i had upgraded using KK last time. I am stuck friends. Please reply soon or i will have no other option than to go to service centre.
Click to expand...
Click to collapse
Listen download jellybean or kitkat ...u can't flash a rom through stock recovery I used ctr for kitkat....u can only flash through SP tools...never give ur phone to a service center for software problems...They say motherboard issue always and charge ..its a way of making money...ull find drivers for ur phone sorry I can't help u there but mmx a110/ vcom driver guess should work I'm not sure ...ï don't remember the driver ï used ....just flash after formatting and chill out..everything will be fine if u lose ur imei...use wifi download mobile uncle tools and replace ...
---------- Post added at 02:25 PM ---------- Previous post was at 02:23 PM ----------
Please note ..Flashed only recovery means custom ctr recovery not stock ..u can't restore a backup from stock. ..

Thanks all..but i have already flashed..
Thanks all,
I could not wait for replies so had to rush for more information on the topic. After few hiccups i downloaded and installed drivers for my mobile from this site. Then i used SP tool to flash JB on my device. It all about the order of steps: select scatter file in SP tools, press download, remove battery from bricked mobile, insert battery after 15 secs. , plug through usb cable to pc, files will be flashed automatically, press ok wherever required, a green tick appears which means its done. Then i started my phone and it worked.
Then i had the courage to upgrade to KK FOTA. I saved it on my SD card. And i flashed cwd recovery though mobile uncle tool and flashed rom from custom recovery. But sorry to say but my phone was soft bricked again to logo screen :crying::crying: when i rebooted. I went into cwd recovery and again flashed JB.
Then i downloaded CleanKat to SD Card. Again flashed KKFOTA but after first boot i rebooted this time into recovery and flashed CleanKat..and it has been working.
CleanKat is a great ROM.
Thanks to XDA once again.
All the softwares needed had been downloaded from xda site only.

Searching for graphically efficient ROM..any ideas
Presently i have been searching on fastest ROM on this device. And that too for gaming. Do you guys have any idea about ROM which is best for gaming on this device
Should i start a new thread for this discussion?

Indian Version C9 Pro-SM-C900F root

SM_C900F rooted successfully

Yes, Even I m waiting for stock root or custom.
Waiting for a Dev to work on this phone.
I m ready to test..
Plz Devs. Someone work on this..

TWRP FOR C9 PRO (SM-C900F)
Could someone check this link. I m not sure if it is the correct.
http://www.needrom.com/download/twrp-for-c9-pro-sm-c900f/?utm_source=dlvr.it&utm_medium=twitter
================
Also this link,
https://www.androidfilehost.com/?w=files&flid=38726

Pariki said:
TWRP FOR C9 PRO (SM-C900F)
Could someone check this link. I m not sure if it is the correct.
http://www.needrom.com/download/twrp-for-c9-pro-sm-c900f/?utm_source=dlvr.it&utm_medium=twitter
================
Also this link,
https://www.androidfilehost.com/?w=files&flid=38726
Click to expand...
Click to collapse
what you are trying to say? didn't get you

Pariki said:
TWRP FOR C9 PRO (SM-C900F)
Could someone check this link. I m not sure if it is the correct.
http://www.needrom.com/download/twrp-for-c9-pro-sm-c900f/?utm_source=dlvr.it&utm_medium=twitter
================
Also this link,
https://www.androidfilehost.com/?w=files&flid=38726
Click to expand...
Click to collapse
Plz test recovery
Anyone

Updates...
http://www.needrom.com/download/twrp-for-c9-pro-sm-c900f/#
Here's what I did so far..
Successfully installed TWRP & booted into the recovery.
But I m not able to find the zip file for Supersu even though I copied it to the SD Card. Not even the Internal storage are visible.
I tried other ways to root the phone.
I m not a Developer to proceed further.
Plz some dev work on this..

supersu
Try this

I m at work . Try ur twrp at night n reply
---------- Post added at 07:41 AM ---------- Previous post was at 07:39 AM ----------
Is twrp works on latest aqc3.

Success... Indian C9 Pro is now Rooted....
I had trouble with my SD Card. So I brought a new one & copied the SuperSu zip file.
Booted to TWRP & flashed it.
That worked...

Any safty tips for instaling twrp like oem unlock or wipe internal card by samsung when unlock oem ?????

Pariki said:
I had trouble with my SD Card. So I brought a new one & copied the SuperSu zip file.
Booted to TWRP & flashed it.
That worked...
Click to expand...
Click to collapse
Awesome guys. thanks Pariki for finding twrp image and for testing it. After flashing TWRP, i am not able to login into TWRP. I tried to hold volume up + volume down + power + home keys and after booting released Vol down key but I am still not able to boot into TWRP. Please help how can i boot into TWRP.
Regards,
Mragank

mragankberi said:
Awesome guys. thanks Pariki for finding twrp image and for testing it. After flashing TWRP, i am not able to login into TWRP. I tried to hold volume up + volume down + power + home keys and after booting released Vol down key but I am still not able to boot into TWRP. Please help how can i boot into TWRP.
Regards,
Mragank
Click to expand...
Click to collapse
=========================
OEM Unlock needs to be done + Crom Service App must be installed & It should be enabled.
Download files from
http://www.needrom.com/download/twrp-for-c9-pro-sm-c900f/?utm_source=dlvr.it&utm_medium=twitter
Flash SM-C900F_twrp-3.1.0-0.tar file using ODIN. I used Odin3-v3.11.1
This worked for me and I was able to boot to TWRP and flashed SuperSu.
Vol Up + Home + Power = TWRP Recovery
Vol Down + Home + Power = Download mode
Try at your own risk & Make sure you have a backup of the complete firmware ( 2.2 GB file ).
Errors when flashing the SuperSu were
Unable to mount \data and also \System
Not sure how to mount data and system.
TWRP is not allowing to mount. Some Dev has to work on this..

Try this for mount system .

It's in a9 pro forum .

No luck with the above file.
Cannot mount system & data.
Instead the phone went into bootloop & I had to flash the original firmware.
There are many issues with this Version of TWRP.
I will wait until a Developer works on the phone.

Have u try this
1. Flash twrp via Odin.
2. Boot in to twrp
3. In twrp format data
4. Flash super su zip
5. Flash ashyx provided zip Dr mount data
6. Reboot to system
---------- Post added at 04:47 PM ---------- Previous post was at 04:45 PM ----------
Hope this will work 100 %

Yes. Tried that but cannot format data & cannot find internal partition nor files. Cannot unmount system or Cache.
Twrp will freeze when tried to reboot into recovery or system.
Many issues with this Version of TWRP.

Bad luck. . ..so waiting is still on

I have successfully rooted my device...despite many problems .. will update you soon.
Successfully rooted my Indian Version... Despite many unsuccessfull attempts...
Thanks to "Mutahhar Bashir" for sharing it on his site.
The links are
http://ministryofsolutions.com/2017/03/samsung-c9-pro-sm-c900f-twrp-root-marshmallow.html
please go through the comments section too....
for reference purpose see the video...
https://www.youtube.com/watch?v=-AprKdR7-1w
for CROM apk to install
http://www.apkmirror.com/apk/samsun...ease/crom-service-1-0-4-android-apk-download/
any one prepare step by step guide will be appreciated

Anyone provide c900f indian stock firmware link with resume support (gdrive ,mediafire,mega)