Database Users

GT-i9506: Installing 4.4 on i9506

Hi, im trying to install the 4.4 korean update onto my australian phone, i downloaded an stock image for the E330s hoping it would work, but upon flashing i get the error in odin 1.85 & 3.07
Code:
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: 0x1b
WRITE PROTECTION: ENABLE
SECURE CHECK FAIL : sbl1
Auto-reboot & F. reset time
Code:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
then i did with repartition checked:
Code:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E330SKSUCNA7_E330SSKTCNA7_E330SKSUCNA5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/008> Added!!
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/013> File analysis..
<ID:1/008> File analysis..
<ID:0/013> SetupConnection..
<ID:1/008> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> sbl1.mbn
<ID:1/008> NAND Write Start!!
<ID:1/008> FAIL! (Auth)
<ID:0/013> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 2)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:1/008> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
my model number is:
I9506XXUAMHD
any help would be nice

GT- i9506 still without have android 4.4.2 ready. E330s isn't the same device and don't use same firmware. Each model have own firmware. The unique you gonna have is a paperweight trying this experiments :silly:

well im just waiting for the download link to cm11
http://forum.xda-developers.com/showthread.php?t=2662462
phone is still working and if not i have 4.3 to rely on.
also is qualcomm secureboot = knox?

Unable to Root Note 4(N-910G)

hello
i am unable to root my note 4 tried twrp and cf both(odin and everything)
odin gives me this error
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trlte-trltedt-smn910g.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1005)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> cache.img.ext4
<ID:0/013> FAIL! (Auth)
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
i used to get the same error before i upgraded to 5.0.1
basically i have never been able to root this phone
please help
:crying:

FIXED THAT MYSELF
Disable reactivation lock
Goto
Settings>Security>Reactivation Lock
Enter your Sasmung ID Password
Reboot in Bootloader Mode and give it a go!!
ROOTED

Download lollipop 5.1.1 fail

Hey guys i have error sw rev check fail device 2 binary 1 that i can't download firmware
my phone from Poland and it's not support arabic so i downloaded the EGY one and when try to flash it using Odin it say sw rev check fail device 2 binary 1 on my phone and Odin log is
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that's my rom that i try to download
N910CXXU1COI4_N910COJV1COI1_EGY\N910CXXU1COI4_N910COJV1COI1_N910CXXU1COI4_HOME.tar.md5
and that's on my phone now
Baseband version :N910CXXU1COJ5
why i get that?

cheetoslover said:
Hey guys i have error sw rev check fail device 2 binary 1 that i can't download firmware
my phone from Poland and it's not support arabic so i downloaded the EGY one and when try to flash it using Odin it say sw rev check fail device 2 binary 1 on my phone and Odin log is
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that's my rom that i try to download
N910CXXU1COI4_N910COJV1COI1_EGY\N910CXXU1COI4_N910COJV1COI1_N910CXXU1COI4_HOME.tar.md5
and that's on my phone now
Baseband version :N910CXXU1COJ5
why i get that?
Click to expand...
Click to collapse
Very easy my friend you looks Arabian you tried Egypt rom to get csc and Arabic language but your last firmware is COJ5 and it bootloader locked by Samsung
Try to flash COJ5 FIRMWARE from other Arabic country to solve it
Try this firmware http://www.sammobile.com/firmwares/download/60713/N910CXXU2COJ5_N910COJV2COJ2_XFU/
Good luck

desperate for some help with a sm-900f

Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1

fatfei said:
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Just an update, i have loaded twrp on there but too scared to touch anything else pending help

Hi try this guide find a g900f pit file or if you have made a backup of your own and flash it via odin then try again to flash stock
Url : forum.xda-developers.com/showthread.php?t=2659635

Unfortunately I now get this error on Odin
D:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

force alarm, i was just being impatient. all working. Thank you very much for the help

No problem mate ?

[NEED HELP] Soft bricked Galaxy A5 2017

Need help i get soft bricked my samsung a5 2017 (LDU)
i brought LDU & installed A520FXXU2BQIH_A520FOJV2BQJ1_PAK from sammobile after installation phone sticked into GOOGLE FRP after 2-3 hours searching on youtube i found a method for google frp reset by COMBINATION file so i installed this file COMBINATION_FAC_FA60_A520FXXU3ARA3 in that 7.0 firmware A520FXXU2BQIH_A520FOJV2BQJ1_PAK now device get bricked also then i try more options too then i download
A520FXXU4BRA8_A520FOXA3BQL2_XEF & COMBINATION_FAC_FA60_A520FXXU4ARA4 still fail at wright system in odin also get back to 1st installed 7.0 firmware now get red error on device screen SW REV. CHECK FAIL. DEVICE: 4 BINARY:3
kindly help

Is your problem fixed or not.... If not the problem is with you binary.. You have to have one.. Your best and easiest way to solve your problem is to start all over again and flash your stock rom back and then root your phone.
Don't forget to backup your phone

thank you a lots for reply bro i did same what you said about me but all fail again take a look im not geek to understand kindly give me step by step solution.
with combination file in AP
COMBINATION_FAC_FA60_A520FXXU3ARA3_FAC3ARA3_CL12800524_QB16363926_REV00_user_mid_noship
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 1509 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
AND WITH FULL FIRMWARE
AP_A520FXXU3BQLA_CL12637612_QB16162045_REV00_user_low_ship_meta
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4624 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ALL FAIL DEVICE TILL THE SAME KINDLY HELP

Single file
download and load single file firmwares of the country

ozkanasilioglu said:
download and load single file firmwares of the country
Click to expand...
Click to collapse
single file not available on sammobile.com
now what to do sir

How do u find the firmware and can I use any version as long as its the country firmware