I have installed and reinstalled the Android SDK multiple times with no luck. ADB recognizes the phone just fine but when I boot into fastboot, and plug the phone in, nothing happens. I run the command fastboot devices and nothing. And on my phone it still says to please connect to USB cable. However, it already is connected. Any ideas? I followed the guide over in the general section and I'm stuck on testing the fastboot connection. I have followed everything that it stated to do and download. Please help.
Nav to the directory where you have adb. Is there a fastboot file in there?
Hey go http://forum.xda-developers.com/showthread.php?t=2588979 after installed go to c/adb and tap shift and right click on mouse see open command window here
tu3218 said:
I have installed and reinstalled the Android SDK multiple times with no luck. ADB recognizes the phone just fine but when I boot into fastboot, and plug the phone in, nothing happens. I run the command fastboot devices and nothing. And on my phone it still says to please connect to USB cable. However, it already is connected. Any ideas? I followed the guide over in the general section and I'm stuck on testing the fastboot connection. I have followed everything that it stated to do and download. Please help.
Click to expand...
Click to collapse
Try this with phone booted and connected with USB (Make sure USB Debugging is enabled in developer options.) Then
adb reboot boot-loader
You should then be able to do
fastboot devices
There's no dash in bootloader.
andrewnelson23 said:
Nav to the directory where you have adb. Is there a fastboot file in there?
Click to expand...
Click to collapse
Yeah they're both in there.
dratsablive said:
Try this with phone booted and connected with USB (Make sure USB Debugging is enabled in developer options.) Then
adb reboot boot-loader
You should then be able to do
fastboot devices
Click to expand...
Click to collapse
Just did this and I booted into the bootloader. But still says connect USB Data cable. And fastboot devices command does nothing.
tu3218 said:
Yeah they're both in there.
Click to expand...
Click to collapse
Okay. Open a command line from that folder. Shift+right click anywhere within that folder and open command prompt.
Then try:
fastboot devices
While your phone is plugged in and in bootloader. If it doesn't work then its possible that the drivers aren't installed.?
andrewnelson23 said:
Okay. Open a command line from that folder. Shift+right click anywhere within that folder and open command prompt.
Then try:
fastboot devices
While your phone is plugged in and in bootloader. If it doesn't work then its possible that the drivers aren't installed.?
Click to expand...
Click to collapse
Yeah it does nothing. I even tried that command on my nexus 9, and nothing. It very well may be drivers but I've installed them 3 times now. Following the directions exactly.
In SDK manager, the only things I have installed are Android SDK tools 24.4.1, Android SDK platform-tools 23.1, Android support library 23.1.1, and google usb driver 11. And then of course before that I just downloaded SDK tools only, extracted it into my SDK folder on my C drive. That's it. So lost here.
tu3218 said:
Yeah it does nothing. I even tried that command on my nexus 9, and nothing. It very well may be drivers but I've installed them 3 times now. Following the directions exactly.
In SDK manager, the only things I have installed are Android SDK tools 24.4.1, Android SDK platform-tools 23.1, Android support library 23.1.1, and google usb driver 11. And then of course before that I just downloaded SDK tools only, extracted it into my SDK folder on my C drive. That's it. So lost here.
Click to expand...
Click to collapse
Have you selected to allow bootloader unlocking in your developer settings?
andrewnelson23 said:
Have you selected to allow bootloader unlocking in your developer settings?
Click to expand...
Click to collapse
Yeah have that selected.
tu3218 said:
Yeah have that selected.
Click to expand...
Click to collapse
I actually had a similar problem because windows didn't automatically install the drivers. If you go to your device manager is there any yellow warning symbols where a driver wasn't installed?
andrewnelson23 said:
I actually had a similar problem because windows didn't automatically install the drivers. If you go to your device manager is there any yellow warning symbols where a driver wasn't installed?
Click to expand...
Click to collapse
Nope, under portable devices I can see nexus 6p, and yellow exclamation points.
When I'm in the bootloader and go to device manager, there is a yellow exclamation point where it says android. But once the phone is on, it shows Nexus 6P like I said before.
tu3218 said:
Nope, under portable devices I can see nexus 6p, and yellow exclamation points.
Click to expand...
Click to collapse
That's device driver problems. You should screenshot and upload a picture of that. Do you have teamviewer? I could help you via that if you want or I can help you just over xda, though that'll be more of a process.
andrewnelson23 said:
That's device driver problems. You should screenshot and upload a picture of that. Do you have teamviewer? I could help you via that if you want or I can help you just over xda, though that'll be more of a process.
Click to expand...
Click to collapse
gahhh I don't know why I said that. I DON'T see any yellow exclamation points! Sorry.
Here it is in device manager. Oem unlock ticked, as well as usb debugging.
tu3218 said:
gahhh I don't know why I said that. I DON'T see any yellow exclamation points! Sorry.
Click to expand...
Click to collapse
Ah gotcha. You should expand all of the devices just to check there isn't another yellow exclamation point somewhere else. Your phone needs to be in bootloader and plugged in to your computer while you do this. I think when I had the yellow exclamation point it happened with the Google driver. In another device(don't remember which one).
---------- Post added at 11:03 PM ---------- Previous post was at 10:56 PM ----------
tu3218 said:
Here it is in device manager. Oem unlock ticked, as well as usb debugging.
Click to expand...
Click to collapse
Is this while you're in bootloader?
andrewnelson23 said:
Ah gotcha. You should expand all of the devices just to check there isn't another yellow exclamation point somewhere else. Your phone needs to be in bootloader and plugged in to your computer while you do this. I think when I had the yellow exclamation point it happened with the Google driver. In another device(don't remember which one).
---------- Post added at 11:03 PM ---------- Previous post was at 10:56 PM ----------
Is this while you're in bootloader?
Click to expand...
Click to collapse
No the picture I attached was with the phone booted up. When in bootloader under device manager, instead of saying nexus 6p it said Android, and it DID have a yellow exclamation point.
tu3218 said:
No the picture I attached was with the phone booted up. When in bootloader under device manager, instead of saying nexus 6p it said Android, and it DID have a yellow exclamation point.
Click to expand...
Click to collapse
That's the problem.
Right click on the driver with the exclamation point>update driver software>browse my computer for driver software>browse> (sdkfolder)/platform-tools(I think) and then see if you can find it and install it.
Okay so that's what I see. I tried the auto update and nothing came up. But I will try what you're saying to do. But when I navigate into SDK Android, what is the file that I am looking for to install? Thanks again for all your help. Much appreciated.
Related
So I am installing the Nexus 7 in my car as the head unit, but am now stuck with this issue.
I unlocked, and rooted the device, and used the fastboot oem off-mode-charge 0 command and it worked.
Anytime the Nexus 7 receives power it turns on.
However the device battery died completely and now when I plug it in to charge, the screen stays black, buttons do nothing, and eventually it boots up, but immediatley powers off as the battery is at 0 % and has the red ! mark.
I can't even use the fastboot command to reverse it since the device can't stay on.
What the heck can I do?
Type the reverse command and it will say "waiting for device". Connect your device and booting into bootloader even for a split second should push the command.
Username invalid said:
Type the reverse command and it will say "waiting for device". Connect your device and booting into bootloader even for a split second should push the command.
Click to expand...
Click to collapse
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
@Username invalid
Yes, but will the command be executed before the device dies again?
---------- Post added at 09:46 AM ---------- Previous post was at 09:44 AM ----------
When you're in bootloader, you don't need debugging enabled since the fastboot protocol comes into play, not ADB (which requires debugging to be enabled). Root is also unnecessary. At least that's what I have learnt in the past 5 months I have had this.
Jeremi1023 said:
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
Click to expand...
Click to collapse
No, you do not need be rooted or have USB debugging enabled to use Fastboot. What Android Bootloader Interface driver version do you have installed on your computer? Did you check by typing "fastboot devices" if your device is being recognized?
sgt. meow said:
@Username invalid
Yes, but will the command be executed before the device dies again?
Click to expand...
Click to collapse
There is not enough time for me to set debugging on before the device dies. It stays on for maybe 5 seconds at the home screen then powers off.
Is there a way I could charge the battery a little bit bypassing the Nexus?
Can I splice in the pos and neg of the usb charger to the pos and neg of the battery?
I'd highly discourage the battery direct charging bit.
Username invalid said:
No, you do not need be rooted or have USB debugging enabled to use Fastboot. What Android Bootloader Interface driver version do you have installed on your computer? Did you check by typing "fastboot devices" if your device is being recognized?
Click to expand...
Click to collapse
I'm not sure at all.
I used the R3 Nexus 7 Superboot to push the original command. I had downloaded fastboot from somewhere else, and put it in the Superboot folder to get it to push the command.
By the way sorry for taking so long to reply in between. Since I am a new user, I have to wait the 5 minutes in between posts.
Jeremi1023 said:
That's what I thought and I tried it, but nothing happened. It stayed in bootloader for about a minute but the command prompt stayed at waiting for device.
I'm not 100% sure but I think I used Nexus Root Toolkit to go back to the stock rom, which would have unrooted the device.
Which also means debugging is not active.
Does it need to be rooted and debug active to be able to push?
I know the bootloader still says unlocked.
Click to expand...
Click to collapse
Since your device was able to stay in bootloader for a minute, did you check if it was being recognized by your computer?
Username invalid said:
Since your device was able to stay in bootloader for a minute, did you check if it was being recognized by your computer?
Click to expand...
Click to collapse
I am assuming it was, as Windows chimed in as soon as the device had enough juice to turn on.
Jeremi1023 said:
I am assuming it was, as Windows chimed in as soon as the device had enough juice to turn on.
Click to expand...
Click to collapse
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Username invalid said:
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Click to expand...
Click to collapse
I will do that and let you know what I see.
Just gotta wait for the thing to turn on. It's very random right now.
Okay, I was able to get into bootloader, and I I did "fastboot devices" and nothing came up.
Also checked device manager and no Android or anything like it in there.
Username invalid said:
Try booting into bootloader again then typing "fastboot devices". Also go to your computer Device Manager > Android Devices > Android Bootloader Interface > Properties.
Click to expand...
Click to collapse
I see that it is coming up as unknown device under the USB section
I have tried the Nexus toolkit guide for installing the drivers to no avail.
When I try to update the drivers for "unknown device" and go to the path where they are, windows said the best drivers are already installed.
Jeremi1023 said:
I see that it is coming up as unknown device under the USB section
I have tried the Nexus toolkit guide for installing the drivers to no avail.
When I try to update the drivers for "unknown device" and go to the path where they are, windows said the best drivers are already installed.
Click to expand...
Click to collapse
http://d-h.st/kDu
Username invalid said:
http://d-h.st/kDu
Click to expand...
Click to collapse
Even with those drivers, Windows still says the best ones are installed and refuses to use them.
Jeremi1023 said:
Even with those drivers, Windows still says the best ones are installed and refuses to use them.
Click to expand...
Click to collapse
Uninstall your current one first.
Username invalid said:
Uninstall your current one first.
Click to expand...
Click to collapse
What I have done is use Nexus Toolkit to uninstall, like it says, anything having to do with nexus, google, samsung, etc. I reboot the computer, wait for the tablet to turn on for a few seconds and then windows chimes in and says the usb device malfunctioned and could not be installed. It shows up in device manager as Unknown Device, and when I try to update the drivers, it says they are updated and won't use the ones I chose.
Have I not fully uninstalled the old ones?
Jeremi1023 said:
What I have done is use Nexus Toolkit to uninstall, like it says, anything having to do with nexus, google, samsung, etc. I reboot the computer, wait for the tablet to turn on for a few seconds and then windows chimes in and says the usb device malfunctioned and could not be installed. It shows up in device manager as Unknown Device, and when I try to update the drivers, it says they are updated and won't use the ones I chose.
Have I not fully uninstalled the old ones?
Click to expand...
Click to collapse
I'm not sure. I stopped using the toolkit and do pretty much everything I need now through ADB. Do you have another computer you can use?
Username invalid said:
I'm not sure. I stopped using the toolkit and do pretty much everything I need now through ADB. Do you have another computer you can use?
Click to expand...
Click to collapse
Yeah I have a desktop I could try it on.
I've never plugged the Nexus in to the desktop, so it should be a complete clean install of drivers.
If Windows recognizes the nexus on the desktop, what should I do?
Do I need to uninstall anything it may install on its own?
I figure I will end up installing the drivers you previously provided.
Hi All,
I bought a Nexus 4 on eBay thinking I could fix it but I am really struggling.
The nexus 4 has TWRP 2.8.6.0 but that is all.
I cannot enable USB debugging as I don't have any rom installed.
I have tried a USB OTG cable with power, but have learned that the phone still cannot output the right power? The light on my usb stick comes on but TWRP does not list any USB OTG.
This phone does not have an SD card slot, so I cannot load anthing this way.
Is it impossible to get this phone working?
Kind Regards,
breaktheblock
Try fastboot from the bootloader, and reflash
ReneX10 said:
Try fastboot from the bootloader, and reflash
Click to expand...
Click to collapse
Hi ReneX10,
Thankyou for the reply, can you tell me the next step after I get to the fastboot screen?
breaktheblock said:
Hi ReneX10,
Thankyou for the reply, can you tell me the next step after I get to the fastboot screen?
Click to expand...
Click to collapse
tbh, going back to stock is a good idea and then the door is open
https://developers.google.com/android/nexus/images?hl=en
there ya go, basically follow the instructions...
ReneX10 said:
tbh, going back to stock is a good idea and then the door is open
there ya go, basically follow the instructions...
Click to expand...
Click to collapse
Will I need adb drivers to be working in windows for me to be able to do this? because so far I have been unable to successfully install any even using NRT to help.
breaktheblock said:
Will I need adb drivers to be working in windows for me to be able to do this? because so far I have been unable to successfully install any even using NRT to help.
Click to expand...
Click to collapse
Afraid I am a Linux baby, can't help you with Windows :/
fastboot etc already on there
my windows computer wont recognize the phone when I plug phone into the PC, driver installation always fails?
how can i connect a phone with just TWPR to my PC, could this be using MTP?
breaktheblock said:
my windows computer wont recognize the phone when I plug phone into the PC, driver installation always fails?
how can i connect a phone with just TWPR to my PC, could this be using MTP?
Click to expand...
Click to collapse
Have a look at this thread ..
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
(Read the thread thoroughly, and take notes, its real easy to get lost in the middle of the procedure and mess it up, and having to start again).
Flashing the stock rom is done entirely via fastboot, so you shouldnt need to worry about adb.
If you can boot into bootloader you should be able to flash stock image, once you get the windows drivers sorted. Luckily I'm on a Mac, so drivers haven't been an issue. I had a similar scenario sometime ago, and after flashing stock, all was good in the world again. I may be wrong, but you'll probably need the latest platform-tools (which contains fastboot) if you're flashing the latest stock images. (Someone correct me if I'm wrong on that one).
Sent from my LG-V500 using Tapatalk
dsbnz said:
Have a look at this thread ..
http://forum.xda-developers.com/nexus-4/general/how-to-how-to-flash-factory-image-t2010312
(Read the thread thoroughly, and take notes, its real easy to get lost in the middle of the procedure and mess it up, and having to start again).
Flashing the stock rom is done entirely via fastboot, so you shouldnt need to worry about adb.
If you can boot into bootloader you should be able to flash stock image, once you get the windows drivers sorted. Luckily I'm on a Mac, so drivers haven't been an issue. I had a similar scenario sometime ago, and after flashing stock, all was good in the world again. I may be wrong, but you'll probably need the latest platform-tools (which contains fastboot) if you're flashing the latest stock images. (Someone correct me if I'm wrong on that one).
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
This is good information, but I cannot get any further that plugging the phone into the PC, I have tried 4 different usb cables and with them all windows 7 and XP says "unknown device".
I wasn't sent the original cable from the owner which I am asking to do if they have it, but it may be a long shot for them to still have it.
Looks like I need the original usb cable?
breaktheblock said:
This is good information, but I cannot get any further that plugging the phone into the PC, I have tried 4 different usb cables and with them all windows 7 and XP says "unknown device".
I wasn't sent the original cable from the owner which I am asking to do if they have it, but it may be a long shot for them to still have it.
Looks like I need the original usb cable?
Click to expand...
Click to collapse
I don't think the cable needs to be original, I've used a Motorola cable on my N4 to flash stock, with no problems.
Is the phone in fastboot mode when you connect to pc?
Have you tried these drivers?
http://developer.android.com/sdk/win-usb.html
Sent from my LG-V500 using Tapatalk
dsbnz said:
I don't think the cable needs to be original, I've used a Motorola cable on my N4 to flash stock, with no problems.
Is the phone in fastboot mode when you connect to pc?
Have you tried these drivers?
http://developer.android.com/sdk/win-usb.html
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
For information I am using a cable from a usb cable that came from a Nexus 5.
When the phone is connected to the PC it had an android lying down with an open chest.
When pointing to the android developer sdk drivers as above it does it's usual thing of saying it is already up to date below that still saying unknown device. I'm so frustrated right now.
breaktheblock said:
For information I am using a cable from a usb cable that came from a Nexus 5.
When the phone is connected to the PC it had an android lying down with an open chest.
When pointing to the android developer sdk drivers as above it does it's usual thing of saying it is already up to date below that still saying unknown device. I'm so frustrated right now.
Click to expand...
Click to collapse
Can you reboot to the main bootloader screen?
The reason i ask is .. When you see the android lying down is there a list below showing the phone stats? If not, possibly this is why windows is reporting an unknown device.
You should try to get back into fastboot
This has the info to get to bootloader if youre not sure how..
http://www.androidcentral.com/how-unlock-nexus-4-bootloader
When you're in fastboot, try to connect to pc again.
Sent from my LG-V500 using Tapatalk
dsbnz said:
Can you reboot to the main bootloader screen?
The reason i ask is .. When you see the android lying down is there a list below showing the phone stats? If not, possibly this is why windows is reporting an unknown device.
You should try to get back into fastboot
This has the info to get to bootloader if youre not sure how..
http://www.androidcentral.com/how-unlock-nexus-4-bootloader
When you're in fastboot, try to connect to pc again.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Underneath the android lying down it has:
FASTBOOT MODE (in red text)
PRODUCT_NAME
HW VERSION
BOOTLOADER VERSION
BASEBAND VERSION
CARRIER INFO
SERIAL NUMBER
SIGNING
SECUREBOOT (in green text - enabled)
LOCK STATE (in red text - unlocked)
Above the android lying down I can use the hardware buttons to toggle between "Start | Restart bootloader | Recovery mode | Power off"
Am I in fastboot?
breaktheblock said:
Underneath the android lying down it has:
FASTBOOT MODE (in red text)
PRODUCT_NAME
HW VERSION
BOOTLOADER VERSION
BASEBAND VERSION
CARRIER INFO
SERIAL NUMBER
SIGNING
SECUREBOOT (in green text - enabled)
LOCK STATE (in red text - unlocked)
Above the android lying down I can use the hardware buttons to toggle between "Start | Restart bootloader | Recovery mode | Power off"
Am I in fastboot?
Click to expand...
Click to collapse
Sounds like youre in the right mode. The problem would likely be on the pc/driver side.
P.S. in fastboot mode, you only need to use fastboot on pc .
Sent from my LG-V500 using Tapatalk
dsbnz said:
Sounds like youre in the right mode. The problem would likely be on the pc/driver side.
P.S. in fastboot mode, you only need to use fastboot on pc .
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
The driver issue is a massive stumbling block.
I'm still not sure if the cable will work.
I understand I can use fastboot after the PC recognises the nexus 4.
I have a Lubuntu PC this may help me but I have no idea where to start in terms of the drivers.
breaktheblock said:
The driver issue is a massive stumbling block.
I'm still not sure if the cable will work.
I understand I can use fastboot after the PC recognises the nexus 4.
I have a Lubuntu PC this may help me but I have no idea where to start in terms of the drivers.
Click to expand...
Click to collapse
I use a mac, so im no use when it comes to linux variants etc.
Depending on the power of your pc, you could try using a virtual machine (i.e. virtualbox running windows xp if you have xp disk, or even windows 7). Ive done this before on the mac (xp virtual machine) and it works. This way you can install the correct drivers on a fresh install of windows, without messing with the host OS.
Otherwise, best bet is to uninstall any drivers in your current windows, and install divers from google link i posted earlier.
Sent from my LG-V500 using Tapatalk
breaktheblock said:
The driver issue is a massive stumbling block.
I'm still not sure if the cable will work.
I understand I can use fastboot after the PC recognises the nexus 4.
I have a Lubuntu PC this may help me but I have no idea where to start in terms of the drivers.
Click to expand...
Click to collapse
just outta curiosity, when you plug the phone in (in bootloader mode) change dir to the one with fastboot.exe in and type (in command prompt):
fastboot devices
what output do you get?
ReneX10 said:
just outta curiosity, when you plug the phone in (in bootloader mode) change dir to the one with fastboot.exe in and type (in command prompt):
fastboot devices
what output do you get?
Click to expand...
Click to collapse
nothing happens at all.
I think I have something similar to this http://forum.xda-developers.com/nexus-4/help/twrp-os-installed-connect-to-pc-t2538794
as in i'm stuffed. :crying:
As in "no devices detected" ...what is the output? Pfffft I tried!
ReneX10 said:
As in "no devices detected" ...what is the output? Pfffft I tried!
Click to expand...
Click to collapse
Just to check I am doing it correctly, I launch cmd in windows, change the directory to the location where fastboot is and type "fastboot devices". The result of this is it just gives the directory name again waiting for another command.
I hope I'm not coming across as ungrateful, I assure you this is not the case.
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
I believe part of the instructions are to install the Platform Tools, which should include drivers. Try running the SDK Manager and updating or installing the drivers again. Also ensure you have USB Debugging ON in your Developer settings and OEM Unlocking enabled. Lastly, tap the notification in your shade about the USB connection (I think it defaults to Charging Only) and change it to various modes. Mine seems to only work on PTP mode. When you run the adb devices command you will need to authorize the connection on the phone end the first time by clicking OK so make sure the screen is on and unlocked so you can see it.
Hope this helps.
peckaldee said:
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
Click to expand...
Click to collapse
u enable OEM Unlock under developer settings?
You enable USB debugging?
Me personally do not get any strings of data returned when im on fastboot
i open CMD, run ADB DEVICES, get message saying the port is opening, and then listing devices... which is empty
but i am able to flash anything i want using fastboot....
try this command and see if it works after that... fastboot reboot-bootloader
it should reboot bootloader for u.. thats a easy way to know its responding to u
Is the device showing properly in the Device Manager when it's connected to your system?
hEaTLoE said:
Is the device showing properly in the Device Manager when it's connected to your system?
Click to expand...
Click to collapse
It shows up in windows explorer as "Nexus 6p" when I plug in the USB cable.
I have USB debugging and unlock bootloader checked in settings.
My fastboot devices command returns nothing.
peckaldee said:
It shows up in windows explorer as "Nexus 6p" when I plug in the USB cable.
I have USB debugging and unlock bootloader checked in settings.
My fastboot devices command returns nothing.
Click to expand...
Click to collapse
Did you change the USB mode? Mine shows in Explorer as you described but won't work in ADB/Fastboot until I change it to PTP.
fury683 said:
Did you change the USB mode? Mine shows in Explorer as you described but won't work in ADB/Fastboot until I change it to PTP.
Click to expand...
Click to collapse
Yeah I tried every option. Nothing.
The instructions say the fastboot devices command should return my serial number and it does not.
When booted into the bootloader one it tells me on one line phone LOCKED and on another line says download mode DISABLED.
Don't know if this has anything to do with my problems but I still cannot get a return on the fastboot devices command in order to proceed with the unlock command of "fastboot flashing unlock"
remember that u need latest fastboot for this to work.
did u updated the SDK manager to the latest? i had to do that in order to work for 6P
chaco81 said:
remember that u need latest fastboot for this to work.
did u updated the SDK manager to the latest? i had to do that in order to work for 6P
Click to expand...
Click to collapse
I'm using sdk manager revision 24.4.1
peckaldee said:
I have followed Heisenbergs instructions to the letter but when I issue the adb devices command it just returns the string "list of devices" and that's it. Fastboot devices doesn't work either.
So I'm stuck at the start. Can anyone help me? From what I can tell I may need drivers but I'm new to this so I don't know.
I can give anyone more info if they need it.
Click to expand...
Click to collapse
I had the same issue ,it was down to when I plugged the phone into the PC for the first time,it installed the Google.USB driver ,but it didn't install the driver for the adb interface,I had to download it from Google and install it manually
I also had the same issue, I had an old Clockworkmod generic driver that I was using for my Samsung Galaxy S5 installed.
Go to Device manager (either type it in the start menu, or: right click This PC, click manage, and click device manager), plug in your unlocked Nexus 6P phone and watch for a new item to pop up. If it says android something, uninstall it. I had to uninstall 3 times, then reinstall the drivers from the SDK before it would work.
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
mbonus said:
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
Click to expand...
Click to collapse
This worked. Now my commands in terminal are working correctly. thanks all for the help
Got A device to pop up under the command adb devices, but nothing under fastboot devices. Any tips? Had to follow the skipsoft instructions to install adb/fastboot devices. Yes USB Debugging is on and the OEM unlocking is set to allow..
Christ I'm retarded. Sorry boys, thought my phone was in the bootloader when I was trying this command LOL
Same problem
peckaldee said:
When booted into the bootloader one it tells me on one line phone LOCKED and on another line says download mode DISABLED.
Don't know if this has anything to do with my problems but I still cannot get a return on the fastboot devices command in order to proceed with the unlock command of "fastboot flashing unlock"
Click to expand...
Click to collapse
I'm having the same problem. Did you ever figure out what was wrong?
mbonus said:
I used the skipsoft toolkit to install the fb drivers; worked for me. http://forum.xda-developers.com/nex...ol-skipsoft-android-toolkit-nexus-6p-t3234159
but like others said, you may have to manually remove any that are already installed in windows, although I think that is one of the options in the toolkit.
Click to expand...
Click to collapse
Solved my problem as well. Thanks!
I had installed Moto drivers and also enabled the usb debugging but my my device is not showing in fastboot mode.
Seriously need help.
Thank you.
Just to clarify, when you reboot your device into the bootloader (fastboot), if you type the command 'fastboot devices' (without quotes) in ADB, you get nothing showing up in the device list?
Which Moto drivers are you using, what device do you have and are you issuing the commands via minimal ADB or another ADB command tool?
echo92 said:
Just to clarify, when you reboot your device into the bootloader (fastboot), if you type the command 'fastboot devices' (without quotes) in ADB, you get nothing showing up in the device list?
Which Moto drivers are you using, what device do you have and are you issuing the commands via minimal ADB or another ADB command tool?
Click to expand...
Click to collapse
I am using Motorola device manager drivers and using minimal adb tools
When I type command mfastboot devices nothing shows.
And I am trying to flash TWRP recovery it's saying waiting for device
Robinson#2 said:
I am using Motorola device manager drivers and using minimal adb tools
When I type command mfastboot devices nothing shows.
And I am trying to flash TWRP recovery it's saying waiting for device
Click to expand...
Click to collapse
Turn on your phone and run " adb devices " then see if it's getting connected in power on mode or not.. if not then try to install Adb Drivers..
Tried with ADB drivers still not working. I think its a driver problem how to reset drivers in Windows 10 machine
Robinson#2 said:
Tried with ADB drivers still not working. I think its a driver problem how to reset drivers in Windows 10 machine
Click to expand...
Click to collapse
It's same as you do in other Windows, go to "Device Manager" you will find device related name in that Tree,
Uninstall it and update again..
____Mdd said:
It's same as you do in other Windows, go to "Device Manager" you will find device related name in that Tree,
Uninstall it and update again..
Click to expand...
Click to collapse
Tried that but didn't worked
Robinson#2 said:
Tried that but didn't worked
Click to expand...
Click to collapse
Is it same computer that you used to unlock?
Had it worked to get unlock data and for unlocking..?
____Mdd said:
Is it same computer that you used to unlock?
Had it worked to get unlock data and for unlocking..?
Click to expand...
Click to collapse
Yes it's the same computer I used to unlock bootloader and flashed stock nougat with fastboot method 3 months back.
Robinson#2 said:
Yes it's the same computer I used to unlock bootloader and flashed stock nougat with fastboot method 3 months back.
Click to expand...
Click to collapse
If installing drivers again, use of different USB port, different data cable don't work then better to use different PC..
____Mdd said:
If installing drivers again, use of different USB port, different data cable don't work then better to use different PC..
Click to expand...
Click to collapse
I am going to try with a bootable pendrive with linux mint.
Robinson#2 said:
Tried with ADB drivers still not working. I think its a driver problem how to reset drivers in Windows 10 machine
Click to expand...
Click to collapse
If you're on Windows 10 with an UEFI firmware, I recall you need to disable driver signature enforcement if you wish to use fastboot. Credit to: https://forum.xda-developers.com/showpost.php?p=70792544&postcount=2028
Hopefully it'll work with the Linux distro though
echo92 said:
If you're on Windows 10 with an UEFI firmware, I recall you need to disable driver signature enforcement if you wish to use fastboot. Credit to: https://forum.xda-developers.com/showpost.php?p=70792544&postcount=2028
Hopefully it'll work with the Linux distro though
Click to expand...
Click to collapse
This was very helpful. Took me hours to find it but glad I did. On to step 2. lol How I was able to fix not being able to load anything in fastboot was this.
1. I right clicked on the Motorola_Mobile_Drivers_64bit.msi and selected uninstall. Repair did nothing.
2. Rt click view properties of Motorola_Mobile_Drivers_64bit.msi.
3. On the general tab I noticed it was blocked so I unblocked it.
4. Then switched to Compatibility tab.
5. Selected run compatibility mode, any previous version of windows.
--This stops the version checker
6. Hit apply save and ran it.
MrTwigglesworth said:
This was very helpful. Took me hours to find it but glad I did. On to step 2. lol How I was able to fix not being able to load anything in fastboot was this.
1. I right clicked on the Motorola_Mobile_Drivers_64bit.msi and selected uninstall. Repair did nothing.
2. Rt click view properties of Motorola_Mobile_Drivers_64bit.msi.
3. On the general tab I noticed it was blocked so I unblocked it.
4. Then switched to Compatibility tab.
5. Selected run compatibility mode, any previous version of windows.
--This stops the version checker
6. Hit apply save and ran it.
Click to expand...
Click to collapse
Bro i didi not detecting please help
For some reason I cannot for the life of me connect the phone to ADB. It, ADB nor Fastboot can ever recognize that my XZP is there. I've done this many times with other phones. I'm positive I have the correct drivers. I'm on a PC with Windows 10. Any suggestions?
You should not be that positive regarding Windows 10 drivers???
Try manually delete the drivers then try again.
droidnew said:
For some reason I cannot for the life of me connect the phone to ADB. It, ADB nor Fastboot can ever recognize that my XZP is there. I've done this many times with other phones. I'm positive I have the correct drivers. I'm on a PC with Windows 10. Any suggestions?
Click to expand...
Click to collapse
I know it sounds stupid, but do you have usb debugging on in developer settings?
Beetle84 said:
I know it sounds stupid, but do you have usb debugging on in developer settings?
Click to expand...
Click to collapse
No it doesn't sound stupid. I actually forgot to do that in the past. However, this time it is on...
Beetle84 said:
I know it sounds stupid, but do you have usb debugging on in developer settings?
Click to expand...
Click to collapse
droidnew said:
No it doesn't sound stupid. I actually forgot to do that in the past. However, this time it is on...
Click to expand...
Click to collapse
I still haven't figured this out if anyone has an idea...
Would factory reseting help at all?
droidnew said:
I still haven't figured this out if anyone has an idea...
Would factory reseting help at all?
Click to expand...
Click to collapse
You can try, but I don't think a factory reset would help. I mean, fastboot should work regardless if you have the drivers installed (drivers will automatically install anyway). Does the blue led light up when you attempt to connect your phone via fastboot?
If you are trying to access ADB via Powershell in Windows 10 it doesn't work. It works with CMD prompt(Admin).
If you have tried with CMD and it didn't work, you may have to try reinstalling the drivers after booting to "Disable Signed Driver Enforcement" in Windows 10.
gowthamachandran said:
If you are trying to access ADB via Powershell in Windows 10 it doesn't work. It works with CMD prompt(Admin).
If you have tried with CMD and it didn't work, you may have to try reinstalling the drivers after booting to "Disable Signed Driver Enforcement" in Windows 10.
Click to expand...
Click to collapse
iArvee said:
You can try, but I don't think a factory reset would help. I mean, fastboot should work regardless if you have the drivers installed (drivers will automatically install anyway). Does the blue led light up when you attempt to connect your phone via fastboot?
Click to expand...
Click to collapse
The blue light does come on when I connect. I have also booted the computer and did the "Disable Signed Driver Enforcement" but I will try again...
gowthamachandran said:
If you are trying to access ADB via Powershell in Windows 10 it doesn't work. It works with CMD prompt(Admin).
If you have tried with CMD and it didn't work, you may have to try reinstalling the drivers after booting to "Disable Signed Driver Enforcement" in Windows 10.
Click to expand...
Click to collapse
I wound up doing this again, and the drivers installed. Maybe they didn't install last time, or I installed more drivers and got the right one in this time.. But, I am now able to connect to ADB and FASTBOOT. Thanks for the help guys!!
I can't unlock bootloader any one have tips to do it..
I got messages att i must install usb drive.. But i don't know how i will this.. I road in sony website but its don't resolve the problem.
Qusay86 said:
I can't unlock bootloader any one have tips to do it..
I got messages att i must install usb drive.. But i don't know how i will this.. I road in sony website but its don't resolve the problem.
Click to expand...
Click to collapse
If you are struggling to find the Google USB drivers for ADB then perhaps unlocking your bootloader is not for you.
Didgesteve said:
If you are struggling to find the Google USB drivers for ADB then perhaps unlocking your bootloader is not for you.
Click to expand...
Click to collapse
Is this the problem?
I would suggest to use a live Linux box, things will be much easier.
uzerzer said:
I would suggest to use a live Linux box, things will be much easier.
Click to expand...
Click to collapse
Absolutley, if he can't fanid any USB drivers then building a Linux box will be a doddle:laugh:
droidnew said:
I wound up doing this again, and the drivers installed. Maybe they didn't install last time, or I installed more drivers and got the right one in this time.. But, I am now able to connect to ADB and FASTBOOT. Thanks for the help guys!!
Click to expand...
Click to collapse
May i know which driver you use?