RK3188-T RTL8723BS wifi help - Android Stick & Console RockChip based Computers

I bought a MK809IV tv stick (red slider) from a Chinese site. I tried to flash a different firmware without getting a backup. It writes X3_V30 20150805 on its board. It has rk3188-t chip with RTL8723BS wifi. I tried too many different firmwares. Some of them didn't even boot and some of them booted succesfully. But the problem is wifi doesn't work. I turn it "ON" but it becomes "OFF" again. I also tried different kernels but the result is same. Please help me.Here is dmesg message:
h t tp://ww w119.zippyshare. com/v/WljzkpvW/file.html
or
h tt p://dosya.co/0h6kqozwzkh5/dmesg.txt.html
Please delete the blanks
Please help.

any help will be appreciated.

Still need help?

spade2be said:
Still need help?
Click to expand...
Click to collapse
no, thank you. Finally, I found a working firmware.

Hey,
I have the same problem as you. Which Firmware do you use for your stick now?
Thank you

pelase tell me were can I found it, I have the same problem and I donĀ“t find one that work, thank you

Related

Problem With Flashtool.

hello xda . I have problem with flashtool. when i connect my phone it tells "Device Connected in Flash Mode. And When i go to install kernel it doens't Find my device "and i get error" . can anyone tell me what to do ? Thanks in Advance.
Uploaded with ImageShack.us
Can you provide us the exact things you do?
Like said in the other thread, things like turn phone off, press back button etc?
We can't help you too much with too less information..
TimeWasterNL said:
Can you provide us the exact things you do?
Like said in the other thread, things like turn phone off, press back button etc?
We can't help you too much with too less information..
Click to expand...
Click to collapse
sry now i tryed your way and i did it. if i will have other problem i will post. Thanks
Glad it helped.
But if i may give you a hint. Try to read most things as carefull as possible, most problems are made because people don't follow every step right.

Wi-Fi doesnt want to work

Hello guys, I bought my SGS 4 9505 before 2 days and I still cant find a solution for this problem. I've flashed 2 modems, the last one was those: https://docs.google.com/file/d/0B2liy7wkwCSJVTgtZmlkX0EwbTQ/edit?pli=1, before 10 mins I did a factory reset but still I cant use my Wi- Fi. Whats exactly the problem is ? Well, when I turn on my Wi Fi (nevermind from where - slide menu or settings menu) it doesnt want to start. When I turn it on from settings menu, the slider changes from 0 to 1 (but not in green, staying gray) and for 5-10 seconds it says: "Turning on..." adn then the slider (which is on top,right) from gray (dark) 1 go to 0 again. When I try from Slide menu, it happens NOTHING. The color of line under the wi-fi picture is dark (smooth) green and it doesnt change.
If there is someone who can help me I will gratefull. Thank you previously.
To less info to solve your problem. Rom, modem etc
boterkaaseneieren said:
To less info to solve your problem. Rom, modem etc
Click to expand...
Click to collapse
In that case, which modem ? I will try to avoid flashing new ROM, becuase somewhere I have read that they are still not stable and most of them prefers Stock rom
d3adly said:
In that case, which modem ? I will try to avoid flashing new ROM, becuase somewhere I have read that they are still not stable and most of them prefers Stock rom
Click to expand...
Click to collapse
Then don't, if that's written somewhere :good:
Pfeffernuss said:
Then don't, if that's written somewhere :good:
Click to expand...
Click to collapse
Can you understand that im a newbie about this phone and I believe at everything what I read ? You are not helping me with this reply, :|
Dude,
Just go to this page http://forum.xda-developers.com/showthread.php?t=2192025
Hopefully it will resolve your wifi issue. Cheers! :highfive:

Network Signal Problem

My S4 tends to lose network signal quite frequently and I get a message "Not Registered on Network" its really frustrating as important calls are often missed.
I must restart the phone to regain my signal back. I have also gotten a replacement sim from my provider but that doesn't seem to have helped at all.
The issue still persists.
Last night I have upgraded my firmware to 4.3 in hope that would clear the issue but it just has happened again.
I do not think there is anything wrong with the handset before anyone suggest that.
How can this be solved?
Thank you,
alpha9ner
anyone?
Reflash the modem
Hi thanks for the reply, I know it might be a noob question, but how do I reflash the modem and where do I find the correct file to flash thanks
alpha9ner said:
Hi thanks for the reply, I know it might be a noob question, but how do I reflash the modem and where do I find the correct file to flash thanks
Click to expand...
Click to collapse
I hope your problem is solved...
but you can find modems here...
http://forum.xda-developers.com/showthread.php?t=2192025
i have same problem after upgrading to 4.3 and i still cant make it to work... Seleting GSM network only from Mobile Network can fix your problem but it will put you on 2g mode....
Anyways let me know please if you have found any solution?
Thanks
Ali
alpha9ner said:
Hi thanks for the reply, I know it might be a noob question, but how do I reflash the modem and where do I find the correct file to flash thanks
Click to expand...
Click to collapse
This are steps for upgrade ur MODEM/Baseband:
- Use Odin v3.09
- Untick Autoreboot
- Flash modem
- Reboot manually into Download Mode using (Vol Down plus Home button combi)
- Flash Modem once more
- Once done, unplug then reboot device manually.
- If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.

Please help! Galaxy S6 Bricked. [Solved. Thanks Koop1955]

Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Okay so here is what fixed it for anyone else like me that is a noob, and does dumb stuff to their phone. You cant roll back to old firmwares. You have to flash to the latest firmware that was on the phone or newer. I found the updated firmware and its good to go.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
Many thanks to koop1955 for his help, and thanks to everyone that jumped in to help a poor noob.
Demijinx said:
Hi guys, Ive searched and searched, but couldnt find anything that worked for me, so I apologize if this has been answered before.
I attempted to root my GS6 Sprint phone, and something has gone wrong. When the phone reboots the touch screen doesnt work at all and it doesnt find any cell signals.
I flashed to S6-UniKernel_v6-0001-ODIN, the firmware on the phone at the time was 5.1.1.
I tried to flash back using G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar. but I get "FAILED" every time.
So I tried to install twrp-2.8.7.1-zeroflte.img, and that seemed to install fine, but I cant reset because even in TWRP I have no use of my touch screen.
I am using the samsung cable, and it does go to the Downloading mode, but as soon as I click start it fails.
Anyone that can help me fix this I would gladly paypal the cost of a six pack. (Mods if this isnt allowed please let me know)
Click to expand...
Click to collapse
Anybody? Literally ANY idea is worth a shot at this point.
Did you use Odin to root the device? What options did you set?
Zoolok said:
Did you use Odin to root the device? What options did you set?
Click to expand...
Click to collapse
Thanks for the reply Zooklok, I did use Odin, and I didnt change any settings.
So checked boxes under options are;
Auto Reboot
F. Reset Time
Thats all. I clicked "AP" to load the firmware, then clicked start.
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
selferng said:
Hello.. Assuming your phone is already rooted. Pls follow the below procedure
1. Restart and let the phone biot. Plug in your usb and insert a new for installation purpose
2. Hold and press power+up+home button to boot into recovery
3. Format and reflash the new rom
Should works like a charm
Click to expand...
Click to collapse
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Demijinx said:
Thanks for the feed back selferng, when I reboot into recovery, I cant select anything because the touch screen doesnt work
Click to expand...
Click to collapse
Can u use the hardware button to select? Volume up and down and power button to select
selferng said:
Can u use the hardware button to select? Volume up and down and power button to select
Click to expand...
Click to collapse
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Demijinx said:
Okay so I grabbed the lastest ODIN and was able to go back to the stock recovery. I performed a wipe/factory reset, but it still wont let me use the touch screen! ARG! It didnt clear the new kernel. Could it be because Im flashing to an older firmware? I cant find 5.1.1 anywhere...
Click to expand...
Click to collapse
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
nms247 said:
Is the a Galaxy s6 or a S6 edge+ of edge+ you've been flashing the wrong firmwares, which would explain the issues you're having
Click to expand...
Click to collapse
Its the regular S6, not the edge. So the firmware is correct?
a. felon said:
Try a different cable or usb port or redownload the firmware file as it may be corrupted.
Press thanks if I helped.
Click to expand...
Click to collapse
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
B3311 said:
You're on the wrong forum. This is for the Edge+. You have a S6. Not Edge, not +.
Click to expand...
Click to collapse
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
UPDATE! FIXED IT!
I tried a different root method
http://trueandroid.com/g920pvpu2bof...mware-sprint-galaxy-s6-sm-g920p-how-to-guide/
This worked the first time, and restored the touchscreen functions. Thank you everyone for your help.
Demijinx said:
Its the regular S6, not the edge. So the firmware is correct?
I will trying downloading again. I have tried all my USB ports and the original cable and a brand new one.
Dang! Mods can we move this? Sorry guys.
Guys thanks for helping me out with this, all the responses are appreciated.
Click to expand...
Click to collapse
Had to ask this being the edge+ forum
Sent from my SM-G928F using Tapatalk
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Demijinx said:
Alright I spoke too soon. I got to my desktop once, now it just says:
Kernel Is not seadroin enforcing
Custom binary blocked by FRP lock.
Ugg. Lol I need help again.
Click to expand...
Click to collapse
Ok I know one thing for sure, you are not the first to face this but it seems to be solved by flashing the tar file for your device. More info here http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Good luck
Don't forget to Press that thanks button ?.
koop1955 said:
Minor correction. You can use the version that you started with or a later version. The only problems come if you try to use an earlier version, like going from 5.1.1 back to 5.0.2. Which won't work.
Here is the latest version available, should always work: https://www.androidfilehost.com/?fid=24269982087002159
Odin is available here: http://www.samsungodindownload.com/
Click to expand...
Click to collapse
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Demijinx said:
koop1955 had the link. Koop, if you read this, hit me up with your paypal, I owe you some beer.
Click to expand...
Click to collapse
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
koop1955 said:
Sorry, man, I won't accept it. I do this stuff for love and need to keep it pure.
But please Pay It Forward. Help somebody as you are able to.
Click to expand...
Click to collapse
Will do brother. Thank you so much, you really pulled me out of a spot. Im used to paying for everything in "Military Currency". Thank you again.

SM-N910F HARD brick! Desperate and running out of ideas..?!

Hi guys!
I would just like to start by apologizing for making another thread about a bricked note4, however I have read about so much I don't know which advice to go with anymore. I'm also a complete novice when it comes to this.
So long story short, my note 4 started playing up and lagging, eventually not turning back on at all. After endless attempts using odin and flashing what I seemed to have thought was the right firmware, it whittled down to about 1 in 5 attempts of trying to enter download mode (using the buttons) on the phone actually working. Now its completely bricked...no power, no download mode, nothing!
Just like to reiterate, I'm a complete novice,sorry if I'm not making sense, my knowledge doesn't go further than articles and google!
I have tried using kies to recover my phone and it cant recognize it...
I have read about using adb to get my phone into download mode, but I couldn't understand the explanation given well enough to use it...
I bought a 16gb micro sd card and have tried writing an unbrick image to it but I get no response off my phone, also tried another file, possibly sdc? cdc? cant quite remember, but that failed too.
I don't even know if the files I'm using are correct, I got them from a forum on here.
I'm at a loss!
The only hope I have left is if someone is able tell me if any steps I have tried are correct, and possibly provide me with the correct unbrick image?
Also, when I plug my phone into my computer via usb, there is a noise that sounds but nothing else happens, don't know if these means anything. As far as I'm aware I also have correct drivers installed.
Sorry about the long explanation!
Any help is greatly appreciated!
Thanks in advance.
Lucy.
Only logical result from your explanation is you have a hardware problem.
I dont think you are gonna be able to solve it with software...
Time for service visit i guess..
Turkawa said:
Only logical result from your explanation is you have a hardware problem.
I dont think you are gonna be able to solve it with software...
Time for service visit i guess..
Click to expand...
Click to collapse
Thanks for the reply!
I hope that's not the case forgot to mention,when I plug my phone into a computer and go into device manager, it shows qhsusb_bulk...if this means anything to you?
Lucyhenn123 said:
Thanks for the reply!
I hope that's not the case forgot to mention,when I plug my phone into a computer and go into device manager, it shows qhsusb_bulk...if this means anything to you?
Click to expand...
Click to collapse
Nope.. I have no idea.. Sorry
Try the sd recovery method .
First you can try to flash the pit partion .
You can find that on xda .
Just search for note 4 pit files.
Download the n910f pit file with correct csc.
TRY flashing via download mode.
Try flashing .
Use this guide for using sd card to get into download mode if you cant access download mode
There is a method for http://cloud.tapatalk.com/s/57e756f41dc6e/read me for brick fix.txt
Reporting via N910G

Categories

Resources