Related
I flashed stock firmware via odin, but before I clicked start I left my tablet to charge for a bit. While I was gone my son had been messing with my laptop without my knowledge, but I'm not sure whether he ticked one of the boxes on ODIN or not.
Anyway, I went back later and began the flash. It finished successfully. Then I started up my note 10.1 and the splash screen was showing white lines across the screen instead of the usual "Samsung Galaxy Note 10.1" screen.
Sometime it shows the 'download mode' screen for a few seconds too.
Here is a video showing what happens...
https://www.youtube.com/watch?v=-9gFJBz0THc
How do I get it back to normal and why did this happen? Also, will this effect how my tablet runs in any way?
I've tried flashing the firmware again via ODIN and again via kies, with no luck.
Sent from my GT-N7100 using Tapatalk 2
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
Nobody?
Sent from my GT-N7100 using Tapatalk 2
CuBz90 said:
Nobody?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I wouldnt be complaining about it, looks pretty cool.
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
younix258 said:
I wouldnt be complaining about it, looks pretty cool.
Click to expand...
Click to collapse
How does it look cool? lol
It's extremely annoying.
Sent from my GT-N8010 using Tapatalk HD
My tablet does the same thing, it did this after I flashed with Odin as well. It does not really bother me that much though because I rarely ever shut down my tablet.
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
Notex! said:
My tablet does the same thing, it did this after I flashed with Odin as well. It does not really bother me that much though because I rarely ever shut down my tablet.
Click to expand...
Click to collapse
Well its annoying when I boot up but I really want to get rid of it for future resell.
Sent from my GT-N8010 using Tapatalk HD
CuBz90 said:
How do I get it back to normal and why did this happen? Also, will this effect how my tablet runs in any way?
Click to expand...
Click to collapse
No clue as to why it happened. If you've reloaded the s/w again successfully via Odin and it's still there I'd try a hard reset from recovery. Turn it off and when it restarts hold "power/volume up" and select "wipe data/factory reset" as shown below. It might just be a coincidental h/w issue that popped up. But the fact "download mode" appears occasionally makes that improbable. You can always send it in for repair claiming ignorance. If you've only used Odin to flash stock s/w for your device's model (EG: N8010>N8010) Samsung will be none the wiser.
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
BarryH_GEG said:
No clue as to why it happened. If you've reloaded the s/w again successfully via Odin and it's still there I'd try a hard reset from recovery. Turn it off and when it restarts hold "power/volume up" and select "wipe data/factory reset" as shown below. It might just be a coincidental h/w issue that popped up. But the fact "download mode" appears occasionally makes that improbable. You can always send it in for repair claiming ignorance. If you've only used Odin to flash stock s/w for your device's model (EG: N8010>N8010) Samsung will be none the wiser.
Click to expand...
Click to collapse
The strange things are that when the download mode shows at the beginning of a boot, it's always just a kind of screen shot from when I last went into download mode. Plus everything is working perfectly fine, the system runs as it usually would, same speed, etc. I can still root, flash a recovery, flash custom ROMS, etc.
I've already tried what you said, numerous times. I've flashed a few times too, completely erasing system, data and cache before flashing. I'm currently using a custom ROM and everything is working perfectly fine. The boot issue is the only thing wrong with the tablet. Surely there's a way to change it? Like flashing a boot animations?
I thought maybe it's soft bricked? I read somewhere that flashing the PIT would fix the issue I'm having, but i can't find the N8010 PIT file anywhere
Sent from my GT-N8010 using Tapatalk HD
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
I've come to the conclusion that 'NAND erase all' had been ticked on Odin. What exactly does that do and can I reverse it?
Sent from my GT-N8010 using Tapatalk HD
did u flash different model rom with nand erase ticked?if u did then u must have messed up bootloader.i use to have att infuse and i flashed rom from canada infuse and was having same screen issue at boot.
Re: My Note 10.1 shows a fuzzy/white lined screen when booting up ??? [Video]
mintu123 said:
did u flash different model rom with nand erase ticked?if u did then u must have messed up bootloader.i use to have att infuse and i flashed rom from canada infuse and was having same screen issue at boot.
Click to expand...
Click to collapse
No I flashed the stock rom, the one that was on my note when I bought it
Sent from my GT-N8010 using Tapatalk HD
CuBz90 said:
I've come to the conclusion that 'NAND erase all' had been ticked on Odin. What exactly does that do and can I reverse it?
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
There is no "nand erase all" option in the odin version you should be using.
legion1911 said:
There is no "nand erase all" option in the odin version you should be using.
Click to expand...
Click to collapse
I had no clue I should be using a certain version of Odin, I assumed latest version was best version to use.
Does this mean there's nothing I can do?
I've also noticed that after flashing stock firmware via Odin, the phone stays stuck on the bootloader, unless I do a factory reset in recovery.
I guess for now there is nothing I can do. Nobody seems to know what the problem is.
Finally fixed it!!
I don't know exactly what did it, but I flashed the new N8010 4.1.2 firmware via Mobile Odin, and it was as good as new
Thanks to everyone that tried to help
CuBz90 said:
Finally fixed it!!
I don't know exactly what did it, but I flashed the new N8010 4.1.2 firmware via Mobile Odin, and it was as good as new
Thanks to everyone that tried to help
Click to expand...
Click to collapse
Thanks, it fixed it for me as well . I'm assuming in this firmware they fixed the exynos exploit, so they must of changed something in the bootloader or something, which happened to fix this? I do not really know.
Notex! said:
Thanks, it fixed it for me as well . I'm assuming in this firmware they fixed the exynos exploit, so they must of changed something in the bootloader or something, which happened to fix this? I do not really know.
Click to expand...
Click to collapse
I've looked and this update does update to a new bootloader, so that is what has fixed it.
Sent from my GT-N8010 using Tapatalk HD
its a recovery issue
younix258 said:
I wouldnt be complaining about it, looks pretty cool.
Click to expand...
Click to collapse
i have the same problem, the reason was cwm recovery!!! if you use twrp it will be fine !!
CuBz90 said:
I've looked and this update does update to a new bootloader, so that is what has fixed it.
Sent from my GT-N8010 using Tapatalk HD
Click to expand...
Click to collapse
gosh, i need to resell this tmr, and this situation happen to me now....... i think this is the only hope for me...
i also press tnand erase when i flash my stock rom... oh please..make it work..:crying:
Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
It would help to know what device you have, what firmware you where on and what kernel you tried to flash
hailthethief said:
Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
Click to expand...
Click to collapse
Can get into recovery?
Sent from my SAMSUNG-SGH-I727 using xda premium
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Does Odin say successful? Do you know what firmware you were on?
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked,if not you may be able to get the pit file and fix it
Sent from my SAMSUNG-SGH-I727 using xda premium
jd1639 said:
Does Odin say successful? Do you know what firmware you were on?
Click to expand...
Click to collapse
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
captivated1971 said:
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I did not use the jig.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
Click to expand...
Click to collapse
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
id try this again with odin least wise if it works you will have to reroot again http://forum.xda-developers.com/showthread.php?t=2261573
jd1639 said:
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
Click to expand...
Click to collapse
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
hailthethief said:
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
Click to expand...
Click to collapse
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Azzair113 said:
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Click to expand...
Click to collapse
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
hayden55 said:
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
Click to expand...
Click to collapse
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
thanks for the reply. i will give it a shot. *Fingers Crossed*
hayden55 said:
thanks for the reply. i will give it a shot. *Fingers Crossed*
Click to expand...
Click to collapse
np hope it works
Azzair113 said:
np hope it works
Click to expand...
Click to collapse
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
hayden55 said:
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
Click to expand...
Click to collapse
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
I just tried this with the UAMDB md5 file since thats the one that came with my phone and it didn't work. hmmmm
Azzair113 said:
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Click to expand...
Click to collapse
I know that you would think that it would be the newbie mistake to install an tw kernel on top of a aosp ROM, but I made 100% sure to choose the correct ROM. I know the difference between touch wiz and also.
Also, sorry to hijack the thread I just saw it and figured since we both have the same problem we might all solve it together.
I recently rooted my note3 and installed xpose framework and other tweaks. i later realised that my power button cant lock and put my device into my lock screen.
the power button still works for everything else and i have a software button to bring it to the lock screen which i made using the "greenify app".
whats causing this and is there any fix? or any ways to put the device into safe mode ans see if this is caused by some faulty tweak? bug?
Summary:
"Power button works for everything except putting the phone to lockscreen/screen blackout"
Basic solution is to go to security and check "power button instantly locks" something like that.
Sent from my SM-N9005
not the fix
jdgamble said:
Basic solution is to go to security and check "power button instantly locks" something like that.
Sent from my SM-N9005
Click to expand...
Click to collapse
Thans for the reply.
i do know how to fix that..
but Thats not the issue. It doesnt even go to a black screen when i click the power button. just no response at all.
Rysekhon said:
Thans for the reply.
i do know how to fix that..
but Thats not the issue. It doesnt even go to a black screen when i click the power button. just no response at all.
Click to expand...
Click to collapse
List the modules you installed. It is possible that something is overriding the button function.
Sent from my SM-N9005
factory reset
jdgamble said:
List the modules you installed. It is possible that something is overriding the button function.
Sent from my SM-N9005
Click to expand...
Click to collapse
I removed all my modules and root permissions and used super user to remove my root.
Ive backed up all my data, removed my root access and im planning to do a factory reset. That should fix it right? Is it possible to soft brick my device this way?
Im fluent when it comes to jailbreaking but still a total noob with rooting.
rysekhon2 said:
I removed all my modules and root permissions and used super user to remove my root.
Ive backed up all my data, removed my root access and im planning to do a factory reset. That should fix it right? Is it possible to soft brick my device this way?
Im fluent when it comes to jailbreaking but still a total noob with rooting.
Click to expand...
Click to collapse
Factory reset will delete all data photos, music, vids, contact and messages etc. If you've backed up everything then you are good to go for factory reset and will welcome you back to fresh out of the box phone. And no soft brick can occur by doing this.
Sent from my SM-N9005
jdgamble said:
Factory reset will delete all data photos, music, vids, contact and messages etc. If you've backed up everything then you are good to go for factory reset and will welcome you back to fresh out of the box phone. And no soft brick can occur by doing this.
Sent from my SM-N9005
Click to expand...
Click to collapse
Did a factory reset but the problem is still here. Can't put my screen to sleep with the power button. This is really bugging me. Don't see any posts related to this online
---------- Post added at 05:57 AM ---------- Previous post was at 05:47 AM ----------
rysekhon2 said:
Did a factory reset but the problem is still here. Can't put my screen to sleep with the power button. This is really bugging me. Don't see any posts related to this online
Click to expand...
Click to collapse
my phone can't time out. Think the app greenify must of messed up my phone somehow.
Have you tried a battery pull after FR?
Sent from my SM-N9005
jdgamble said:
Have you tried a battery pull after FR?
Sent from my SM-N9005
Click to expand...
Click to collapse
Battery pull as in remove and put the battery back in? Yes but not in any special way?
Hmmmm...this is odd. Can't seem to figure out anything that would mess up power button in such a manner.
You're on stock rom right? Nothing fancy done to your phone.
Sent from my SM-N9005
jdgamble said:
Hmmmm...this is odd. Can't seem to figure out anything that would mess up power button in such a manner.
You're on stock rom right? Nothing fancy done to your phone.
Sent from my SM-N9005
Click to expand...
Click to collapse
yea im on a stock rom. googled " note3 wont time out" and some people are having the same problem. havent found a fix yet tho. right now just leaving my note3 with battery out.
will try start in safe mode and see fi i can put it to time out
Rysekhon said:
yea im on a stock rom. googled " note3 wont time out" and some people are having the same problem. havent found a fix yet tho. right now just leaving my note3 with battery out.
will try start in safe mode and see fi i can put it to time out
Click to expand...
Click to collapse
safemode didnt work as well. any way to totally fix it?
flash in a brand new rom? like start from totally clean note3
Rysekhon said:
safemode didnt work as well. any way to totally fix it?
flash in a brand new rom? like start from totally clean note3
Click to expand...
Click to collapse
i was playing with boot animations last night. that could of caused it? http://forum.xda-developers.com/showthread.php?t=2486469
Very interesting...
I discovered that if I renamed the boot animation qmg file under \system\media , the screen won't turn off. Once I restored the file, all is well.
Why is this?
how to i reset all this without doing it manualluy?
I'm assuming it's coded as most hardware functions are. Anyway applause for finding the solution on your own, well done.
ddogishere said:
I'm assuming it's coded as most hardware functions are. Anyway applause for finding the solution on your own, well done.
Click to expand...
Click to collapse
i havent found a solution :/.
will try reinstall from a stock rom. first time doing this tho. any tips? or webistes where i can get roms? im scared i might install and download the wrong rom.
I tried to downgrade my rooted firmware from 511070220 to 510058520. After reboot I get a lockscreen. Anyone know how to fix this?
Only pressing the option key brings me to the regular menu.
yazyazoo said:
I tried to downgrade my rooted firmware from 511070220 to 510058520. After reboot I get a lockscreen. Anyone know how to fix this?
Only pressing the option key brings me to the regular menu.
Click to expand...
Click to collapse
You might need to do a factory reset.
rbox said:
You might need to do a factory reset.
Click to expand...
Click to collapse
I have the two sites blocked and cwm installed. Is a factory reset safe?
yazyazoo said:
I have the two sites blocked and cwm installed. Is a factory reset safe?
Click to expand...
Click to collapse
Yes
nyder said:
Yes
Click to expand...
Click to collapse
Thanks a lot!
Hello there, I dropped my phone and now the screen won't turn, but the actual phone is starting up. How can I factory reset it through a adb? It is not rooted
Hope you can help.
philipposil said:
Hello there, I dropped my phone and now the screen won't turn, but the actual phone is starting up. How can I factory reset it through a adb? It is not rooted
Hope you can help.
Click to expand...
Click to collapse
You could remote wipe it if you have a google account connected to it.
I don't think it requires any other action except the phone having an internet connection.
By flashing a stock firmware and select a .pit file and check repartition. You have to know what you are doing though.
Or boot into the recovery, look for a screenshot of the recovery on google and try to factory reset it using the buttons.
Yes but that would be fairly trial and error.
Lennyz1988 said:
By flashing a stock firmware and select a .pit file and check repartition. You have to know what you are doing though.
Or boot into the recovery, look for a screenshot of the recovery on google and try to factory reset it using the buttons.
Click to expand...
Click to collapse
Unfortunately the phone wasn't set up for android device manager as device administrator so can't use this function.
Also the screen doesn't turn on, so can't use the buttons for doing a hard reset through recovery
philipposfil said:
Unfortunately the phone wasn't set up for android device manager as device administrator so can't use this function.
Also the screen doesn't turn on, so can't use the buttons for doing a hard reset through recovery
Click to expand...
Click to collapse
You can. But you have to estimate by using pictures of the stock recovery.
GDReaper said:
You can. But you have to estimate by using pictures of the stock recovery.
Click to expand...
Click to collapse
Any idea of where I can get pictures of that?
philipposil said:
Any idea of where I can get pictures of that?
Click to expand...
Click to collapse
Google images? "S4 stock recovery" as search terms?
It's very strange