X3 Android Smartwatch, beautiful than gear s2 - Other SmartWatches

X3 Android Smartwatch, Round Screen 1.44 inch, support wifi, sim card google play smartwatch
Product Overview
Model X3
Product modeling Android Smartwatch
System Android 4.4
Cpu MTK6572
Resolution 360 * 360 , 16 Million color
RAM 512MB
ROM 4GB
Wifi Support
Google Play Support
Features
Make calls Support
See text messages Support
Contacts Support
Heart Rate Support
Pedometer Support
Bluetooth BT2.1 + BLE4.0
Browser Support
Barometer Support
Voice Search Support
Alarm Support
Remote camera Support
Weather Support
Health Data Synchronization Support
Change Clock Face Support
Instill App
Support
Hardware
Speaker Support
Waterproof IP65
Battery capacity 450mAH
Vibration motor Support
Antenna Support
Side buttons Support
SIM card Support Micro SIM
Network 2G: GSM 850/900/1800/1900MHz; WCDMA 850/2100
Chargers Support
USB Support
G-SENSOR Support
The more important is, it had gear s2 design!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same thing as the K9, which is a K8 Mini/D5 but with 2 buttons instead of one.

Lokifish Marz said:
Same thing as the K9, which is a K8 Mini/D5 but with 2 buttons instead of one.
Click to expand...
Click to collapse
More important is that, it had gear s2 design

very good looking watch has anyone brought 1 yet?

I have two of them, silver and black. Can't get tmobile to work, only ATT. I thought they were on the same bands?

Is it possible the attached the companion app for this watch or the qr code?? The heartrate Monitor app for this watch. Seems more complex (as seen on aliexpress)

Got 1.Try to flash new watch skin but not working

hkgbenlo said:
Got 1.Try to flash new watch skin but not working
Click to expand...
Click to collapse
Did you get this watch or the the new one from No. 1 a G3 ?

I recently purchased this watch and am really pleased with it.
It has good build quality and unlike the No.1 D5 it has two buttons on the right side, one for the power and the other for the back button as well as the swipe down to go back.
I have also flashed the No1. D5 on it as it is the same specs.
If you have messed it up just download the rom from the No1 D5 site and flash it with that one.
http://en.001phone.cn/download-39.html
I had also backed up the old rom in case.
the only difference I found with the flashing instructions was that when you plugged in the watch to the computer when it was off, you had to just click the power button and it flashed with no problems.
Looks a very easy to custom rom watch.
Also I have found the manufacturers site if that helps too.
http://www.finowatch.com/index.php

2234jones said:
I recently purchased this watch and am really pleased with it.
It has good build quality and unlike the No.1 D5 it has two buttons on the right side, one for the power and the other for the back button as well as the swipe down to go back.
I have also flashed the No1. D5 on it as it is the same specs.
If you have messed it up just download the rom from the No1 D5 site and flash it with that one.
http://en.001phone.cn/download-39.html
I had also backed up the old rom in case.
the only difference I found with the flashing instructions was that when you plugged in the watch to the computer when it was off, you had to just click the power button and it flashed with no problems.
Looks a very easy to custom rom watch.
Also I have found the manufacturers site if that helps too.
http://www.finowatch.com/index.php
Click to expand...
Click to collapse
Yep - everything about this watch is here already http://forum.xda-developers.com/smartwatch/other-smartwatches/k9-3g-da-house-t3313103

charger for the x3: http://www.aliexpress.com/store/product/Charger-for-X3-smart-watch/1961560_32619423805.html

Where to get the health data sync support ?
And sync to where? Possible to sync to iPhone?

Yes, it sync both with iphone and android phone
Sent from my GT-P6800 using xda premium

ttam2007 said:
Yes, it sync both with iphone and android phone
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
i'm really a noob on andriod os....need all the help i can get . I muddeld with the X3 watch and found the "auto rotate screen" settings. I turned it on but now cant find where it is in order to turn it off. And i cant find any app to sync the health data over to iphone. Please advice

hey all, the developer of the M2D Sender and Reciever fixed some bugs with the app and is going to keep working on it to improve it
https://plus.google.com/u/0/communi...2/stream/ff4a6f3f-baa6-479f-abc6-3e7e4bcc84c0

hi
how to upgrade softwer whether someone knows

Related

So where are these features?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Advertised with these features and accessories, and yet now all evidence of them has been scrubbed from Samsung's web-sites. Even the Flash animation on the main Galaxy page has had a photograph of a woman placed over the point where the home dock used to be.
Pros & Cons... These are the cons.
Indeed, I wanted the dock, I wanted the remote, etc.
If they really don't want my money then they shouldn't have made the phone.
Alarm clock works for me.
kevo said:
Alarm clock works for me.
Click to expand...
Click to collapse
Really? because mine has no fade in, or clock home screen. It only comes on as the alarm goes off.
saw that on another forum - that is a little "unusual" - suppose this might be an interesting news tip for engadget to run a blurb on
wow they really changed the flash animation and got rid of the dock!
had to see it myself to believe this..
they also removed the scene where the guy was sitting on the couch using his galaxy like a TV remote
makes you question a lot about what in the world is going on
it is just a Software feature.
my old Treo phones were able to remote control the TV via infrared
but the Windows Mobile couldn't do it, due the missing infra on the device.
SGS i9000 doesn't have an infrared AFAIK, so that ADvertizement might have been created before the final spec of the phone were engraved in stone, probably at one point they might have had infrared as part of the device spec.
HOWEVER!!! if that is a Windows based TV, then they can easily use bluetooth to control Windows Media Center, like many of my logitech remote controls at home
The alarm clock/smart alarm works splendid for me.
And yeah, they've removed the docking from the flash animation, but the remote is there still...
I really wanted that desk dock
@AllGamer: The phone is supposed to use DLNA (over wifi) to communicate with the television.
then the TV will need to be one of the newer types of TV that has that feature build in, else it's not gonna work / be compatible with older TVs
samsung has added some galaxy / vibrant accessories page
and interestingly, that media dock missing from the video is not there, but this one is - appears to be similiar, without speaker, but they're calling it a multi-media dock
not sure how, as it doesn't appear to connect to your computer - they describe you "use your travel / wall charger to charge your phone"
http://www.samsung.com/us/consumer/...ype=acc_detail&subsubtype=chargers&returnurl=
Looks like the original dock but without the speakers. And even this is a bit mean since they dont provide and additional power connector, you have to use the one that came with the phone.
Not sure how it can be a multi-media dock though.
AllGamer said:
it is just a Software feature.
my old Treo phones were able to remote control the TV via infrared
but the Windows Mobile couldn't do it, due the missing infra on the device.
SGS i9000 doesn't have an infrared AFAIK, so that ADvertizement might have been created before the final spec of the phone were engraved in stone, probably at one point they might have had infrared as part of the device spec.
HOWEVER!!! if that is a Windows based TV, then they can easily use bluetooth to control Windows Media Center, like many of my logitech remote controls at home
Click to expand...
Click to collapse
It' just software. The remote doesn't use infrared. It uses a proprietary technology that only works on Samsung TVs sold from 2010 on.
The Alarm clock works.
The dock isn't out, but then again, neither was the Nexus One's when the N1 came out. That one took how long? Couple months?

K-watch - New BT Smartwatch PreSale NOW

New Technology Color E-ink that enable you to have the screen
always ON... :good::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Professional Pedometer
You can even save your data to the smartphone app
Gesture control to turn on the screen
or answer a call...
This is a new Smartwatch in Pré-Sale at this time.
You can find it on the KEPphones site.
KEPphones is buying directly from the Manufacturer. K-watch is the Europe name.
Delivery date right after MAY,1 - free delivery for all Europe. No customs fee. :good:
Especifications:
1 Basics
Material: Leather and metal
Product size: 253*41.8*13.6mm
Supported Languages: Simplified Chinese, English, Germany, Italian, French, Spanish, Russia, Portugal and etc.
Supported device: Android OS Device
2 CPU
Model: MTK6250A
Processor: ARM Cortex-A7
3 Bluetooth
Technical requirements: Class1,2,3 transmission power standard
Model: Bluetooth® v3.0 + EDR standard
Antenna: LOOP Ceramic Antenna
4 LCD display
Display Size: 1.6" translucence TFT display
Resolution: 240×240 pixels
5 Touch screen
Type: Touch screen
Screen: Capacitive, multi-point touch screen
6 Heart rate test
Test type: Electrode type testing
Heart beat records could be uploaded to cloud server on smart phone APK
7 Pedometer
Free-scale pedometer
Sports records can be uploaded to cloud server on smart phone APK
8 Battery
Capacity: 400mAH
Standby: 100 hours
9 USB
Type: Micro USB
Interface: 5 PIN
10 Speaker
Supported
11 MIC
Supported
12 Vibration Motor
Supported
13 Power Button
Power on/off watch
Press the Power button for 6 seconds to reset
14 Package
Package Size: 80*80*75mm
Net weight: 0.06kg/pc
Accessories: USB cable and user's manual
PMoto
Nice one..
Sorry but the first is mine
Good find PMoto.
https://youtu.be/5gFzzwbpKYA - this is the video from the website. Hopefully the battery will last longer with the e-paper screen. Let us know please when you get a chance.
A watch like this with a SIM and would be a good idea.
i see a headphone symbol, another watch that NEEDS a audio connection to function?
that thing is HUGE!
menu's look familiar, another U8 clone?
(if the u8 is the original at all)
Well, this battery should last 3 days...
Uwatch?
My friend, this is nothing to do with Uwatch.
This is a superb smart wacth and you cant find it in Uwatch .
Its a stand alone and you can use it with Bt connection
Mine make 2 days allways on, the E ink screen is amazing.
4 days with no Bt connection.
Here's the smartphone app:
https://drive.google.com/file/d/0B36wHsfD85m5dHBaSktDemFEWVk/view
Try it out...
parfetto said:
My friend, this is nothing to do with Uwatch.
This is a superb smart wacth and you cant find it in Uwatch .
Its a stand alone and you can use it with Bt connection
Mine make 2 days allways on, the E ink screen is amazing.
4 days with no Bt connection.
Click to expand...
Click to collapse
It's a stand alone? As in it takes a SIM/GSM?
Rp
No, my fried..it uses Bt connection to make calls and sms ect.
Dont have sim slot.
Looks nice. Two days is good for battery .
Video
Take a look here:
https://www.youtube.com/watch?v=5gFzzwbpKYA
PMoto said:
Take a look here:
https://www.youtube.com/watch?v=5gFzzwbpKYA
Click to expand...
Click to collapse
i've already added that video...
... but more importantly, looks very similar to this: http://forum.xda-developers.com/sma...es/mimi-mi-w3-smartwatch-review-test-t2909470 - the MIMI MI-W3 Smart-watch, which is for $80 on Aliexpress: http://www.aliexpress.com/item/Wate...-5-5S-Samsung-gear-S4-Note-2/32227704277.html
. . . similar or exactly same?
Similar one
Very similar but not exacly the same. Even the app is diferent but with china manufactory we never know..hehe
This one is send from Portugal with all aduane and tax free. 2 years warranty.
parfetto said:
Very similar but not exacly the same. Even the app is diferent but with china manufactory we never know..hehe
This one is send from Portugal with all aduane and tax free. 2 years warranty.
Click to expand...
Click to collapse
What does your phone version read?
Mine is the 80.00 from ali SM-1 V-1.0.
Attached is english apk
Sorry just rename or install as is. Hard uploading files with phone
version
Mine is 1.1.17
parfetto said:
Mine is 1.1.17
Click to expand...
Click to collapse
Wish we had software to like backup and mod
APP to try in your language..
Try the app is linked in the post...
Maybe better then yours..
Give feedback..
Thanks but yours dont have Portuguese lang.
parfetto said:
Try the app is linked in the post...
Maybe better then yours..
Give feedback..
Thanks but yours dont have Portuguese lang.
Click to expand...
Click to collapse
Tryed app not english, I will decompile and compare and add English then give feed back
carl1961 said:
Tryed app not english, I will decompile and compare and add English then give feed back
Click to expand...
Click to collapse
KWatch looks interesting. I also tried the APP and it definitely needs an English version. I don't like the fact that you have to login/register to use the APP. Why is that? I just need it to sync with my phone and send info to the watch, not some database half way around the world.
APP
Ahhh, sorry guys.
Here the app multilanguage..the other is only PT.
http://cli.im/0z1Ws?jdfwkey=usxhr3

DZ09 Smartwatches MTK6261

Hello guys, i have bought this smartwatch yesterday that branded by Maxxout with mediatek 6261. Different a bit with mediatek 6260a. There is no themes, radio, calculator and there is have facebook, browser and twitter but cant access even i have putted the sim card. My question is, is this have any firmware that i can flash so that i can improve the function? The design was very elegance same like Galaxy Gear 2. I really need to use this smartwatch badly. Anyone who knows about this, please help me (
(sorry for my broken english)
If you bought this watch:
http://www.ecubestore.com/products/Maxxout-DZ09-Touch-Screen-Sim-Card-Smart-Watch-Phone/5
unfortunately that model has nothing to do with Android Wear and possibly even with Android itself, it only shows on the screen some icons similar to Android.
Exactly. I bought from this seller. This model has much problem. This is just wasted my money. The descriptions told that this is mtk6260a but when received the parcel, there is totally the fake one with the same material and design. Dissappointed
Unfortuantly Mediatek (mtk) refuse to release their souce code, so chances for custom roms are slim to none.
Try searching for some apks and sideload them if they are not available via the play store.
But seriously a single core 533Mhz CPU, it's gonna run like a three legged dog.
Problems with getting past dz09 smartwatch sos screen
I can't get past the screen where is says "input phone password" and at the bottom it has sos button . however, even when I press it with my SIM card and micro in it won't call and Idk the password. I woke up to the screen like this and I had been using it for almost a couple weeks.
Any roms for mtk6261?
jamil_khan72 said:
Any roms for mtk6261?
Click to expand...
Click to collapse
jamil_khan72 said:
Any roms for mtk6261?
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
Polis4 said:
https://drive.google.com/drive/folders/0B_hRh3DjuBoeNl9tM3ZRc0pDeTQ
Click to expand...
Click to collapse
Not even one of it is the factory default firmware for my DZ09. Its all crap.
Try this one.
://drive.google.com/drive/folders/0B8gP_joDg2g5QUdodExYS0RHU1k?usp=sharing
dont forget to add the
h t t p s at the begining.
Anyone know how to flash a better OS on it or at least make it functionable?
What the heck?
I bought this and the ad said it was something else... see the ad here on wish....
h t t p s://w w w .wish.com/c/58bc30e6643c967ad9c82c1e
I am of course requesting a refund, but since that takes a bit, I am curious about if there was anything that can be done with this device.... It has what looks like a wifi antenna behind the battery, but no options to connect in the settings, I do have some working knowledge of android devices( I have broken a few and had to fix, lol) but the OS on this is def not android, I looked it up and found it is most likely NeucleusOS or something like that.... My question is if someone has a cheap chinese knock-off that has android, can someone tell me how to change the drivers on this and build a new ROM/OS to replace what is in this?
I will bet that I will need to post this in a different forum or start a new one , plus post some pics and specs, and will do so..
Will anyone help me mod the heck out of this thing to see if we can do something with a $11 smartwatch that wasn't what was advertised?
Need a DZ09 MTK 6261 firmware that isn't crop????
Thanks everyone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hola amigos, tengo este problema de imagen, me ayudan???
I have the same problem here.
I have the negative colours after an update. I was wondering if I can sort of copy the software from my brother's watch which is the same like mine but he didn't updated his one. Can I?
I found this dz09 on dealextreme... Look the specs and shyte... Is this real? Cuz till now i totally trust deal extreme!
No, it's fake
Dylan Hameleers said:
I found this dz09 on dealextreme... Look the specs and shyte... Is this real? Cuz till now i totally trust deal extreme!
Click to expand...
Click to collapse
Mtk6261 can't support official nucleus is, much less android. The description is fake. You are better off buying a QW09, it's a Chinese smartwatch that runs android funOS
This watch is Bluetooth 3.0. All functions support android 4.3 and up smart phones. But for iphone, not it just support answer & call, phone book, music play, camera, clock, pedometer, phone anti-lost alert. """"""""""""""""""""""""""""Still not support SMS""""""""""""""""""""""""""""""""""""""""""" , "Radio", remote camera control, sleep monitoring, etc.
what that means , i cannot recive message on my dz09 ? (i am planing to buy this and pplease answear my question ..)thank u

MTK 2503 Thread, this thread is everything about this new chip

So, everyone is interested in the new chip, what is new with this chip?
It is said that this chip is specialized in sports/movement trajectory. Whether this watch supports movement trajectory? Is it built-in GPS? Since the old chip mtk2502 doesn't support GPS. How about the watchface? Does it support vxp face? And how about the battery life? 'Cause the Bluetooth connectivity drains battery life fast.
I have done some research on it.
As it is said that this chip is the upgrade of the mtk2502, so the first question come to my mind is that does it support Bluetooth calling.
The mtk2502 watch is known as tethering watch, the Bluetooth calling maybe the most useful feature, since the Android watch doesn't support this. So I searched the internet, google the mtk 2503, I found that mtk 2503 supports making/answering calls. It is the same as the mtk 2502 watch. That is a good news, right.
And the next question is the notifications. But since all the smartwatch supports notification function. So I pass it and go to next research.:laugh:
The movement trajectory, how does it work?
I found an image which may differ from real watch, but it indicates how the trajectory works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We don't know how it works but in the picture it does show the trace.
And the compass, Barometer features.
As a sport watch, I think these features are useful for outdoors. In this picture, you can find that there is nothing special with the barometer, just a common result like many other watches. But the compass, which is really interesting, in the right picture, it shows you how to use it. Turn over your wrist as the picture shows you.
The most impressive feature is the notifications on the watchface or as they said shortcuts.
In this picture, you can see that the call log and the notifications will add to the watchface, you can also click on the widget to show the entire info. :fingers-crossed: That's really a great upgrade for the MTK2502 watch. When I first saw this, I can't believe that mtk2503 watch could support this feature. This is what we looking for, Bluetooth calling and notifications on the watchface.:laugh:
Here is a video. The first mtk 2503 watch NO.1 G9. Look forward to its release.
I think you are confusing the SOC ( the combined processor and dsp/coprocessor package ) with what someone can make out of it
and what the operating system used for this can provide.
Most of what you describe is done by No.1 in the OS for their watch.
fzelle said:
I think you are confusing the SOC ( the combined processor and dsp/coprocessor package ) with what someone can make out of it
and what the operating system used for this can provide.
Most of what you describe is done by No.1 in the OS for their watch.
Click to expand...
Click to collapse
I'm not a coder/developer, so I'm just interested in the features the new chip can provide. And thanks for you explanation. :good:
About the OS, I'm also curious whether they will develop a new OS for it. That is something really cool.:laugh:
I fancied a nice cheap gps running watch so dived in and bought the TenFifteen F1 sports, Let's be honest it's not really a smartwatch along the lines of Apple watch or Samung galaxy android wear etc. It's more a mutli function watch that connects to your phone.
You can't install any apps from the play store or sync anything but FUNDO app which has no ability to transfer the gps files to something like Endomondo or Strava for record keeping.
I will say everything it has works well except for the keyboard it's too small and annoying, video recorder and so on no issues, it's glitch free just limited.
I'd honestly invest in something that has the play store for ease, as this is a right pain. honest reply for anyone searching.
LEMFO F1 watch faces
Hi everyone!
Recently I bought Lemfo F1 watch with MTK2503 CHIP.
It's a great piece of gadget for it's price.
So I wanted to load/install new watch face but without any success!
I tried with FunDo software and with Mediatek Smartdevice sortware. but all I get is error message "Install fail for internal error" all the time.
Do you have any idea what am I doing wrong?
Is there another sortware available to load VXP files?
Thank you very much in advance!
Sincerely,
Hrvoje
Smartwatch F1 mtk2503
This F1 smartwatch watch with mtk2503 processor seems to me that the rom is missing many things:
1. Can not be customized with watch face
2. Single slot for a microSD but can not be heard
*** the music by bluethoot since it does not reconceive any type
*** bluethoot headset can only be heard through the loudspeaker,
*** the same happens for calls.
3.When you are in a physical activity and want to adjust the
*** volume, the brightness, or see any other adjustment in the
*** watch you have to finish the activity to be able to do
*** any adjustment or see something else, the physical activity is not
*** it is working in the background.
4. When I finish the physical activity and synchronize the clock with
*** my smartphone shows me the trajectory about 5 or 6 km
*** farther from where it was made.
For these reasons I do not recommend it.
the other functions such as the compass, the heart rate sensor and the barometer seem to work well.

Need help with Smartwatch Lemfo DT78

Hi. I have got a smarwatch called Lemfo dt78 or DT No.1 DT78. I need the firmware or anything would help me to modify it to add languages or new skin fasces please. Thanks
Watch faces could be changed through wearfit app 2.0. is there any one who can modify the app and add watch faces.
DT78 Reverse Engineering
I was able to decode the BLE packets sent to and from the watch and connect it to an ESP32 board
I have the firmware but I don't know how to edit
Sorry, I'm a new user so i can't post links
github.com/fbiego/dt78
Are there any substitution sync applications instead of wearfit or wearfit2.0 for DT78 ?
Discover inside: https://fccid.io/2ASHI-DT78/Internal-Photos/09-DT78-IntPho-4522995
Battery Info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The wearfit2.0 app is too bad...and lack of a lot of basic notifications
DT78 App
coolpixs4 said:
Are there any substitution sync applications instead of wearfit or wearfit2.0 for DT78 ?
The wearfit2.0 app is too bad...and lack of a lot of basic notifications
Click to expand...
Click to collapse
I made an alternative app for android
available on my github
github.com/fbiego/DT78-App-Android
Fbiego said:
I made an alternative app for android
available on my github
github.com/fbiego/DT78-App-Android
Click to expand...
Click to collapse
Cool, thank you for your app...I like it.
I will try and give you feeb back. Hope it will available soon on play store, and it will defeat the wearfit and wearfit2.0 to be the best app for DT78/DT92.
However, it seems very difficult to auto establish the connection and reconnecting...after disconnected
EDIT:
So kool...Download DT78-App-Android v1.8
I like the simple look UI of your app, light weight but powerfull
However, it seems that the connection did not stable
Let's me use it for few days and feed back again.
V.1.8 connection unstable, please check...
Dear Fbiego, SAVE MY WATCH...please
Can you make a video to guide us how to update firmware of DT78 by OTA?
My watch's firmware version is v6.06. Which version of your watch?
I saw on youtube some watches have firmware version v8.02
Thanks!
EDIT:
Unluckily,
The version v8.05 is not compatible with my watch. Now, the screen is shifted upward and inversed screen. Anyone can help me, please?
I need v6.06 to back to the original. Huhuhu...
coolpixs4 said:
EDIT:
Unluckily,
The version v8.05 is not compatible with my watch. Now, the screen is shifted upward and inversed screen. Anyone can help me, please?
I need v6.06 to back to the original. Huhuhu...
Click to expand...
Click to collapse
I don't know how the firmware can be reverted. I got the firmware v8.05 in a zip file which also included 2 more .bin files
C23_804_capacitive_hynitron_cst816s_update.bin
C23_test_20200402_1819.bin
Not sure if these are firmware files
Which version is showed on your watch before and after ? Did you OTA without any troubles? And where do you got the firmware?
Thanks
In product specifications description advertisements it is said that OTA is supported but now they refuse to support.
It is fully death after flash this file C23_test_20200402_1819.bin
No longer turn it on
I'm looking for the solution of JTag jump
I got the firmware from russian forum 4pda.ru, I have not updated my firmware using the files as it requires an iPhone.
I currently have v8.02 on the watch
Already bought another, ...
I recommend that DO NOT OTA update firmware for this watch since it has nothing changes except that the version number code: v6.05, v6.06, v6.09, v8.02, v8.04, v8.05 ....even v12.01
All the Chinese smart band's firmware is not interchangeable ... even in the same model code.
Dear Fbiego,
Can you add this function to next update of DT78-App ?. It auto re-connect BLE device if the connection is broken (Wearfit2.0 can do this-for example if we move the watch far from the phone- the connection break, however then if the watch moves back again close to the phone the connection will auto re-connect)
https://stackoverflow.com/questions/34425662/android-auto-reconnect-ble-devices
https://stackoverflow.com/questions/44446587/automatic-connecting-to-a-ble-device-android
What this does is if our device is disconnected it will keep on trying to connect to it until a connection is established.
Code:
else if (newState == BluetoothProfile.STATE_DISCONNECTED) {
intentAction = ACTION_DISCONNECTED;
DeviceActivity.runOnUI(() -> {
sharedPreferences = PreferenceManager.getDefaultSharedPreferences(getApplicationContext());
String name_dev_1 = sharedPreferences.getString("Dev_1", null) ;
connectToDevice(name_dev_1);
disconnectGattServer();
});
}
}
Auto re-connect has been there, the reconnection is not immediate as it depends on the phone's scanning interval.
Please note that it may not work if Bluetooth is turned off intentionally or when the app stops due to error 133
Good to know that it's there. cheers
Fbiego said:
github.com/fbiego/DT78-App-Android
Click to expand...
Click to collapse
Great app, uses a lot less power compared to wearfit
Is there a way to send watchfaces to the watch?
And maybe add watchfaces?
Thanks
RobDC said:
Great app, uses a lot less power compared to wearfit
Is there a way to send watchfaces to the watch?
And maybe add watchfaces?
Thanks
Click to expand...
Click to collapse
Watch faces are hardcode in the firmware, recently there aren't have the solution to add more watch-face to DT78 (except the three additional option can be changed thru the sync-app)
These three watch-faces also cann't be modified thru the sync-app. Default it is available in the firmware, but not showed-up on the watch; It is only activated by calling the active code thru the sync-app
I dumped data from the SPI flash chip and found watch faces but the format is unknown.
Using RGB8, I get discolored images. 0xFF (white) gives bluish color on the watch
Check Github for more info
DT78 Smart Watch External Photos 08_DT78 ExtPho SHENZHEN XINKEYING DIGITALLIMITED
Smart Watch 08_DT78 ExtPho details for FCC ID 2ASHI-DT78 made by SHENZHEN XINKEYING DIGITAL CO.,LIMITED. Document Includes External Photos 08_DT78 ExtPho
fccid.io
FCC ID 2ASHI-DT78
fcc.report

Categories

Resources