Database Users

[Q] Latest CF-Auto-Root not working to root MH5

As described in Chainfire's goole+ post I tried to reroot my GS4 again after it upgraded to MH5 (DBT version).
And it failed to flash with Odin, this is the log from Odin, the result in Odin is a red square with FAIL as message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The cf autoroot I use is indeed with a timestamp of 05 september.
My phone gives these messages
ODIN MODE
Then a few white text lines:
Product name: GT-I9505
Current binary: Samsung official
System status: official
KNOX Kernel lock: 0x0
KNOX Warranty void: 0x0
CSB-Config-LSB: 0x30
Then a line in grey:
Write protection: enable
then 2 final lines in red:
start: [224,1440]
bar: [240,1440]
On the rest of the screen is still mentions Downloading, do not turn off target!!
Any idea on what is causing this problem ?

gerritcap said:
As described in Chainfire's goole+ post I tried to reroot my GS4 again after it upgraded to MH5 (DBT version).
And it failed to flash with Odin, this is the log from Odin, the result in Odin is a red square with FAIL as message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The cf autoroot I use is indeed with a timestamp of 05 september.
My phone gives these messages
ODIN MODE
Then a few white text lines:
Product name: GT-I9505
Current binary: Samsung official
System status: official
KNOX Kernel lock: 0x0
KNOX Warranty void: 0x0
CSB-Config-LSB: 0x30
Then a line in grey:
Write protection: enable
then 2 final lines in red:
start: [224,1440]
bar: [240,1440]
On the rest of the screen is still mentions Downloading, do not turn off target!!
Any idea on what is causing this problem ?
Click to expand...
Click to collapse
make sure you read other posts about rooting as you will void your warranty as Knox void warranty will show 0x1. so if you want to void your device flash at your own risk. hope this helps you out. if id have known i would void my warranty i would not have rooted my device

SPH-L720 - Trying To Return To Stock. aboot.mbn operation failed

I am trying to get back to stock firmware after using a custom 5.0.2 ROM. I've tried about everything I could find on forums/website and have come up empty handed. I have tried all the general stuff... USB Cables, USB Ports, Computers, etc. In the process of trying to flash back I tried going back to an older version of android which I guess was a bad idea, because that breaks the sound because of KNOX. ¯\_(ツ)_/¯
When trying to flash MJA with Odin this is what I get.
This is what I get on the phone screen.
ODIN MODE
PRODUCT NAME: SPH-L720
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMMC BURST MODE: enabled
START [224, 1448]
SW REV. CHECK FAIL : fused : 5, Binary : 4
This is what shows up in Odin's log window.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUEMJA_L720SPTEMJA_L720VPUEMJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

anyone? :\

Anyone?

http://forum.xda-developers.com/showthread.php?t=3025279

[Q] Unlocked Verizon S5 -> T-Mobile S5 Official Firmware

I have an unlocked Verizon S5 that I want to put the Official T-Mobile firmware on. I can use it on T-Mobile fine ( I have a T-Mobile SIM and set up the APN etc.... but I want to reflash it with the latest T-Mobile firmware. ( G900TUVU1DOB1 )
My problem is that using any version of Odin fails.
Verizon Info:
Model: SM-G900V
Android: 4.4.4
Baseband: G900VVRU1ANK2
Build Number: KTU84P
HW Version: G900V.05
Phone Screen Shows:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
SECURE CHECK FAIL : abort
Odin Log Reports:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900TUVU1DOB1_G900TTMB1DOB1_G900TUVU1DOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
How can I convert this to a T-Mobile S5?

Odin Problem (With A Stock Rom)

First Of All Sorry, My English Is A Little Bad, I Speak Spanish But I`m Doing The Best That I Can...
I Have An S5 (G900P) And I`m Trying To Install A Stock Rom (OA6) Via Odin But Appears An Error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_SPT_G900PVPU1BOA6_G900PSPT1BOA6_CL3859396_QB3804569_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And On My Cellphone
Odin Mode
Product Name: G900P
Current Binary: Custom
System Status: Custom
Reactivation Lock (KK): Off
Knox Warranty Void: 0x1 (4)
Qualcomm Secureboot: Enable (CSB)
Rp Swrev: s1, T3, R1, A3, P1
Secure Download: Enable
UDC Start
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
Does Anyone Knows How Can I Fix This Problem?

What firmware was it on originally?

justinxfan said:
What firmware was it on originally?
Click to expand...
Click to collapse
OK4, but i tried to install it and either i can`t

SM-A510FD 5.1.1 cant find rom for flash , Alternative please . ! URGENT

SM-A510FD XME SET .
Before this , I rooted my phone and installed TWRP .
BUT , the phone lag so much so i decided to fix by uninstalling unused APPS .
I end up with CUSTOM BINARY , FRP LOCKED . I cant access TWRP .
Right now im finding solution or Alternative for MALAYSIAN ROM . Please Im Running on 5.1.1

Some information at Downlod Mode .
SYSTEM STATUS: CUSTOM
FRP LOCK : ON
Secure Download : Enabled
Knox Warranty Void : 1 (0x0304)
RP SWREV: B:3 K:0 S:1
FLASHING ODIN - A510FXXS2BPH1_A510FDOJP2BPG1_A510FDXXU2BPF8_HOME.tar.md5
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

SliperHR_ said:
SYSTEM STATUS: CUSTOM
FRP LOCK : ON
Secure Download : Enabled
Knox Warranty Void : 1 (0x0304)
RP SWREV: B:3 K:0 S:1
FLASHING ODIN - A510FXXS2BPH1_A510FDOJP2BPG1_A510FDXXU2BPF8_HOME.tar.md5
Enter CS for MD5..
Binary Check MD5.. Do not unplug the cable..
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
All threads completed. (succeed 0 / failed 0)
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
According to the info, you have a revision 3 firmware installed and you are attempting to flash a revision 2 firmware.
The device probably won't allow you to downgrade the bootloader, but you may be able to flash just the AP part below.
That should get you back up and running.
Just some advice: NEVER disable OEM unlock. Leave it enabled at ALL times.
http://forum.xda-developers.com/samsung-a-series/help/a510fd-official-firmware-4-files-one-t3358130
You can also use kies or Smartswitch and use the firmware upgrade option by entering your device model and serial to download the correct firmware.