I didn't notice this at first since I either charge my phone at my PC or via an old Samsung mains charger, but my cousin pointed it out since he has the same phone as me. Has anyone looked at the mains adapter (UK) that was included with the 6039y? The earth (top) pin of the plug is over a centimetre lower than it should be, making it impossible to actually plug it in to a mains socket.
Can anyone else in the UK confirm this with their adapters?
Not sure if you're joking or not but replying anyway...
Pull the earth pin upwards it should slide up to the correct position. It can slide down to be more compact when transporting the charger around.
Sent from my 6039Y using Tapatalk
He's trolling around!
Nice one though.
Not trolling, already tried sliding it up but it wont budge, I must have a faulty one. I figured if it wasn't going to move then it wasn't going to pop out, I didn't want to guess at trying to pry it out in case that's not how to plug worked and I ended up busting the thing but I'll try and see if I can get it to move, if it breaks, then oh well.
Ok, manage to get it to pop up, stuck a screwdriver in between all of the pins and forced it out with some leverage.
Related
I got my xda 2 a while back, about 2-3 months, never noticed this before, but, it seems when its in the cradle, and the cradle is plugged into both USB and the DC adapter, the whole phone becomes live, i've had a few (minor) shocks off it, seems there must be some earth leakage somewhere. Anyone had any issues like this? I think its also causing the XDA to hard reset when being dropped into the cradle, its done it a few times, but its gotten really bad latley. anyone any ideas? I dident get it from o2 so i dont know what they'd be like on the RMA, i dont mind paying for a repair if necessary. or will it be easier to buy a new cradle and adapter?
Cheers
Joel
Probably easier and cheaper to buy a new cradle. Strange though, I thought the cradle case was plastic (mine's at home, so can't check). What happens if you use just the dc plug with the push-in convertor? Sure you haven't got a bit of scarf stuck in the xda's pins that's connecting up to the case when you push it home?
rgds,
Alex.
yeh, thets what im thinking, it seems ok if the cradle isnt plugged into usb, i'll try it on a different computer, i have had problems with my laptop and shorting before :/
Well I'd definitely advise against using it in the laptop anymore until you track it down. If current is being passed through the wrong channels, you're running the risk of frying your device. I'm sure you know that
Having just said don't use it on that laptop anymore, how about trying different USB ports to see if you have a port or a mobo problem? Shorts can be very difficult to track down, good luck.
rgds,
Alex.
It should charge without the power if you have usb plugged in, or so I have been told. If you ring O2 service centre on 08081003427 they will ask you how long you have had it, I was not asked who supplied it, I told them I had it less than 3 months and they sent me a cardboard carton to put it in and a bag to send it back, then fixed it and sent it back.
Well its started being really weird now, it seems to randomly hard reset, and it also comes up with backup battery low, but on the battery screen it says is full, does the backup battery recharge itself or is it none rechargeable?
I just posted on the accessories forum about my experience with the Brodit active holder that I purchased. Mounted it in my car, and plugged the brodit charger in. Fuse in car charger went bang (not literally). Now I know it's not my power adapter in the car, as I've been using another JasJar charger and GPS charger for ages, so I went to Halfords and bought some replacement fuses. Tried them in the charger. Every one died too instantly.
I assumed the charger must be faulty, and arranged to send the holder back to Clove to replace it. It wasn't until I plugged my JasJar into the normal charger last night that I discovered it was no longer charging at all. I tried unplugging and replugging. I tried using the USB cable in my pc. Nothing works. Even the other car charger won't charge it any more.
I'm guessing I now have to send my JasJar to HTC for repairs and be without it for a couple of weeks. I'm not too happy about it though, and thought I would ask here first if this has happened to anyone else and if there might be a way to get it charging again without having to send it away.
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Carnivor said:
i had a similar problem, i went to france with a charger that had a changable head, with pins for the different countries on click in plates, and on the top was a usb socket.
i took a standard usb to mini usb cable with me figuring this is a usb charger like the one that came with my phone but no, i couldnt get it charging, then after 12 hrs of it refusing, it eventually kicked back in, i sussed you had to use it like plugging it into a pc, ie, it turn it off, wait, then plug it in. bingo it started charging again.
its working like activesync, right pain, shoulda just taken me charger and a mains convrter
sorry it doesent really help but its poss related
Click to expand...
Click to collapse
similar problem. but i change the port miniusb. 30 dolares in mexico.
no problem, is easy. and now is working ok.
Well I've sent it in for repairs now. Couldn't get the thing to charge.
this forum is amazing...if there is an information available, you can bet it you can find it here...:
thanks carnivor: I had the same problem, but just was not smart enough to get the idea to shut it off and then on...with your help i solved the problem...i still don't get it, why it did charge with the original charger or with the usb cable from the pc and not with the generic usb charger and that same cable....and actually: it depended on the ROM installed: with the qtek rom it did not matter, with the t-mobile it did..
anyway: now it works. thanks!
I notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it. Im not going to hack into the charger cable just yet to find that out.
Intresting about the rom versions changing the fact if you can have device on before sync or not. Im not going to reflash now with an update around the corner im just going to wait for that.
notice that the power lead is thinner than a usb lead so there may be less wires inside, ie 2 + ground instead of 4 + ground, the lack of TX and RX connections may well be what causes it.
Click to expand...
Click to collapse
yes, but interestingly it also doesn't work with the same cable that syncs and charges from the pc, when this cable is connected to the lighter or the generic USB charger...so the mess starts already in the charger.
but bottomline: as long as there's a workaround...
Hi, there are lots of posts about damaged USB ports. I was wondering does anyone saw or uses any cap for USB. It should be something like rubber SD cap. Just plug it into USB and you can reset the phone in complete darkness . And it could be attached to leash loop with little thread not to lose it while on charge/sync. That would also prevent dust from accumulating inside USB port. Anyway I couldn't find anything like that. Maybe some DIY ...
I was thinking the same thing cause i am having to replace my tilt due to breaking the usb port with the stylus. I would love any ideas on how to do a cover.
bump..
sounds like something that should of came with the phone..
This would be a great idea since I have to realign my usb port every once in a while. The only way I can sync with my computer is by using the HTC USB Headphones adapter that came with my 8525. AT$T said that they would not exchange my Tilt for a new one because bent pins are not covered under their warranty due to "personal damange". It's really weird that I can't use my Seidio Cradle to sync with my computer anymore since it has the same proprietary USB jack. It will only charge the unit and if I move the Tilt while plugged in to the cradle, the connection is not always consistant.
healingtouch84 said:
I was thinking the same thing cause i am having to replace my tilt due to breaking the usb port with the stylus. I would love any ideas on how to do a cover.
Click to expand...
Click to collapse
Haha. I thought I was the only one. Went to do a soft reset, wasn't looking, and stabbed the USB by mistake. Didn't notice it wouldn't charge until the next day. Fortunately, I was able to bend the pin (GENTLY) back into place and it works again. BIG sigh of relief
I've search the forum first before I posted this message, but no post that gives me the slightest answer to this problem
I lend out my tmo Wing to my gf because her phone broke and I had G1 for awhile already. Apparently it's too much to handle for her so I bought her a cheap nokia prepaid in order to get my wing back.
I'm trying to back up her pics and ringtones from the phone, but I noticed it won't charge. The amber light won't turn. I double check again and I noticed the miniUSB port is super loose. I tried wiggling it, putting the cable halfway, taking out the battery, etc. Nothing work.
What should I do? Does anyone have experience this problem before?
Check the contacts on the female usb port. If they are corroded, which could be the case if not properly cared for, try searching Google for a way to clean them.
The contacts could be skewed at an angle, like my old Kaiser. I used a pair of tweezers to manually move the contacts back to their original position.
Try switching to another USB cable. My phones will only charge with a cable that has a very heavy-duty end on it. Normal USB cables won't cut it, I had to use one that came with a removable hard drive.
That's all I have for now. Hope it helps!
My port is screwed too. I got this charger off of ebay and love it.
cgi.ebay.com/Battery-Charger-for-T-Mobile-MDA-Vario-III-HTC-TyTN-II_W0QQitemZ350298289224QQcmdZViewItemQQptZBatteries_Chargers?hash=item518f67b448
I have two batteries, so one is always charged. I like it so much more than a traditional charger. HTH
hey guys, need some help here
so my phone is not charging, i tried the USB to PC, does not work neither does the wall charger, I do not get a orange led notification either. The phone would boot up for a second then turn off.
any suggestions?
I have this issue with my aftermarket battery from china, the battery is so dead that the phone doesnt even really know its there. It just happend to me yesterday. ill put up a fix tomorrow because i have my kid this weekend.
slickerxcuh said:
hey guys, need some help here
so my phone is not charging, i tried the USB to PC, does not work neither does the wall charger, I do not get a orange led notification either. The phone would boot up for a second then turn off.
any suggestions?
Click to expand...
Click to collapse
lucky for you, its the ebay battery for me its my oem battery. going to try to swap out another oem battery/charger and see if its my battery.
had the same issue, i noticed on mine that the battery pins on the phone tend to bend easily to prevent a good connection from the battery. phone would power on but wouldn't charge either.
is it the pins? i need some pictures or a video tutorial on this fix lol i have no idea what everyone is talking about, the pins look fine to me. im pretty sure that its my cable now since it didnt charge a blackberry phone either...
Damn how can this phone be so hi tech but made with th most CHEAPEST materials!
i bought a new micro usb cable, and its charging now...
slickerxcuh said:
i bought a new micro usb cable, and its charging now...
Click to expand...
Click to collapse
I bought one off of amazon and it would totally freak my phone out....no joke...it was just a wall charger no usb...now I only use the usb like the one that came with the phone and that is i.t
When you get a new phone, you should always condition the battery by letting it run completely down a few times in the beginning. When I was doing this with my phone when I first got it, after a complete drain it wouldn't charge. All i had to do was pull the battery and put it back in. Then it started charging fine. Not sure if this helps...
Also I wouldn't say these phone use cheap materials because people are not careful and bend the pins. I've removed my battery several times and the pins are perfect... If the pins aren't flexible, you wouldn't be able to get the battery in. In order to be flexible, they have to be soft. Pay attention when you are removing and replacing your battery.
You ended up figuring it out but I figured it would be good to point out that sometimes the connections on the battery/phone get dirty or pretty much any battery where it connects to the electronic.
What I usually do first when I have problems with any of my electronics turning on/charging is I take a cotton swab and dip it in rubbing alcohol. Shake it off cuz there will be alot of alcohol on there just so its not dripping and rub the connections then flip the cotton swap around then rub them again with the dry side. This doesnt work all the time but works enough for me to mention it. Static electricity will attract dirt and grime. Used to happen semi often on my touch pro since I used to have it in my pocket when I worked on a golf course.
Anyways just my 2 cents.