Database Users

Bricked G4 Plus , need help

To start with, i've bought this from ebay and don't know backstory
Model XT1644
stuck in fastboot mode, can't go to recovery , when i choose recovery it's just hangs up.
It doesn't even charge, while plugged goes to fastboot , once i remove usb it turns off .
first it was only blinking white led on charger, now it goes to fastboot immediately .... while connected to pc it says battery ok charging in green , but once i connect it to charger it's written in red "battery low (charging)"
tried flashing with rsdlite and i'm stuck with Fail on gpt partition, neither fastboot fashing helps
tried few roms , with no luck
bootloader is locked and i can't unlock it either ,because oem unlock isn't active from system and can't do it either because can't boot to os
Any suggestions?

@jkjambo what was build number / android version before brick ? And which build are you flashing ?
To eliminate GPT error, try to skip flashing of GPT and BOOTLOADER.

____Mdd said:
@jkjambo what was build number / android version before brick ? And which build are you flashing ?
To eliminate GPT error, try to skip flashing of GPT and BOOTLOADER.
Click to expand...
Click to collapse
As i said in main thread, i have no clue about that
This is all i know about this phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

jkjambo said:
As i said in main thread, i have no clue about that
This is all i know about this phone
Click to expand...
Click to collapse
It shows Baseband is unknown,
And bootloader is of date 13-04-2016 (one of marshmallow ROM)
If you are installing Marshmallow ROM by RDSlite and bootloader got downgraded to it, it is not good to flash.
BTW which version of ROM are you flashing ?
If it is built of marshmallow Then better to download Nougat ROM.

jkjambo said:
As i said in main thread, i have no clue about that
This is all i know about this phone
Click to expand...
Click to collapse
In addition to ____Mdd's post, a fastboot Nougat stock ROM that's the latest one we have (June 2017) is here https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 You could try flashing that.
Hmm, that device doesn't look healthy though, if you boot into bootloader, connect your device to your computer and type 'fastboot getvar all' without quotes in adb, can you post the output here please? On first glance, looks like the modem partition is not flashed properly or corrupted, alongside the downgraded bootloader.

____Mdd said:
It shows Baseband is unknown,
And bootloader is of date 13-04-2016 (one of marshmallow ROM)
If you are installing Marshmallow ROM by RDSlite and bootloader got downgraded to it, it is not good to flash.
BTW which version of ROM are you flashing ?
If it is built of marshmallow Then better to download Nougat ROM.
Click to expand...
Click to collapse
XT1644_ATHENE_RETUS_MPJ24.139-48_cid50_subsidy-DEFAULT_regulatory-XT1644_CFC.xml
I was trying this... Can't really see firmware version, but i think i downloaded newest avaliable on filefactory
echo92 said:
In addition to ____Mdd's post, a fastboot Nougat stock ROM that's the latest one we have (June 2017) is here https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 You could try flashing that.
Hmm, that device doesn't look healthy though, if you boot into bootloader, connect your device to your computer and type 'fastboot getvar all' without quotes in adb, can you post the output here please? On first glance, looks like the modem partition is not flashed properly or corrupted, alongside the downgraded bootloader.
Click to expand...
Click to collapse
Will try that in 10-20 minutes
I know it doesn't look healthy, not charging, no baseband, shuts off when it's not connected, says battery OK when it's on usb , but battery low , when it's on charger... definetely something wrong with it
here you go:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8952-B0.0E(*)
(bootloader) product: athene_16mp
(bootloader) board: athene_16mp
(bootloader) secure: yes
(bootloader) hwrev: P2A
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8952
(bootloader) serialno: ZY223VT2RZ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) uid: 540F230100000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: no
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) imei: 354113071315330
(bootloader) meid:
(bootloader) date: 01-15-2017
(bootloader) sku: XT1644
(bootloader) battid: SNN5970A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon May 16 16:52:24 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/athene_f/athene_f:7.0/NPJ
(bootloader) ro.build.fingerprint[1]: S25.93-14-4/4:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.25.201.4.athene.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.BR.1.3.6-01710-8976.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.10.84-gb9596e1 (hudsoncm
(bootloader) kernel.version[1]: @ilclbld31) (gcc version 4.8 (GCC) ) #1
(bootloader) kernel.version[2]: SMP PREEMPT Fri Mar 3 02:04:02 CST 2017
(bootloader) sbl1.git: git=MBM-NG-VB0.0E-0-g83950b7
(bootloader) rpm.git: git=1dc910e
(bootloader) tz.git: git=9fa1804
(bootloader) hyp.git: git=9fa1804
(bootloader) keymaster.git: git=9fa1804
(bootloader) cmnlib.git: git=9fa1804
(bootloader) aboot.git: git=MBM-NG-VB0.0E-0-g4986429
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retus
all: listed above
finished. total time: 0.173s
C:\adb>

Seems like i need new battery...
Flashed system succesfully with rsdlite , but after reboot(in rsdlite) phone still stuck with blinking white led notification . Same with flashing fastboot commands.. Seems like someone tried to remove battery before
EDIT :
Still no baseband in fastboot

jkjambo said:
phone still stuck with blinking white led notification
Click to expand...
Click to collapse
You either have ditched the phone or fixed it already because I'm coming here so late, but this state you describe is a hard-brick. You need the blankflash file. Ask @echo92 to guide you through!

MK+2017 said:
You either have ditched the phone or fixed it already because I'm coming here so late, but this state you describe is a hard-brick. You need the blankflash file. Ask @echo92 to guide you through!
Click to expand...
Click to collapse
Thanks for reply , but as i thought it was just a battery problem. changed battery and it booted with no problem

[HARDBRIK] Moto G4 Play XT1603 - blankflash error

I am Brazilian, I have a Moto G4 Play XT160, after updating the android the phone died, recognizes in the PC like Qualcomm HS-USB QDLoader 9008 (COM3), but when executing the blankflash it gives error, already I executed blankflash 1, 2 and 3, Does anyone know something to help me ??
Prints:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

same problem here, Pleaaassee ! Help.
XT1604
Thanks

bebellm said:
same problem here, Pleaaassee ! Help.
XT1604
Thanks
Click to expand...
Click to collapse
Both of you guys bootloader was unlocked?

Salik Iqbal said:
Both of you guys bootloader was unlocked?
Click to expand...
Click to collapse
my phone yes

vinifv said:
my phone yes
Click to expand...
Click to collapse
Ok will share new blankflash shortly, try with it.

Salik Iqbal said:
Both of you guys bootloader was unlocked?
Click to expand...
Click to collapse
Hello, my phone also, everytime it's during an update, I think when trying to go from 6 to 7.
I have several phones, and 3 of my G4 are in this state, blackscreen
Thank you very much Salik Iqbal if you can help !

Hello Salik Iqbal,
Is there some possibility for me to do something ? or really too complicated ? (I guess the last one, but we never know)
Thank you

vinifv said:
my phone yes
Click to expand...
Click to collapse
bebellm said:
Hello Salik Iqbal,
Is there some possibility for me to do something ? or really too complicated ? (I guess the last one, but we never know)
Thank you
Click to expand...
Click to collapse
Sorry was really busy in work, i have completed blankflash for harpia using latest built, will upload late tonight after testing.. hopefully you will get into fastboot mode by that..

Thank you very much Salik !

vinifv said:
my phone yes
Click to expand...
Click to collapse
bebellm said:
Hello, my phone also, everytime it's during an update, I think when trying to go from 6 to 7.
I have several phones, and 3 of my G4 are in this state, blackscreen
Thank you very much Salik Iqbal if you can help !
Click to expand...
Click to collapse
bebellm said:
Thank you very much Salik !
Click to expand...
Click to collapse
vinifv said:
I am Brazilian, I have a Moto G4 Play XT160, after updating the android the phone died, recognizes in the PC like Qualcomm HS-USB QDLoader 9008 (COM3), but when executing the blankflash it gives error, already I executed blankflash 1, 2 and 3, Does anyone know something to help me ??
Prints:
Click to expand...
Click to collapse
here you go! it will surely put phone into fastboot ..

Salik Iqbal said:
i have completed blankflash for harpia using latest built, will upload late tonight after testing..
Click to expand...
Click to collapse
Hi, can you tell me which build is it? MPIS (Marshmellow) or NPIS (Nougat) ?!?!

ALI12 said:
Hi, can you tell me which build is it? MPIS (Marshmellow) or NPIS (Nougat) ?!?!
Click to expand...
Click to collapse
Its 7.1.1 nougat..

Salik Iqbal said:
Its 7.1.1 nougat..
Click to expand...
Click to collapse
Cool, have you tested this on any model? If so, please write model and carrier on which this worked.

ALI12 said:
Cool, have you tested this on any model? If so, please write model and carrier on which this worked.
Click to expand...
Click to collapse
1609/7/1 it will work mostly on all versions, all you need is 7.1.1 latest stock rom, bootloader version feb 02 2018...

Hi Salik,
Thank you very much for your work. effectively, it starts in bootloader ! What a great news first all ! Thanks
After normally I do some command line and I restore everything but everything I get : (bootloader) Permission denied
So I try to unlock the bootloader fastboot oem get_unlock_data / and I get : (bootloader) Failed to get unlock data, please try again!
Any Ideas, Thank you very much.

bebellm said:
Hi Salik,
Thank you very much for your work. effectively, it starts in bootloader ! What a great news first all ! Thanks
After normally I do some command line and I restore everything but everything I get : (bootloader) Permission denied
So I try to unlock the bootloader fastboot oem get_unlock_data / and I get : (bootloader) Failed to get unlock data, please try again!
Any Ideas, Thank you very much.
Click to expand...
Click to collapse
Hi, paste here logs from "fastboot getvar all" to check what is the problem
perhaps, the guy Salik made singleimage.bin from VZW bootloader or something else, we'll see, but first need logs

Hello Ali12
Thanks for the anwser, here is what I get :
Thank you
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8916-81.12(*)
(bootloader) product: harpia
(bootloader) board: harpia
(bootloader) secure: yes
(bootloader) hwrev: 0x81B0
(bootloader) radio: 0x5
(bootloader) emmc: 16GB SKHynix REV=07 PRV=08 TYPE=57
(bootloader) ram: 2GB Hynix S8 SDRAM DIE=8Gb
(bootloader) cpu: MSM8916
(bootloader) serialno: -----------
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0xDEAD
(bootloader) uid: ---------------------------
(bootloader) unlocked: Not supported
(bootloader) securestate: Not supported
(bootloader) iswarrantyvoid: Not supported
(bootloader) mot_sst: 8
(bootloader) max-download-size: 268435456
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) hyp.git: hyp.git
(bootloader) aboot.git: git=MBM-NG-V81.12-0-gf9417da
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.191s

Blankflash Moto G4 Play
vinifv said:
I am Brazilian, I have a Moto G4 Play XT160, after updating the android the phone died, recognizes in the PC like Qualcomm HS-USB QDLoader 9008 (COM3), but when executing the blankflash it gives error, already I executed blankflash 1, 2 and 3, Does anyone know something to help me ??
Prints:
Click to expand...
Click to collapse
mega. nz/#!2gg2gaaD!Mu1JuDGYF-dMyMU-fTpFWX_FDPaZvVeM7qrod5LS2MM
remove the space, say thank you

Thanks, do you know how to kill back the phone ... !! I mean when the phone is dead I can launch blankflash, when it's not I can't he says, waiting for device ! Thanks

ALI12 said:
Hi, can you tell me which build is it? MPIS (Marshmellow) or NPIS (Nougat) ?!?!
Click to expand...
Click to collapse
bebellm said:
Thanks, do you know how to kill back the phone ... !! I mean when the phone is dead I can launch blankflash, when it's not I can't he says, waiting for device ! Thanks
Click to expand...
Click to collapse
Download latest rom for your device then:
Fastboot flash partition gpt.bin
Fastboot flash bootloader bootloader.img
Fastboot reboot
It will unlock ur bootloader and so on.. happy killing or use it again

(SOLVED) START UP FAILED - Failed to load kernel after dirty flash LOS 20180420

[SOLUTION!]
I was able to boot into fastboot mode, so I flashed the Motorola official firmware (DON'T FLASH BOOTLOADER.IMG AND GPT if your device has the newer version of firmware installed.)
Thanks to @gyarados025 @kkrupaa!
==================================================================================
After I dirty flashed the unofficial LineageOS 20180420 by @jwchen119 from the previous 20180317, I received some errors (photos below) while installing and reboot...
And now my phone can't boot up anymore.
(NOTE: I am still able to boot into TWRP recovery!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
mount: failed to mount /dev/block/bootdevice/by-name/system at /system: Device or resource busy
detected filesystem ext4 for /dev/block/bootdevice/by-name/modem
Extracting modem firmware
Firmware extracted
unmount of /system failed (-1): Device or resource busy
Error: failed to load kernel!
Fastboot Reason: Fall-through from normal boot mode
And that's when I reboot, and I will be auto booted to the bootloader with startup error (I still can switch to recovery mode though, via volume button) . Anyone able to help please?
Model: XT1580 64GB
Bootloader: A8.63
TWRP Version: 3.2.1-0
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8994-A8.63
(bootloader) product: kinzie
(bootloader) board: kinzie
(bootloader) secure: yes
(bootloader) hwrev: 0x8301
(bootloader) radio: 0x2
(bootloader) emmc: 64GB Toshiba REV=07 PRV=00 TYPE=57 PNM=064G38
(bootloader) ram[0]: 3072MB Samsung S16 SDRAM DIE=6Gb M5=x1 M6=x3 M7=x0
(bootloader) ram[1]: M8=x4
(bootloader) cpu: MSM8994
(bootloader) serialno:
(bootloader) cid: 0x0007
(bootloader) channelid: 0x51
(bootloader) uid: ACB5FD011B000000000000000000
(bootloader) unlocked: yes
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 09-01-2016
(bootloader) sku: XT1580
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Dec 3 3:27:18 UTC 2017"
(bootloader) ro.build.fingerprint[0]: motorola/kinzie_reteu/kinzie:7.0/N
(bootloader) ro.build.fingerprint[1]: PKS25.200-12-9/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.25.221.9.kinzie_rete
(bootloader) ro.build.version.full[1]: u.reteu.en.EU
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-ge1ecd45 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 201501
(bootloader) kernel.version[2]: 23 (prerelease) (GCC) ) #1 SMP PREEMPT F
(bootloader) kernel.version[3]: ri Oct 27 00:30:05 CDT 2017
(bootloader) sbl1.git: git=MBM-NG-VA8.63-0-g4e1b53f
(bootloader) rpm.git: git=fa49dab
(bootloader) tz.git: git=0265775-dirty
(bootloader) hyp.git: git=0265775-dirty
(bootloader) sdi.git: git=5acf8a8-dirty
(bootloader) pmic.git: git=MBM-NG-VA8.63-0-g4e1b53f
(bootloader) aboot.git: git=MBM-NG-VA8.63-0-g4be2eae
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retapac
all: listed above

Looks like the issue with Boot.img bcoz kernel is stored in boot.img.
Since you are able to use fastboot commands , try flashing the stock firmware.
Dont flash Bootloader.img & GPT if your device is on the latest version of firmware than the available.bcoz downgrading bootloader had bricked devices with Official OTA on some moto devices
Try using the RSDlite i.e the Software Repair assistant
Hope this helps

Blur_Version.25.221.9.kinzie_reteu.reteu.en.EU.zip
I dumped my moto X force into wash water and after drying it would not boot.
Does anyone have the original motorola Blur_Version.25.221.9.kinzie_reteu.reteu.en.EU.zip
Since my phone does not boot to GUI I cannot change the developer options and that version seems to be the only one I could install on the exising bootloader.
Recovery shows:
motorola/kinzie_reteu/kinzie:7.0/NPKS25.200-12-9/6:user/release-keys

h_jaeschke said:
I dumped my moto X force into wash water and after drying it would not boot.
Does anyone have the original motorola Blur_Version.25.221.9.kinzie_reteu.reteu.en.EU.zip
Since my phone does not boot to GUI I cannot change the developer options and that version seems to be the only one I could install on the exising bootloader.
Recovery shows:
motorola/kinzie_reteu/kinzie:7.0/NPKS25.200-12-9/6:user/release-keys
Click to expand...
Click to collapse
https://forum.xda-developers.com/droid-turbo-2/general/stock-firmware-t3730332
If the cid dosent match , then try skipping modem firmware but i have flashed this on my whole device with cid 0x0032 but everything is fine

Blur_Version.25.221.9.kinzie_reteu.reteu.en.EU
gyarados025 said:
https://forum.xda-developers.com/droid-turbo-2/general/stock-firmware-t3730332
If the cid dosent match , then try skipping modem firmware but i have flashed this on my whole device with cid 0x0032 but everything is fine
Click to expand...
Click to collapse
Thank you for the answer, however I only and defeinitely need the OTA, Blur_Version.25.221.9.kinzie_reteu.reteu.en.EU
Unfortunately I never did switch on the USB Debugging in the Developer->Options before my device was killed. So I am stuck with the installed bootloader...

Cannot unlock OEM option (Moto G6 Plus)

Hello everyone, i recently purchased Moto G6 Plus from store, and i can not unlock the "oem" option on developer settings, i need help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i have the same problem.
MOTO G6 PLUS

I had NO PROBLEM Unlocking my Bootloader
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
JefersonMatias said:
Hello everyone, i recently purchased Moto G6 Plus from store, and i can not unlock the "oem" option on developer settings, i need help
Click to expand...
Click to collapse
Did you purchase from a carrier store?

I also have the same problem on my Moto G6, i just can't enable OEM Unlocking. I don't have bought from a carrier store, no bloatware are installed.
My device is Moto G6 XT1925-3
I booted on fastboot mode and it says that my Software Status is Modified (?) i'm on Stock Rom, didn't change anything.
---------- Post added 10th June 2018 at 12:38 AM ---------- Previous post was 9th June 2018 at 11:59 PM ----------
Good news!
I was able to unlock after flashing Moto G6 Stock Firmware from our buddy: https://forum.xda-developers.com/moto-g6/development/stock-firmware-moto-g6-t3792292

Arthricia said:
I also have the same problem on my Moto G6, i just can't enable OEM Unlocking. I don't have bought from a carrier store, no bloatware are installed.
My device is Moto G6 XT1925-3
I booted on fastboot mode and it says that my Software Status is Modified (?) i'm on Stock Rom, didn't change anything.
---------- Post added 10th June 2018 at 12:38 AM ---------- Previous post was 9th June 2018 at 11:59 PM ----------
Good news!
I was able to unlock after flashing Moto G6 Stock Firmware from our buddy: https://forum.xda-developers.com/moto-g6/development/stock-firmware-moto-g6-t3792292
Click to expand...
Click to collapse
Did that fix your problem???

AndroidDevices said:
Did that fix your problem???
Click to expand...
Click to collapse
Yes, flashing the Firmware uploaded by Lohan solved my problem!

Unlocked

Wheather we can flash without unlock the bootloader

[email protected] said:
Wheather we can flash without unlock the bootloader
Click to expand...
Click to collapse
Why are you bringing up a month's old thread? If this is a question, then no. You can't.
Sent from my Moto G6 Plus using Tapatalk

Xplorer4x4 said:
Why are you bringing up a month's old thread? If this is a question, then no. You can't.
Click to expand...
Click to collapse
? Actually I'm have a question if you're good as pro then help me .... Them private message me

[email protected] said:
[emoji848] Actually I'm have a question if you're good as pro then help me .... Them private message me
Click to expand...
Click to collapse
You got an answer. Private messages are for private matters. Post questions on the forum so that others can benefit from the information.
Sent from my Moto G6 Plus using Tapatalk

Xplorer4x4 said:
You got an answer. Private messages are for private matters. Post questions on the forum so that others can benefit from the information.
Click to expand...
Click to collapse
Ohk dude my problem is I can't unlock my bootloader I got an error code with the code validation failure with status 7
You have any solution for that ?

First, give post the output of: fastboot getvar all
Make sure to use code tags. Several things to try here: https://forums.lenovo.com/t5/MOTORO...Validation-Failure-with-Status-7/td-p/3616544
If you try using google it is much faster then waiting and waiting for someone to reply.

Xplorer4x4 said:
First, give post the output of: fastboot getvar all
Make sure to use code tags. Several things to try here: https://forums.lenovo.com/t5/MOTORO...Validation-Failure-with-Status-7/td-p/3616544
If you try using google it is much faster then waiting and waiting for someone to reply.
Click to expand...
Click to collapse
Ohk dude but now I can't send you the getvar all but I will tell you few things I unlocked my bootloader previously and I relocked it with security version may i think so ... And I try to update my security patch Verison to July and I have updated to July when I try to unlock the bootloader now I can't unlock it this my problem I'm not having any problem with SDK

[email protected] said:
Ohk dude but now I can't send you the getvar all but I will tell you few things I unlocked my bootloader previously and I relocked it with security version may i think so ... And I try to update my security patch Verison to July and I have updated to July when I try to unlock the bootloader now I can't unlock it this my problem I'm not having any problem with SDK
Click to expand...
Click to collapse
Why can't you send getvar all? If your phone boots to bootloader you can get it.
As for the SDK, fastboot is part of the SDK so it could be fastboot related and therefore SDK related.
If you're not going to actually try to follow instructions and try things or provide the necessary info, I guess you don't need my help after all.
/ignore list activated!

Xplorer4x4 said:
Why can't you send getvar all? If your phone boots to bootloader you can get it.
As for the SDK, fastboot is part of the SDK so it could be fastboot related and therefore SDK related.
If you're not going to actually try to follow instructions and try things or provide the necessary info, I guess you don't need my help after all.
/ignore list activated!
Click to expand...
Click to collapse
Hey I need your help man I'm just out of station I can't get any lap or PC here so I will send you when I get pls don't mistake me ? I need your help bruh

Xplorer4x4 said:
Why can't you send getvar all? If your phone boots to bootloader you can get it.
As for the SDK, fastboot is part of the SDK so it could be fastboot related and therefore SDK related.
If you're not going to actually try to follow instructions and try things or provide the necessary info, I guess you don't need my help after all.
/ignore list activated!
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-sdm450-C3.0B
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 5
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RH64AB RV=08 PV=05 FV=0000000000000005
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) serialno: ZF62222PBS
(bootloader) cid: 0x0000
(bootloader) channelid: 0x00
(bootloader) uid: 25E958BF00000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351866090732637
(bootloader) meid:
(bootloader) date: 06-02-2018
(bootloader) sku: XT1925-13
(bootloader) carrier_sku: XT1925-13
(bootloader) battid: SB18C18509
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Jan 14 0:42:31 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/ali/ali:8.0.0/OPS27.82-87
(bootloader) ro.build.fingerprint[1]: /108:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.231.108.ali.retai
(bootloader) ro.build.version.full[1]: l.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M450_05.10.10.57R ALI_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g3ded56c (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Mon Jul 16 15:07:10 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC3.0B-0-g6a96fd0
(bootloader) rpm.git: git=MBM-NG-VC3.04-0-g02798db
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4
(bootloader) cmnlib.git: git=5fefee4
(bootloader) cmnlib64.git: git=5fefee4
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VC3.0B-0-gebdb6cd
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: unknown
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 1.731s
here is it help me

[Help Thread][Moto G6 Plus ](2018) Ask Any Question, Noob Friendly

[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE]​[SIZE=+2]Specific to[/SIZE]
Moto G6 Plus
XT1926 4GB RAM + 64GB, Brazil.
XT1926 4GB RAM + 64GB, Europe
XT1926 6GB RAM + 64GB, Europe
XT1926................................................, Latin America, Mexico
XT1926 4GB RAM + 64GB, USA, Various (International)
​
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button , in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters...
...
...
...​To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.
If you have ROM related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!
Supporters: If you want to be put on or off the list, just make a request here in the thread!
Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
FAQs for Device Thread link
Index for Device Thread Link
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
​

I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
FAQs
UnLocking the Bootloader
[Moto G6 Plus] 1: Preparing to Unlock Bootloader by Xplorer4x4
ReLocking the Bootloader
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
[Moto G6 Plus]Modding Guide Index- Restore Stock,Root/Magisk,Custom Roms,GSI by Xplorer4x4
ULTIMATE GUIDE] How To Unbrick your Moto G6 Plus by luiz_neto
Custom Roms/Recovery/Root/
[Moto G6 Plus] 3: How to install Root (aka Magisk) by Xplorer4x4
Firmware
https://mirrors.lolinet.com/firmware/moto/
[Index]Motorola Flashing Utilities, Firmware, and more
News, specs
https://www.gsmarena.com/motorola_moto_g6_plus-9001.php
https://www.phonemore.com/models/motorola/moto-g6-plus/

Guys I have a very specific question. How do I record calls in apps like messenger / Viber / WhatsApp? Especially the first one? Android Pie NO root.
I know Cube ACR can do it on Android 10, could I do it on Pie Moto G6 Plus if I root?
Thank u guys

flashing locked
Hi,
I am attempting to get lineage on my moto g6 plus.
I adhered to the rules of installing adb and fastboot, and it seems to be okay with my device ("fastboot devices" gives me my Serial number and "device".)
However, any other command (like fastboot oem device-info) gives me a FAILED (remote: 'unknown command').
fastboot version is 30.0.3-6597393
my fastboot mode screen on my device says "flashing_locked"
After I enter
Code:
fastboot flashing unlock_critical
it says
"OKAY".
but nothing changes on the phone display.
Do you have any idea or recommendation on where to look up that issue?

unwell_evaluator said:
Hi,
I am attempting to get lineage on my moto g6 plus.
I adhered to the rules of installing adb and fastboot, and it seems to be okay with my device ("fastboot devices" gives me my Serial number and "device".)
However, any other command (like fastboot oem device-info) gives me a FAILED (remote: 'unknown command').
fastboot version is 30.0.3-6597393
my fastboot mode screen on my device says "flashing_locked"
After I enter
Code:
fastboot flashing unlock_critical
it says
"OKAY".
but nothing changes on the phone display.
Do you have any idea or recommendation on where to look up that issue?
Click to expand...
Click to collapse
You must unlock bootloader through moto site.
See unlocking bootloader link in
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk

Microphone problems
My XT1926-6 4GB+64GB Latin America (Argentina) seems to have a hardware problem with the mic (doesn't work for calls, voice messages, google assistant, etc.).
For recording video from the camera app the audio work fine, hence the camera mic works, but not the "normal/calling" one.
It doesn't work either in videocalls (zoom, whatsapp, meet, etc.) nor in normal calls even in loudspeaker mode.
I searched all over the internet and found that is a relatively common ¿hardware? issue in the Lenovo forums (i cant post the link because i am a new user in XDA)
Is there any way to manually force via software (app) or modifying some cfg file of android so the phone uses the camera mic as the default internal mic for calls and other apps?
Thanks in advance!

I flashed the latest lineage os 17.1. It is detecting the sim card but I am unable to place calls. When I try to make a call, it asks me to turn off the airplane mode but the airplane mode is not turned on. The network signal is also not displayed. It is not a sim problem since it worked before flashing. Please help me.

sugarkicks69 said:
I flashed the latest lineage os 17.1. It is detecting the sim card but I am unable to place calls. When I try to make a call, it asks me to turn off the airplane mode but the airplane mode is not turned on. The network signal is also not displayed. It is not a sim problem since it worked before flashing. Please help me.
Click to expand...
Click to collapse
Try flashing these from stock firmware.
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn

Hi! I have a doubt. I want to flash statix os and the download repos do not list the zips as device specific like pixel experiance or lineage os. I know the code name of moto g6 plus is evert I just wanted to confirm if I can flash the ROM if it's under evert. I don't know if evert is a device specific name I just need confirmation. Sorry I'm new to this.

sugarkicks69 said:
Hi! I have a doubt. I want to flash statix os and the download repos do not list the zips as device specific like pixel experiance or lineage os. I know the code name of moto g6 plus is evert I just wanted to confirm if I can flash the ROM if it's under evert. I don't know if evert is a device specific name I just need confirmation. Sorry I'm new to this.
Click to expand...
Click to collapse
If the rom is for evert it should be fine.

Hey! I flashed the Havoc OS v3.8 evert Unofficial ROM on my moto g6 plus. I am unable to call from my SIM or use mobile data. The SIM works for calling on Pixel Experience OS, but not data. I want to keep using Havoc OS v3.8 Unofficial ROM and I need help to fix the SIM problem. Please help me.

sugarkicks69 said:
Hey! I flashed the Havoc OS v3.8 evert Unofficial ROM on my moto g6 plus. I am unable to call from my SIM or use mobile data. The SIM works for calling on Pixel Experience OS, but not data. I want to keep using Havoc OS v3.8 Unofficial ROM and I need help to fix the SIM problem. Please help me.
Click to expand...
Click to collapse
Download the stock firmware for your device.
Flash these
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
If you are not sure which firmware to use
Post getvar all results here
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com

sd_shadow said:
Download the stock firmware for your device.
Flash these
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
If you are not sure which firmware to use
Post getvar all results here
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
this is the output of the command "fastboot getvar all"
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-83f0397-191109
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: India
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG 3H6CMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 6GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY322M9NNT
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: D2693B06
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 355548090398297
(bootloader) meid:
(bootloader) date: 05-23-2018
(bootloader) sku: XT1926-9
(bootloader) carrier_sku: XT1926-9
(bootloader) battid: SB18C20873
(bootloader) battery-voltage: 4022
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert/evert:9/PPWS29.116-
(bootloader) ro.build.fingerprint[1]: 16-15/8deca:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.19.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: M660_29.59.01.96R EVERT_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gb9ce108 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 201
(bootloader) kernel.version[2]: 50123 (prerelease) (GCC) ) #1 SMP PREEMP
(bootloader) kernel.version[3]: T Sat Nov 9 22:23:35 CST 2019
(bootloader) git:abl: MBM-3.0-evert_retail-83f0397-191109
(bootloader) git:xbl: MBM-3.0-evert_retail-6d901a6-191109
(bootloader) git:pmic: MBM-3.0-evert_retail-6d901a6-191109
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-191109
(bootloader) git:tz: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:hyp: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:devcfg: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:cmnlib: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:keymaster: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:prov: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:storsec: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retin
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.049s

sugarkicks69 said:
this is the output of the command "fastboot getvar all"
Code:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-evert_retail-83f0397-191109
(bootloader) product: evert
(bootloader) board: evert
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: India
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG 3H6CMB RV=08 PV=05 FV=0000000000000005
(bootloader) ufs: N/A
(bootloader) ram: 6GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM630 1.0 (6)
(bootloader) serialno: ZY322M9NNT
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: D2693B06
(bootloader) securestate: flashing_unlocked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 355548090398297
(bootloader) meid:
(bootloader) date: 05-23-2018
(bootloader) sku: XT1926-9
(bootloader) carrier_sku: XT1926-9
(bootloader) battid: SB18C20873
(bootloader) battery-voltage: 4022
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/evert/evert:9/PPWS29.116-
(bootloader) ro.build.fingerprint[1]: 16-15/8deca:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.29.361.19.evert.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.7.2.r1-05300-sdm660.0
(bootloader) version-baseband: M660_29.59.01.96R EVERT_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 4.4.153-perf-gb9ce108 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 201
(bootloader) kernel.version[2]: 50123 (prerelease) (GCC) ) #1 SMP PREEMP
(bootloader) kernel.version[3]: T Sat Nov 9 22:23:35 CST 2019
(bootloader) git:abl: MBM-3.0-evert_retail-83f0397-191109
(bootloader) git:xbl: MBM-3.0-evert_retail-6d901a6-191109
(bootloader) git:pmic: MBM-3.0-evert_retail-6d901a6-191109
(bootloader) git:rpm: MBM-3.0-evert_retail-718b013-191109
(bootloader) git:tz: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:hyp: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:devcfg: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:cmnlib: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:cmnlib64: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:keymaster: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:prov: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) git:storsec: MBM-3.0-evert_retail-6c7dc9f-191109
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: retin
(bootloader) current-slot: b
(bootloader) running-bl-slot: _b/_b
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: yes
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 6
all: listed above
Finished. Total time: 0.049s
Click to expand...
Click to collapse
I'm not seeing your exact software version, there are a few newer versions
This looks like the closest to yours
(PPWS29.116-16-15/8)
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
XT1926-9_EVERT_RETIN_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-XT1926-9-WUHAN_CFC.xml.zip

sd_shadow said:
I'm not seeing your exact software version, there are a few newer versions
This looks like the closest to yours
(PPWS29.116-16-15/8)
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
XT1926-9_EVERT_RETIN_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-XT1926-9-WUHAN_CFC.xml.zip
Click to expand...
Click to collapse
Just to confirm, what I should do now is download and extract this zip, navigate to the zip folder, and run the said commands. Am I right?

sugarkicks69 said:
Just to confirm, what I should do now is download and extract this zip, navigate to the zip folder, and run the said commands. Am I right?
Click to expand...
Click to collapse
correct

sd_shadow said:
Download the stock firmware for your device.
Flash these
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
If you are not sure which firmware to use
Post getvar all results here
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I tried this. Says "No service" near the signal indicator and "Turn off airplane mode" when I attempt to make a call. What do I do now?

sugarkicks69 said:
I tried this. Says "No service" near the signal indicator and "Turn off airplane mode" when I attempt to make a call. What do I do now?
Click to expand...
Click to collapse
There must be something else missing in the rom. Could be APN setting?
If there is a thread for the rom, try asking in that thread if anyone had a similar issue.
Meanwhile, you may want to reflash stock so it works.

sd_shadow said:
There must be something else missing in the room. Could be APN setting?
If there is a thread for the rom, try asking in that thread if anyone had a similar issue.
Meanwhile, you may want to reflash stock so it works.
Click to expand...
Click to collapse
I don't know if its related but I had the exact same problem with lineage os 17.1 too.

sd_shadow said:
There must be something else missing in the rom. Could be APN setting?
If there is a thread for the rom, try asking in that thread if anyone had a similar issue.
Meanwhile, you may want to reflash stock so it works.
Click to expand...
Click to collapse
I reflashed the stock ROM. I am still having the problem. What do I do? Please help me.