CM13 is available: http://www.cmxlog.com/13/klteduos/#
Seems to be quite stable for its early state.
Known issue is that most apps can only read from external SD, but not write because of changes in storage management of Marshmallow.
There are also voices saying LTE & 3G are not working.
Please test and report
Not working LTE and 3G , clean install....
Yeah same here, no LTE 3G. Clean install
Bad news 1st: LTE not working seems to be a known bug, too: http://forum.xda-developers.com/nexus-4/help/cm13-switching-to-wdcma-t3280353
Good news after: It seems to be already merged since yesterday : http://review.cyanogenmod.org/#/c/125897/
I have already flashed today's nightly and maybe, later on, I can sort out if it has been already fixed...
I hava had no problem with LTE/3G since day1.
I only get either G, E, H or H+ connection, but not yet 3G or LTE...
I had no data with 31st december nightly, came back to cm12.1.
I look forward this cm13 is stable !
LTE in Germany works (T-Mobile).
Really? I am German, too, but only G, E, H or H+. Provider is Vodafone.
Really! Perhaps another band?
No problems here. But using external SD is a problem. Any solutions?
No, not yet. Marshmallow has completely new memory management...
Mi Band no works on Bluetooth.
My xiaomi Mi Band no longer works with the cm-13.0-20160112-NIGHTLY-klteduos. Just can not be detected by ROM. Someone with the same problem?
nickaaai said:
Yeah same here, no LTE 3G. Clean install
Click to expand...
Click to collapse
You have to switch to other sim and turn that sim to 2G ( u may not turned to LTE before but it automatically turned into LTE) then switch back to data sim the ntry to change it to LTE or 3G..
shakthivsb said:
You have to switch to other sim and turn that sim to 2G ( u may not turned to LTE before but it automatically turned into LTE) then switch back to data sim the ntry to change it to LTE or 3G..
Click to expand...
Click to collapse
Thank you very much!!!
thiaguinhox said:
My xiaomi Mi Band no longer works with the cm-13.0-20160112-NIGHTLY-klteduos. Just can not be detected by ROM. Someone with the same problem?
Click to expand...
Click to collapse
Possible the same Problem in my reason. The mifit APP detect the miband but can Connect with it because the miband think its still connected with an other phone.
Next update i unpair first.
Gruß
Hello everyone,
I just flashed cm13 and found 2 bugs so far.
1: no setting for disabling either sim cards.
2: no setting for not pressing ok after inserting pin to unlock phone.
Anysolutions yet??
No. CM 13 has not been officially launched yet. It is still under development and proceeds step by step.
I have updated to stock 6.0.1 and updated Bootloader and Modem accordingly.
But from then on, I can't install CM13!
it gets in boot loop.
Has anybody been able to install CM13 after updating bootloader to 6.0.1?
@pc boy: it's not working atm, see https://forum.cyanogenmod.org/topic/125006-cm-13-wont-work-after-official-mm-upgrade/
Related
From couple of days I am facing a bit unique problem that whenever I enable my data into #GSM it shows h+ and runs 3g and after a while it auto changes into E from h+ and within a minute data network gets disabled.. And again it auto enable data and same process starts: h+ to E, E to h+ and disable / enable.. Network data gets disable enable automatically...
Maybe a provider problem
Hello and thank you for using Q/A,
did you try a factory rest. It can be a provider problem.
Kind regards
Trafalgar Square
How you recently update your phone's firmware?
If so, Its not really an unique problem, since I am experiencing the same.
With an OTA update to I9505XXUPOL1, my data connection was not working at all.
To fix my data connection problem, I have flashed I9505XXUHPA1, which was stable connection, but only E (gsm) connection, it has disable LTE.
Sources within this forum say that I9505VJUHOK1 (south america firmware) works properly, I have not tested it yet. If some can confirm please let me or us know.
I download my firmware from the sammobile website
Trafalgar Square said:
Hello and thank you for using Q/A,
did you try a factory rest. It can be a provider problem.
Kind regards
Trafalgar Square
Click to expand...
Click to collapse
Hehe... I think it occured after couple of master reset?
*IIhan87 I flashed 4.4.2 firmware long time ago and the problem occured now... My baseband is XXUGNH6. And it doesn't have lollipop firmware too if it had I would have tried latest firmware to solve the data network issue: (
Hi all,
I have bought a Redmi 3s Prime last week. One problem I am facing is that if you turn on data services, if it is idling, speed drops to E and even G. The only way to get it back is to manually change network preference type from settings. What could be the problem? Is it a hardware issue?
Android version 6.0.1
MIUI version 8.2.5.0 (MALMIDL)
Please help.
win32.tr0jan said:
Hi all,
I have bought a Redmi 3s Prime last week. One problem I am facing is that if you turn on data services, if it is idling, speed drops to E and even G. The only way to get it back is to manually change network preference type from settings. What could be the problem? Is it a hardware issue?
Android version 6.0.1
MIUI version 8.2.5.0 (MALMIDL)
Please help.
Click to expand...
Click to collapse
This is a known issue.
Is you have root, try to install Networl Signal Guru, then disable Edge (2g) frequencies.
Some people solve it using a second sim...
Second SIM even if dummy one will solve this problem, I'm using this option and managing my 32GB wisely as you will lose your sdcard slot. Nothing terrible for me as I need it the 2nd SIM anyways.
slds,
Your problem is well known, but still no solution from xiaomi.
Best i can suggest is that u check which frequencies your carrier uses.
If u got root, install Network Signal Guru.
Try disabling one of used WCDMA frequencies and then force 3G. if it doesnt work, try to disable the other frequencies
IT WORKED FOR ME D
Jure_aleksic said:
Your problem is well known, but still no solution from xiaomi.
Best i can suggest is that u check which frequencies your carrier uses.
If u got root, install Network Signal Guru.
Try disabling one of used WCDMA frequencies and then force 3G. if it doesnt work, try to disable the other frequencies
IT WORKED FOR ME D
Click to expand...
Click to collapse
Also, I have installed today fedosis LOS build, and now finally I got stable LTE. Must be something in kernel...
gustavolang said:
Also, I have installed today fedosis LOS build, and now finally I got stable LTE. Must be something in kernel...
Click to expand...
Click to collapse
I had LOS installed, and the problem this guy said was also there
Its a hardware fault if u ask me
Jure_aleksic said:
I had LOS installed, and the problem this guy said was also there
Its a hardware fault if u ask me
Click to expand...
Click to collapse
I had that problem too... Until I install today's build.
gustavolang said:
I had that problem too... Until I install today's build.
Click to expand...
Click to collapse
Could be that xiaomi updated their modem files
Where can I get the latest build? When I go from updater, it says there are no updates and mine is the latest version...
win32.tr0jan said:
Where can I get the latest build? When I go from updater, it says there are no updates and mine is the latest version...
Click to expand...
Click to collapse
Switch to global dev rom you will get the latest one. Miui 9 v 7.9.8
Better you make clean install with MiFlashTool via EDL.
Search fastboot rom here.
en.miui.com/a-234.html
Me also same problem
Magisk error 1 ko solve kaise kare 3s prime method
Ple
Help me Sir
Okay, I should of just stayed here to say first...
I decided to flash cyanogen on my s4 due to bad battery life on the default sprint. I am using Tello as my provider and it was fine on stock firmware, however, I installed this galaxy-s4-sprint-cm14-cyanogenmod-14-nougat-rom from cyanogenmods dot org
Right after installing, as I got in, it said sim card not detected. I have no cellular signal
Is there anyway to fix this?
Please help and thanks!
redbob1985 said:
Okay, I should of just stayed here to say first...
I decided to flash cyanogen on my s4 due to bad battery life on the default sprint. I am using Tello as my provider and it was fine on stock firmware, however, I installed this galaxy-s4-sprint-cm14-cyanogenmod-14-nougat-rom from cyanogenmods dot org
Right after installing, as I got in, it said sim card not detected. I have no cellular signal
Is there anyway to fix this?
Please help and thanks!
Click to expand...
Click to collapse
I just went to octos and it works fine with tello. Based on CM 13.0 and android 7.1.1, nice os and officially supported, which is why it works
i have the same issue but the sim wont detetct on my device only when i go on (4g) lte.....go to settings ...more...mobile network type...and select 3g
Hi,
So I have only 3G connection on my Note 3, can't connect to LTE. I think it broke down a while ago when I was updating MagmaNX to UX10. ROM was working fine so I decided I don't want to break it down further and decided to go on with just 3G. But recently I decided to switch back to RR N by vidwhal, becuase Magma became laggy so I started playing with different modems and the result was either bootloop on older modems or just 3G connection on later ones. Currently I'm on CP_N9005XXUGBPG1 but I tried almost all of modems and BL from this thread https://forum.xda-developers.com/galaxy-note-3/general/bootloader-baseband-bl-cp-samsung-t3582504
It's apparently not ROM dependant as it's broken on both MagmaNX and RR N. Any other ideas on how to fix it?
Oh, and GPS also became pretty bad, it takes a few minutes to get the first fix.
If it matters I live in Poland.
Usual reply wipe phone flash stock rom .
Wouldn't connect to LTE on stock as well. Finally I found out it was not my phone's fault but carriers. Other SIM card in my phone has LTE and my SIM in another does not.
Hey guys, I have finally arrived at a proper result after a long time.
Airtel supports Volte in all areas except J&k. , as mentioned on their website: https://www.airtel.in/volte/
Note: First u need to have an Airtel 4g sim along with a 4g/3g data plan.
So the steps to activate Volte is simple :
1. Go to the airtel Volte website given above.
2. Check for compatible devices
Note: You will be needing any one of the compatible devices listed by Airtel on their page.
3. Now you have to put your sim in the device [ compatible one ] and they reset the network settings of the device.
4. Now restart the phone and wait for some time.
5. After doing so you would get a link from Airtel.
Note: Something similar to this - Please open the following link to get manual instructions for service settings.
http://10.89.22.101:9080/SADM/Manualgrp=Auto+Device+Detection&rcId=4&msisdn=%2B91<airtelmobilenumber>&dev=Xiaomi+RedmiNote5Pro
6. After clicking on the link, you have to restart the device.
7. Airtel Volte will be enabled, now you can put it back in your Zuk Z2 and Volte is enabled.
And for those who want to know what rom I am running on,
Rom: Jaguar version January 10
Gapps: Mind the gapps
magisk: Installed
Hit the thanks button if I helped you.:good:
It's working guys.
I used galaxy j7 which is supported device. I waited for 15 mins and tried rebooting even i didn't get volte or sms mentioned above, Then I called customer care and asked about volte ,then they told your device is volte supported and keep using your device to get volte after 2 mins i got volte in j7 then i switched to z2 plus , volte is working now in z2
akshay pro said:
http://10.89.22.101:9080/SADM/Manualgrp=Auto+Device+Detection&rcId=4&msisdn=%2B91<airtelmobilenumber>&dev=Xiaomi+RedmiNote5Pro
Click to expand...
Click to collapse
Link not working for me.
mGforCe said:
Link not working for me.
Click to expand...
Click to collapse
Bro this is the link, ,that I got , u would also get a same one once you follow the above steps
I ve got VoLTE icon when I updated to aex 6.3, however when I make calls network falls back to 3G, which isnt supposed to happen. Anyone else?
Bro i Have airtel sim my z2 plus didnt compatible with volte services as this the airtel customer care employee says im on zui 2.0 help me out
Also i have very poor signal in my phone already changed various basband versions but nothing happened help me plz.
It worked for me by following the process ???????
Cyberwarrior17007 said:
Bro i Have airtel sim my z2 plus didnt compatible with volte services as this the airtel customer care employee says im on zui 2.0 help me out
Also i have very poor signal in my phone already changed various basband versions but nothing happened help me plz.
Click to expand...
Click to collapse
ok to solve your issue, all you gotta do is follow this website: https://forum.xda-developers.com/showthread.php?t=3695877 get the latest version of Indian stock rom guess (zui 2.5) and install that using qfil.
now set it up and enable volte on the device. Then follow the steps given above. Happy Flashing :good:
No matter what I try, wait for similar message as given in #1 or call customer care for volte settings they are just providing me with Instructions on how to enable VoLTE in settings.
I'm not able to get beyond that point i.e., not able to receive the link to enable VoLTE on my sim card.
I didn't got any link but kept my sim in poco f1 for 4hrs it's worked for me....
Now i can able to use volte in Z2 Plus....
anirudh.siddula said:
No matter what I try, wait for similar message as given in #1 or call customer care for volte settings they are just providing me with Instructions on how to enable VoLTE in settings.
I'm not able to get beyond that point i.e., not able to receive the link to enable VoLTE on my sim card.
Click to expand...
Click to collapse
which device are you using as an alternative to enable the volte on your sim?
LAKSHMI SAINATH said:
I didn't got any link but kept my sim in poco f1 for 4hrs it's worked for me....
Now i can able to use volte in Z2 Plus....
Click to expand...
Click to collapse
Sorry for the inconvenience u had to face during the process, but happy u got volte
Hi,
Can any one help me.
Airtel volte is working for me in first sim tray.
Problem is it is working only for 2 mins after that is directly going to 2 g network, then again i need to reboot/ aeroplane mod/ changing network to 3g and then to 4g to get volte. almost all roms are having issue for me. Cana may one please provide solution for thia
skishoreraju said:
Hi,
Can any one help me.
Airtel volte is working for me in first sim tray.
Problem is it is working only for 2 mins after that is directly going to 2 g network, then again i need to reboot/ aeroplane mod/ changing network to 3g and then to 4g to get volte. almost all roms are having issue for me. Cana may one please provide solution for thia
Click to expand...
Click to collapse
Type *#*#4636#*#* in dialpad
Select phone info then in network type select 4g or lte only
JV Spartacus said:
Type *#*#4636#*#* in dialpad
Select phone info then in network type select 4g or lte only
Click to expand...
Click to collapse
Hi, thanks for your help.
It is working, but after changing to LTE, I unable to call to anyone / unable to receive calls.
Please help me
skishoreraju said:
Hi, thanks for your help.
It is working, but after changing to LTE, I unable to call to anyone / unable to receive calls.
Please help me
Click to expand...
Click to collapse
You are not getting volte that's y
Put sim in sim1 slot
JV Spartacus said:
You are not getting volte that's y
Put sim in sim1 slot
Click to expand...
Click to collapse
Sim is slot1 only.
I have followed what you have said, I have kept LTE only in phone info after that I am getting volte with out any issue.
Now issue is after changing phone info to LTE I am unable call / receive calls
skishoreraju said:
Sim is slot1 only.
I have followed what you have said, I have kept LTE only in phone info after that I am getting volte with out any issue.
Now issue is after changing phone info to LTE I am unable call / receive calls
Click to expand...
Click to collapse
Volte is lost
You will have to qfil stock if volte is lost
JV Spartacus said:
Volte is lost
You will have to qfil stock if volte is lost
Click to expand...
Click to collapse
I think you did not understand my problem,
OK no problem, thanks for your suggestion