Hello people,
To start off my device is already rooted and I have tried to flash super su 2.46 zip, but every time I do this the device will not boot.
However I have managed to flash the zip fine before without any issues on CM13,
What would you advise?
Thank you
HatchetEgg said:
Hello people,
To start off my device is already rooted and I have tried to flash super su 2.46 zip, but every time I do this the device will not boot.
However I have managed to flash the zip fine before without any issues on CM13,
What would you advise?
Thank you
Click to expand...
Click to collapse
Hello supersu news >> http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
version v2.66 for 6.0
Related
Hello
I just installed Lollipop 5.1 and my problem is that when installing SuperSU and asks me to update the binary, I click on Normal and I get this error:
Error in installation!
Reboot and try again, please.
What do I do?
Then why don't you use recovery installation?
And second, almost every 5.1 is already pre-rooted ...
Have you changed SU too a system app? Then it's often normal that you must install over Recovery or Odin.
qtwrk said:
Then why don't you use recovery installation?
And second, almost every 5.1 is already pre-rooted ...
Click to expand...
Click to collapse
I executed Root Checker and tells me not root.
What i should do? Installing then SuperSU from recoovery or Odin?
Thanks.
egea92 said:
I executed Root Checker and tells me not root.
What i should do? Installing then SuperSU from recoovery or Odin?
Thanks.
Click to expand...
Click to collapse
what rom you on ?
Have you asked over on the SuperSU thread? You're likely to get your answers there, once you provide Chainfire with a logcat.
Whether it is solved , I installed SuperSU with recovery , and it works properly.
Thanks!! :laugh: :good:
Is there any separate supersu versions for moto x play marshmallow i tried the supersu beta 2.52 And 2.56 but the phone is stuck in bootloop need help to root marshmallow moto x play
you need supersu 2.62
Worked perfect
That worked perfect mate thanks for the quick reply cheers :good::good:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
iZak17 said:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
Click to expand...
Click to collapse
I Use TWRP 2.7.8v2 when you prompted to install TWRP SuperSU not install and reboot
2.62 SuperSU the latest I think there are two
2.61 and 2.62 are working. Not clear with 2.60
Versions before 2.52 doesn't work
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Sounds like you installed a version prior to 2.61. You can transfer it to your phone when in TWRP. Try flashing it and rebooting, if that doesn't work you'll have to do a full restore from your backup and reboot, then flash Supersu 2.62.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Install firmware and use supersu 2.62
Enviado desde mi XT1563 mediante Tapatalk
flopezm said:
i use twrp 2.7.8v2 when you prompted to install twrp supersu not install and reboot
2.62 supersu the latest i think there are two
Click to expand...
Click to collapse
did u find the reason ???
flopezm said:
Install firmware and use supersu 2.62
Click to expand...
Click to collapse
Could you elaborate on this? Install which firmware?
Dekztyr said:
Could you elaborate on this? Install which firmware?
Click to expand...
Click to collapse
flash the twrp flashable stock 6.0 and then flash su.62
bablu048 said:
twrp flashable stock 6.0
Click to expand...
Click to collapse
Great, thanks! Any idea where I might find that?
Dekztyr said:
Great, thanks! Any idea where I might find that?
Click to expand...
Click to collapse
Here forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
Just search in the General section you'll be amazed by what you can find.
Is there a working version for 6.0.1? I've been trying to root for hours and nothing. Every time I install SuperSU (I've tried 2.65 and 2.74) it will softbrick my phone, making it stuck at the bootloader warning message, forcing me to flash install stock rom and go through the fresh install every time.
Any one plz help me .i have installed Twrp 3.0.2 and after installing supersu 2.65 i have lost my base band data .i have installed the stock rom and tried to install supersu 2.62 and 2.46 but no use again i have lost my base band data.plzz help me to root my device with out losing base band data??
After reading some threads someone said you can install and use all the latest su versions by installing it systemless. You must open the terminal command in twrp recovery and type this:
echo "SYSTEMLESS=true" >> /data/.supersu
After this you should be able to flash all newest/latest versions.
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
kos25k said:
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
Click to expand...
Click to collapse
Im now running su 2.71 after installing it systemless. Before I tried this my ROM stucked in a bootloop.
so with 2.71 is ok?
mmmm I read some weird things such as loose root when f.reset http://m.supersuroot.com/
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
flash it and don't wipe the data partition after it
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
Flash BETA-SuperSU-v2.67-20160121175247.zip in recovery.
Download:
https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
darkerm said:
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
Click to expand...
Click to collapse
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
ashwin.kj said:
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
Click to expand...
Click to collapse
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
darkerm said:
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
Click to expand...
Click to collapse
Loosing root is expected. Next time you upgrade your ROM, you can try using FireFlash or something similar to try and retain root. But regarding bootloop I am not sure. I usually flash the ROM and gapps and let it boot. If everything is working, then only I flash superSU. Which version are you flashing anyways?
I'm on a B09, bootloader unlocked and rooted with SuperSU 2.65 A2017G.
Except from the 2.65 version, is there another one working for the A2017G?
I want to get Xposed and if I do understand I need SuperSU 2.75 or above to get Xposed to work in systemless.
If there isn't another version could you guys help to get Xposed working on my phone?
That would be much appreciated.
EDIT: Well I'm dumb, I assumed Oki's guide only worked on the A2017U variant. Sorry guys :/
If you have the official version of TWRP you should be able to install the latest version of SuperSU.
Yeah I figured it out with the help of Oki's guide.
Thanks for the answer!
I'm having a problem where many apps do not get root unless I manually open SuperSU, which means that most root apps are not working properly because they can't work automatically. Is there another version of SuperSU or TWRP that I can flash to solve this problem?
I'm on A2017U B29 stock, SuperSU 2.79 flashed from TWRP 3.0.2-2
nuserame said:
I'm having a problem where many apps do not get root unless I manually open SuperSU, which means that most root apps are not working properly because they can't work automatically. Is there another version of SuperSU or TWRP that I can flash to solve this problem?
I'm on A2017U B29 stock, SuperSU 2.79 flashed from TWRP 3.0.2-2
Click to expand...
Click to collapse
Did you make sure to disable system write protection? Boot into TWRP, open up the terminal emulator, and issue the command: reboot disemmcwp
I'm having a similar problem while flashing superuser. The error happens after the "patching sepolicy" line runs. The error prevents SuperSU from being installed at all. Any suggestions?
You need to flash twrp 3.0.3 or above and flash SuperSU 2.79
Latest SuperSU Causes Endless Loops on the Axon 7
Literally, every time I install the latest version of SuperSU on my axon I get an endless bootloop. These are SuperSU files I get directly from chainfire's website. There must be something im missing, or maybe im downloading the wrong version? Im not sure i was hoping to get some help. I just tried installing: SR3-SuperSU-v2.79-SR3-20170114223742.
>> Can anyone point me in the right direction of the latest SuperSU that works with the Axon 7 that doesnt bootloop it.
I remember that the Pixel phones had SuperSUs that were made for it. I am wondering does the same thing apply here?
I have installed everything right on my phone to the T. Everything was brand new stock.
Kinanizer said:
If you have the official version of TWRP you should be able to install the latest version of SuperSU.
Click to expand...
Click to collapse
so i recently got the pixel, had the moto x for about a year and decided to see what was going on with the rooting scene with this device. turns out that someone came along and created a simple solution to rooting and installing twrp for this device. I was happy. TWRP works just fine. But upon flashing SuperSU and rebooting from that i'm now stuck on the M logo permanently it seems. Yes i can reboot back into recovery and fastboot mode. But i can't seem to get past the M logo and all i've done was flash TWRP and SuperSU any idea about what's going on?
You need to flash as systemless root. Recent versions of SuperSU installs it as system root by default on this phone for some reason.
The SuperSU zip from my thread does it: https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Spasticdroid said:
You need to flash as systemless root. Recent versions of SuperSU installs it as system root by default on this phone for some reason.
The SuperSU zip from my thread does it: https://forum.xda-developers.com/mo...t/rom-marshmallow-6-0-september-2016-t3536120
Click to expand...
Click to collapse
awesome thanks!!!! <3 now i just need to find a rom to play around with :3
silvernirvash said:
awesome thanks!!!! <3 now i just need to find a rom to play around with :3
Click to expand...
Click to collapse
No offense, but why are you bothering to root if you are just going to flash a ROM?
Also, there is nothing wrong with the latest version of SuperSU, you just need to do a manual systemless flash by creating the file /data/.supersu with the contents "SYSTEMLESS=true" and it will work perfectly.
acejavelin said:
Also, there is nothing wrong with the latest version of SuperSU, you just need to do a manual systemless flash by creating the file /data/.supersu with the contents "SYSTEMLESS=true" and it will work perfectly.
Click to expand...
Click to collapse
That's exactly what my zip does. I've only put it together to make the process much simpler, and I love automating stuff when it's possible.
SuperSU inside is unmodified. Updater-script copies a file named "systemless" from the zip which has "SYSTEMLESS=true" in it to /data, renames it to ".supersu", then proceeds flashing SuperSU.
Hello all,
I need some help!I have a Moto X Pure Edition XT 1575 I just unlocked bootloader and then intalled TWRP 3.1.1 and then installed SuperSU 2.79 and now no Sim is detected. What did I do wrong?
Thanks!
Unroot & clean with supersu app. It should restore boot image.
/You can also restore boot, system, wipe data in twrp/
Reboot & check.
If ok try rooting with supersu 2.82 or magisk 14. @kaleend101