I flashed EMOTION_Lolipop rom, and it worked fine, but I wanted to try something else so then I flashed MIUI v5. After that the phone wouldn't boot, it was booting for more than 10 minutes and nothing happened, also the screen was upside down. I wiped everything, flashed it again, but still the same. Then I tried MIUI v6 rom, now it keeps restarting as soon as it turns on. I can get to CWM recovery, I wiped everything, flashed back EMOTION rom, but when I turn it on it still has MIUI v6 logo, and it still keeps restarting. Screen is upside down even in recovery.
Please help.
Okay, I flashed back MIUI v5, and now it doesn't restart but it still wont boot. Also in MTK Droid Tool I get --- ERROR :dev/radio/pttycmd1 inaccessible , should be Root Shell
--- ERROR : pttycmd1 device NOT found!
Chris2810 said:
I flashed EMOTION_Lolipop rom, and it worked fine, but I wanted to try something else so then I flashed MIUI v5. After that the phone wouldn't boot, it was booting for more than 10 minutes and nothing happened, also the screen was upside down. I wiped everything, flashed it again, but still the same. Then I tried MIUI v6 rom, now it keeps restarting as soon as it turns on. I can get to CWM recovery, I wiped everything, flashed back EMOTION rom, but when I turn it on it still has MIUI v6 logo, and it still keeps restarting. Screen is upside down even in recovery.
Please help.
Click to expand...
Click to collapse
i cant understand that "upside down" but flash via spflashtool the backup of stok rom and check that"upside down" if is fixed.
then go back to your lovely rom!
Trimis de pe al meu SM-J500FN folosind Tapatalk
I was getting a "pmt changed for the rom it must be downloaded" error, also some other errors, but anyway after I formated it then I sucessfuly finished flashing with "SPflash tool backup for ZTE Blade Q Vip.rs / Serbia" from "http://forum.xda-developers.com/zte-blade/general/zte-blade-q-spflash-cwm-backup-t2926264".
My original rom was also VIP but for Croatia. When I turned it on I could hear the sound but on screen there were weird vertical lines, so I tried the second one "SPflashtool backup for ZTE Blade Q Maxi (Orange Reyo) / made by @vaserbanix", and now everything looks normal but it's booting for probably ten minutes.
MTK droid tools doesn't recognize it when I connect the USB, but in the device manager it's visible as MTP USB device.
Any ideas?
I wiped everything from recovery, now it finally booted. It's just locked to ORANGE, I'll try another ROM to see if that will solve it.
Chris2810 said:
I wiped everything from recovery, now it finally booted. It's just locked to ORANGE, I'll try another ROM to see if that will solve it.
Click to expand...
Click to collapse
it should be network free after format(unlocked)
Trimis de pe al meu SM-J500FN folosind Tapatalk
vaserbanix said:
it should be network free after format(unlocked)
Trimis de pe al meu SM-J500FN folosind Tapatalk
Click to expand...
Click to collapse
IMEI was missing, I entered it through engineering mode because for some reason MTK droid tools is not recognizing the device.
Everything works now, thanks.
Actually mobile data is not working since then, do you know how to fix that? I entered APN manually, doesn't help.
EDIT: Nevermind, it's working.
But can I do anything to get the IMEI writen forever, so I don't have to enter it again after I change ROM.
No!
Slim_Stok-ROM J500FN
Related
Hi guys,
I recently tried to flash a rom on my phone and when the process was done, all I got was a black screen.
Fastboot still works and I can flash euro roms like on the tutorias fine but the phone simply wont boot.
I can go into emergency mode to flash in it in KDZ, the flashing works fine but still, the phone only displays a black screen.
When I press the power button it vibrates, the PC recognizes the device fine, so I know the phone isnt bricked, I just cant get it to display anything on the screen! please help!
Which rom did you try ?
Using swiftdroid RC4 2.0, but I found out what the problem was. Since on flashboot factory reset was in German, "reset und wipe" or something like that, I did not check it. Reflashed it and it is now working, the only problem is taht tehre are no boot animations whatsoever. only a black screen between pressing the button and going into android. any fix for that?
thank you for the replies!
EDIT: Also, by going into reboot > Recovery, nothing is displayed. this only happens on boot. I flashed originally with Euro+fast.kdz, and that is when this problem begun.
Flash this boot.img
and for the recovery, ace you installed??
I installed CWM for recovery, if that is what you asked.
Going to try to flash it and let you know, hope it does break anything
EDIT: nothing. No boot images. Going to leave it alone until I need it for something. I use an X10 mini, I just bought this phone for testing. Not liking the resistive screen!
you tried to flash an X10 with Rc4 ?
No, I have an X10 which is my default phone, I boght this optimus for testing, I flashed RC4 on the optimus, not the mini. not that stupid
You're not the only one with this problem, this will fix it.
http://forum.xda-developers.com/showpost.php?p=10238074&postcount=41
Did you tried with another ROM ?
Yep, follow this... since I can't post links, I can't help......
Hi I need some help, yesterday I was trying to put Cyanogenmod in my phone, because it works the u8800Pro version but with some bugs, and because I had MIUI and I didn't like it, because my battery was running out all the time, it was a little bit slow and it got hot temperature all the time.
So, I did the wipe, the system format and then i tried to install the zip file from the geno, but it wasn't the U8800Pro zip, it was the U8800... (I didn't realized at the moment ), so I tried to install it, but it took me back to the recovery main menu.
I turned off the phone, and I thought that the CyanogenMod didn't worked for my phone, so i put the original recovery and boot files, and then the dload with the froyo image. (And now I realized that it wasn't the right zip)
So, When I turn on the phone, it shows the "entel" logo, but then it turns off, And everytime I turn it on, happens the same thing... I tried also with the Gingerbread update.app, but it doesn't pass the "entel" logo. It doesn't show the update process as normal...
I can get the Pink Screen. But when i put the charger it shows me the "entel" logo, and then it turns off, over and over again. I mean, normally shows (at charging) the entel logo and then the battery charging screen. Now it doesn't.
What can I do to "repair" my phone, is there something i can do to go make it work again? I just want to make it work :'(
Please somebody help me. Please.
EDIT: Thankfully i had a backup, Now My U8800 is working with the official Gingerbread.
colo lo hicistes
agradeceria me dijeras como lo hicistes ya que tengo casi el mismo problema
gracias
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
rahulraina7 said:
I think I have brick my LG-e615 L5(Dual)
Here's what wrong did I do to reach this situation:
I was happily running a jelly-bean BHEK BHEK rom that I flashed through CWM.
I don't what got into me and I downloaded MIUI ROM for L5 E612 and flashed it.
But before that I took I installed Rom manager ( for making a nandroid backup) which had one more CWM in it. I think it some how made to CWM's and that's where the problem started . I booted from the CWM of the ROM manager, because I couldn't load my earlier one, from the reboot menu and flashed the MIUI Rom .
Now whenever I start my phone it would dispaly the LG LOGO followed by MIUI Logo and It would show the Jelly bean shutting down screen and shut down.
I tried wipe through adb that too didn't helped. I think now I can't even connect adb.
Whenever I connect my phone through USB it would show a charging screen for 3 seconds then LG logo and this goes on forever.
What should I do. Please help. I am really scared . My parents are going to kill me..!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
I cannot go into emergency mode too..
Reply
have you tried the hard reset mode?
Torres00 said:
have you tried the hard reset mode?
Click to expand...
Click to collapse
yes. doesn't work either
You try flashing stock rom on kdz updater?
Sent from my GT-P3100 using xda app-developers app
Volume down and plug usb
Sent from my GT-P3100 using xda app-developers app
Hello guys,
I have a big problem with my girlfriend's Nexus 4 with CM11
She left the phone COMPLETELY discharged (0%) for the whole night (about 9 hours)!!
The morning after she put it on charge (with power supply) and when she tried to restart it remained stucked on the boot animation...and then we realized that something was wrong.
I tried this to recover:
1) Wipe cache / Dalvik cache KO (It starts then upgrades applications then remain stucked on "Starting applications")
2) Deleted batterystats.bin KO
2) Full wipe + flash CM11 KO
3) Full Wipe + flash KO Paranoid Android
4) Flash stock (with stock recovery) KO
When I say "KO" I mean that the nexus starts-up but remain stucked on the boot animation (except for the test 1)
I can, however, enter fastboot mode.
I honestly don't know what to do anymore
Do you have some ideas?
Thank you very much!
Is the imei properly displayed?
Flash back to stock 4.2.2 then try flashing back to cm11. Make sure you have a compatible modem and bootloader for cm11.
Do you have the red light?
If yes, look here
http://forum.xda-developers.com/showthread.php?t=2250454
Personally, I managed to charge the battery with wireless charger only.
Unleashed by my Nexus 4
I had the same problem but i somehow got out of it. Don't worry if i can remember how did it solved it i will surely post it.
Sent from my Nexus 4
Use a toolkit to flash the factory image. This should solve your problem. Good luck.
Gesendet von meinem LG-P880
I tried to flash stock 4.2.2 and it worked but unfortunately the nexus didn't recognize the sim card .
Searching the internet I found lot of people talking about a weird IMEI code. Well, I checked mine and it was blank!
Yes, there is no more IMEI code and the phone si actually like a tablet.
Anyway, I contacted the amazon's customer care and they opened me a RMA.
Thanks to all of you for the help
So 2 nights ago I decided to switch from a stock based 7.1.0 mi favor 5.0 rom back to lineage os.
Backed up all my goodies, went into twrp wiped out everything. moved my few flashable zips back onto storage and attempted to install
Every time I try to flash any rom at this point It refuses to complete (I tried a few other roms) I also tried to go back to the stock based rom and failed.
flashed bootstack and modem again as supplied in the lineage os page and I am certain I used the files for my phone.
got trapped in edl mode.
used the axon 7 toolkit to recover back to stock. stock wont boot (waited 20 minutes and gave up on boot screen)
got twrp installed again.
twrp cant see internal storage SDcard but my computer can. I had no way to flash any files without going and buying an actual sd card
get into edl mode and recover to stock again (still wont boot) so Installed twrp
twrp can see sd card again so I tried to flash lineage once more (still wont complete) after 10 minutes I give up and reboot
twrp wont mount a few partitions now cache etc.
My next move would be to boot to edl and restore to stock again and get twrp working.
My problem is I expect twrp will still fail to flash any rom.
am I missing something big here? am I just an idiot with a pretty paperweight?
Is it possible that there is some deeper problem with my phone? its been exposed to extreme cold/heat dropped many times, magnets, steel dust etc. over the last 2 years.
I will try any good suggestions anyone has, if anyone is willing to help me.
Also feel free to call me an idiot for any of the many dumb things I did (not making a backup etc.)
Just flash stock version with miflash and EDL.
Gesendet von meinem ZTE Axon 7 mit Tapatalk
^ just that. I did couple stupid moves trying out Oreo and ended up with blank system, but since bootloader was unlocked and EDL mode is independent of everything else and we have nice tools to just flash using it - viola.
marcus.linkenbach said:
Just flash stock version with miflash and EDL.
Gesendet von meinem ZTE Axon 7 mit Tapatalk
Click to expand...
Click to collapse
That's the thing. I did that. The first time it flashed but wouldn't get past the first axon screen (before the "your bootloader is unlocked" screen) and the second time it just wouldn't complete a boot. After 20 minutes I gave up. I guess I'll try again and give it a few hours for first boot time if I need too...
@masong397 get it into EDL .. power off and then power on holding vol up & down plus power for 15 seconds until you get a black screen and hear your pc bing that a device is connected .. then run miFlash and refresh so you see COM4 for example then select it and flash "ZTE_AXON_7_BOOTLOADER_UNLOCK_IMAGES_BY_TURKDEVS" This will at least get a bootloader working for you again