Database Users

Help me,, Cannot boot in to recovery

Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:

I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:

AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?

No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!

bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!

there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...

Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,

Cant install a Costum ROM

Greetings to everyone,
I would be happy if you can help me with a little problem on my Note 4.
For some reason I cant install a costum ROM on my Note 4 (N910F).
As soon as I have installed a ROM like NameLessROM the phone reboots, shows the Samsung logo for about 10 seconds, reboots, shows the logo, reboots, ...
Its the same thing happened to me once whileI tried to boot it with no system partition (wiped it)
I am using the newest TWRP.
Anyone got a solution?
Greetings
Robin

Sorry Robin for "hijacking" your thread but we're in the same boat
I'm having the exact same problem with my SM-N910F.
I've rooted the device using Odin3 and "CF-Auto-Root-trlte-trltexx-smn910f.tar.md5". This thread: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
That went fine and I checked the root privillige afterwords with a terminal app on the phone. I issued the SU command and got at .....root#. Don't know if thats the right/best way to check it!
After rooting the phone I still had the stock recovery tool so again with Odin3 I installed "philz_touch_6.59.0-trlte.tar.md5".
This also went fine and I can now access "PhilZ Touch 6" recovery tool.
From here I've tried installing three different ROM's ("GlamourS6v3_1", "Super.Fast&LolliFamous™[S6+Style+v2][PART.4.0.]_BOC3" and "Super.Fast&LolliFamous_[.PART.6.0.]_BOD2") but keeps ending up with a phone that just keeps rebooting.
When I install the ROM I start with the "Clean to install a new ROM" option and after that install ZIP. The ROM's are located on my SD card.
The installation succed and when I reboot the phone just continues to reboot.
Any good advise?
Regards
John

You have to flash via odin the right modem and bootloader for the ROM that you're trying to install

mone, your a genius! Or maybe you just read the instructions more carefully than I did
I found the exact info and links in the ROM thread and everything is working now.
Thanks!
/John

RDieker201 said:
Greetings to everyone,
I would be happy if you can help me with a little problem on my Note 4.
For some reason I cant install a costum ROM on my Note 4 (N910F).
As soon as I have installed a ROM like NameLessROM the phone reboots, shows the Samsung logo for about 10 seconds, reboots, shows the logo, reboots, ...
Its the same thing happened to me once whileI tried to boot it with no system partition (wiped it)
I am using the newest TWRP.
Anyone got a solution?
Greetings
Robin
Click to expand...
Click to collapse
Okay for Nameless ROM to work on N910F you have to install the SimplKernel and need to update your bootloader and modem accordingly.
imladris said:
Sorry Robin for "hijacking" your thread but we're in the same boat
I'm having the exact same problem with my SM-N910F.
I've rooted the device using Odin3 and "CF-Auto-Root-trlte-trltexx-smn910f.tar.md5". This thread: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
That went fine and I checked the root privillige afterwords with a terminal app on the phone. I issued the SU command and got at .....root#. Don't know if thats the right/best way to check it!
After rooting the phone I still had the stock recovery tool so again with Odin3 I installed "philz_touch_6.59.0-trlte.tar.md5".
This also went fine and I can now access "PhilZ Touch 6" recovery tool.
From here I've tried installing three different ROM's ("GlamourS6v3_1", "Super.Fast&LolliFamous™[S6+Style+v2][PART.4.0.]_BOC3" and "Super.Fast&LolliFamous_[.PART.6.0.]_BOD2") but keeps ending up with a phone that just keeps rebooting.
When I install the ROM I start with the "Clean to install a new ROM" option and after that install ZIP. The ROM's are located on my SD card.
The installation succed and when I reboot the phone just continues to reboot.
Any good advise?
Regards
John
Click to expand...
Click to collapse
If I''m not mistaken your phone model is N910F, if so you are flashing the incorrect ROMs as the ones you listed are for the exynos variant. So please look for ROMs in the correct thread "Galaxy Note 4 Android Development (Snapdragon)" And using PHilztouch recovery is not recommend and so I would advise you to install TWRP,
N910F = Trltexx
N910G = trltedt
Exynos:
N910C = treltexx

Black Screen, not able to get custom rom

Hi, so I've tried my best to follow all kinds of tutorials en guides but unfortunately I was only able to get miui v7 on the phone, but all the apps didn't work at all. So I tried to install other custom roms.
What I have done is to revert back to KK 4.4.2 and then root it(towelroot.apk) and flash twrp recovery(with autorec.apk). I get into twrp recovery and wipe cache/delvik & data + factory reset after that I tried
to install with the Aroma installer, but after the install I end up with dead black screen. I've read on the net that it says that I have other kernel, but I did install the roms which were meant for D802 LG G2. So I don't know what
I am doing wrong. Could someone help me out. Thank you.

You will need Kitkat basebad for this to work... Look use search button and download flashable Zip for your device... Good luck!!

Lg g2 no os at all

Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)

If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC

Spumpkin said:
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
Click to expand...
Click to collapse
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk

renzo090513 said:
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
cm11 => jb bootloader
cm12, cm12.1 and cm13 => kk bootloader

klemenSLO said:
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Click to expand...
Click to collapse
The current version is 2.8.7.3. Should I try other versions?

Did you solve the issue? Or is it still not allowing you to get into your F/W?

staylecrate said:
Did you solve the issue? Or is it still not allowing you to get into your F/W?
Click to expand...
Click to collapse
Hi!
I tried to install TWRP version 2.6.6.3, but it fails to flash it so I'm stuck with the version 2.8.7.3. All I'm able to enter is just the recovery mode. I can't enter the download mode so I can't flash the stock firmware.
Currently I'm out of ideas. I can't flash any OS, the TWRP fails everytime and creates errors.

Try flash bumped kernel like lp dorimanx then flash bumped bootstak then lp rom like cloudy or stock. Or google this: lg g2 unbrickable now xda ...that work for me

[URGENT]Yureka turned off suddenly and went on bootloop while normal usage

Hello everyone,
Im using my yureka since more than a year...I hav rooted, changed roms, kernels, softbricked, hardbricked and debricked and got rid of such sort of problems by following the posts in xda.
A month ago, i flashed stock rom cm11, rooted and flashed twrp recovery.. It worked good with no problems, but today while iam chatting, my phone freezed all of a sudden and switched off with no cause and thats it...ENDLESS BOOTLOOP!! :crying:
I tried flashing stock rom and other roms too...but same condition...bootloop continues...!! anyone expert or who know how to overcome this problem please help me in reviving my phone back to working...!! :crying: :crying:

anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!

ravi44teja said:
anybody please share your knowledge regarding this issue...please suggest me any solution if you can...do what really these forums are meant for...!!
Click to expand...
Click to collapse
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd

Abhi_569 said:
just wipe data,cache,system,dalvik and flash any rom...
or try flashing stock recovery via fastboot and install stock rom
if u are on cm11 use stock recovery for cm11 and flash cm12 rom via cm11 recovery
let me knw if this wrkd
Click to expand...
Click to collapse
thanks for ur reply buddy...i tried ur suggestion...but didnt work..
actually, when no procedures worked, i myslf hardbricked phone by flashing cm12.1 using kitkat flashtools, its screen gone blank and bricked and then i used the sd card method of debricking mentioned here http://forum.xda-developers.com/yureka/help/guide-unbrick-hard-bricked-yureka-t3303112
it then came upto cyanogen logo and hanging there, i tried flashing cm12.0 and same stuck at cyanogen logo..then i flashed cm11 stock rom, it booted up and switched on...
but now,
(1) wifi not switching on,
(2)Internal memory corrupted and showing error while opening file explorer as "there is no information available for the file system" , "the file or folder was not found" and internal memory not showing in pc..
(3) while opening camera it shows "revert to default file location", "insert SD card before using the camera" and unable to capture photos
(4) while trying to take screenshot, in notification panel it shows "couldnt capture screenshot, couldnt save screenshot, storage may be in use"
(5)sim cards not detecting at all
in cm 12.0 and 12.1, its nomore beyond cyanogen logo...:crying:

Fixied ?

Hell7 said:
Fixied ?
Click to expand...
Click to collapse
not yet bro