Database Users

Help me,, Cannot boot in to recovery

Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:

I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:

AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?

No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!

bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!

there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...

Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,

Lg g2 no os at all

Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)

If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC

Spumpkin said:
Hi!
First I tell you how I recently messed up my LG G2 D802.
I hadn't had a custom rom for ages and now I wanted to have one (This wasn't the first time. I've done this a lot earlier). I had always had root access, but not custom recovery. So the first thing was to install one and I chose to download Rom Manager from Google Play, and then install ClockWorkMod. So, when I was installing the custom recovery I came up with a problem: something went wrong during the installation (I have no idea why). When I booted the device, white letters and numbers appeared on the top left of the screen, saying something like: "boot certification error" and numbers like "[780] [800]" and so on. The screen went black and the phone didn't load the OS. So I was shocked of course because I had never had such a problem.
So, desperate for trying everything to find the solution, I tried tens of ways to try to fix the problem. Finally I read about thing called SRKTool. So I used it and ended up having TWRP on my device, and no OS at all. I tried to flash CM12 and CM12.1 (downloaded from the official site) but nothing works out. TWRP says that flashing the ROM is succesful but when rebooting the system it doesn't load the OS but it comes back to TWRP Recovery mode - WHATEVER I DO. I can't enter the Download -mode at all. I tried hard reseting (Power + Vol - keys), but once again it boots to the TWRP. I can't understand why the TWRP fails to flash the ROM even though it's saying the process was successful. Or maybe this problem is much more internal - and permanent.
After tens of XDA developers' threads I'm writing this here because I'm in need of help. I want to bring my G2 to back in life. I'm out of ideas. Can you help me? I tried to flash the stock firmware but guess what happened? The installation failed, and the device booted back to TWRP. So all I'm able to do is to use the TWRP Recovery. I appreciate your help. Thank you.
(Ps. I'm sorry if I break the rules by writing a new thread. My problem just seems to be so unique that I couldn't find help anywhere.)
Click to expand...
Click to collapse
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk

renzo090513 said:
The solution is easy. Download the stock rom for your model and install it with otg cable. The reason cm12 is not booted is because you need jb bootloader or caf bootstacks.
Enviado desde mi LG-D802 mediante Tapatalk
Click to expand...
Click to collapse
cm11 => jb bootloader
cm12, cm12.1 and cm13 => kk bootloader

klemenSLO said:
If you have access to twrp than you can do what ever is needed
what twrp version douy you have?
enabel MTP, so you can copy from PC
Click to expand...
Click to collapse
The current version is 2.8.7.3. Should I try other versions?

Did you solve the issue? Or is it still not allowing you to get into your F/W?

staylecrate said:
Did you solve the issue? Or is it still not allowing you to get into your F/W?
Click to expand...
Click to collapse
Hi!
I tried to install TWRP version 2.6.6.3, but it fails to flash it so I'm stuck with the version 2.8.7.3. All I'm able to enter is just the recovery mode. I can't enter the download mode so I can't flash the stock firmware.
Currently I'm out of ideas. I can't flash any OS, the TWRP fails everytime and creates errors.

Try flash bumped kernel like lp dorimanx then flash bumped bootstak then lp rom like cloudy or stock. Or google this: lg g2 unbrickable now xda ...that work for me

Can't root galaxy note 4 sm-n910c

Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!

It works fine with CF-Root for N910C for me.

evonition said:
Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!
Click to expand...
Click to collapse
https://forum.xda-developers.com/no...wrp-treltexx-unofficial-t3541190/post70628182

evonition said:
Hi guys! I can't root my SM-N910C. I followed Max Lee's steps in youtube via TWRP and I was able to do all the steps properly. But once I'm about to do the step wherein I will flash the kernel and I'll go to recovery mode it doesn't give the TEAM WIN screen. Instead, it'll say "Installing System Update" then will go to "No command" screen " then will give me the regular recovery mode. what shall I do? I've done the steps like 3 times now. and everytime I checked the software update in the about device it keeps telling me that there's an availble update for like 66.3mb.However, I've installed it so many times. it's not stopping. what shall I do to root my phone? please help me!
Click to expand...
Click to collapse
I had the same issue with my N9100 and I followed the instruction below. I worked for me hope this help you also
Quote:
Originally Posted by rjma
Hi. It has been some time since I rooted but try this:
1) After root finishes in odin, don't reboot to system
2) Install TWRP in odin and don't boot to system. from download mode boot directly to recovery
3) Install the custom rom you want in TWRP

Sry, I cant help you with that

MrDSM said:
It works fine with CF-Root for N910C for me.
Click to expand...
Click to collapse
what's CF root?

CF-Root explanation
evonition said:
what's CF root?
Click to expand...
Click to collapse
CF-Root / CF-Autoroot is a flashable file created by the renowed developer Chainfire.
Once flashed into your phone it installs the root-manager app "SuperSU" (also from Chainfire) and does a few other mods for you to get root access.
It is important that your flash exactly the CF-Root file version corresponding to your phone model (SM-N910C) and Android version . For example, if you are using Android 6.0.1, you can get the file here:
https://download.chainfire.eu/559/CF-Root/CF-Auto-Root/CF-Auto-Root-trelte-treltexx-smn910c.zip
In case you cannot find the CF-Root file ready for installation for your phone model AND your Android version, then you can generate one by yourself in the main webpage, here:
https://desktop.firmware.mobi/
Please note in this last page you can create different "types" of file, and if you flash other that the "systemless" type you will lose your phones warranty.
Good luck !

Rooted, Custom Rom a huge fail

Hello dear Community!
It is depressing that my first appearance here is to ask for help, but I am going crazy.
So, I tried to Root my phone via Odin + CF Autoroot klte and it seemed to have been a success.
The root checker also said, that my device was rooted so I went on and installed TWRP to be able to install Lineage OS.
After getting Lineage to work I got a few error messages suddenly popping up, telling me that either "Music had stopped" or other android operation were closed because they didn't work properly.
I tried to install Gapps, it seemed to have worked but I was only able to open and enter the store once, afterwards the store never managed to load and then the app closed itself after starting it.
So I checked again with Root Checker, but this time it gave me an error message, too. It said, that my device was not rooted properly.
I guess this is were I made it worse by deciding to just root the phone again. Obviously, it didn't work either.
Afterwards I thought that maybe installing The Original Android OS and then unrooting the phone would be the best solution to be able to start anew.
First I tried to flah Lineage again and that made it impossible for me to boot the phone. The farthest I got was the setup page, were it tells you Hello and were you can choose a Language, but clicking the arrow key didn't do anything at all.
The recovery mode was also not the TWRP one anymore, but the original Android one and that was a huge problem for me.
Then I tried to flash the 6.1 OS for the S5 (I made sure it was the correct version), but now it is stuck at the "Samsung" screen while it boots.
It never boots though.
I don't know what to do anymore.
Please, I beg you, could anyone help me out?

Don't flash the latest Lineage OS ROM
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke

mattybourke1994 said:
Hello AsylumAlice u shouldn't have flashed the latest Lineage OS ROM because now u will need a new motherboard for your S5 since the ROM corrupts the MMC chip now u will need to get a new MMC chip or a new Motherboard sorry that your s5 is now hard bricked but when u get it fixed flash the DreamUX S8 Rom it works flawless on my S5 SM-G900i
Yours Sincely
Matty Bourke
Click to expand...
Click to collapse
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.

Kinloch said:
What are the grounds for your claims?
You needn't root via CF-autoroot if your end goal was to flash lineage. CF autoroot was intended to root stock roms with ease and less effort.
Flash The LATEST, official TWRP via odin then do a FULL WIPE. Wipe system, data, cache and dalvik cache.
From here on, you have two options:
1.) Sideload the LineageOS rom via ADB
2.) Transfer it to the phone's storage via MTP and flash it from TWRP.
As for how to accomplish this, the forum search bar and Google has your back. You need only choose one procedure.
If you need the Play Store, flash gapps AFTER flashing LINEAGE AND BEFORE REBOOTING.
Since you were under the idea that utilizing CF-autoroot was a necessity, I suggest that you re-read this post thoroughly before actually putting it into practice.
Click to expand...
Click to collapse
Thank you so much for your fast reply!
-> I flashed the newest Version for klte via Odin, but I can't get into the boot mode.
I only am able to enter the download mode. What can I do now?

Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.

Kinloch said:
Flash TWRP via odin again, untick the Auto-Reset option of Odin first. Then try booting to recovery via long holding the power, home and volume up button simultaneously without releasing any of the buttons until you successfully see the TWRP splash screen.
If that still doesn't work, reboot to recovery via adb from download mode. You need the adb and the usb drivers for your device.
If that still doesn't work, you might have flashed an incompatible version of TWRP.
Click to expand...
Click to collapse
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.

AsylumAlice said:
Thank you so much, it worked perfectly!
I can now start my phone and use it normally.
But the Root Checker still says:
"Sorry! Root access is not properly installed on this device.
Device: SM-G900M
Android version: 7.1.2"
What should I do from now on?
Thank you so much for your help (agaiN).
And as for why I used the auto-root, well I just followed a guide that I found, it only had positive reviews so I assumed it was a correct tutorial.
Click to expand...
Click to collapse
just flash supersu in twrp

AronFerr said:
just flash supersu in twrp
Click to expand...
Click to collapse
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.

AsylumAlice said:
I thought about doing that, but wasn't sure how exactly to proceed and what Version to install.
I downloaded SuperSU v.2.82 and put it on my internal storage.
Just install over TWRP the same way that I Installed Lineage and Gapps I suppose?
I guess if it doesn't work out, I just follow the steps from above again and retry?
Thank you so much. I feel like in idiot in this situation.
Click to expand...
Click to collapse
yes just flash it but no wipes

Stuck with flashing custom rom

Hello everyone, first of all am a newbie and I am trying to flash my Note3 with custom rom, I installed twrp using Odin, first I faced an error that Everytime Odin will say pass but phone will boot normal, how ever I find the solution by unchecking auto reboot in Odin, after pass I'll unplug the device, pull off battery then restart and it will get me to term recovery and it works fine afterwards. I tried installing few custom ROMs like magma nx, dark lord x etc but after everything done phone get stuck in bootloop. First I did the same and got stuck then I did a stock rom flash and got the phone working again, how ever I tried flashing again with magma nx and it got away from Samsung logo to pyeongchang edition logo and got stuck there, all the roms I tried give me same error. Am using twrp 2.8.7.0. I had also rooted using SuperSU, how can I get past this? Any help will be appreciated.. thank you

What phone model ??
Bootloop read the thousands of bootloop posts use roms SEARCH THREAD box bootloop .
Difficult to know what you are doing wrong without more information .

Model is a Note 3 N9005,
I have gone through most of the threads but I am not finding a solution yet, as I said :-
1) Installed TWRP using Odin
2) Rooted the device
3)Placed few Custom ROMs in SD
4)Flashed using TWRP (followed instructions)
5) Flashing finished successfully
6) Reboot
7) Bootloop
Stuck here, can I provide any other details?

3)Placed few Custom ROMs in SD
As in what rom one only not multiples .
4)Flashed using TWRP (followed instructions)
Right twrp wrong twrp ??
7) Bootloop
What did rom thread say about bootloop ??
Updated bootloader >>when required .
Magma has full instructions and full faqs .
---------- Post added at 02:02 PM ---------- Previous post was at 01:43 PM ----------
mAGMA
SEARCH THREAD Bootloop
https://forum.xda-developers.com/search/thread/3508672?query=bootloop
FAQ
Q: I have bootloop right after I flash the ROM
2. In first boot, when asked to "Consent for Diagnostic Report", you forgot to uncheck it. As written in OP, you have to "uncheck" the Consent for Diagnostic Report.
To solve it:
1. Power off phone
2. Remove sim card
3. Boot to ROM.
4. Go to settings/general management
5. Disable "Report Diagnostic Info"
6. Power off Device.
7. Insert sim card.
8. Boot up phone and continue using it

Managed to make them work already, thanks for the help bro.. appreciate it

I managed to work around the issue of bootloop bro, it had something to do with the kernal , I already flashed to magma and it is working now, how ever I was curious that each time when I restart the phone, it took a bit time to load up, like note 3 logo first, then magma note 8 logo, then after that it says optimizing apps and actually it shows around 240 apps or so, is it normal or is there any workarounds for the same? (How ever, boots up fine but boot up time is around 7-12 min approx)