Related
Hi,
So I have created this thread just because I can see many people creating new threads as after flashing CM 14.1, their phone doesn't boot up. So for all those who are going to flash CM 14.1 or have already flashed it and can't get it working, this thread is for you.
What you will need:
1. Rooted OnePlus X (Obviously)
2. Custom Recovery (TWRP recommended)
3. Latest CM 14.1 build
4. Arsenic Kernel or BlackReactor Kernel
So this is how you get CM 14.1 working on your OPX (make sure your battery is above 80% just to be sure that nothing will go wrong considering battery's point of view)
Make sure you have backed up everything before performing the following steps as the process will wipe your data completely. (I would recommend to take a Titanium backup of all user apps and then taking a nandroid backup of system and data)
1. Download the required files and place them in your SD Card or internal storage
2. Reboot your device into recovery
3. Go to wipe, and swipe to factory reset (Note! This will completely wipe all the data from your device including app data and SMS! This won't wipe the contacts but just to be safe, have a backup of all your contacts)
4. Go to Wipe again, and go to Advanced wipe, select the following partitions - System, Cache, Dalvik cache. Swipe to wipe (Note! Make sure you have a backup of the System as this will wipe the Operating System from your phone!) Although this step isn't necessary, I like to do it.
5. Go to install, and direct to the location where you have saved the CM 14.1 zip file and the kernel. Select the files, and swipe to flash.
6. If you want anything else in your system, direct to that location, select the zip file, and swipe to flash. (Note! You need not flash the SuperSU zip file as CM offers Root access in developer options)
7. Reboot your system and wait for it to boot.
Viola! Your device is now running official CM 14.1 nightly.
Hope this helps! ?
Downloads:
1. Latest CyanogenMod nightly - found here https://download.cyanogenmod.org/?device=onyx
You can have any version of the nightly as long as it is CM 14.1
2. Arsenic Kernel R32 (or R31) - http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Open the above thread and follow the guide
OR
Black Reactor kernel v1.0 - http://forum.xda-developers.com/oneplus-x/development/kernel-blackreactor-kernel-oneplus-x-t3460989
-Reserved-
Good Evening, @aamodjoshi23 THX a Lot. You are my Hero. Finally it works.
greetings
If you're facing some Error 7 while trying to flash cm 14.1, you can try updating the bootloader following this
http://forum.xda-developers.com/showpost.php?p=69267239&postcount=2560
I used the Oxygen OS 3.13 full ROM as recommended, edited updater-script (following those instructions)
Immediately after flashing the OOS 3.13 rom, you don't have to reboot.
I immediately flashed twrp 3.0.3 original from https://dl.twrp.me/onyx/
I then rebooted into twrp 3.0.3 (using the reboot button in twrp, then bootloader)
Then I installed (in this order):
cm 14.1 (https://download.cyanogenmod.org/?device=onyx)
arsenic kernel (as recommended above)
opengapps
Not sure if this step is necessary, but I wanted to let twrp patch the rom to not overwrite twrp so I rebooted into twrp again (using reboot --> bootloader in twrp)
Then I used reboot --> system
First boot took a while, but now I have nougat!!
kenel zip every time
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
allons-y said:
Do i need to flash the kenel zip every time I update the the cm 14.1 zip file?
Click to expand...
Click to collapse
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
aamodjoshi23 said:
Yes, as when you flash the CM 14.1 build, the kernel that is provided with the build is also flashed, and that is not supported. So you need to flash it every time you flash a CM 14.1 build, but if you want to flash any other build, something like CM 13.0, then you need not as the kernels provided in those are supported.
Click to expand...
Click to collapse
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
shashanksachdeva said:
Hi,
I have a very specific problem. I rooted my Oneplus x few months back and everything was fine. I use to get update notifications and after downloading it use to update automatically. But since last 2 months i download the update files but it takes me to recovery and then i cant find the zip file to flash/install. (i also started using external sd card two months back, but not sure if it has to do anything with this). I tried searching a solution on web - tried checking 'system' under Mount tab, installed an app for auto update and some more but no use. I even connected my phone in recovery mode to laptop and copied the zip file to internal memory but while flashing it gave error.
Now i am not sure what the problem is. Do i need to update my recovery or something else. Pls help.
Click to expand...
Click to collapse
First of all we need more info about your current ROM recovery etc.
Fap4k said:
First of all we need more info about your current ROM recovery etc.
Click to expand...
Click to collapse
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
shashanksachdeva said:
I installed CM 13.0-20160928-NIGHTLY-onyx and the recovery is: TWRP v2.8.7.0 | blu_spark r8
I'll be grateful for a solution.
Click to expand...
Click to collapse
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Fap4k said:
In October oneplus updated to 6.0.1 officially i.e OOS 3 it brings new bootloader to the device as you are using old recovery you can't flash new update..so you need to upgrade to latest bootloader by following thread available in general section or you can flash stock recovery and upgrade to latest OOS and flash whatever you want to flash..I recommend you to see how to upgrade bootloader in general section if you are planning to flash custom ROMs or if want to flash latest OOS then simply flash stock recovery and upgrade. onece you updated to OOS 3 after that you can flash new official twrp 3.0.3.0 from its official page.
Edit: for old bootloader you need stock 5.1.1 recovery..which is not available in official oneplus download page..so just follow below link
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Click to expand...
Click to collapse
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
This is because you flashed wrong recovery twrp 3.0.3 is for new bootloader and you are on old bootloader..that's why it all happened..so you just need to flash old recovery..then follow given link to upgrade bootloader and recovery.
shashanksachdeva said:
I made a blunder. I read somewhere to upgrade TWRP to 3.0.3 and after doing that now i just can't access the recovery mode. When i try to boot in recovery mode the screen gets stuck with One+ logo. Then I even tried to Factory reset and the phone rebooted to the same screen stuck with logo. I longed pressed the power button and it got switched off and then again turned it on. It started and is working fine but I cant factory set it, nor cant I access recovery to flash anything.
Click to expand...
Click to collapse
I've got a good news and bad news for you.
The bad news is, no one has the older 2.8.x TWRP image files and there are no threads that have the download links for the older version of TWRP. So you're stuck and you have lost your recovery. You have lost everything... Having no recovery means you can't do a lot of things like factory reset, any wipe of a partition, you won't be able to update your system, you won't be able to flash zip files to enhance your experience and many more... I'm sorry my friend...
The good news is, I've got you covered. I had saved the older TWRP so that if anyone one day would need that recovery image, I would be able to help them.
Download the older TWRP from here : https://drive.google.com/file/d/0B2Ms-zaNd3SiTmpxX0UtYUV2R1k/view?usp=drivesdk
Flash it. You should get back your recovery.
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Fap4k said:
Which ROM you are on currently?
If possible post screenshot of about device in setting.
Click to expand...
Click to collapse
using resurrection remix marshmallow 6.0...
Plush suthar said:
using resurrection remix marshmallow 6.0...
Click to expand...
Click to collapse
Did you ever updated bootloader?
If not than update your bootloader and install latest recovery!!
Plush suthar said:
e: unknown command (log)
e: unknown command (log)
am not able to make my device android 7.0 running...
i tryed and install kernal after that but no luck, stuck on boot only 1 plus logo will appear, please recommend any solution.
Click to expand...
Click to collapse
By stuck on boot, I didn't know you meant that it showed only the OnePlus logo and not even powered by Android.
In that case, follow this guide to update your bootloader :
https://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Quicka said:
Heyy,
as i had some problems with my g2 i had to flash stock rom kitkat 4.4.2.
I rooted with ioroot, downloaded lineage and gapps files, flashed custom recovery with autorec but if i then go to twrp and install lineage os and gapps, i always get "your device does not appear to have root. do u want to install supersu?", althoug ive checked root with "root checker" before... i cant find the mistake
I WANT LINEAGE OS
Click to expand...
Click to collapse
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Jan Philipp said:
Autorec is just the first step to twrp. Go to https://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705 and get the bumped version 3.1.0-1.
Then put it in your phones memory, boot into twrp you got from autorec and flash the new version.
Click to expand...
Click to collapse
i have done it... but after i wiped data,... etc. flashed lineage os and gapps and reboot system, phone screen gets black... and i can only go to download mode to flash again stock rom ive tried it about 5 times
Problem fixed
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Quicka said:
problem fixed: flashed lollipop firmware, then rooted with LGoneClickRoot and installed TWRP with autorec
Click to expand...
Click to collapse
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
djsasha78 said:
How did you flashed your phone? Your display have been black and you haven't seen anything. How did you entered into download mode?
Click to expand...
Click to collapse
just held the volume up button and then connected with pc. then using lg flash tool to flash lollipop stock rom
1. Root + TWRP : https://www.dropbox.com/s/2shvozzbu29xjfu/LGG2-D802-OneClickRootRecoveryV1.1.zip?dl=0
2. Update TWRP to 3.1 by flashing zip file and then rebooting recovery: http://www.gregtwallace.com/lgg2-projects/twrp/?version=3.1.0-1
3. LineageOS by flashing rom zip file and gapps: https://download.lineageos.org/d802 + http://opengapps.org/ (ARM + Android 7.1)
easiest method to flash lineageOS on LG G2 https://www.youtube.com/watch?v=BoPjGM0nrak (Video tutorial)
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
JackSparreau said:
Hi,
It seems I have the same issue :
I tried to install LineAge, using TWRP 3.2.1 (from CM12.1), but nothing is working (I tried 20180425 and 20180404 nightly versions). After reboot I can see the backlight on the lcd screen but nothing else. Then I tested the installation of a CM12 version, all is right, normal boot. No error message written in the console. i tried also a CM13 install, same as Lineage.
Do you think I have to flask back to LG "OS" ?
Click to expand...
Click to collapse
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
cropsroth said:
Are you clean flashing? Make sure to factory reset, wipe system, data and cache before flash. Never wipe internal storage. Swipe factory reset again after flash. Try flashing gapps later after confirming that Rom boots fine.
Click to expand...
Click to collapse
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
JackSparreau said:
Hi,
yes I wiped Dalvik, system, data & cache through TWRP, before flash. But I don't wipe after, I rebooted without GApps...
Maybe, because I read that somewhere, I need to flash a bootstack. I don't know when I have to di it, if I have to do.
Thanks
Click to expand...
Click to collapse
Yes, you don't wipe after flash, but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. Check MD5 of the all files you downloaded with original MD5 to confirm the file didn't get corrupt.
Boot stack flash not needed. Please read the first post thoroughly in lineage thread
"""
Requirements:
Custom recovery (TWRP or any other)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 13 (no dirty flash, wipe system too check you bootstack(needen bump support)
"""
crophs said:
... but you swipe the factory reset, it does not wipe but resets the flashed Rom. Give it a clean shot again. ...
Click to expand...
Click to collapse
Hi,
what do you mean by "you swipe the factory reset", I'm not sure what it is, either "give it a clean shot again".
Sorry I'm not very aware of all those processes ^_^, and I'm french so not very aware of some vocabulary words
Thank you
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Pobi123 said:
Guys this is help less.
After rooting my device I followed some instructions to get the Lineage 14. I flashed a BootLoader and a Modem as instructed and went forth to mount USB in order to transfer the custom rom into the device. But this is where the problem is.
It says E: Cant find partition to mount storage. I've tried to reboot, wide, data, storage, system and cache and repair the partition I don't know what else to do.
Anyone else can help? Btw I am fairly new to this stuff so please dumb it down for me.
Another thing, when I go to reboot my recovery it says my device isn't rooted and asks to install superSu, however it was rooted before I entered download mode and started installing bootloader and modem.
Now I have no operating system in the device so i can literally only use Recovery or download mode.
Is my device bricked? I don't know. :crying: :crying:
Click to expand...
Click to collapse
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
BlueCyclone said:
If you can boot recovery, all is not lost.
First, are you sure that you flashed the correct bootloader/modem for your s5 model (G900 T, P, V, F, etc? Odin should not let you flash the wrong one, but anything is possible.
If Bl/modem is correct, them the next thing is to get the custom rom onto the phone.
-make sure you have downloaded everything you need (rom, root method(pref Magisk), gapps if wanted)
- boot into recovery, I'm recommending and assuming that you are using the latest Twrp, if not, d/l official Twrp for your model, and flash that with Odin
-In twrp select wipe, format data, just in case.
-now you should be able to mount usb storage, using the option in twrp
- now you should be able to mount your phone to your PC and transfer the rom, put it somewhere easy to find on the phone. also copy gapps and Magisk zips
-now, still in twrp, select install, select rom zip, select add more, select Magisk zip, also flash gapps at this time if you want to use them.
-click the button to flash
-click wipe cache/dalvik
-click reboot
-pray ?
Click to expand...
Click to collapse
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Pobi123 said:
Hey man! Thank you so much for your reply. I installed CPE1 bootloader and modem driver, honestly I don't even know what they do. Was this a wrong thing to do?
I rooted my device using cf auto root, then flashed the bootloader and modem using Odin. After that I (stupidly) tried to boot my stock OS and it was stuck in a bootloop.
Unfortunately I won't be able to try your instructions this till tomorrow evening but I'll keep you posted!! do you mind if I pm?
Edit: I was using twrp 2.8.7 I believe, could this have been the problem? Also I updated twrp to latest and tried micro sd as storage and flashed a Rom but the phone is still bootlooping
Click to expand...
Click to collapse
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
BlueCyclone said:
Ok I see you have S5 plus. I'm not familiar with that device to know which baseband it should be.
One thing you might try is to boot recovery and clear cache/dalvik and then try booting the custom rom.
If all else fails, you might try Samfirm
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
That should give you a stock firmware file to flash with odin.
You can pm if you need to, I don't own an S5+, nor am I a veteran flasher but I will try to help if I can.
Click to expand...
Click to collapse
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Pobi123 said:
Ive tried the suggestion you gave me, no success. However I honestly dont know if it could be my fault. I'm gonna flash the stock firmware and restart the whole root process.
Thanks for your help man!
Click to expand...
Click to collapse
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
BlueCyclone said:
Ok sorry I couldn't be more help
Oh, you don't need to use of cfautoroot anymore, you can just flash Magisk after the rom, and then use Magisk manager to manage all your root permissions.
So if you are going back to stock, I would:
-Flash stock in Odin
-probably boot stock once to verify (first boot takes long)
-odin flash latest twrp(uncheck auto-reboot, just battery pull after it says pass)
-power on phone with key combo to boot recovery
- format data
-flash rom/gapps?/Magisk
-wipe cache/dalvik
-reboot system (first boot will take long)
Hope you get your phone working again
Click to expand...
Click to collapse
Good News! Phone is back in full working order after flashing stock firmware. It was kinda scary though, I had to fix an error in Odin and then the phone wouldn't even boot up! Left it over night, booted it again and it worked fine Thanks a lot for your help, I'll try not to soft brick my device again
Hello, so im stuck now on startup. I actually rooted my phone a week ago and everything's fine until I've downloaded some cracked apks online and restarted my phone. Please help what would i do now
imgur.com/a/07UWA4l
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Paramvir Singh said:
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Click to expand...
Click to collapse
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Never done this on my M1 but on my note edge,
When i got a bootloop, i simply reinstall stock rom, or just clean install custom rom
abcnormal said:
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Click to expand...
Click to collapse
Ok so it's good opportunity to try something new...first you need to download custom rom and gapps package to sd card (always a better option)or internal storage...do the downloads on pc or somewhere else...
1. Wipe cache, dalvik cache, system, vendor, data, internal storage(this one is optional)
2. Mount extsd card
3. Install Rom package...(i personally use xenonhd based on pie) from here https://mirrors.c0urier.net/android...tal/X00T/XenonHD-181007-Experimental-X00T.zip
You can try any other of your choice
4. Install Gapps package from here..http://download2264.mediafire.com/r0vq21tabscg/m1u4llu62bdwyos/BiTGApps-arm64-9.x.x-0.1-unsigned.zip
5. This step is optional if you want root access then flash magisk package from here..https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and uninstall package from https://github.com/topjohnwu/Magisk/releases/download/v17.2/Magisk-uninstaller-20180921.zip ......after tge rom boot up install magisk manager from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
6. Reboot to system..first boot up will take 4-5 minutes...ENJOY
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
abcnormal said:
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
Click to expand...
Click to collapse
Stock rom available at asus website is not flashable through twrp...u need twrp flashable zip...download this file...
https://forum.xda-developers.com/showpost.php?p=77671149&postcount=83
And also decrypt file from here.... https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/mod-decrypt-data-t3787311
After flashing the rom...flash decrypt zip
And remember to wipe internal storage after flashing these two zips!
Hello sir i got stuck in bootloop in asus max pro m1
Actually its not showing anything screen is blinking as i try to turn it on. I was on custom rom and suppose to install stock rom and i followed every step but my phone doesn’t start its just reboot and nothing displays anything. Please can anyone tell me the solution of this issue.
did u solved issue
how did u soolves issue ??
Sorry for my wrong English
I am currently on stock miui 10.3.6.0 .I have unlocked the bootloader,Installed TWRP recovery & rooted my device with magisk.Now i am unable to get the latest miui 10.3.7.0 update.!
Is there any way in whick i can update my device to latest miui rom?
If there please help me.
I am not finding any link which is helping me.
I downloaded latest miui recovery rom from here but unfortunately there is an error i.e flash all.bat is missing in xiaomiflashtool.Tried to flash the same rom through TWRP but there again is an error i.e compatibility zip missing.
a download link to miui 10.3.7.0 fastboot rom will be appreciated.please help
Thanks in advance
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
darhma said:
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
Click to expand...
Click to collapse
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
ChandrakantBelell said:
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
Click to expand...
Click to collapse
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
darhma said:
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
Click to expand...
Click to collapse
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
ChandrakantBelell said:
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
Click to expand...
Click to collapse
You have to flash twrp reboot to recovery if it asks for a password format data then install magisk. Vbmeta is needed just when you change rom from miui to aosp, so in this case you don't need it