I have an s4 i337 which was rooted & setup with lollipop 5.0.1 & GE rom. I had a problem with not being able to download files, I (maybe correctly) determined I had lost read/ write permissions for my internal (emulated) sd card and attempted to fix this (definitely unsuccessfully) a few different ways, the last of which was running fix permissions in TWRP (which booted to my GE, nothing fixed and all apps missing) and then I did a data wipe/ factory reset (which now boots to either stock or rooted lollipop with no access to my settings, no acess to google play, no internet - so worthless).
safestrap is installed but not enabled. I've tried flashing the NC1 flasher zip from the stock recovery to get into TWRP to restore from a backup or do a clean install of GE but that didn't work.
I'm not sure if I have root or not still and, since I can't access my settings when booted, have no way to check install from unknown sources.
when in factory recovery it says I'm on OC3.
what do I do next to get somewhere with a restore operation?
Related
Sorry guys may I ask a question relative to restoring apps via TiBU?
Before flashing stock 4.3 I had updated TiBU and backed up my apk's+data
Wiped everything to have a clean slate for TRIM to work perfectly and I've started to restore my apps.
TIBU takes forever to install a single apk, actually never ends.
Reboot.....
If I try to install apk from the market and then restore only the data from TiBU the app crashes.
After that I cannot reinstall the app anymore even from the play store.
Is there a way to overcome this?
Thanks
PS: I have already tried the solution Menu/Preferences/backup folder location
PS2: Nexus 4 - built JWR66Y - FRANCO r178
vagos696 said:
Sorry guys may I ask a question relative to restoring apps via TiBU?
Before flashing stock 4.3 I had updated TiBU and backed up my apk's+data
Wiped everything to have a clean slate for TRIM to work perfectly and I've started to restore my apps.
TIBU takes forever to install a single apk, actually never ends.
Reboot.....
If I try to install apk from the market and then restore only the data from TiBU the app crashes.
After that I cannot reinstall the app anymore even from the play store.
Is there a way to overcome this?
Thanks
PS: I have already tried the solution Menu/Preferences/backup folder location
PS2: Nexus 4 - built JWR66Y - FRANCO r178
Click to expand...
Click to collapse
I don't trust TiBU. its a real mess for me. I for one backup my ANDROID folder, and flash all apps through recovery. and then copy back the Android folder on SDCARD.
How did you root your 4.3 image? Many custom kernels break root on 4.3. Try re-flashing SuperSU or re-flash ROM and stick to the stock kernel.
via Nexus Toolkit. I'm still rooted even after applied Franco, but I'll revert back to stock kernel just to check your possibility.
Even the saved TiBU apk's are not getting installed.
How can I re-install the broken apps which were affected from TiBU? As I mentioned even fresh installation from the play store is not processed.
I was hoping to avoid re-flashing and re-rooting from scratch.
Nope even with stock kernel I face the same problems. Any suggestions?
I guess there's something wrong with your /data partition. I'd either start over with flashing the factory image or at least format /data (not wipe, really format). Don't forget to backup your internal sdcard content first, it will be deleted with both methods.
Also I'd recommend not using a toolkit for flashing the factory image and rooting. It's easy enough using fastboot and a custom recovery. This way you'll be on the safe side, not missing any errors etc.
Make sure your TiBU directory is set to storage/emulated/legacy/TitaniumBackup, not storage/emulated/0/TitaniumBackup.
It worked for me, anyway. Well, after having to perform a factory reset, as it screwed up the UUIDs, that is
Thanks for the suggestion. You were right my path was storage/emulated/0/TitaniumBackup.
I revert it to the suggested one but I have the same issue.
Factory reset, start from scratch, initial path storage/emulated/legacy/TitaniumBackup
The same problem which also end up destroying the fresh apk as well.
Hopeless
Tell us exactly what you're doing. Which ROM / image, software, versions, procedure, all the details. Maybe something other well ring a bell.
As already quoted
1. Before updating to 4.3, I updated TiBU to the latest version and kept backup of the apps+data
2. Clean flash of stock 4.3 ROM (JWR66Y) via Nexus Toolkit
3. Root (Busybox, SU etc)
4. Flashing Franco Kernel r178
5. Installation of TiBU
6. Try to restore - PROBLEM
Plan B:
1. Factory Data Reset
2. BusyBox gone but still have root access
3. Stock ROM - Stock Kernel - Rooted
4. Install TiBU
5. Restoring - PROBLEM
Description of the PROBLEM:
I cannot restore apk's is getting into a loop and never ends.
I can restore data to an installed apk, but then the app crashes
I cannot re-install the (restored) app via playstore, I get "unknown error code during installation -24-"
Current situation
1. Factory Data Reset again
2. Franco r178
3. No restores via TiBU
Don't shoot me, but it still sounds like the TiBu 4.3 ROM backup folder path problem. Here's what I do and what works for me:
1. Open TiBu
2. Click on "Menu"
3. Click on "Preferences"
4. Click on "Backup folder location"
5. Click on "DETECT!"
6. Click on "Whole device"
7. Choose "/storage/emulated/legacy/TitaniumBackup"
8. Click on "Use the current folder"
9. TiBu will now ask if it should move the other backups to the new folder, say no.
10. Exit the preferences with the back key
11. TiBu will now reload with the new preferences
Now restoring should work if the path is the problem.
About loosing root with a custom kernel on 4.3 ROMs:
If you lose root by flashing a custom kernel it may still seem like root is active, i.e. the root frontend app will still be there and ask for root permissions etc. Try the following to ensure that TiBu is running with full root privileges: Uninstall some unimportant system application (some Gapp for example, like Google Currents - backup first if you need it). If uninstalling gets cancelled with a message like "Can't find the apk file", it's likely that root doesn't work properly.
Come on man, I hate to give up
Thanks for the inspiration but unfortunately:
1. I can unistall, backup and restore properly Google Currents (hence proper root)
2. Back up folder was set properly also by verifying your steps (2-10)
And again if I try to restore an old app (not the data) it gets to the familiar loop.
Ok. I'd now flash the full factory image, thus resetting every partition (backup internal sdcard first). Please try without a toolkit to be safe. You need the drivers installed (your toolkit should already have taken care of that) and have adb and fastboot ready. There are batch/shell scripts included in the factory image which invoke the fastboot commands in one step.
Next flash a custom recovery with fastboot and use it to flash SuperSU for root access.
Refrain from flashing a custom kernel now and try if you can successfully restore with TiBu at this point.
If you can, the problem was either one of your partitions/filesystems f_cked up or the toolkit doing something wrong.
Recently installed Hyperdrive Rom on my Verizon Note 3. SM-900V, NC4, running KK 4.4.2 prior to this installation.
Followed instructions re flashing back to NC2, Rom installed, everything is good,
BTW, as a part of the process installed SafeStrap, which provided a nice TWRP related recovery.
Did as suggested, a backup through recovery.
subsequently, made a couple of other changes, making a new backup through recovery each time. At present, there are three recoveries in backup.
Now comes the problem...........Decided to restore a prior backup, as instructed, did the full wipe using SS recovery, selected restore file desired, all went well and rebooted phone, only to have it hang once it reached the Bright Red Verizon screen.
Rebooted to recovery, followed the above procedure two other times on the remaining two backups. Same results.
Have wiped (Factory reset) each time in recovery with no apparent success.
Is this now being caused by the fact that I'm @ NC2, rather than NC4?
Would appreciate any suggestions as how I can get back to being able to restore and use any of the prior backups.
As a temporary measure, I went into recovery and reinstalled the Hyperdrive rom but would like to be able to go back in time if possible, and for no other reason to be able to understand just exactly what is causing this issue. Perhaps others have the same and have resolved in some way. A Google search shows that some are suggesting a return to factory settings, i.e. a full wipe through recovery, however I've done that with no success.
Another question, what happens if I also "wipe" the system files as well as dalvic, cache and data? Have hesitated to do that for fear of the unknown consequences
Recently installed Hyperdrive Rom on my Verizon Note 3. SM-900V, NC4, running KK 4.4.2 prior to this installation.
Followed instructions re flashing back to NC2, Rom installed, everything is good,
BTW, as a part of the process installed SafeStrap, which provided a nice TWRP related recovery.
Did as suggested, a backup through recovery.
subsequently, made a couple of other changes, making a new backup through recovery each time. At present, there are three recoveries in backup.
Now comes the problem...........Decided to restore a prior backup, as instructed, did the full wipe using SS recovery, selected restore file desired, all went well and rebooted phone, only to have it hang once it reached the Bright Red Verizon screen.
Rebooted to recovery, followed the above procedure two other times on the remaining two backups. Same results.
Have wiped (Factory reset) each time in recovery with no apparent success.
Is this now being caused by the fact that I'm @ NC2, rather than NC4?
Would appreciate any suggestions as how I can get back to being able to restore and use any of the prior backups.
As a temporary measure, I went into recovery and reinstalled the Hyperdrive rom but would like to be able to go back in time if possible, and for no other reason to be able to understand just exactly what is causing this issue. Perhaps others have the same and have resolved in some way. A Google search shows that some are suggesting a return to factory settings, i.e. a full wipe through recovery, however I've done that with no success.
Another question, what happens if I also "wipe" the system files as well as dalvic, cache and data? Have hesitated to do that for fear of the unknown consequences
Bump
Kicking Deuce on the Beast, Note 3
sacgeek said:
Recently installed Hyperdrive Rom on my Verizon Note 3. SM-900V, NC4, running KK 4.4.2 prior to this installation.
Followed instructions re flashing back to NC2, Rom installed, everything is good,
BTW, as a part of the process installed SafeStrap, which provided a nice TWRP related recovery.
Did as suggested, a backup through recovery.
subsequently, made a couple of other changes, making a new backup through recovery each time. At present, there are three recoveries in backup.
Now comes the problem...........Decided to restore a prior backup, as instructed, did the full wipe using SS recovery, selected restore file desired, all went well and rebooted phone, only to have it hang once it reached the Bright Red Verizon screen.
Rebooted to recovery, followed the above procedure two other times on the remaining two backups. Same results.
Have wiped (Factory reset) each time in recovery with no apparent success.
Is this now being caused by the fact that I'm @ NC2, rather than NC4?
Would appreciate any suggestions as how I can get back to being able to restore and use any of the prior backups.
As a temporary measure, I went into recovery and reinstalled the Hyperdrive rom but would like to be able to go back in time if possible, and for no other reason to be able to understand just exactly what is causing this issue. Perhaps others have the same and have resolved in some way. A Google search shows that some are suggesting a return to factory settings, i.e. a full wipe through recovery, however I've done that with no success.
Another question, what happens if I also "wipe" the system files as well as dalvic, cache and data? Have hesitated to do that for fear of the unknown consequences
Click to expand...
Click to collapse
I am essentially having the same problem. I am currently running on Biggins ROM and that had me install a unified verision of the NC2 and NC4 kernels (I came from NC4 prior to flashing). I wanted to go back to stock root and flashed my backup from SS, everything went well so I restarted and just like you the phone just never went passed the Verizon logo screen. So I reinstalled the Biggins ROM and it works fine now but I also want to know what I have to do when I want to install other ROMS or simply go back to stock root.
I am trying to reinstall the original system and data onto my S5. I had Cyanogenmod on it, but before I installed CM12, I made a backup of {System, Boot, Data, Modem} as they existed with the stock system using TWRP.
I restored the partitions from my TWRP backup. Now when it boots, after the Samsung animation is shown, I am presented with a screen that says "Device memory damaged" (see attached image).
If I click the "Reset device" button, it boots into TWRP and attempts to clear some data. I assume it's not working because Samsung's stock recovery is supposed to do some magic that TWRP isn't capable of?
I have tried to clear the cache partition, and also tried to restore the data from backup more than once. The MD5 check on my backup files passes. Any ideas?
flash with correct pit and try to root, install cwm/twrp, restore your backup rom
I got it sorted out. I had to use Odin to flash the stock rom, which I downloaded from a questionable source online.
I just rooted my S5 to PB1 (have '11 eMMC so no MM) per another thread in this forum and had set everything up, then decided to make a full backup with SafeStrap. I loaded Safestrap-G900V-4.04_LL_MM, installed it, went to recovery and then made a full backup to the SDCard.
After completing the backup, I ended up in a SS loop and somehow back to a completely reset phone (however still rooted). I am looking for how to reinstall the backup correctly.
I plan to load all the necessary apps to once again get SS installed and to recovery. Is there anything special to do once I RESTORE my backup? Do I need to also install LL_KERNEL_SS-FF_Flashable.zip again after the RESTORE?
EDIT: THE ABOVE IS WHAT NEEDS TO BE DONE. INSTALLED SUPERUSER.APP, THEN BUSYBOX, THEN SAFESTRAP FROM THE PACKAGE USED TO ROOT. ONCE IN SS INSTALLED MY BACKUP, THEN INSTALLED THE LL_KERNEL_SS-FF_Flashable.zip WITHOUT WIPING ANYTHING. GOT IT TO BOOT, STILL ROOTED, ALL FILES BACK...
Thanks
Frank