i can't open diag port
no cp loggin on recovery
Related
I have a galaxy s7 edge sm-g935f (mexico telcel) and update it to android 7 (open australia) (i flash BL, AP, CP, CSC) and when you start it comes out blue screen with a triangle and says: no command then reboot happens to recovery and this legend comes out:
No support SINGLE-SKU
Supoorted API: 3
dm-verity error...
Failed code: 0x02
And that's where it goes, what can I do? thanks!
Go to Download mode again and start over... seems system partition is not in its original state.
Hi all I have a completely (no twrp, no root etc.) stock Galaxy s7 Edge G935F which is stuck in bootloop but can enter in Download Mode. I was planning to flash the stock firmware via Odin following the guide on the forum but it says to enable pin in secure startup wich I obviously cannot do. Could you please tell me how I should proceed?
Thanks
I replaced a motherboard on g935fd and to was loaded with Oreo 8. Oem unlocked ticked USB debugging as well. Magisk 19.4 flashed. That locked my bootloader up Samsung logo only on boot. So I tried a flash prerooted bootloader from supersu old site cfar_sm-g935f(8.0.0) still no luck.
Sbootin fail in Odin.
Screenshot of cell in download mode
https://www50.zippyshare.com/v/I3BzUe7S/file.html
i have this problem S7 edge g935f FRP Lock and no comand faild to open reocvery (no such fiel or directory),i tray difernt Firmware,and also extract recovery and flash separtely multipele time same erorr
I have been trying to install a new firmware using odin3. It doesn't work and it keeps showing "SW REV. CHECK FAIL(BOUTLORDER) DEVICE: 8. BINARY:1
My phone model is SM-G935F
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Ksam1 said:
My suddenly enter custom binary frp lock mode
My Samsung S7 edge model is SM-G935F. My AP SWREV shows B:8 K:6 S:7. Please, where can I download the correct firmware file that will be compatible with my phone binary?
Click to expand...
Click to collapse
Hello There!
You can download your Firmware here (https://galaxyfirmware.com/model/SM-G935F/)
while finding a firmware, you will see something like this G935FXXS8ETC1, the 9th digit is the Bootloader Version or BINARY. since your binary is 8 you should find a firmware with the same Binary. I think you can choose any region right there as long as its open-line (choosing a different region from yours might end up a slow device).
Since your BINARY IS 8, you can only download a Android 8 Firmware for your S7 Edge.
Goodluck!