Related
Hi Guys,
I've recently installed an xtrons unit. I'm looking to make a few changed but I can't see any mods that are suited to the firmware it's running?
I'm happy with the firmware it's running as its pre rooted 4.4.4 but there's a few things i'm hoping a different firmware can address (or maybe someone here has some other suggestions) So far I've side loaded google play and installed all the apps I wanted (poweramp, google maps, mail etc) I've got the nav key configured to run google maps no problem there but I'd like to control poweramp from my swc keys. (i've tried ownice's rk3188 just to check but it obviously didn't work) The default bluetooth handling app is a bit crap is there a way to change the handler? I'm pretty happy with everything else so if i can avoid changing the rom I will but it doesn't bother me if doing it will solve my issues. I've looked for an alternative rom on here but the unit is GS and I cannot find a 4.4.4 gs quad core rom to suit it? I'm new so I can't post links yet but I can provide any info needed from the hu! Thanks Guys!
Since i got a new/old car and i am not too happy with its radio right now I would like to exchange it and get an android device.
Actually right now I am a bit torn between an android unit and a pc. I know the pc is more expensive but as I read around the internet, right now it has the following advantages for me:
1. I can choose freely which hardware it has.
2. Bluetooth works fine.
3. It will support Windows 10 so i can use cortana - which will give me the option to use it more or less hands free.
4. I can use Kodi for Radio etc.
5. it might just run android as well
6. pretty much all apps are more or less available
7. with Kodi i can customize the look (in my opinion way beyond of what i could do with different launchers)
8. Kodi supports radio traffic service
Now that I have listed all the + Notes on the PC version here comes Android:
1. A lot cheaper!
2. Works out of the box.
3. I don't have to buy the apps again (as i have bought them already and use them on my phone)
4. Theoretically I can use Kodi (afaik "just" not for radio)
5. Afaik bigger community
BUT(!)
I was digging around and found following problems which i'd like to ask you guys if they are still an issue:
1.) So far no Android 6.... so no Google Voice for hands free
2.) Bluetooth is at best buggy (incomeing calls show no name from the phonebook just the number) other devices such as obd do not work or if they work only the ones from the manufacturer of the headunit will work. Bluetooth connectivity is limited to one device at a time.
3.) I am limited to the Apps from the manufacturer as far as radio goes. (i think most of the apps i have seen are ugly - i don't want to see the frequency of the station I am listening to... especially not as big as i have seen it.) DAB(+) Apps look somewhat ugly as well. There is no real chance to change that.
4.) there is no support for radio traffic service
5.) Customization is limited
My questions are:
1.) Is what I am saying still correct (for example the bluetooth issues).
2.) Does anyone know a work around for the Google Voice? Preferably without the need to press a button. Or has someone an Android 6 device and can confirm that Ok Google works fine there?
3.) Is it at all possible to implement the Radio(FM/DAB+) into Kodi on Android - has someone done this? Maybe even something like a navigation software? (yes - i am a kodi fanboy -actually more or less from day one - i had a old xbox - the first xbox running xbmc in my car with linux and a gps built in)
What I would like to have in the end would be a system where Kodi is loaded up as soon as the car starts.
Via Tasker (if possible) I would grab the infos from torque and implement them in a custom skin in kodi. I would love to listen to the radio via Kodi and if at all possible have navigation in there as well (but if that does not work I will find a workaround - i already have one in my head)
I know this is a lot and many of you might think tl;dr but if anyone could answer my questions anywhere I am convinced that it is here on the mighty xda board.
Thank you guys so much. (If I get this all to work I will of course post all of it here (skins, tasker skripts etc)
About Android vs Windows and head unit vs PC, I think you'll have to decide on that for yourself. Nobody here can tell you what's the right choice for you.
As for Kodi, I haven't dived into it much, but I have a more typical use of the head unit I guess. Google voice works in 5.1.1, but you need another launcher and you need to install the required apps from Google Play and enable everything. I have it working in mine, but decided to have it activate on a button press. I do have to switch between apps and stuff, and the BT caller app is a little quirky to use. I would've wanted something more inline with the default Google dialer, but no go on that one. Even if you install Contacts and the Google Phone app, they don't really do anything. If you want complete control over everything, then PC and Windows (or <insert OS her>) would be the best choice for you. If you want to save time and have something that is fairly easy and quick to set up out of the box, then a head unit with Android would be better.
Thx Hilari0 for your answer.
May I ask what Unit you have. What are the pitfalls? How did you manage to solve or work around the Bluetooth problems (i saw that joying for example released an update - can anyone tell me if that fixes the bluetooth problems?)
Is it more complicated than on other devices to install another launcher?
Thank you!
I have the Joying Intel 2GB/32GB head unit, the 135 variant. The bluetooth on it worked well out of the box with the update installed, but it was vastly improved following the instructions in this thread:
https://forum.xda-developers.com/an...elopment/bluetooth-settings-launcher-t3504526
Hello all, I just purchased and installed an Eonon GA2168K 10.1" LCD Android head unit. The stock launcher on this unit is terrible. I've installed Nova launcher and everything looks much better now. The issue I'm having is that the stock radio app is nowhere to be found however when I go back back to stock launcher, it is there. Not sure why it's not available in Nova. Has anybody else experienced this problem? Any help will be greatly appreciated.
Yes it is because it is a custom function for the head unit, so standard launchers can't see it.
Give FCC Car Launcher a try - it's great and should hopefully work for you
Thanks for the suggestion. I tried FCC and still no radio. My old Eonon Android unit on 4.4 didn't do this. I have also noticed that this is a very limited version of Android e.g., missing all the settings in the top drop down menu. Hopefully someone is working on a custom ROM for this unit. I really don't want to use the stock launcher.
cere1bro said:
Thanks for the suggestion. I tried FCC and still no radio. My old Eonon Android unit on 4.4 didn't do this. I have also noticed that this is a very limited version of Android e.g., missing all the settings in the top drop down menu. Hopefully someone is working on a custom ROM for this unit. I really don't want to use the stock launcher.
Click to expand...
Click to collapse
Yeah your old one would have been a MTCB with Rockchip manufactured by Klyde - this one is basically a completely different software developer and manufacturer.
What is the MCU version out of interest?
Mcu: Ts907.180712
I've also purchased this same unit. I'v tried a bunch of different launchers and all are no go for the radio app. Really driving me crazy that I can't use other launchers without losing the stock radio functionality.
zerocoolak said:
I've also purchased this same unit. I'v tried a bunch of different launchers and all are no go for the radio app. Really driving me crazy that I can't use other launchers without losing the stock radio functionality.
Click to expand...
Click to collapse
Good to hear I'm not the only one but sucks at the same time. Though I was starting to worry because I bought this unit refurbished and the software was all screwed up when I got it. It had Apex launcher installed along with a bunch of other non stock apps. These were presumably installed by the the original purchaser and Eonon didn't even bother to reset to factory settings which is something I still have not figured out how to do.
Is your drop down menu bare like mine? Mine only shows the WiFi connection.
Bluetooth is very disappointing too, can't connect anything like bluetooth headphones or a keyboard as it does not show an option to search for devices.
This is not the true android experience I was hoping for.
Ya, mine only has wifi listed in drop-down. I can connect to Bluetooth with my phone just have to go into settings menu. I like the unit, but the custom firmware and launcher that it comes with is kinda garbage. I did get in contact with the seller for the newest update, but it still has issues. Mine has the same radio app issue you described with custom launchers and will not keep a radio preset name. I can set a preset, but as soon as I select another staion whatever is displayed gets saved as that preset name on the channel I was switching from. I did update to the newest 2/21/2019 update, but my unit still has the same bugs. I bought mine through Amazon and I'm pretty sure I'm going to return it as it was not describes as published. This unit could be awesome if it had a better firmware installed on it. I can dump the firmware if anyone wants to take a look at it and possibly fix it's shortcomings.
zerocoolak said:
Ya, mine only has wifi listed in drop-down. I can connect to Bluetooth with my phone just have to go into settings menu. I like the unit, but the custom firmware and launcher that it comes with is kinda garbage. I did get in contact with the seller for the newest update, but it still has issues. Mine has the same radio app issue you described with custom launchers and will not keep a radio preset name. I can set a preset, but as soon as I select another staion whatever is displayed gets saved as that preset name on the channel I was switching from. I did update to the newest 2/21/2019 update, but my unit still has the same bugs. I bought mine through Amazon and I'm pretty sure I'm going to return it as it was not describes as published. This unit could be awesome if it had a better firmware installed on it. I can dump the firmware if anyone wants to take a look at it and possibly fix it's shortcomings.
Click to expand...
Click to collapse
I just installed a GA2168K yesterday in my 2006 GTO.
A couple things I noteced... I noticed in the included harness adapter is they have constant battery power and accessory power swapped.
Installed it with their R0008 dash cam that came with it. No DVR app. Finally found the main config menu (hidden by password 8888) and enabled DVR.
It does not detect the camera. it works fine with my GA2170. Went to their website and was looking to see if they had a different camera available, and that is the only one. However, on the R0008 camera product page it gives a list of HU's it isn't compatible with, and the GA2168K is one of those. Sent support an email, hopefully will have an answer Monday on that. The other frustration is that half the settings they show in the user manual and online, aren't showing up in the actual menu's. Hoping they can send me a newer Firmware/OS that enables those... And finally, there is no seperate control for subwoofer like there was in the GA2170 Looks like I need to buy the remote amp level control and run a new cable to the trunk
I also need to add that it is advertised as having 18 FM radio presets and 12 AM presets.
Mine is only storing 6 of each and just goes back to the beginning...
Mine has the 18 fm presets and 12 am. Just have to hit the Fm or am button to go to the next set. As for the DVR cam, I remember reading that it wasn't compatible with DVR cams in the Amazon description where I purchased mine. Specifically list the r0008.
So problems I've noticed so far. I've updated to the latest firmware provided by Eonon support.
The addition of a screen off button is nice, but the brightness settings for auto brightness are still to bright at night. I really wish they would include a brightness slider. Maybe a lower setting on the nite slider.
My wifi does not automatically connect to my phone when i turn on my hot spot. I have to manually go into wifi settings for it to start searching for a signal.
My radio presets will not save properly. They only save what is listed when I change the station. Becomes really annoying since it save whatever song data is displayed. I really would like a way to add a custom name to stations so that it doesn't just save the radio data displayed.
I also really wish I could use the radio app with another launcher like Nova. The radio app contains all the speaker adjustment controls and equaliser settings.
Edit: this is the response I got from Eonon after sending them a similar email for their developer to hopefully look into and correct some of the quirks of the firmware on this head unit for a future update.
Hi，
1, regarding the brightness, currently can not be set lower.
2. Because the WIFI hotspot of the mobile phone will automatically enter the hibernation state after being connected for a long time, when the machine is started again, the WIFI hotspot of the mobile phone is not detected. At this time, it is necessary to manually activate the WIFI hotspot to connect, we cannot change this..
3, currently does not support the storage method you said, thank you for your advice!
4. This is a problem with APP compatibility. There is no way to solve it.
Thank u so much!
Vera
Hmmmm......?
If someone wanted to work on a ROM for this headunit I'm sure I could figure out how to dump it. This head unit has some great potential but has some flaws that I wish the companies devs would fix.
5ft24 said:
I just installed a GA2168K yesterday in my 2006 GTO.
A couple things I noteced... I noticed in the included harness adapter is they have constant battery power and accessory power swapped.
Installed it with their R0008 dash cam that came with it. No DVR app. Finally found the main config menu (hidden by password 8888) and enabled DVR.
It does not detect the camera. it works fine with my GA2170. Went to their website and was looking to see if they had a different camera available, and that is the only one. However, on the R0008 camera product page it gives a list of HU's it isn't compatible with, and the GA2168K is one of those. Sent support an email, hopefully will have an answer Monday on that. The other frustration is that half the settings they show in the user manual and online, aren't showing up in the actual menu's. Hoping they can send me a newer Firmware/OS that enables those... And finally, there is no seperate control for subwoofer like there was in the GA2170 Looks like I need to buy the remote amp level control and run a new cable to the trunk
I also need to add that it is advertised as having 18 FM radio presets and 12 AM presets.
Mine is only storing 6 of each and just goes back to the beginning...
Click to expand...
Click to collapse
I have the GA9163K (the Mazda version) of this head unit. Apparently the K versions of this model, which generally come with Android 8.1.0, do not support front camera/dvr function. That's what the EONON rep told me anyway.
On my unit, in the advanced menu (code 8888) it had options to change the number of presets on each band and could be selected between 6, 12 or 18 presets on FM and 6 or 12 on AM. It also had the option to enable OT frequency, but not sure what that is as we do not use that here.
Dears,
anybody tried Eonon GA2178 - 10" Android 9 Head Unit?
I'm actually on Eonon GA2168K - 10" Android 8 Head Unit, it's a good device with minor problems.
Anytime developers fix a problem they introduce an other problem and there's no community support for MTK chipsets.
Because of this I'm evaluating the new Eonon GA2178, that is quite similar but based on Rockchip chipset.
Tks!
I found a solution to eonon with no radio,
I installed the GA2180A eonon unit last week and changed the launcher to the paid version of Car launcher by apps lab studio and found the same issue, no radio.
I was able edit the theme and create a widget with 'KWGT Kustom Widget Maker' that basically displayed a picture, I used an radio clipart png file i found with google image search and set the action when clicking the widget to run the Radio activity inside the app installed called com.ts.MainUI8. Your app and activity may be slightly different to mine. I do own the pro key for KWGT, but I don't think that matters.
This is my first post so the system won't allow me to post the google drive link to my custom widget. Feel free to message me for it. It would need modification too.
Depending on the rom installed in yours you may be able to use something like 'Activity Launcher' by Adam Szalkowski to create a shortcut directly to the activity. This is a much easier than the first option, but some roms have the ability to create shortcuts turned off. Mine did so I found widget work around.
The above could easily be adapted to launch other internal activities beside the radio.
Happy to provide more info if I'm not clear. Good luck!
C4rl0sHunt3r said:
I installed the GA2180A eonon unit last week and changed the launcher to the paid version of Car launcher by apps lab studio and found the same issue, no radio.
I was able edit the theme and create a widget with 'KWGT Kustom Widget Maker' that basically displayed a picture, I used an radio clipart png file i found with google image search and set the action when clicking the widget to run the Radio activity inside the app installed called com.ts.MainUI8. Your app and activity may be slightly different to mine. I do own the pro key for KWGT, but I don't think that matters.
This is my first post so the system won't allow me to post the google drive link to my custom widget. Feel free to message me for it. It would need modification too.
Depending on the rom installed in yours you may be able to use something like 'Activity Launcher' by Adam Szalkowski to create a shortcut directly to the activity. This is a much easier than the first option, but some roms have the ability to create shortcuts turned off. Mine did so I found widget work around.
The above could easily be adapted to launch other internal activities beside the radio.
Happy to provide more info if I'm not clear. Good luck!
Click to expand...
Click to collapse
hello , i just install the head unit and just like you i can't have the radio app to work on other laauncher exept the ''factory'' one... can you help me to make it work just like you ? or have you find a better way to achieve it ? thanks @ [email protected]
C4rl0sHunt3r said:
I installed the GA2180A eonon unit last week and changed the launcher to the paid version of Car launcher by apps lab studio and found the same issue, no radio.
I was able edit the theme and create a widget with 'KWGT Kustom Widget Maker' that basically displayed a picture, I used an radio clipart png file i found with google image search and set the action when clicking the widget to run the Radio activity inside the app installed called com.ts.MainUI8. Your app and activity may be slightly different to mine. I do own the pro key for KWGT, but I don't think that matters.
This is my first post so the system won't allow me to post the google drive link to my custom widget. Feel free to message me for it. It would need modification too.
Depending on the rom installed in yours you may be able to use something like 'Activity Launcher' by Adam Szalkowski to create a shortcut directly to the activity. This is a much easier than the first option, but some roms have the ability to create shortcuts turned off. Mine did so I found widget work around.
The above could easily be adapted to launch other internal activities beside the radio.
Happy to provide more info if I'm not clear. Good luck!
Click to expand...
Click to collapse
I would love more info on how to accomplish this, also. I have an Eonon GA9465B and can't get the radio to work with Agama launcher. Please help
[email protected]
I also have an eonon and would love to get some information [email protected]
I have an UGAR 9 in (model 8227L). It's running Android 9. And has a clunky stock user interface. I used Nova Launcher and "quickshortcutmaker" to create shortcuts to the stock apps that did not show up in my app drawer. Namely the AV-IN and radio apps. So I got that all working pretty well. However, I have not been able to figure out how to get the upper status bar to remain visible. It hides itself after one or two seconds. If you have figured out how to keep the status bar from hiding please let me know. Thank you much
C4rl0sHunt3r said:
I found a solution to eonon with no radio,
I installed the GA2180A eonon unit last week and changed the launcher to the paid version of Car launcher by apps lab studio and found the same issue, no radio.
I was able edit the theme and create a widget with 'KWGT Kustom Widget Maker' that basically displayed a picture, I used an radio clipart png file i found with google image search and set the action when clicking the widget to run the Radio activity inside the app installed called com.ts.MainUI8. Your app and activity may be slightly different to mine. I do own the pro key for KWGT, but I don't think that matters.
This is my first post so the system won't allow me to post the google drive link to my custom widget. Feel free to message me for it. It would need modification too.
Depending on the rom installed in yours you may be able to use something like 'Activity Launcher' by Adam Szalkowski to create a shortcut directly to the activity. This is a much easier than the first option, but some roms have the ability to create shortcuts turned off. Mine did so I found widget work around.
The above could easily be adapted to launch other internal activities beside the radio.
Happy to provide more info if I'm not clear. Good luck!
Click to expand...
Click to collapse
I have the same setup... Same head unit, programs, I can't get it to work. Could I get detailed directions or something? It would be greatly appreciated.
OK, not my favorite car in the world. But my mate showed off his new (to him) Volvo XC90 about 4-5 yrs old.
We sat in it for about two hours working out all the knobs n whistles and then we found the phone section.
Not only could we pair his phone, I then did mine. Plus it has option for about ten more - at the same time
Samsung S6 and Samsung S9, so nothing too special. But the realy cool thing, and I mean REALY COOL, and something I've been crying out for for ages for my humble px5 head unit, was at the click of a touch screen not only could you see recent callers, but also recent messages. This is where I would put the well n truly shocked icon !
No google crap, nag screens, warnings of the apocolypse or anything. Jjust a simple clear list of readable recent messages.
Not only that but at a simple touch of any message it was read out. No fuss or bother, no mods, plugins or crashes or freezes.
It just worked.
So why have we let google literally kick our asses for so long. Sob.
Hi, that might be because your PX5 is not Android auto but is a hacked chinese android.
Requesting mod move to Android head units section...
marchnz said:
Hi, that might be because your PX5 is not Android auto but is a hacked chinese android.
Requesting mod move to Android head units section...
Click to expand...
Click to collapse
Android auto is an general overall head group of sub groups of posts of specific catagories including the google os Android auto.
But before you move it, how about you show me show me a dedicated (android auto) head unit I can buy, that fits my car.
Mercedes w203. That runs 'Android auto' and doesn't have a ton of usless junk like play store, tracking, feedback, Adverts, usage logs, heart monitor, nag screens, privacy notices and works flawlessly as my post above describes. Whoose system IS also a android 'hacked' based system. And I wont care who makes it.
PLEASE - I will buy it.
cleverdicky said:
Android auto is an general overall head group of sub groups of posts of specific catagories including the google os Android auto.
But before you move it, how about you show me show me a dedicated (android auto) head unit I can buy, that fits my car.
Mercedes w203. That runs 'Android auto' and doesn't have a ton of usless junk like play store, tracking, feedback, Adverts, usage logs, heart monitor, nag screens, privacy notices and works flawlessly as my post above describes. Whoose system IS also a android 'hacked' based system. And I wont care who makes it.
PLEASE - I will buy it.
Click to expand...
Click to collapse
You're still confusing android auto with cheap Chinese headunits running modified versions of Android 6-10 - they are very different.
Android auto units basically mirror your phone display to the vehicle Android auto headunit display.
Official / REAL Android Auto units, without the 'junk' you describe are listed here: https://www.android.com/auto/
Since you're still not alive to the differences and comparing your PX5 hacked Chinese android headunit to an unknown type unit, mods moved your post to the appropriate android headunits sub-forum.
Suggest learning the basics and differences and then ask questions.
I would say also, that head units supporting AA are not sold separately, but they only come mounted in new cars, as part of the infotainment system. They do not have and it is not possible to install apps on them, they only become alive when connected to a mobile phone (which will be then the brains of the system).
As marchnz said, they only mirror your phone's screen.
You are talking about independent head units supporting Android operating system (which do not need AA because they are already being able to download and run appps from Play store) , and that is something else.
Sent from my SM-N975F using Tapatalk
Not quite.
I know what android auto is.
I also agree some manufatures use android as alternative to win ce to build their quality radios like Pioneer.
This is different and why I posted. Please don't assume its an either or and that I'm an idiot for mentioning it.
Volvo have used Googles android as an os without the crap 'spyware apps' and intergration to develop their OWN system. called sensus
It does not mirror a phone and run apps from it.
Although the new version does have AA and much more google integration unfortunately.
It does not require a phone to work. It has its own built in for data if need be. But also runs off line.
Its an independent system that can link to multiple paired phones for messaging and calls.
Their are no agreements and nag screen pop ups every two minutes from google. All its functions are running at once and all work together. So easy to flick from one to the other without it crashing.
Its a great system and showcases what can be done and the potential of just android as an os without googles presence and interference.
Hello,
I recently purchased this unit:
https://www.aliexpress.com/item/1005001723766214.html?spm=a2g0s.9042311.0.0.52f54c4dcVJLhn
The install was a little difficult but went okay. For some reason when I try to login to login to google playstore it automatically closes. I have tried allowing app permissions and clearing storage and cache. It says it is running Android 10 API 29 (qp1a.190711.l020). It has carlink installed but does not seem to recognize my phone. I have managed to get the Bluetooth working, but I guess I should have done more research and gotten a unit that other people have. Do I risk bricking the device if I try to flash another version of android onto it? I like the DSP and some of the features but I can't even log in to google. Also could someone tell me if this is MTCD or the other? The company is responding to my questions so far but it was really late in China when I told them I can't log in to google, so hopefully they message me with a fix tomorrow. There seems to be 4 instances of an app called "Launcher 3" and an app called "App store" that says it could ruin my device if I try to uninstall so I just disabled it. This thing seemed to have all the features on paper, 8 cores, 128gb ram, 4gb rom, DSP, dash cam, rear view cam, optical audio out, 4g antenna, external sim card, gps antenna, 5 g capability... you name it. They "accidentally" sent me the 64 gb version instead of 128gb but they sent me a free dash cam and tpms to make up for the mistake (which they denied at first). If anyone knows why google would be doing this and a fix please let me know. Big let down for 450 bucks.
Please post a picture of the system about screen for your unit, that would help determine if it is MTCD/E. You should be able to find such a screen in the settings.
You're pretty lucky that they're responding to your inquiries. There is a chance that your head unit is not running Android 10 and may be fake in many regards (e.g. running much earlier version and "claiming" to be Android 10)).
jlbooth said:
Please post a picture of the system about screen for your unit, that would help determine if it is MTCD/E. You should be able to find such a screen in the settings.
You're pretty lucky that they're responding to your inquiries. There is a chance that your head unit is not running Android 10 and may be fake in many regards (e.g. running much earlier version and "claiming" to be Android 10)).
Click to expand...
Click to collapse
Thank you for the quick response. Yeah, at least they are responding. If you click the add it looks so legit with the 8 core 64 gb 4 gb ram. But my home screen looks nothing like what they advertise.View attachment Home screen.webp
Please scroll the view up on the about screen and take another picture. It is hard to see with what looks like plastic film on the screen. Would like to see the MCU version and perhaps additional information. Thank you for posting the first picture.
Oh and my pleasure to try to help you. We need to determine for sure what the head unit is and if it's MTCD/E I along with others here in the forums would be glad to try to answer your questions and help you resolve the issues you're having.
Sorry it's super bright out. Here ya go.
The only units I could find that use that particular CPU (UIS7862) are Joying branded head units. Their units are not MTCD/E. That being said, this thread probably should be moved to Android Head Units as the discussion in that forum are for non MTCx head units.
I will offer you this suggestion regarding the Google login issue, try opening the YouTube app or Google search app and try logging in from one of those. Alternatively locate the Accounts section in the settings and see if you can login to Google from there. That may help with the Google Play launching issue. If you can get GP to launch then you will be able to get Play Services updated and other applicable updates to make the Google apps/ecosystem work.
Once you get Google Play working, I would suggest installing an app like CPU-Z to see what your system consists of.
One more thing, welcome to the XDA community.
jlbooth said:
The only units I could find that use that particular CPU (UIS7862) are Joying branded head units. Their units are not MTCD/E. That being said, this thread probably should be moved to Android Head Units as the discussion in that forum are for non MTCx head units.
I will offer you this suggestion regarding the Google login issue, try opening the YouTube app or Google search app and try logging in from one of those. Alternatively locate the Accounts section in the settings and see if you can login to Google from there. That may help with the Google Play launching issue. If you can get GP to launch then you will be able to get Play Services updated and other applicable updates to make the Google apps/ecosystem work.
Once you get Google Play working, I would suggest installing an app like CPU-Z to see what your system consists of.
One more thing, welcome to the XDA community.
Click to expand...
Click to collapse
For sure, I have heard the Joying are decent. I haven't been able to get it to interface with my phone other than viewing it as files. I cant do the mirror screen split screen that is advertised in the AliExpress ad. I tried to download Zlink apk and install it (disabled third party app restriction) and it said not installed. Maybe I need an older version than 4.0.6? Unfortunately none of your tips worked, even the google one, but thank you so much for taking the time to assist me. Hopefully the seller has a fix for this, as I am not great with android.
Requested via report to move to Android Head units forum.
Sorry that my suggestions did not work for you. I have asked the forum moderators to move this thread to the Android Head units forum where maybe someone in that forum maybe has experience with the same or similar head units as yours. Suggest searching the forums here as I'm confident that somebody has solved the Google login problems you are experiencing.
Your head unit should just work out of the box. I would not recommend updating firmware or such major changes before getting your unit working at a minimum as you expect. Thing with that is how will you know if additional problems that you might encounter are from the update vs what you have now?
marchnz said:
Requested via report to move to Android Head units forum.
Click to expand...
Click to collapse
Already done same before. Thank you.
By selecting one of the variants of launcher as the default launcher app you should be able to get the user interface to look as shown on the ad where you bought the unit. Since these devices are sold under many brand names, they often include many different launchers which is what provides the user experience seen when the system boots up.
You should find a default apps selection in the settings where you can pick the default launcher.
One more suggestion that might get it where you can login to Google would be to locate the factory reset option in the settings. Since you couldn't install any new apps on it anyway, not much to lose customization wise.
I believe there is a system patch for the FYT IS7862 units. My IDoing came working so I assume it was already patched, but if you head to the Joying thread you'll see posts about a system patch. Not sure that patch will work for your unit, I think that's what you need.
Actually, they are being pretty helpful. They just sent me an update I have yet to install (kind of afraid as it is working now and I realized I don't really need google integration. Here is a screenshot. Good to know it is a FYT IS7862 unit.
Here is the new firmware she sent me and instructions. Honestly kinda scared. She didn't tell me what I am upgrading to, she just said new version. Maybe someone could check this RAR out if they have time?
https://wetransfer.com/downloads/2f...6e4ab0a57f920b634846c7f920210515022252/aac7ff
Just for fun I went to the download page and did a screenshot of the page. I then ran the screenshot through the Google translate app. With the transition set to go from Chinese to English, the download link says "overseas system. rar".
You could possibly run the PNG file that you attached to your post thru Google translate and maybe figure out the filenames. The picture is not clear enough to do the same as the picture resolution is pretty bad. Was hoping maybe the download filename would offer some clues about what the rar file contains.
Maybe you could request from whoever sent you the link, an English version of the download if available. Granted they say something about English text showing up in green after the flash. I could totally understand your apprehension since you cannot read the filenames.
I could unrar the file and try getting filename translations, might be helpful.
Man, I really appreciate you looking into that for me. I went ahead and bit the bullet and did it and it booted up with a different theme and reset to factory settings. Seems to be dropping my home wifi connection now. I havent tried putting a sim card in the unit yet, as I only have a micro sim from my tablet. I asked her several times what we are upgrading and she said it's not the android version, but a fix to make google login work. So, I went to login to google and instead of getting hung up and crashing after the "checking info..." screen it actually had a box to type my gmail address and let me type it and press login. Then it said "Cannot contact google servers, try again later.
This 1.4 GB file seems large for a small fix. There were like three ZIP files in the rar. Also, when I look at what is using memory on the unit there are like 10 apps I didn't open in the background. Makes me feel like the mfg. has some spyware or malware on the unit. Isn't it commonplace to completely wipe one of these units clean and install a different version of android? Why couldn't I just install android 11? Is it becasue I wont be able to find the apks for unique apps and functionality on there?
They usually (never) provide system patches that fix one specific thing. By providing the whole system update it still makes it impossible to know exactly what's being installed.
Unfortunately it's not so simple to go from one version of Android to another as they intentionally make it difficult to do. It kind of puts a lifespan on these units. There's always gonna be something broken or something that will eventually break rendering the unit useless or just be a flaw that you end up accepting. Plus by limiting the Android version its planned obsolescence as updates won't always be available forever.
Maybe and it's a big maybe you can find an alternative ROM for your particular system right here on XDA. Those are becoming more and more rare because of numerous factors however.
I wouldn't recommend logging into the head unit with a Google account that has a payment method associated with it. Maybe create a whole new Google account just in case? Also you could try going somewhere that you can get free public WiFi (e.g WalMart, McDonald's, etc). All that would do is confirm it works, for what it's worth.
Regarding the wifi connectivity issue, was it able to connect to the same wifi before applying that provided update? Is the wifi signal strength good? It's likely connecting to the wifi but not getting an IP address and other connection parameters and disconnecting on failure. There is an advanced workaround that involves manually setting the network connection parameters (e.g IP address, etc) but you'd need to be comfortable with doing that sort of thing. Let me know if interested.
Despite the update essentially doing a factory reset as part of the firmware installation, I suggest manually doing a factory reset. Maybe even do the reset a couple times just to be sure. Truth is that the device should just work out of the box without the extra contortions.
Apparently the Google login problem is a common issue and there are claims of Google hacks on these units as well:
Post in thread 'New Joying Android 10 UIS7862 Octacore 1.8GHz (4GB RAM, 64GB flash)' https://forum.xda-developers.com/t/...8ghz-4gb-ram-64gb-flash.4168069/post-85003075
I was looking at one of these on Aliexpress and found this thread. @CaliBurr, do you have any updates on how this is unit is working out for you?