Database Users

Batteries shorting out on Hermes

I've had my Hermes now for 7 months, and I'm on my third battery. The OEM lasted about 6 months, the extended battery lasted 3 months.
There's no warning...just shuts off and will not turn back on...ever with those batteries. Replace the battery, and it works fine.
Anyone else have this happen? I also have a Wizard for that's a couple of years old and it's still on the original battery.

tvone said:
I've had my Hermes now for 7 months, and I'm on my third battery. The OEM lasted about 6 months, the extended battery lasted 3 months.
There's no warning...just shuts off and will not turn back on...ever with those batteries. Replace the battery, and it works fine.
Anyone else have this happen? I also have a Wizard for that's a couple of years old and it's still on the original battery.
Click to expand...
Click to collapse
Need more detail. I assume you charged it occasionally
Did you find the battery drained excessively quickly - say in just a couple of hours?
Have you ever hard reset the phone?
What happened with these batteries when you tried re-charging them?
Did you get the constant red LED when charging?
Mike

I have the same problem, it takes about 5 h to drain the batteri:-(
I start up the phone and leave it on the desk without doing anything.... and after 5 h the batteri is dead.
I have installed the latest rom, tried without the sim-card, everything!
The problem started from one day to the other.
mvh lars

mikechannon said:
Need more detail. I assume you charged it occasionally
I usually throw it on the charger every night.
Did you find the battery drained excessively quickly - say in just a couple of hours? No, the batteries behaved fine, with streaming and programs being used like word and PIE, it will last all day.
Have you ever hard reset the phone?
I've hard-reset a few times...currently running BlackIV and 1.41. The first battery died using Black 2.5 and then 3.0. BTW- love the BlackIV.
What happened with these batteries when you tried re-charging them?
Red light on the phone, and they get HOT!
Did you get the constant red LED when charging? With the dead batteries yes, with a new battery, no.
Mike
Click to expand...
Click to collapse
I now have ordered a couple of extra batteries just to have around. I don't want to have to wait a week for a battery.

tvone said:
I now have ordered a couple of extra batteries just to have around. I don't want to have to wait a week for a battery.
Click to expand...
Click to collapse
Well that's a puzzler alright. I can understand 1 maybe even two batteries ending up faulty but more than that! Now if you were just getting the red LED then we might have considered a not infrequent problem folks report here on that situation (usually caused by the battery draining to a very low level and refusing to start charging again). BUT you said your battery despite the not charging, red LED, gets hot and that I have not seen reported.
To be honest I think you may have a hardware fault (possibly intermittent that is damaging the battery. Likely sources of the fault would be the battery connections (poor contacts at battery or at m/board) or in the battery charging controller circuit. Just possible that it might be at the USB socket. Non of these apart from a routine check of the battery contacts are easy to check, which of course is a real pain if you are out of warranty.
Mike

Just a thought - but do you have access or could you aquire a desktop cradle with a slot for charging a spare battery? (Available for about £10ukp on ebay and other various places)
If you're out of warranty (or even in warranty), firstly this would give you a chance to keep your batteries charged without charging in your Hermes itself (and hopefully eliminate a hardware fault). Also, some of your knackered batteries may be "recovered" by charging them in an external charging cradle.
I had a red-light charging problem with ONE battery myself which was cured by charging the battery overnight in a cradle rather than in the device itself.
...might be worth a try?

My battery function is a little strange too, though I haven't had my 8525 long enough to have killed the battery.
I charge it on a USB cable. It charges very quickly, and when it is charged I unplug it. After this, the battery drains VERY fast and the device gets hot. It is NOT hot while charging. If the device goes into sleep mode after this, it won't wake up w/o a soft reset.
I've found that doing a soft reset right after charging fixes this behavior. It's almost like my 8525 does not realize it has been unplugged from the USB cable, and it overstresses the battery by trying to draw too much power from it.
Usually my battery will last three to four days even with heavy use, provided I soft-reset it when I'm done charging it. If I don't, it will last just a few hours -- though I typically end up having to soft reset it anyway because as I said if it goes into sleep mode after charging it, it won't come out of it w/o doing the soft reset.
It might be a good general rule to perform a soft reset after charging this thing. It's worked for me, anyway.

I also developed the dreaded white screen problem too. After talking with At&T Business Customer Service, they overnighted a new phone.
Just speculation...I think it was some type of hardware failure that caused the batteries to run hot and fail. I feel this also contributed to white screen from excessive heat.
New phone ran fine all weekend. Charging did not generate heat, and had no white screen of death.
Side note...WM5 is horrible compared to the latest WM6 upgrades found here. I couldn't wait to get this phone re-flashed!

Yeah ... it sounds like it is definitely necessary to soft-reset after charging.

Wizard suddenly died yesterday

Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,

1. how much charge was in the battery last night?
2. is your battery 20 months old also?
3. do you have a spare battery to try?
4. do you have many applications, music etc. on the device?

1. how much charge was in the battery last night?
Click to expand...
Click to collapse
Unfortunately I can't remember, however I have an alarm which sounds periodically when the battery is below 20%, so I'm guessing I had at least 20 percent. Could be wrong, of course, but most likely above 20%.
2. is your battery 20 months old also?
Click to expand...
Click to collapse
Yes, this is the original battery. Aprx. 20 months old.
3. do you have a spare battery to try?
Click to expand...
Click to collapse
I don't have that. I guess I could go to mobile phone service shack and check there. Do you think it's the battery?
4. do you have many applications, music etc. on the device?
Click to expand...
Click to collapse
The Wizard came with a 64MB card I think. I had around 10MB free space. 3-4 applications, 2-3 mp3s. Nothing unusual.

Same thing (sort of) happened to mine after about 187 months. I was using mine and it hung up. I hit the reset button and that was the end of that. Even when plugged in it does nothing. Tried a hard reset... nothing. Soft reset.... nothing. Dead. Zip. Nadda.
Good news? Replaced it with a Kaiser!

vivanov said:
Hello,
I've a Wizard that is approximately 20 months old. Yesterday, before I went to bed, I set the alarm clock on the Wizard, put it next to bed and went to sleep.
This morning upon waking up I tried to switch on the Wizard but it couldn't. Firstly, I thought the battery was discharged, so I tried charging through USB on my computer -- it wouldn't charge or start. Then, I tried charging on the default charger -- again nothing.
I tried removing battery and soft reset - nothing. It's really weird, yesterday I left it working, no-one has touched it and today it's totally non-responsive.
Any ideas what might be wrong/how can I bring it back to life? Would a hard-reset help?
Regards,
Click to expand...
Click to collapse
Mine died too when i was flashing...
Leave the phone in the original charger for a while and see if it picks up...sometimes it comes back to life by doing that...
If that doesnt work, try a new battery, you might be lucky...

A somewhat strange development occurred today:
Today (3 days after it stopping working) I randomly tried to switch the Wizard on and it indeed switched on. It showed that it had 0% battery. It didn't even show 0%, basically the battery charge graph was empty - no number, no fill, nothing.
While it was on charge the charge light was on (while it was 'broken' the charge light was off when I tried to charge). So I left it to charge and when I checked back in 15 minutes it was back to being 'dead'. Can't be started, no charge light, nada.
I don't really know what's going on, however I'm highly suspicious of the battery. Currently, I'm periodically trying to switch it on again so I can backup my data.
Any ideas what might be wrong with it, do you think it's the battery or is it more serious?
Regards,

The battery won't charge if it gets to low.
There is a thread about using a 9V battery to get the battery up to a level so it will charge. I don't have the link for it, try searching for it or maybe someone else will reply.
You might have a bad battery. I bought a new battery because I didn't think I was getting the life that I should. I tried using the old battery about a month after when I had to run out and my main was low. About 15 minuets later my phone started shutting of and rebooting. That was the end of that battery.

Yep, it's possible. If the battery is to empty, you can't charge the phone. It is stupid but it's just like that. You also can't power on the phone without a battery with the charger connected.
Yesterday I received my wizard and I had to revive my battery too because it was completely empty. I used a self made 5V power supply and after 2 minutes charging I placed the battery in the wizard and was able to charge and boot with the charger connected.

Here's the 9v battery trick, connect the + from the 9v battery to the + of the phones battery and the - to the -, hold there for only 10 seconds then remove the connection for 10 seconds and then repeat the process about 8 to 10 times and then put the battery back in the phone and connect it to the wall charger to fully charge.

Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,

vivanov said:
Thanks for the advice. I'm going to do the jump-start thing.
However, I've hard time determining which is the - and which is the + pin layout on the battery, since the label is not correctly applied.
As far as I can see the - is the one at the far right, however I'm not sure which is the + pin.
Can someone help me with this, please?
Regards,
Click to expand...
Click to collapse
When you take out the battery and put it back in that direction ,turn and face up the connector side fasing you,the first connector from the rightside of the battery is the ' + ' and the last is ' - ' towards the leftside.Be careful while connecting and try not to touch other connectors. Don't keep the connections longer then 10 seconds interval.
good luck

Xeno1,
My MDA battery also died and went below re-chargeable state. Your trick to use 9volt battery to jump-start it worked just fine for me. I connnected for about 20 seconds (2x times) and plugged it back into phone and connected USB cable to it and my nice yellow charging light came back on. After about 30 mins, I could use the phone.
THANKS FOR THE GREAT TIP!!!

easier fix, take a standard usb cable. rip off the smaller end with a wire cutter, expose the red and black wire. take out your battery, than connect the negative(black) wire to the negative end of the battery, than the red wire to the positive end of the battery, leave it in there for exactly 3-5 minutes for jump start. after that turn your wizard on, and quickly shove it inside a new usb cable. or the wall charger.
note:
if not done correctly, you may damage your wizard or the battery. if theres a power overload or your power goes out. your wizard will burn out!
feedback is greatly appreciated.
p.s after that my battery seem to be weak, charge barely holds for 12 hours. after 12-14 hours it will die out. so i suggest buying a new battery after couple of days.

Thanks guys! Vario died yesterday and wouldn't turn on or charge.
Tried the 9v battery recommended here and it worked! I was a little unsure which end was - and which was + but using the advise above, got it right. Wasn't too worried as found and ordered a replacement from ebay this morning for £7.
The first connector on the right hand side, nearest the end of the battery is the + the one more towards the middle and further away from its corresponding end is -, or at least, thats what worked for me.
Thanks again!

Experiencing the same issues after I set aside my Mini S as it was experiencing problems with regards to its screen alignment. Wasn't able to charge it during that time I kept in the drawer unused - due to frustration as I can't use it anymore. After downloading a guide to disassmble it so I could remedy the problem I found out that it won't power up anymore even with a new battery.
Well, haven't tried the jumpstart thing and the original battery was disposed of already to try the jumpstart idea. Could it be the internal battery is causing the problems? I opened my unit up and tested the internal battery for power and it registers a measly .2V left. Will use the 9V thing to power it up (as been doing that before on watch batteries that are hard to find replacements) before I do it on the main battery. Here's hoping it works as the Mini S has been quite useful for me until now.
UPDATE: I charged the internal battery and it now reads 1+ V and the external battery at 3+ V. No luck yet though as the unit still won't show any life. Any suggestions?

Vivanov, I know it's been a few years now, but did you end up fixing your problem? If so, how?

Bricked, perchance? - TyTN won't boot

Hey all,
Having served me faithfully for 18 months now, my TyTN has finally given up the ghost. It refuses outright to boot.
Not a splash screen, not a backlight, no response at all no matter how long I hold that power button down.
When I plug it into the mains it displays reddish on the right hand LED, having left it plugged in for a while it stops displaying even that until I unplug it and re-plug it.
I've tested the battery with a voltmeter and the power on the phone with a circuit checker, there's not broken circuitry and the battery certainly generates a current.
Though it's not TOO urgent, as I have a backup phone (Nokia 3220, ugh) unlocked and in use, and it's not TOO horrible as I was about to order a Touch Pro anyway, I'd like to keep it strictly unbricked either for sale or for backup.
Any thoughts on either:
1. What the problem is, I'm absolutely baffled.
2. How I might go about fixing it.
Thanks, Forlornity

If its only displaying a red LED when you plug it in that generally means that the power sensor has been confused or the battery isn't touching the contacts properly.
Are you using the supplied charger or a 3rd party one/usb connection. The usb and most 3rd party chargers don't deliver the right charge. If its underpowered it may not trip the charging sensor.
Try pushing the battery tightly against the contacts, I had a problem whereby the contacts had been pushed in so the battery didn't connect properly.
Clean the contacts with a cotton bud and isopropyl alcohol (surgical spirits) to remove any corrosion. DON'T USE METHYLATED SPIRITS!!! It leaves a residue.
Thats all I can think of now.
Cheers...

Isopropyl you say?
It's a pity, I've actually got meths handy.
I'm using the stock charger, I suspect I might be suffering a RLOD, but none of the usual methods are working...
I'm gonna see if I can get hold of a charging dock for the battery from expansys or suchlike (unless anyone knows anywhere better?), see if that does the trick, if not, new battery, then if THAT fails I'll have no idea
Thanks for the tip on the isopropyl!

forlornity said:
Isopropyl you say?
It's a pity, I've actually got meths handy.
I'm using the stock charger, I suspect I might be suffering a RLOD, but none of the usual methods are working...
I'm gonna see if I can get hold of a charging dock for the battery from expansys or suchlike (unless anyone knows anywhere better?), see if that does the trick, if not, new battery, then if THAT fails I'll have no idea
Thanks for the tip on the isopropyl!
Click to expand...
Click to collapse
I have the same problem, and new battery didnt help! anyone got solution for this problem? I menage to charge battery with 2 wires, and phone starts, but it wont charge! i mean orange led is on, and it says CHARGING, but battery % is going down down until it reaches 0%!

Think I found a bad flaw in the design of the HD2.

Okay so I got my phone about a month ago, I had kept it stock for a week, went to a custom rom, and put it back to stock today.
Reasoning I went back to stock:
So I had been having an issue of not charging when I plug in the charger, the phone would recongized that it had been plugged in by bumping the battery meter to 100% instead of a charging icon. The LED light was blinking orange & green so I knew something wasn't right. I then proceeded to unplug the charger and saw that the 100% knocked down to 6% which it was at 8% when I plugged it in. After I saw that I removed the battery and tried a different battery ( brother has the same phone) and his was at 70% and I plugged in the charger and still the same thing happened.
So after this I have found out that it was the phone that had the issue as it was not charging the battery at all so I then returned to stock rom using my brothers battery and it still had the same issue.
I then saw the middle contact of the three golden contact on the back of the phone was sticking between the phone and the battery so I pulled out the battery and pushed the contact toward the phone and then I insert the battery back into the phone and then place the charger on it and then it started charging.
So now I need to confirm that this was the actual fix. Can anyone confirm that the middle contact is the actual one that charges the phone or was this just luck of the draw?
sorry for the long post but I thought this would be a big deal based on the design of the contacts aren't the best.

rlacsamana1989 said:
Okay so I got my phone about a month ago, I had kept it stock for a week, went to a custom rom, and put it back to stock today.
Reasoning I went back to stock:
So I had been having an issue of not charging when I plug in the charger, the phone would recongized that it had been plugged in by bumping the battery meter to 100% instead of a charging icon. The LED light was blinking orange & green so I knew something wasn't right. I then proceeded to unplug the charger and saw that the 100% knocked down to 6% which it was at 8% when I plugged it in. After I saw that I removed the battery and tried a different battery ( brother has the same phone) and his was at 70% and I plugged in the charger and still the same thing happened.
So after this I have found out that it was the phone that had the issue as it was not charging the battery at all so I then returned to stock rom using my brothers battery and it still had the same issue.
I then saw the middle contact of the three golden contact on the back of the phone was sticking between the phone and the battery so I pulled out the battery and pushed the contact toward the phone and then I insert the battery back into the phone and then place the charger on it and then it started charging.
So now I need to confirm that this was the actual fix. Can anyone confirm that the middle contact is the actual one that charges the phone or was this just luck of the draw?
sorry for the long post but I thought this would be a big deal based on the design of the contacts aren't the best.
Click to expand...
Click to collapse
On most cell phone battery packs the center contact(s) are a data or temp sensor connection, the power is input during charging and drawn during use from the outer contacts.
It depends on how "smart" the battery pack is that determines exactly what those center contact(s) do. In sophisticated packs there is actually circuity inside the battery back that monitors voltage, current draw and temp on the battery to determine the battery's charge status and communicates this back to the phone over a serial data bus with those contacts. on simple battery packs the center contacts are simply connections to a thermistor to monitor the battery's temp during the charging cycle, so the phone can cut off charging power if the battery starts to overheat.
In the end, yes, if the phone cant get a connection to those center contacts, it likely will not initiate a charge cycle. Attempting to charge a lithium ion with no way to monitor it is just asking for fire or explosion

d0ug's point above is backed up by the fact that several users have had issues with charging and/or booting the HD2 when that one middle pin gets bent (which seems like a fairly common occurance in this phone).

Ok, so i have been having the same issue and couldnt find any information till now.
Custom rom or not, if the middle term gets bent it will not charge right, also if the battery gets warm to a certain point it will shut off on you. I have also noticed, if your battery is below 50% and your using it intensively it will also stop charging the battery. When the status gets bumped up to 100% the led's will flash between red and green, this usually means there is an issue between the battery being over save charging temp, or a malfunction of the data sensor circuit in the battery. This is built into the hardware of the phone and is a safety measure.
This is from HTC Tech support this morning.
If any one elst can find out anything, im sure there would be people glad to hear.
Too bad the terminal being bent is from having to pull out the battery all the time

acessford101 said:
Ok, so i have been having the same issue and couldnt find any information till now.
Custom rom or not, if the middle term gets bent it will not charge right, also if the battery gets warm to a certain point it will shut off on you. I have also noticed, if your battery is below 50% and your using it intensively it will also stop charging the battery. When the status gets bumped up to 100% the led's will flash between red and green, this usually means there is an issue between the battery being over save charging temp, or a malfunction of the data sensor circuit in the battery. This is built into the hardware of the phone and is a safety measure.
This is from HTC Tech support this morning.
If any one elst can find out anything, im sure there would be people glad to hear.
Too bad the terminal being bent is from having to pull out the battery all the time
Click to expand...
Click to collapse
I've never had to pull the battery when it freezes. I just hit the red reset button. Is that not working for people?

crisisinthecity said:
I've never had to pull the battery when it freezes. I just hit the red reset button. Is that not working for people?
Click to expand...
Click to collapse
In my case, I just never have anything pointy enough to press the reset button, at least not as handy as just sliding the batt up and out by an inch or so. I think out of all the soft-resets I've done on my HD2, maybe 2 were by pushing the little button (yellow in my case)

hmm, i just checked my center pin, its still good. Like someone said above, i also reset my phone by just poping the battery out.
Also in the same situation that i usually don't have anything around to poke the reset button. I don't think ive ever actually used the reset button yet. All my previous WinMo phones had a stylus and the reset button was on the outside of the device, no battery cover removal, so the reset button was convenient to use. Battery removal seems like the simplest thing to do, if you're already removing the battery cover, just pop out the battery
How often are you guys having to reset your phones that way that you are damaging the pin, are you rocking the battery into it, or kind of just pushing it in? i noticed that the contacts seem to only fold down, they don't fold up or push in.
Ill definitely keep in mind now to put the battery in with a slightly downward motion to make sure the pins fold down, and don't get mashed in, which is where im guessing the bending is happening for you guys

My left pin got bent from all the battery pulls I've been doing. I think it happens when you don't slide it in at the right angle as d0ug has suggested. Now every time I do it, I make sure that all the pins are contacting correctly. If my left pin gets bent outward, the phone does not power up at all. (which made me freak out thinkin I broke it) Both stock and cooked ROMs have required battery pulls occasionally. Overall, I think I have to do battery pulls WAY WAY WAY more than I did with my previous MT3G. So far I have tried Kumars and Elegancia ROMs. I wish I could find a stable ROM that requires zero battery pulls. =T

yupp had the same problem with the connectors under the battery

I went in for a refurb and used it for a day and that pin was already bent so i went back in and this one seems to be in good working condition.
I think they should have done better job with the pins as I have never had these issues with any other phone.

WOW!! that fixed my problem.

*sniff* I love you guys! Thnx for the fix!
I'm trying out a couple of HD2s that an acquaintance had no business getting and is now looking to unload. The one is practically right out the box, the other looks like it has been around the DC loop a few times. I'm testing the well travelled one out when it looked like it needed charging, so I plug it in and start looking at the nice one. After 2hrs, I hear the tramp vibrate. When I go to see why it vibrated, it won't turn on again! It's after midnight, I haven't purchased it yet, haven't loaded a cooked ROM, haven't even run a stock update and it's already screwing up!?!? Since I had two I did some battery swaping then both went into boot loops. Many hours and a few gray hairs later, I got them both working again. I left them essentially alone until today. When the spouse went to sync the well-used of the HD2s, he noticed it needed charging. After almost an hour, he noticed that it had less charge than when he plugged it in. I noticed the charge light wasn't steady, it's flipping between red, green and nuttin'. My spouse, who had already laid claim to this HD2, did as he always does and jumped to the worst conclusion. I said make no inferences until we get home and check this forum. I knew you'd have the answer and you did not fail me! Best yet, it cost me nuttin' to fix!! Now do I point this out as a flaw for potentially lowering the sale price?
Thanks again!!

My take on this is that the flaw is in the way the battery wants to come out. When you lift using the tab on the left side, it tries to come out at an angle, angling from top left to bottom right, which means the connectors come away unevenly, and since the connector plates on the battery are inset, the plastic of the battery casing catches the pins as the battery rotates on its way up.
I keep my thumb on the battery just above the sim card until the battery is out about 45 degrees both top left and top right, and then pull it towards the top of the phone so the connectors all come away evenly, rather than being dragged up and over the pins.

[Q] Nexus 4 bricked? Tried everything.

12.

Not everything my friend
Just charge the battery for some HOURS or over the night. All the described symptoms indicate a low battery to me.
cheers

UPDATE:
Just managed to unlock a bootloader in that short period of time i can get to fastboot. But still no change, phone wont stay in fastboot.

greg17477 said:
Not everything my friend
Just charge the battery for some HOURS or over the night. All the described symptoms indicate a low battery to me.
cheers
Click to expand...
Click to collapse
Well, i actaully tried to leave it plugged over night. But i think it stops charging right after the red light dissapears, which happens after 15mins or so after plugging. Btw, i mentioned earlier that battery shows 3.7V when measured with multimeter, so the battery doesn't seem to be the culprit... or does it...?

12

your battery is drained below safe line....to 0%. They warn you NOT to update it with less than 60% battery FOR A REASON!!
Friends case she managed to charge ger asus 7 memopad with non-removable bat to 60% after 8 HOURS, because of a bloatware wakelock drainage to 0% after a factory reset....
If that doesn't work you have to either recharge the battery manually (something like car batteries, you have to unsolder the battery connector because the battery doesnt have 2 gold squares that touch the gold pins like the removable ones, or get a new battery.
Li-Po batteries should never be discharged to 0%, and can make problems if they are not removable (Nexus 4)

Mashed_Potatoes said:
your battery is drained below safe line....to 0%. They warn you NOT to update it with less than 60% battery FOR A REASON!!
Friends case she managed to charge ger asus 7 memopad with non-removable bat to 60% after 8 HOURS, because of a bloatware wakelock drainage to 0% after a factory reset....
If that doesn't work you have to either recharge the battery manually (something like car batteries, you have to unsolder the battery connector because the battery doesnt have 2 gold squares that touch the gold pins like the removable ones, or get a new battery.
Li-Po batteries should never be discharged to 0%, and can make problems if they are not removable (Nexus 4)
Click to expand...
Click to collapse
I did manage to charge it manually with two small wires and an old Nokia charger, when checking battery with multimeter after a few minutes of charging seems to increase voltage. But i guess if the chip on battery is fried there is nothing more i can do.
I will try to leave the phone on charger all night once again, see if that makes a difference, and update if anything changes.

take off the back, disconnect the battery connector wire and connect it again, put it on charger and see if things change

UPDATE:
Leaving it to charge overnight didn't have any effect. Any other suggestions than changing a battery?

Nah, sorry, but i am out of ideas. You basically tried it all :/

Darkis said:
I know there is a lot of threads about bricked N4's, and i can assure you that I have viewed each and every one of them, but i still can't resolve my broblem.
This whole brick situation happened after trying to update to Android 4.3 OTA update, the phone didn't complete the process and turned off, where red light of death happened.
So the scenario goes like this:
If i hold POWER button for ~30s when phone is off charger i only get a Google logo for 2 sec, and phone instantly restarts
Holding PWR+VOL-DOWN buttons when phone is off charger doesn't do anything
Plugging phone to charge (socket or PC) results in solid red light
Holding PWR+VOL-DOWN or PWR+VOL-DOWN+VOL-UP for ~15s makes the red light blink at a steady rate
While continuing to hold the respective buttons and pluging the charger off, and on again gets me to bootloader or download mode (depending on button combo) for ~2s and phone restarts.
I tried removing and inserting the battery 3 times. One time i got blinking red light when plugged the charger in. Second time i got solid red light and third time got solid red light again
I tried charging the battery directly for 15 minutes with old Nokia charger, and it resulted in something different(when i assembled the phone and tried to turn it on with PWR+VOL-DOWN buttons when charger was plugged off, i got to bootloader for 2seconds before phone restarted, i tried to boot second time and the same thing happened, but when i tried it third time i got nothing, just like before) so this was the first time i got into bootloader while not charging a phone.
*My PC seems to pick up the phone for a brief moment when it is in bootloader and starts installing the drivers. Drivers gets installed when i'm in download mode for that brief moment too.
**Phone doesn't get to the white or red battery icon while plugged to charge.
***Solid red light dissapears after charging for ~10mins, but phone won't do anything.
****When measured with a multimeter battery shows 3.7V
I hope someone will be able to help me with this, as it is frustrating as f*ck. I don't have a working warranty, so fixing the N4 isn't an option, and where i live phone repair prices are over the roof (ex. motherboard change for N4 costs ~270$ ).
Click to expand...
Click to collapse
I had the same problem. Kept it on the charger for a whole day and still only the Red Light.
Took it to a local shop and they said there is a short circuit in the antenna
Took it to the LG Service center and they said my motherboard is gone.
Both were costing a bomb to repair and still there was no guarantee.
IMHO, get a new phone.
Sorry

Have you tried charging it with a wireless charging pad? I got mine to boot after I did that. Your battery is drained and it doesn't have enough juice to charge itself.

12

Don't fall for the motherboard dead trick. Just a way to steal your money.... change the battery and never let it go to 1%

12